Used Pickling Injector for sale (194)

Condition: good (used), Year of construction: 2017, functionality: fully functional, total length: 75 mm, total width: 15 mm, Equipment: cooling unit, System components: -Basin -Transport trolley -Filter -Rectifier -Product carrier -2x supply air system -3x exhaust air system -Cooling system Technical data - 1 (line) - 1 X (wet converter) Cr Active - 111 Deco Chrome 112, 113, 114 Free-standing sink 114 Rinsing 116,117,118 Warm rinse 123 Dryer 124, 125, 126, 127 Storage 129 - 141 Unloading correction station 142 - 150 El. stripping 151 - 154 Rinsing 155, 156 Nitric stripping 157 - 161 Rinsing 162, 163 Warm rinse 164 Dryer 165 Storage 166 - 172 Loading correction station 173 - 181 Storage 182 - 209 - - 2 (Line) Rinsing 394, 393 PNS 392 Rinsing 391, 390 MPS 389 Rinsing 388, 387 Free space 386 Satin 385 - 383 Rinsing 382 - 378 Bright NI 377 - 374 Semi-bright 373 - 370 Rinsing 369 - 367 Pickling 366 Anodes 365 - 363 Rinsing 362, 361 Copper 360 - 349 Rinsing 348 - 346 Chem. Ni 345 - 342 Rinsing 341 - 339 Accelerator 338, 337 Rinse 336 - 334 Activate 333 - 330 Pre-diver 329 Hfsdpjv Ernfsfx Ag Dsr Rinse 328 - 326 Chrome Red. 325 Rinse 324 - 322 Stand sink 321 Pickling ABSPC 320 -318 Free space 317 Pickling ABS 316 - 314 Rinse 313, 312 Pre-cleaning 311 Dry converter 310

Condition: used, functionality: fully functional, Thermo Electron Trace GC Ultra.Software +2000 euros. TRACE GC Ultra Gas Chromatograph is designed to be easily configured with up to two injectors and three detectors. The Thermo Scientific TRACE GC Ultra multi-channel gas chromatograph was developed for the evolving requirements of modern laboratories. With the most complete range of proprietary inlets, sensitive detection systems, smart accessories, and ancillary devices, the Ultra platform features unique technologies that raise the standards of speed, sensitivity and separation in gas chromatography. Features: Simple, rugged hardware. Internal LAN interfacing capability. Independently heated valve housing able to accommodate up to 4 heated/2 unheated gas valves, 8 pressure regulators, 8 needle valves, In/out ports, packed and capillary columns. Range of Large Volume techniques overcomes sensitivity boundaries of conventional GC. Linear heating rate up to 1200°C/min. reduces sample run times for crude oils, pesticides and hydrocarbons determination as well as food and flavor characterizations. High temperature programming up to 20°C/s and fast cooling times of approximately one minute. Precise retention time control. Hodpfxjt U Su Te Ag Dsfr Large Volume split/splitless technique using standard splitless injector extends sample injection volume of conventional GC methods without additional investment, training or revalidation of methods. Supports range of injectors, including BEST PTV, cold on-column inlets and detector soltuions for conventional GC and GC/MS. Provides in-series, staked or parallel configurations of up to three detectors featuring different selectivity. Good working condition. Please check out our other listings as well.

Condition: used, mileage: 669,852 km, first registration: 05/2010, fuel type: diesel, color: blue, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, tail-lift, * Our internal number: 1058 * MAN TGS 26.440 Hsdpsvdhurofx Ag Dofr * FIRST HAND * All repairs were carried out in an external workshop, including customer service - invoices are available. * New front axle brakes including discs at 653,745 km * New batteries at 622,854 km * New rear axle brakes at 610,516 km * New combination cylinder at 610,516 km * Valve cover gasket replaced,... * AdBlue injector replaced,... * Service,... * Invoices for EUR 21,200 are available * Trailer hitch * BÄR tail lift * 669,852 km - Original * etc. * All information without guarantee * We reserve the right to sell the vehicle prior to purchase * Please refer to our terms and conditions

Condition: like new (used), Year of construction: 2008, operating hours: 8,348 h, functionality: fully functional, machine/vehicle number: 2887, pressure: 8.5 bar, power: 2.276 kW (3.09 HP), operating pressure: 8 bar, temperature: 176 °C, total height: 2,950 mm, total length: 5,100 mm, nominal heat output: 2.276 kW (3.09 HP), total width: 2,400 mm, empty load weight: 6,500 kg, Equipment: CE marking, ATTSU RL3000/8 steam generator on sale. The steam generator is in very good conditions and has a low mileage of 8348 operating hours. The generator was used in a factory of pickled vegetables which stopped activity. The boiler has been kept preserved ever since. The boiler includes a fuel oil burner (optional), but can be fired with gas. An inspection on the boiler was performed in June 2025 by a boiler specialist which include thickness measurements and pressure test. The test results were favourable. Boiler Datasheet Manufacturer: ATTSU Model: RL 3000/8 (tube fired) Hfsdpswxd Atsfx Ag Der Burner: Fuel oil Serial Number: 2887 Steam Production: 3000 kg/h of saturated steam Rated Pressure: 8.3 bar Test Pressure: 12.5 bar Volume: 3125 liters Year of Manufacture: 2008

Condition: like new (used), Equipment: type plate available, Used stainless steel transport container Prepared for agitator Type: SBPA150 Hodpfx Aer A Engjg Dsfr Item number: 10796 Volume: 173 liters Type: Upright design on pallet Design: Single-walled, 1.5mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin-finished outside, IIId inside Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: 1/2 hinged lid Underbody: dished bottom with outlet bead Tank dimensions: Tank diameter: 650mm Total height: 815mm Pallet: 675 x 719mm Equipment: 1x 1/2 hinged lid on the top, latching function (lid can be latched in open 90° position) Stainless steel sheet metal grates underneath the hinged lid, screwed, removable DN50 ball valve outlet fitting DIN11851 Galvanized transport pallet Type plate

Condition: new, functionality: fully functional, TECHNICAL SPECIFICATIONS - Effective capacity: 1,520 litres - Cylindrical-conical bottom - Top hatch with quick-release closure, diameter 400 mm - DIN 50 stainless steel safety valve - Refilling column with removable washing ball and 2" Tri-Clamp butterfly valve - Ladder support - Cooling jacket H. 900 mm - Maximum pressure on honeycomb belt: 3 bar - Thermometer - DIN 15 stainless steel taster - Clear draining on the cone with stainless steel butterfly valve, 2" Tri-Clamp connection - 4 adjustable feet with reinforcement bars - Total drainage with 90° elbow + stainless steel butterfly valve, 2" Tri-Clamp connection - Socket for PT 100 probe - 2 lifting rings - Exterior finish: brushed Hfedpfx Aowvrmnog Djr - Interior finish: BA polished, pickled and passivated weld DIMENSIONS - Total height: 2850 mm - Diameter: 1084 mm - Thickness: 20/10ᵉ

Condition: used, mileage: 310,000 km, power: 294 kW (399.73 HP), first registration: 06/2015, fuel type: diesel, overall weight: 26,000 kg, tire size: -, axle configuration: 6x2, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2015, Equipment: air conditioning, ref: 9535874 MAN TGS 6X2 400CV AUTOMATIC GEARBOX POLYBENNE AMPIROLL VEHICLE FULLY SERVICED WITH MINES VALIDITY 10/2025 AUTOMATIC AIR CONDITIONING REAR AIR SUSPENSION MG COUPLING 2 BEACON HYDRAULIC BAE MARREL ARM SLIDING JIB WITH FRONT ARM LOCKING IDEAL FOR CRANE ON CRADLE 10000? ht of work carried out on this vehicle. Preparation vo for passage to the Mines. Loading, Passage to the brake bench and play plate. Check 4-way valve and independence of the tanks. Check absence of play on the running gear and steering. Check condition of the brakes and adjustment. Vehicle set up, chassis wedged, removal of second axle suspension cushions and replacement reassembly. Chassis air leak repair. Hydraulic leak repair, pump removal, reconditioning reassembly. Replacement of stem axle. Catalyst removal to replace protective sheet metal, reassembly of the assembly. Removal and replacement of wishbone arm. Door panel removal, left handle replacement, reassembly of the assembly. Testing with a case to analyse engine faults, diesel fuel injector return check. Supercharging circuit leak check, sensor removal, replacement, reassembly, road test OK. Lighting and signalling check and repair, bringing into conformity. Engine, gearbox, axle oil change, diesel fuel, cabin air filters, dryer. Level check. Windscreen removal, gluing and refitting. Axle 1 ball joints and steering rod. New axle 3 suspension cushions. Presentation to the mines. Air conditioning Sunroof Lifting axle Power take-off Power: 400CV DIN Hedpfx Agjnwir Rj Defr Brand arm: MARREL Power: 294kW

Condition: used, Year of construction: 2008, power: 226 kW (307.27 HP), gearing type: other, fuel type: diesel, first registration: 01/2008, mileage: 133,000 km, driver cabin: other, emission class: euro4, Vehicle location: Bovenden, environmental badge green approx. 133,000 km run, Torque Reduction: TR40, Prop. Version: 21042761, Max. Torque: 1.530 Nm, Rated Power: 226 KW, Rated Power Speed: 1.900 rpm, Displace Ment. 9,4 liter, Lowible 590-710 rpm, Injector Type: E3-1, Exhaust Brake. VEB ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hfsdpovhhnaefx Ag Der - .

Condition: new, Year of construction: 2024, functionality: fully functional, Price for the purchase of a powder coating system - Negotiable !!! - Electrical data 100-240V 50-60Hz - Powder absorption up to 200g / min - Air consumption up to 250L / min at 6 bar - Air quality / vapor less than 1.3 g / nm3 - Air quality / oil less than 0.1 mg / nm3 Hsdpfx Aog U I Ugeg Dsfr Powder coating gun data - Output voltage 100 kV - max. output current 100 µA - Length of hose 6 m - antistatic hose - Polarization Negative - Conformity ATEX 2mJ Description of hose - Applicator for quick color changes directly from the box - Intuitive 7" touch display - Automatic cleaning function - gun rinsing - Up to 20 user-defined programs - 3 automatic programs - Remote control of the paint quantity and program change from the handpiece -- Equipment - Controller of the PSS series - ProfiJector RI-1 blunt powder injector - ProfiGun powder gun with quick coupling and remote control - One set of hoses - Stand with vibrator and suction unit with fluidization PSS driver - 7-inch touch panel that can be operated with a glove - 3 automatic programs (overpainting, hard-to-reach surfaces, flat surfaces) - Graduation in 0.1kV and 0.1uA steps - Advanced pneumatic valves for air dose control (romer - patent pending) - The actual air flow measurement reacts to errors such as pressure loss or blockage of the system - Advanced diagnostic tools - Ability to name programs - Ability to control external master controllers with ModBus protocol (A-Series) ProfiGun PM-1 gun - A lightweight ergonomic gun, perfectly balanced with a contoured handle - The ceramic cascade with a voltage of up to 100,000V efficiently loads all types of powders - The new generation of nozzles ensures perfect powder penetration into complex shapes - The profiled nut provides a good grip - The conductive handle with high carbon content provides excellent grounding for the painter - The spray gun is made of special materials with increased impact resistance - Fully demountable design with replaceable powder path tube - The spray gun is patented in the USA and the EU - Cascade polarity - negative ProfiJector powder coating pump Description of the pump - Design of a new efficient injector - The most effective feed angle proven by research - Saves paint and air compared to right angle injectors - It is characterized by relatively low operating costs compared to other pumps - The injector is covered by a European patent

Year of construction: 2025, condition: new, Spray Cleaning System - Parts Washing System - Hodpfx Aswitvqog Defr NEW SYSTEM / Pilot Plant Basket dimensions (octagonal): 1,287 mm Basket diagonal: 1,393 mm Useful height: 900 mm Max. loading weight: 600 kg Tank volume: 500 liters, spray pressure: 5 bar, 400 l/min. Heatable up to 90°C System made entirely of stainless steel 1.4301 (AISI 304) and dip-pickled Including loading trolley in front of the system Included special equipment: - Steam extraction including condensate return - Automatic Water refill and level monitoring - Removable coarse filter in the return line to the wash tank - Removable basket surround - Preparation for retrofitting an oil separator - Weekly timer for heating - Electric spray pipe for optimized component cleaning - Inspection hatch in the tank area - Siemens S7 1200 control system with color touch panel, manufactured by Weintek Upon request, commissioning can be carried out by qualified personnel for an additional charge.

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Hfsdpev Ha Uisfx Ag Der Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: good (used), mileage: 202,500 km, first registration: 10/1995, fuel type: diesel, tire size: 11R22,5, axle configuration: 4x4, wheelbase: 3,250 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 1995, Equipment: ABS, all wheel drive, differential lock, trailer coupling, = Further options and accessories = - 8-speed manual gearbox - Heated exterior mirrors - LEAF SUSPENSION - Driver comfort seats - Differential lock - Electrically adjustable exterior mirrors - Speed limiter - Hydraulic system - Hub reduction - Radio/CD player - Toolbox - Power take-off shaft (PTO) - Power take-off shaft (PTO) - Tow bar = Remarks = GOOD CONDITION IVECO EUROCARGO 135E23WR 4x4 CONTAINER TRUCK (EURO 2) WITH FULL STEEL SUSPENSION & REDUCTION AXLES!! 230HP, EURO 2, 6-CILINDER ENGINE (MECHANICAL PUMP AND INJECTORS)!! ZF-MANUAL GEARBOX!! FULL STEEL SUSPENSION!! REDUCTION AXLES!! P.T.O.!! ETC!! 12,000 KG. MEILLER CONTAINER SYSTEM!! TRUCK IS IN GOOD DRIVING & WORKING CONDITION, READY FOR THE HEAVY JOBS!! MORE IVECO 4x2 / 4x4 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!! (>85 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, LOADING, TRANSIT REGISTRATION OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY MOVIE ON YOUTUBE FOR THE FIRST IMPRESSION!! ( ) YOU CAN ALSO CHECK OUR WEBSITE; ANGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = More information = Technical information Number of cylinders: 6 Engine displacement: 8,990 cc Drivetrain Fuel tank: 200 liters Gearbox Gearbox: ZF 8 GEARS MANUAL GEARBOX, 8 gears, manual gearbox Axle configuration Brakes: Drum brakes Suspension: Leaf spring Front axle: Tire size: 11R22.5; Differential lock; Max. axle load: 7500 kg; Steered; Tire profile left: 30%; Tire profile right: 30%; Reduction: Outer planetary axles Rear axle: Tire size: 315/80R22.5; Twin tires; Differential lock; Max. axle load: 13000 kg; Tire profile left inside: 40%; Tire profile left outside: 40%; Tire profile right inside: 40%; Tire profile right outside: 40%; Reduction: external planetary axles Weights Empty weight: 7,270 kg Payload: 7,730 kg GVW: 15,000 kg Functional Brand of body: MEILLER 12,000 KG. PORTAL CONTAINER SYSTEM Height of loading area: 140 cm Condition Technical condition: good Visual condition: good Hedpfeuy I Egjx Ag Djfr Further information Contact Sales Department or Erik Engel for further information.

Condition: excellent (used), Year of construction: 2013, CNC in-line machine composed of: Hsdpfskzlkyjx Ag Defr - Upper gluing unit equipped with no. 8 injectors for the automatic application of glue. - Shelf support inserting unit equipped with no. 8 vertical gravity-fed magazines for the automatic feeding of shelf supports. The machine is completed with: - Infeed roller conveyor for loading the workpieces - Outfeed roller conveyor for unloading the processed pieces

Condition: used, total width: 13,500 mm, total height: 4,500 mm, total length: 30,500 mm, Processes used: Nickel Chromium Nickel-phosphorus Sulfuric acid pickling Hfjdpfev Umkyjx Ag Dor Software ICOM Automation GmbH

Year of construction: 2004, condition: good (used), functionality: limited functionality, Color blue hammer finish Operating voltage: 3 x 400 V + N + PE / 50/60 Hz Version with hinged tilting hood, for easy loading of the system with a crane or forklift truck. - Tilting hood, automatically opens pneumatically up to an angle of 90°, with integrated viewing window, equipped with safety and wear glass, in a quick-change frame. Operation via push button (two-hand control) on the switch and control cabinet. For easy crane or forklift truck loading. - Dirt collection drawer with sieve in the funnel, for collecting coarse, blasted contaminants. - Work platform, hinged, 1 bar, height 220 mm. - Blasting gun unit, type EF 4, with hard metal blasting nozzle HSD 8/15 for large-area blasting work, adjustable using a pressure reducing valve, 0 - 8.5 bar, blasting pressure can be read on the pressure gauge. - Blasting gun and blow-out gun wall holder, permanently mounted between the arm openings on the tilting hood. - Blasting agent pre-acceleration with feed injector unit, adjustable using a pressure reducing valve, 0 to 4 bar, feed pressure can be read on the pressure gauge. - Automatic, selective fine grain separation unit, type SHOT SEPARATOR. - Blow-out gun, for practically dust-free removal of the processed parts. - Separately arranged switch and control cabinet, swiveling, with separately arranged electrical, electronic and pneumatic control units as well as all operating and control elements. - Main switch, on / off. - Key switch, on/off, with 2 keys. - Operating hour counter. - Separately installed high-surface microfilter unit, Hjdovpvn Rjpfx Ag Defr type IMF-2, with automatic, electro-pneumatic filter cleaning. Fan electronically infinitely adjustable. Including integrated dust collection bucket, mobile. - Drain basin for blasting media. - Blasting media scoop, for easy filling of the blasting media into the microblasting system. - Side loading doors. - Turntable unit made of aluminum Ø 1,000 mm, for piece weights up to maximum 300 kg, manually rotatable. - Blasting media drying system, 50 W.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high pressure cleaner. Hfodpfx Agshf Na Se Djr This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11,2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Standard accessories included.

Condition: like new (used), Used heatable/coolable stainless steel container Type: STOC3300TPRW Item number: 10844 Hfsdpfx Aeuy Ribog Dor Volume: Approx. 3300 liters Type: Upright design on three height-adjustable feet Design: Single-walled with thermoplate Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished outside, BA (IIId) inside Internal weld seams: Pickled, passivated and brushed Max. Operating pressure: Atmospheric Max. Operating pressure thermoplate: 1.8 bar Max. Operating temperature: 95°C Top plate: 15° conical bottom Bottom: conical bottom 15° with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2430mm Equipment: 1x Ø 500mm manhole cover with swivel bracket on the top, EPDM seal 1x ladder bracket 1x thermoplate on cylinder H=900mm on cylinder 1x agitator flange connection IEC250 3x spherical caps / height-adjustable feet with foot plates 1x vent valve DN50 stainless steel unpressurized on the top plate 1x DN50 DIN11851 spigot outlet in the center of the underbody 1x DN50 DIN11851 spigot on the top shelf with blind cap 1x DN65 DIN11851 spigot on the top shelf with blind cap 1x type plate

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high pressure cleaner. Hsdjhf Na Ijpfx Ag Defr This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 7,5 kW (50Hz) / 9 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE08 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE08-series L/min Hedpfjhf Nakex Ag Dsfr CE08-200 bar 15 7,5 hp water blaster unit 50Hz CE08-200 bar 15 7,5 hp water blaster unit 60Hz CE08-200 bar 15 7,5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7,5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.