Used Pellet Pres for sale (33,631)

Condition: used, operating hours: 48,000 h, Manufacturer: Alup Motor: 22 kW Gbsdpfour N Tbjx Afiju Output: 3.9 m3/min Loaded operating hours: 48,000 h

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table Gbodpei Db Erjfx Afieu - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Air dryer AGRE KOMPRESSOREN ADD 3000 (18) – 13 bar | 11.18 kW | 2012. I will sell an industrial air dryer AGRE KOMPRESSOREN ADD 3000 (18), manufactured in 2012. The device is an ideal solution for compressed air systems, ensuring effective moisture removal and improvement of air quality in pneumatic installations. Technical data: ✅ Model: ADD 3000 (18) ✅ Manufacturer: AGRE KOMPRESSOREN GmbH (Austria) ✅ Year of manufacture: 2012 ✅ Weight: 550 kg ✅ Power: 11.18 kW Godpfsv Dr I Asx Afisbu ✅ Voltage: 400 V / 50 Hz / 3 phases ✅ Working pressure: 13 bar ✅ Maximum pressure: 13 bar ✅ Maximum inlet temperature: 55°C ✅ Maximum ambient temperature: 45°C ✅ Refrigerant: R404A (10.5 kg) ✅ Country of manufacture: Italy Condition and use: The dryer is in good technical condition, ready to work.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 2,900 kg, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, Eccentric press PRESSIX 40T Model 40CNV4 Serial No 40/2/88/03 MAchine weight _ 2900 kg Inverter for speed change. Variable speed 60/180 rpm High number of strokes per minute Slider with 4 bronze guides Automatic and centralized lubrication Hydraulic release Pneumatic clutch-brake group Adjustable stroke length using a toothed ring Balancing cylinders Slider adjustment mm 70 Gbedpfx Afjxlpursisu Closing height mm 240 Table surface mm 480 x 650x53 Table opening mm 120 Slider surface mm 300 x 370 Hole in the slider mm 50 Power kW 4 User manual and electrical installation in English. Machine in excellent condition. Used for small batches of automatic production. Total: 6,500,000 strokes Programs: tool adjustment, semi-automatic work, auto, automatic work, two-handed work, work with a pedal, turning the mortar in the opposite direction Dismantling and loading are charged additionally

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm Gbodpfstxkprex Afiju -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. Gjdpfx Ajwm Nq Eefisbu • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: good (used), Manufacturer: HSM Tip: HL 4010 Re Gbodpfour N Huex Afiou Basket tilt arm missing,

Year of construction: 2011, condition: used, Toxi Press TOX-Clinch-unit TZ including EPMR-drive & electrical cabinet very good condition Robot tool Typ:  TZ 05.422289 weight: 121kg Max Kraft 52kN complete system Typ: STE 606-006-125 3,4kW 125 mm/s power 400V Press Typ: EPMR 055.034.100.000 including Schematic diagramm You get everything as shown. Including electrical cabinet. Attention: the cables to connect the clinch unit and the electrical cabinet are not included Gbedpedq E Eiefx Afieu

Condition: ready for operation (used), plate length: 3000 mm plate width: 1300 mm water heating 6 hydraulic pistons pistons diameter: 45 mm overall dimensions: Gedpew Aff Refx Afiebu length: 3390 mm width: 1540 mm height: 1784 mm

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Gedpfx Afexgbxfoiebu Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Year of construction: 2010, condition: used, overall weight: 21 kg, machine/vehicle number: 013350501, Tecalemit high-pressure grease gun, mobile - DrumMobil 60-G55 S - for containers up to 55 kg - Grease pressure: max. 400 bar - Grease gun (automatic grease gun) - fully functional - dimensions (WxHxD) mm: 520x1028x485 - weight: approx. 21 kg manufacturer: Tecalemit manufacturer no.: 013350501 Gbodov Inquspfx Afieu

Condition: like new (used), pressing force: 70 t, – Capacity 1600 x 70 tons – NC control (touchscreen) – 2 hydraulic cylinders – Foot control – Photoelectric safety guard – Emergency stop – Relief – Documentation – 400V Gedpfx Asr Rtb Ujfisbu

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 The equipment is incomplete and is sold as a part Fault: Godpfx Afjur Ravoisbu Hydraulic pump missing Control is missing Power supply unit missing

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2024, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. Gbedpsu Th D Refx Afieu The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Gedpoxfh H Hofx Afiobu Materials: paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: like new (used), Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: C1-140_10, CrimpOne C1-140 Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/2 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 3 kW Power supply: 380 V Crimps per hour: 850 pcs Length: 600 mm Gbodpfsxd U Nlex Afiju Width: 435 mm Height: 630 mm Weight: 135 kg Noise level: 71 dB(A) Available immediately from stock!

Year of construction: 2021, condition: excellent (used), We offer a countertop autoclave in very good condition. Gbjdpjumth Sofx Afiou Autoclave Prestige Medical 12L, sterilization temp 121 stC Year of production: 2021 Brand: PrestigeMedical Model: Classic Extended Media Personal collection from Gadansk (Poland, Poland)

Condition: used, The press is extremely stable thanks to its heavy steel construction, which is fully welded. Gbsdpfx Aeugtv Iefiou The working surface of the press can be easily raised and lowered to any position by means of a hydraulic actuator. Additional tools are available and your own tools can be adapted. Specification: Tonnage: 250 T Year: 1991 If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 1995, functionality: fully functional, Corner joining machine PRESSTA 1800, operational. Godpfxsxgq D Ro Afijbu

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: limited functionality, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), empty load weight: 4,000 kg, volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Gsdpfju Thh Eox Afijbu Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ins3.641tructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, pressing force 50 t, with lifting and tipping device Technical data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: triple, wire, manual Throughput (bulk density): 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or on our YouTube channel. Inspections, including under power, are possible at any time by appointment. We also offer test runs with your material for a handling fee upon request. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We do not accept liability for any information given or for possible errors. This offer is subject to confirmation, prior sale, and may be revoked at any time. Inspections are possible by appointment. Gbsdpjxfh Htofx Afiju The sale is ex works against prepayment, without warranty or guarantee.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T50 CNR4 Year of manufacture: 1999 Nominal force: 500 kN Weight: 3,500 kg Strokes per minute: 90 Max. insertions per minute: 41 Operating air pressure min./max.: 4–5.5 BAR Stopping time: 0.117 s Safety distance: 187 mm Energy: 2000 KJ Adjustable stroke min./max.: 8–100 mm Ram adjustment: 70 mm High setting B.D.C.: 280 mm Max. extraction stroke: 30 mm Table surface: 770x530x58 mm Ram table dimensions: 450x300 mm Table to ram distance: 275 mm Shank diameter: 45 mm Throat depth: 270 mm Max. die dimensions: 450x300 mm Upper die weight: 84 kg Voltage: 400 V Hydraulic overload protection Supplied with user manual and CE compliance Six (6) month warranty excluding electronic parts NEW COMPONENTS INSTALLED: • Swivel joint bearings • Flywheel bearings • Air regulator • Clutch • Electrical panel • Complete safety guards • Foot pedal Gedpfx Afsxgqrhjisbu • Hydraulic overload pump pressure gauge

Condition: good (used), Year of construction: 1990, pressing force: 1,200 t, table width: 1,600 mm, table length: 4,000 mm, Pressure: 1200 t Stroke height: 800 mm Gedpfxoxgg Sdj Afiobu Table size: 1600 x 4000 mm

Condition: good (used), Year of construction: 2015, operating hours: 19,173 h, functionality: fully functional, pressing force: 150 t, filling opening width: 1,100 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 35,800 kg, oil tank capacity: 4,300 l, Technical data baler: Manufacturer Europress Umwelttechnik GmbH, Germany Gedpfxju Thfds Afisbu Type EP5 150 V5 Year of construction 2015 Operating hours 19,173 hours Number of pressed bales 282,961 bales Number of press strokes from the press ram 1,895,112 press strokes Pressing force of main press 150 t Specific pressing force 181.8 N/cm² Dimensions of feed chute 1,000 x 2,000 mm (w x l) Bale dimensions 750 x 1,100 mm (h x w), length variable Drive power 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current 230 A Cable cross-section supply 120 mm² Tying 5-fold vertical, fully automatic Hydraulic oil tank capacity 4,300 l PLC control Siemens S7 / ET200S Transport weight press 35,800 kg Special equipment: Base plates and side walls made of HARDOX steel Free tamper in front of the counter blade, with cleaning cycle Scope of delivery: 1 piece baler 1 piece control cabinet 1 set of oil collecting pans under the baler 1 piece maintenance platform on the baling channel 1 piece Feed hopper 1 piece Drop chute 10 pieces wire reel stands 2 pieces wire drawing stations with deflection rollers 1 set of machine documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation) Remarks: The machine is still completely assembled and available at short notice. Dismantling and loading is the responsibility of the buyer. The documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation declaration) is available in German. An inspection is possible by arrangement. We do not assume any liability for the technical data and possible errors.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Gbodpfx Afeu Tha Ioieu Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.