Used Patel Automation for sale (12,585)

Condition: new, Year of construction: 2024, Sifise Compact Industrial Palletizer Our state-of-the-art #palletizers are designed to streamline your production line and improve your workflow. With precision #engineering and advanced #technology, they can handle a wide variety of #products and pallet configurations, reducing the #risk of human error and increasing #productivity. Key Features: ✅ Space-saving design, also perfect for smaller production areas ✅ High-speed palletizing capabilities, increasing output and productivity Rodpfx Adsma Ruxjajn ✅ Intelligent software for precise stacking and stability ✅ Easy-to-use interface, ensuring seamless integration into your existing systems ✅ Customizable options to meet your specific needs Say goodbye to the physical strain and repetitive motion injuries associated with manual palletizing, and say hello to a safer, more efficient way of working. Trust Sifise automation for all your palletizing needs.

Condition: good (used), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with tumbler(interlock). The doors are locked in automatic mode and can only be opened in automatic mode or in manual mode after pressing the Doors button on the control panel. Automatic mode cannot be started when the door is open. Function sequence The station is loaded with the pre-assembled module via the transfer conveyor. The operating steps of the automatic station with the passage of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning of the WT with the preassembled assembly in St.2.1 - Lowering of the beam with the scanners and the vision sensor - Scanning of the 3 codes (front panel, front LP, SD LP), comparison with the database - Checking the correct latching of the FFC in the connector - Lifting the carrier and lowering the WT onto the belt Rjdpfx Adeibichoaen - Positioning of the WT with the pre-assembled assembly in St.2.2 - Positioning of the screwdriver and screwing of the front LP - Lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in pc.2.3 - Lowering of the light protection cover and contacting, positioning of the carrier with the test sensors from below - type-dependent testing of the SD + CD lighting slots and pushbuttons - Function test CD eject button - Lowering the WT onto the conveyor > continue If faults occur during the test, they are indicated on the display and can be rectified if possible. To do this, switch to manual mode and open the doors. After the repair and starting of the automatic system, the WT is tested again in the station. If no repair is possible (e.g. screw fault), the WT is marked as NOK in the control system and is not processed further. Manual NOK marking and ejection is also possible.

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Robust container rotating device from Key Plant Automation (made in Great Britain) with a total load capacity of 3,000 kg. Continuously variable rotation speed. Suitable for component diameters from 100 to 1,400 mm. Included in delivery: Double foot pedal for right/left rotation with start/stop functionality. Machine is also available for rental. See data sheet for further information. Rsdpfx Adswaidreajn We would be happy to deliver the machine to you at a cost.

Year of construction: 2001, condition: ready for operation (used), Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods. Rjdpfx Ajtqtw Usdasn

Year of construction: 1996, condition: ready for operation (used), X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Rodpow U Dwbefx Adaon

Year of construction: 2023, condition: new, Here we offer a machine that was specially developed for fixing loose or cracked branches. Rsdpfepiufwox Adajn The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible • Visual enhancement • Easiest operation DIAGNOSIS AND CORRECTION • Rotten branches • torn branches • Resin galls • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process The system can be viewed and tested by arrangement in 77866 Rheinau.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total width: 2,600 mm, Winding/Unwinding Station with Motor Drive Unwinding width: max. 2600mm Unwinding/rewinding via sensor (dancer control) Winding diameter/roll diameter: max. 1200mm Rsdpfswy H Dvox Adaon Double-sided folding bearings With clamping shaft for 3"/76mm diameter Winding direction switchable left/right Winding speed adjustable via rotary knob Robust welded frame, powder-coated, winder on castors Regulated drive of the clamping shaft via geared motor and frequency inverter Fully functional. Can be inspected if required.

Condition: used, Year of construction: 1996, Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Rodpfxjk Abn Sj Adajn Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2020, operating hours: 1,800 h, condition: good (used), functionality: fully functional, machine/vehicle number: 50850283/P.0000893.03.05, The assembly line is a production system consisting of three separate units, interconnected by conveyor belts. In the first section, consumable materials are fed in via rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished mask blanks are transported via an indexing conveyor and additional transport belts to the next units, which are arranged in parallel. Each of these stations feeds and welds the ear loops to the mask body. The line is suitable for the manufacture of surgical and general medical face masks, made from single- or three-layer PP (polypropylene) nonwoven fabric. System configuration Each production cell is based on an aluminum profile frame with swing doors made from Makrolon. For the required process stability, the stations are mounted on a solid aluminum table plate. The control cabinets are integrated into the frame. The equipment includes, among others, 3 ultrasonic welding units, Siemens PLC control, and various pneumatic systems from Festo. Performance requirements Output (gross): ≥ 80 units/minute Technical availability: ≥ 90% (VDI 3423) Required floor space for the complete system: approx. 6,000 x 5,000 mm Connection values Electrical connection: Operating voltage: 3P/N/PE 400 V AC 50Hz Mains fluctuation: ± 5% Short-circuit design: < 10kA Network type: TN-S Pneumatic connection: Compressed air: 6 bar ± 1 bar Ambient conditions Temperature range: 10°–35°C Max. humidity: 75% (non-condensing) Emissions Sound pressure level during operation: ≤ 78 dB(A) according to EN ISO 11204:2010 Redpfxsw Dn Uwo Adasn The machine is currently out of use and was regularly serviced during its operational period. At present, the machine is dismantled, with individual components stored under dust protection. Upon request, we can also sell our remaining raw material stocks for production.

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 3,000 kg, faceplate diameter: 1,020 mm, welding current (max.): 600 A, swivel angle A-axis (max.): 135 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Load capacity: 3,000 kg Center of gravity distance / Eccentricity: 150 mm / 150 mm Maximum tilt angle: 135° Rsdswbqmdspfx Adajn Tilt speed: 60 s Rotation speed: 0.033 – 0.66 rpm Dimensions of faceplate Height of top edge of faceplate (horizontal): 797 – 1,820 mm Height of faceplate rotation axis (vertical): 850 – 1,650 mm Diameter of faceplate: 1,020 mm Grooves on faceplate: 4 × 18 mm Operation Handheld remote control: Robust industrial handheld remote control with all operating functions MACHINE DETAILS Weight: 1,800 kg Installation dimensions: 2,100 × 1,300 × 1,050 mm Electrical Specifications Max. welding current: 600 A Input voltage: 380 – 400 V / 3 Ph / 50 – 60 Hz Dimensions as per sketch Total height (maximum): ~2072 mm Maximum height of the center of the axis: ~1472 mm Minimum height of the center of the axis: 650 mm Distance from floor to table top edge: 797 mm Distance from table top edge to center of the axis: 147 mm Rear foot height: 100 mm Outer diameter of rotary table: Ø1200 mm Pitch circle diameter (PCD): Ø489 mm Number of mounting holes: 4 x M16 thread Angle segments on rotary table: 120°, 45° EQUIPMENT - Industrial handheld remote control

Condition: used, Stöger Automation PESCE S&S bowl feeder 230V Rjdpfx Aswcar Sjdajn

Condition: good (used), The following components from B&R Automation are for sale: - Power Panel 120 - CPU CP476 Redpfort T Awox Adaen Both were removed in 08/2022 and have worked without any problems to date.

Year of construction: 1999, condition: ready for operation (used), X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Redpfx Asw U Dwhodaon

Year of construction: 2018, condition: ready for operation (used), Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the "Fiber Placement" process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site inspection is possible. Redpfjriurfox Adaen

Condition: used, Year of construction: 1999, For the production of writing pads with cover sheet Width: min. 105 mm, max. 330 mm Length: min. 148 mm, max. 355 mm Block thickness: min. 3 mm Block thickness: max. 15 mm Manufacturing process: The unglued blocks cut to size are manually laid onto the feed station in by hand. The further process follows automatically. Rodpfx Aoyf I Sksdaon The blocks are aligned and pushed into a magazine drum. These are then glued to the head side with hot glue and dried. Subsequently, the blocks are fed further and the envelope is grooved, supplied, glued and struck around the block. Finally, the finished blocks are laid out on a table.

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: SIEMENS, controller model: 840, overall weight: 11,500 kg, number of axes: 5, This 5-axis Gleason PFAUTER G320 CNC + Promot Automation was manufactured in 2001. It features a Siemens 840 control unit, a maximum workpiece diameter of 380 mm, and a module range of 0.5-7.0. The system includes Promot Automation handling, a robotics system, and a cooling belt system. If you are looking to get high-quality gear grinding capabilities consider the Gleason PFAUTER G320 CNC machine we have for sale. Contact us for more information about this machine. • Operator panel: included • Module range: 0.5–7.0 • Workpiece diameter: min 10 mm, max 380 mm • Number of teeth: 10–600 • Axis travels: Z (vertical) 200 mm; X (horizontal) 230 mm; Y (tangential/shift) 135 mm • Clamping head swivel (A): ±45° • Tailstock stroke: 125 mm • Dressing travels: V (tangential) 180 mm; U (radial) 110 mm • Grinding wheel speed: up to 3000 rpm, stepless • Linear axis speed: 10,000 mm/min • Max. table rotation speed: 240 rpm • Table resolution: 0.001° • Feeds: machining and working feeds stepless • Grinding wheel dimensions: diameter 270–350 mm; width up to 104 mm; bore 160 mm • System weight: approx. 11,500 kg • Space required (machine): approx. 3.7 m × 2.4 m × 2.75 m Additional equipment • Promot Automation handling unit (robotics handling) • Operator panel/handheld (for automation) • Conveyor belt Rsdpfx Adsyf E R Deasn • Cooling belt system • Hydraulic unit • Space required (automation): approx. 4.5 m × 1.6 m × 4.0 m • Accessories as shown in photos

Condition: ready for operation (used), Year of construction: 2018, operating hours: 3,731 h, functionality: fully functional, machine/vehicle number: DS901DA010011, clamping force: 2,750 kN, screw diameter: 50 mm, injection pressure: 1,530 bar, opening stroke: 610 mm, controller model: ENDURA touch, TECHNICAL DETAILS Clamping force: 2,750 kN Tie bar spacing: 1,560 mm Column spacing: 660 x 660 mm Opening stroke: 610 mm Screw diameter: 50 mm Injection pressure: 1,530 bar Max. injection flow: 523–1,530 cm³/s MACHINE DETAILS Control system: ENDURA touch Cabin protection: Fully enclosed cabin Column arrangement: horizontal Oil tank: 900 l Operating voltage: 400 V / 50 Hz Power consumption: 219 A Dimensions (L x W x H): 9,000 x 4,200 x 2,900 mm Operating hours: 3,731 h Redpfxeyf Hfpe Adajn EQUIPMENT Koch dosing system AUTOMATION EQUIPMENT Fully enclosed cabin with safety door KUKA 6-axis robot KR 20 R 1810 with gripper adapter Gimatec QC 90-A KUKA 6-axis robot KR 6 R900 with gripper adapter QC 50-A Handheld control unit Marking laser with scanner and extraction unit Multi-level conveyor system with lifting unit Base frame and transfer station Base frame with screw feed unit 4-cavity removal gripper 6827137 1+1 handling gripper 6827137 4-cavity removal gripper 7936450 4-cavity removal gripper 7936449 2+2 handling gripper 7936449 Note: The machine was in operation until 2022 and was then professionally dismantled. Since then, it has not been used again.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 10089060/30042621, total length: 5,300 mm, total width: 2,100 mm, total height: 2,300 mm, year of last overhaul: 2024, The machine was last overhauled in 2024! TECHNICAL DETAILS Rodjyfv Exopfx Adajn Material loading area: 4,000 mm x 2,000 mm MACHINE DETAILS Dimensions (L x W x H): 5,300 x 2,100 x 2,300 mm EQUIPMENT Service and inspection history available from 2019

Condition: used, Year of construction: 2022, operating hours: 12,787 h, machine/vehicle number: M210019, comprising: FP 600 Duo complete, complete laser station, SIC MARKING, type XXL-BOX 1200, year of manufacture 2021, washing machine, filter system for the washing machine, oil separator, ultrasonic cleaning, 1 robot of type IRB 4600, version IRB 4600-40/2.55, IRC5 Single Rsdpfx Aoycivfjdasn

Condition: excellent (used), Year of construction: 2010, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles Rodpfxsx E Aple Adasn • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. With 56 shelves, this results in a total storage area of ​​197.68 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 28,000 kg for all 56 shelves. Manufacturer: Modula Year of manufacture: 2010 Model: Modula Lift ML 50D Height: 6900 mm Carrier width: 4100 mm Carrier depth: 857 mm Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 70000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 carriers/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 56 Product video Product video 2 Datasheet: see Documents tab More items - new And used items – find them in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2013, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. With 58 shelves, this results in a total storage area of ​​204.74 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 29,000 kg for all 58 shelves. Manufacturer: Modula Year of manufacture: 2013 Model: Modula Lift ML 50D Height: 7350 mm Carrier width: 4100 mm Carrier depth: 857 mm Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 70000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 carriers/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 58 Product video Product video 2 Datasheet: see Documents tab Rodpjx Ezxlofx Adaen Item location: 18069 Rostock Disassembly and removal by buyer Disassembly by our assembly team is also possible (€5,000 net) More items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2021, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. Redox Ey Avopfx Adajn With 60 shelves, this results in a total storage area of ​​211.80 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 30,000 kg for all 60 shelves. Manufacturer: Modula Year of manufacture: 2021 Model: Modula Lift ML 50D Height: 6700 mm Carrier width: 4100 mm Carrier depth: 857 mm Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 80000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 carriers/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 60 Product video Product video 2 Datasheet: see Documents tab More items - new And used items – find them in our shop! International shipping costs on request!

Year of construction: 2020, condition: used, Manufacturer: Rocla Oy (Logisnext Group, Finland) Type: Automated Guided Vehicle (AGV) – counterbalanced model with bale clamp (AWTsc) Industrial Applications: Automated handling of bales, rolls, pallets or cylindrical loads in paper mills, packaging plants, logistics hubs, and automated warehouses. Designed for 24/7 operation in narrow aisle and high-density racking systems. Main Technical Specifications: - Model: AGV AWTsc – 40TF8300E - Year: 2020 - Nominal capacity: - 3200 kg at 760 mm load center - 6400 mm lift height - Battery type: 420 Ah Rjdow Ec Eaopfx Adasn - Unladen weight: 4520 kg - Power supply: 24 V DC - Rated power consumption: 6.8 kW - Drive control: fully automated - Turning radius: compact for narrow aisles - Safety equipment: - 360° laser scanners - Obstacle detection sensors - Intelligent automatic braking - Control interface: centralized software-managed fleet system - Autonomy: ~8–16 hours (depending on battery configuration) Machine Usage The Rocla AWTsc is a heavy-duty AGV designed to handle bales or rolls without pallets using its integrated clamp. Its counterbalanced design enables rack access without side supports. It is ideal for environments requiring precise, repetitive handling of cylindrical loads and provides fully automated operation with zero human intervention. Features / Differentiators - Bale clamp attachment for direct roll/bale handling - Full autonomy with intelligent fleet control - High load and lift capacity (up to 3200 kg at 6.4 m) - Advanced safety package included as standard - Suitable for high-density and narrow aisle operations - Integrates easily with warehouse management systems (WMS)

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: HEIDENHAIN, controller model: TNC 430, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis HERMLE C 600-U + EROWA Robot easy automation was manufactured in 2001. It features a 24-position magazine, extended X-axis of 2010 mm, C-axis rotary table, spindle speed up to 15,000 rpm, and a 30 tool capacity. Includes a chip conveyor and a 200-liter coolant tank. If you are looking to get high-quality automation capabilities consider the HERMLE C 600-U machine we have for sale. Contact us for more information about this machine. • Electronic thermal expansion compensation • Ethernet interface • Tool positions: 30 • Mts single 24-position magazine plate • Heidenhain sk 40 infrared probe • Breakage monitoring • C-axis: rotary table with worm gear • Rotary table top Ø: 280 to 450 mm • Extended x-axis: 2010 mmApplication: Prototype construction. EROWA Robot easy automation is from 2011The automation system was manufactured in 2011 and has only been in use for a few hours! Hours of automation: No exact information is available as there is no hour meter in the automation system. Additional equipment • Oil mist extraction • Electronic handwheel • Chip flushing gun • Machine bed flushing • NC swivel table • Blow-off device • Closed roof Rsdpfxox D Iywj Adaon • 200-liter coolant tank • Includes 24 pallets and MTS-Chuck S-P/A clamping additional clamping devices, tools, etc. spindle was replaced last ensive maintenance work was also carried out as part of the last WA Robot easy automation retrofitted in Single magazine plate with 24 slots.

Condition: excellent (used), Year of construction: 1995, FULLY AUTOMATIC INLINE MACHINE FOR FOLDING BOXES BOBST MIDLINE 924 Speed: up to 18000 boxes per hour Nominal machine width: 2400 mm Nominal plate cylinder circumference: 1000 mm Largest printing area: 920 x 2400 mm Rsdpfxsxrfraj Adaon Maximum corrugated board thickness: 10 mm Standard slitting blade thickness: 6.35 mm Average connected load: 200 kVA The line consists of: 1) Feeder Serco 2) Main machine – Flexographic printing machine midline 924 Colors: 3 // Automatic washing device 3) Slotter (Riller) Longitudinal slots // Tool is installed in the machine. 4) Punching module (e.g. for punching handles) 5) Breakout vibrating station (Material – punching residues are disposed of using compressed air) 6) Glue station Robotech 7) Folding unit 8) Counting station & display The specified number of cartons will be bundled - up to here main unit - 9) Package binder / bundling machine CEMA Fully automatic strapping machine with weld seal and press for 5 mm plastic strapping, for binding corrugated cardboard bundles in the direction of travel of the flute 10) Palletizing system Martin Automatic layer formation. Roller tables receive the packages from the bundling machine. The packages are positioned using the ball bearing table according to their arrangement in the preselected position. If necessary, the package can be rotated 90° or 180° simultaneously with the lateral movement.