Used Paper Press for sale (13,897)

Condition: used, Length each: 2045 mm (1 tool with light rust scars, 1 tool with heavier rust scars) Lsdpfx Ahocbnwcjvjhd

Year of construction: 1992, condition: used, machine/vehicle number: 80076, pression: 400 t working width: 4100 mm clear support width: 3150 mm support throat: 330 mm electrical connection: 400 V, 37 kW Ljdpfsbfk Anox Ahvehd weight: ca. 25 t space needed: 4100 x 2300 x 3910/530 mm

Year of construction: 1972, condition: used, Working length up to: 3900 mm Lsdpfxobnnyij Ahvjhd hydraulic drive: 220/380 V, 1400 rpm, 0,75 kW Space requirement: 600 x 4650 x 1000 mm Weight: approx. 250 kg in mobile version

Year of construction: 1991, condition: used, machine/vehicle number: K2940, pression: 150 t working width: 4300 mm clear support width: 3600 mm Lsdpfx Aho Dnf Uovohd support throat: 300 mm max. assembly height: ca. 500/700 mm working speed: auf-/abwaerts 41 - 65/10 mm/sec rear stop: 1000 mm electrical connection: 400 V, ca. 15 kVA kW weight: 14 t space needed: 4600 x 1950 x 3100 mm

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW Ljdpfx Aho Dqaqovohd weight: 20 t space needed: 2100 x 3800 x 3100 mm

Year of construction: 1993, condition: used, machine/vehicle number: P 285, pression: 800 kN table size: 600 x 900 mm space needed: 1150 x 1900 x 2700 mm weight: 6000 kg Lhsdj N D Anopfx Ahvsd

Year of construction: 1978, condition: used, machine/vehicle number: 455 178, pression: 45 t throat: 230 mm table size: 460 x 690 mm clearance hole in the die: 175 x 220 mm table adjustment: 160 mm tappet area: 185 x 360 mm tappet adjustment: 55 mm stroke adjustment: 4 - 80 mm number of strokes: 120 /min engine: 380 V, 3 kW space needed: 1800 x 1100 x 2100 mm weight: 2800 kg Lhsdpfsdd Irgox Ahvsd

Condition: used, machine/vehicle number: 478, pression: 36 t Lodpobb Tguefx Ahvohd max. mounting height: 135 mm electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm weight: 1800 kg

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Ledpfsvgcpcjx Ahvjhd Thrust: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Hydraulic drive: 380 V, 15 kW Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg

Year of construction: 1976, condition: good (used), machine/vehicle number: H 76-467, Pressing force: 160 kN Ram stroke: 100 mm Installation height: 350 mm Hole in the table: 100 mm Ram bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Lsdpeflrhzefx Ahvjhd Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx .: 1,2 t

Condition: ready for operation (used), Year of construction: 1970, machine/vehicle number: 5058870, Pressure force: 25 tons Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Number of strokes: 150 / min Drive Motor: 380V 1.1KW Lsdpem Uxzuofx Ahvjhd Required space: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Condition: ready for operation (used), Year of construction: 1991, Press force: 60 t Max. working width: 2550 mm Clear distance between uprights: 2550 mm Lhedoyda Uzspfx Ahvsd For sheets (at full working width) up to: Throat depth: 250 mm Bending speed: 75 mm/s Return speed: 95 mm/s Backgauge adjustment: 500 mm Hydraulic drive: 380 V, 4 kW Space required: 2920 x 1350 x 2250 mm Weight: 4.7 t Control: CYBELEC

Year of construction: 1999, condition: used, Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg Lhedewnhicjpfx Ahvod - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, total height: 2,700 mm, pressing force: 25 t, table width: 500 mm, table length: 500 mm, overall weight: 2,000 kg, distance table to ram: 800 mm, stroke length: 500 mm, Equipment: documentation/manual, Available for sale: 1 used hydraulic press Manufacturer: VEB Werkzeugfabrik Zeulenroda WMW Model: PYE25/1 Total weight: 2 t Nominal pressing force: 25 MP Ram stroke: 500 mm Maximum distance between table and ram: 800 mm Table: 500 x 500 mm Lhsdpfoxfzdlox Ahved Documentation included

Condition: ready for operation (used), Year of construction: 2007, - User-friendly operation - Graphic display with separate LED indicators - Microprocessor control of all functions The following suction plates are included in the scope of delivery: Type 62, for paper weights of 60-90g/m² Type 85, for paper weights from 110g/m² Type 107, for paper weights of 80-110g/m² (currently installed in the machine) Optional suction plates of type 60 and 201 are available at an extra charge. Counting speed: from 500 to 2,000 sheets per minute Maximum total counter reading: 999,999 Material range: 25-240g/m² depending on paper quality and type Batching/insertion options: from 2 to 9,999 Maximum sheet size: A3 Minimum sheet size: 60 x 110 mm Maximum stack height: 230 mm Machine dimensions (HxWxL): 752 x 600 x 982 mm Lhodsywfclspfx Ahvod Net weight: 114 kg Electrical connection data: 230V 50/60 Hz; 115V 50/60 Hz Technical specifications according to the manufacturer (subject to change) Note: The following maintenance tasks were performed during the last service: - Complete cleaning of the vacuum system - Bearing of the separating finger replaced - Counting timing readjusted - Table flap renewed

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Lhedpfxoywdtvs Ahvsd Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: good (used), Polar Mohr 78 ES Paper Guillotine Machine in very good condition, serviced and ready to use. Made in Germany. Technical specifications: Cutting width: 780mm Stack height: 120mm LCD display Power supply: 400V Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Lsdsywdq Iopfx Ahvohd Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift Lsdpfoywdp Rjx Ahvohd This device is in excellent technical and visual condition. This is the current production model. Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800

Condition: good (used), Ideal 4850 Guillotine Machine in very good condition, manufactured in Germany. This is the newest model, currently in production. Technical specifications: Working width: 475mm Stack height: 80mm Minimum remnant: 35mm Maximum distance from the knife to the saddle: 450mm 230V power supply Key features: The machine has an electronic dimension display Electromechanical knife and pressure drive Automatic pressure synchronized with the knife’s cutting movement Front and rear table guards Side tables Electronically controlled two-handed cutting start Automatic knife return from any position Optical laser cutting indicator Lhjdpeywdpwsfx Ahvsd Additional equipment includes: spare knife, cutting stick, knife changing tools including a safety handle, tapping block, and documentation.

Condition: good (used), Baumann BSB 3L Paper Jogger This machine is 100% functional and in very good condition. This is the latest design from a German manufacturer. Technical Specifications: Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Lhedpsywdn Hjfx Ahved Power supply: 400V Air squeezing roller Air table Tilt angle adjustment Automatic flap opening Jogging frequency adjustment (inverter) Adjustable squeezing roller force and speed. Chrome-plated table surface

Condition: good (used), Ideal 5221-05 EP Digicut Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment options. Technical data: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance between the saddle and the knife: 520mm 230V power supply Key features: The machine has a full EP programmer with the function of saving individual steps to the device’s memory Hydraulic pressure beam drive, fully adjustable pressure force from 200-1100N Electromechanical knife and saddle drive Automatic pressure synchronized with the knife’s cutting movement Electronically controlled saddle adjustment knob with adjustable speed Foot pedal for the pressure „SCS” safety system, which includes: Electronically controlled two-handed cutting start Lsdpoywdnmjfx Ahvshd Automatic knife return from any position Transparent covers on the front and rear tables Cutting indicator Additional equipment includes: spare knife cutting stick, tool set, paper stack tapping device, pressure plate and documentation.

Condition: good (used), Ideal 4850-95 Paper Cutting Guillotine Machine in very good condition, ready for production. Ljdpfx Aoywdm Njhvohd Technical specifications: Working width: 475mm Stack height: 80mm Minimum scrap: 35mm Maximum distance from the knife to the saddle: 450mm 230V power supply Key features: Electromechanical drive for the knife, clamp, and clamp Automatic clamp synchronized with the knife’s cutting movement Transparent covers on the front and rear tables Electronically controlled, two-handed cutting start Automatic knife return from any position Optical cutting indicator Additional equipment includes: tools, cutting stick, and documentation.

Condition: good (used), Sperr & Lechner SL II A-100 Hydraulic Bookbinding Press Ready for operation. The machine is like new. Lhsdpfeywdmvox Ahvsd The press has a built-in hydraulic unit. Piston rod area (main plate): 580x440mm Single piston rod area: 440x280mm. Irreplaceable in bookbinding for the production of books, pads, etc. Weight: 600kg. 380V power supply. Made in Germany.

Condition: good (used), Perfecta BSH5-1200 Paper Stack Lifter The device is in perfect condition. Lhedpfx Aeywdmishved Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 1200 kg. Pallet/sheet dimensions: 990 x 1350 mm. Documentation included.

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m Lodpfx Aox Sr Evjhvohd weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.