Used Panel Rip Saw for sale (16,352)

Condition: used, Year of construction: 1996, sawing length: 5300mm sawing height: 2100mm cutting depth: 60mm scoring unit: no feed: manuell read out horizontal cut: Scala read out vertical cut: Scala sawblade diameter: 300mm evasive workpiece support: ja speed sawblade: ca. 4000 U/min motor power: 3 kW machine length: 6500mm Djdjuix Eyepfx Adpeup machine width: 1500mm machine height: 3000 mm weight: 800kg

Condition: new, Year of construction: 2025, Cutting length: 4100mm Cutting height: 2200mm Cutting depth: 60mm Scorer: yes Feed: manual Display horizontal cut: digital Display vertical cut: digital Saw blade diameter: 300mm Evasive material support: yes Saw blade speed: approx. 4000 rpm Engine power: 4 kW Machine length: 5300mm Machine depth: 1800mm Duodpfx Ajhpma Nsdpsp Machine height: 3100mm Weight: 800kg

Condition: used, Year of construction: 1999, cutting length: 5300mm cutting height: 2100mm cutting depht: 80mm scoring unit: no feed: manuell read out horicontal cut: Scala read out vertical cut: Scala sawblade diameter: 300mm movable material support: ja Sawblade speed: ca. 4000 U/min motor power: 4 kW machine length: 6500mm Dusdpfxsv R U I Se Adpop machine depth: 1500mm machine height: 2800 mm weight: 800kg

Condition: excellent (used), Panel Saw ELCON ADVANCE 215 DSX-A - used - Automatic clamp system for trimming the lower edge, Pneumatically retractable support grid, Dsdoyq Rwyspfx Adpeup Sturdy locking positions for the saw carriage at the top and bottom, Electrically monitored locking for vertical cuts, Retractable riving knife for cut-outs, Control panel positioned at eye level, Digital display at the longitudinal stop, Digital display for horizontal cuts, Scoring saw unit with counter-rotation, TRK extraction system, Certified dust extraction, Strip cutting device ----- Technical Data ----- Cutting length: 6,300 mm, Cutting height: 2,100 mm, Edging height: 2,000 mm, Cutting depth: 80 mm, Saw blade Ø: 300 mm, Motor: 4 kW, Extraction port Ø: 200 mm, Compressed air: 6-8 bar, Required space (LxWxH): 7,700x2,000x3,000 mm Quality Information: - Guide rails renewed - Complete basic inspection - Thorough cleaning - Electrical system checked - Immediately ready for operation

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 241.371, functionality: fully functional, operating hours: 4,700 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 46 A, input frequency: 50 Hz, cutting height (max.): 80 mm, cutting width (max.): 5,800 mm, saw blade diameter: 350 mm, saw blade bore: 30 mm, total length: 7,300 mm, total width: 7,600 mm, table height: 970 mm, year of last overhaul: 2025, plate length: 7,300 mm, platform width: 5,800 mm, Equipment: CE marking, documentation/manual, scorer, Electrical connected load: approx. 25 kW Voltage and frequency: 400 V / 50 Hz Mains system: TN with earthed neutral point Operating pressure: 6 bar overpressure Compressed air volume at operating pressure: approx. 143 l/min Compressed air volume at standard pressure (1 bar): approx. 1000 l/min Extraction connection - pressure beam - longitudinal saw: 2 x Ø 120 mm Duedpfx Adjytfxwspep Extraction connection - chip channel - longitudinal saw: 1 x Ø 100 mm Extraction connection - angle stop - longitudinal saw: 1 x Ø 80 mm Required extraction velocity: 25 m/s Extraction capacity: 3190 m³/h Required negative pressure at extraction ports: 2500 Pascal Nominal cutting length for saw machine 580: 5800 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Saw blade projection above table (U): max. 95 mm Maximum clamp opening (K): 90 mm Maximum stack height (P): (including total wave heights and all max. panel thickness tolerances) 80 mm Minimum panel thickness or stack height (P): (with use of a strip aligner) 6 mm Minimum alignment force of strip aligner: 400 N / unit Maximum alignment force of strip aligner: 2000 N / unit Working height, longitudinal saw: 970 mm Overall height: 2070 mm Main saw motor power: 15 kW Saw unit feed speed, forward: 5 to 120 m/min Saw unit feed speed, return: 120 m/min Return feed speed – longitudinal saw: up to 80 m/min

Condition: excellent (used), Sawblade tiltable 45 ° Length of the rolling table 3.200 mm cutting width 1.250 mm Duodjyq Ab Depfx Adpop Motor output 5,5 kW Saw blade diameter 350 mm Scoring unit 0,75 kW Altendorf F45 sliding table saw for precise rip, cross, and miter cuts in solid wood, panel materials, and coated materials. The machine enables accurate and repeatable cuts thanks to its smooth-running sliding table, motorized adjustment, scoring device, and sturdy cast iron construction. Ideal for carpentry, furniture making, and interior design.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, cutting height (max.): 110 mm, workpiece length (max.): 2,200 mm, workpiece width (max.): 4,300 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 4,300 mm Maximum panel length: 2,200 mm Dedpsyqydcjfx Adpeup Maximum cutting height: 110 mm Maximum feed rate: 100 m/min Main saw blade protrusion: 120 mm Number of grippers: 9 Saw Unit Motor power (saw unit): 18 kW Motor power (scoring unit): 2.2 kW Maximum feed speed: 150 m/min MACHINE DETAILS Control system: Windows XP Machine programming software: OSI FEATURES Quick saw blade change Second flexible pusher Panel rotation station Loading of thin sheets CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is, and as inspected”) on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination address. External reference: 8158

Condition: excellent (used), Panel Saw HOLZ-HER 1255 – used – Welded frame with extremely high rigidity, automatically retracting shifting grid, sturdy locking positions for saw carriage at top and bottom, electronic monitoring of vertical cut positions, fold-down plunge lever on saw unit, retractable riving knife for cut-outs, operator console at eye level, digital display for horizontal cuts, roller lifting transport system, Super-Cut scorer with carbide reversible blades, trimmable support table, TRK dust extraction system, dust-tested ----- Technical Specifications ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Trimming height: 2,100 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120 / 100 mm, Duedjyqwblspfx Adpep Overall dimensions (LxWxH): 5,400x1,700x3,100 mm, Weight: 900 kg Quality Info: - Support rails replaced - Saw shaft newly mounted - New belts - Complete general inspection - Complete general cleaning - Electrics checked - Immediately ready for operation

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Cutting length: 4,300 mm Program pusher travel: 4,400 mm Saw blade projection: 90 mm Main saw motor power: 11 kW Scoring saw motor power: 2.2 kW * Automatic main saw cutting height adjustment according to panel stack height * Controlled opening of the pressure beam * Quick-change system for main and scoring saw blades (QUICK CHANGE) * Grooving device with main saw - electronic adjustment * "DIGISET" - electronic adjustment of the scorer to the main saw from the operator panel * Side alignment unit integrated into the saw carriage Dusdpfx Ajypi Disdpsp * Cycle start button located next to the third air flotation table * Automatic measuring of workpieces for cutting sequences and manual cuts Equipment: ----- 4 air flotation tables with rounded front edges 9 grippers 11 roller supports in the program pusher area Electrical requirements: 400 V, 50 Hz, 3 phase Control: WINDOWS PC with OSI PLUS software * OS Labelling - label printing software * OPTIPLANNING optimization software for office workstation Additional accessories: * Label printer on the machine

Condition: good (used), Year of construction: 2000, functionality: fully functional, operating hours: 30,902 h, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 220 mm, cutting width (max.): 5,300 mm, saw blade diameter: 305 mm, saw blade bore: 30 mm, rotational speed (max.): 4,750 rpm, total length: 6,300 mm, Types: 6220A Standard III, machine no.: 30902. Motor: 4.4 kW, Power supply: 3/400V/50Hz, 4750 rpm. Cutting capacity: 5300x2200x80 mm. Year of manufacture: 2000. Dodpfx Adoyr R S Hjpjup

Condition: new, Year of construction: 2022, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 1,900 mm, cutting width (max.): 3,200 mm, saw blade diameter: 250 mm, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: mechanical, rotational speed (max.): 5,500 rpm, rotational speed (min.): 5,500 rpm, cutting depth: 50 mm, Equipment: CE marking, documentation/manual, saw blade guard, New vertical panel saw in perfect condition. Never used ! Duedpfx Adoyr Hkxspsp

Condition: excellent (used), Year of construction: 2007, Panel Divider Saw Manufacturer: HOLZMA Type: PROFI HPP 380/43/43 Year of Manufacture: 2007 Dimensions: approx. 13,000 x 6,540 x 2,100 mm Features: - Total power: 20.0 kW - Can be combined with an automatic material feeder - Maximum cutting length: 4,300 mm - Maximum program slide travel: approx. 10,000 mm - Sawblade projection: 95 mm - Sawblade diameter: 380 mm - Main saw power: 13.5 kW Dujdpfxsv N D E Re Adpjp - Automatic cutting height adjustment - Scoring unit or postforming unit - Scoring blade diameter: 180 mm - Scoring unit power: 2.2 kW - Saw carriage feed speed: 5 – 130 m/min - Saw carriage adjustment: Continuously adjustable - Program slide feed: 1-25 m/min - Angle clamping device - Number of collets: 7 - Collet opening width: 95 mm - Lifting device for raising the collets - Collet lifting height: 290 mm - Automatic labeling - Label printer - 90° turntable for max. 4,300 x 2,200 mm sheets - Schuler MDE software for user data acquisition and analysis - Pivoting control panel The machine is still in operation and can be inspected. Available from the beginning of August 2025. Location: Sauerland

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included Dedpfxex H S Tie Adpjup - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Duodpfoyf Nu Tjx Adpep

Condition: used, Storage location: Supplier Duedpfxeynttfs Adpep

Condition: used, Year of construction: 1985, used, good conditionmake Striebigtype 6220 Ayear of manufacture approx. 1985motor 4.4 kWcutting length approx. 5300 mmcutting height approx. 2100 / 2200 mmcenter supportcutting depth 80 cmsaw blade diameter approx. 303 mmwall mountingslatted frame moving awaysupport rails woodsuction connection D 120 mmspace requirement approx. 6300 mm x 1250 mm x 2720 mmWeight approx. 1200 kgTotal connected load approx. 4.4 kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover as seenwithout guarantee and warranty Dujdpfsvwfgxox Adpjp

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Used BIESSE Selco WN2 saw - OSI control - label printer - Year 2017 - available April Dusdeyrr U Njpfx Adpop - saw height 60 mm - 1–80 m/min - quick-change saw blade - 4 air cushion tables

Condition: excellent (used), functionality: fully functional, Striebig Standard 5220 Vertical Panel Saw Cutting length: 4300 mm Cutting height: 2200 mm Max cutting depth: 80 mm Max saw blade diameter: 300 mm Djdpfx Adeynlm Depoup Machine loading directly from the customer

Condition: ready for operation (used), Cutting area 5200 x 2100 mm Djdpfx Ajyrpk Iodpoup Cutting depth 70 mm Manual feed Automatic swing-out grate External dimensions (L x W x H) approx. 6550 x 1500 x 3010 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 3,200 mm, total length: 6,667 mm, total width: 5,916 mm, overall weight: 5,000 kg, Equipment: CE marking, scorer, We offer a horizontal panel dividing saw Selco EB90 Machine data Brand: Selco Model: EB90 Description: Horizontal panel saw Cutting length: 3,200 mm Maximum panel width: 3,200 mm Saw blade projection: 85 mm Clamping grippers: 6 Connection: 15kW, 3Ph, 50 Hz, 380V AC Weight approx.: 5,000 kg Year: 1999 3 rounded air cushion tables as support Dedpfx Asyrngzodpoup Software: Optiplanning Brochure can be provided upon request The machine is in impeccable condition (still in operation). Video can be provided upon request. Machine as seen, without dismantling and freight.

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Max. panel length: 4500 mm Dusdpfxoyngy So Adpop Main saw blade projection: 60 mm No of Grippers: 8

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts Djdpfsw Nac Aex Adpoup PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 Partnership Edition General features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam including LED lighting with 3 different status colors: WHITE: Machine in idle position RED: Pressure beam lowering or emergency stop function BLUE: Saw unit moving; variably positionable support table 1,000 x 500 mm - Scoring system using main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel including: saw blade holder, template holder, emergency stop button, start button, selector switch Scoring/grooving saw, rotary switch for feed speed, switches for laser (option) and USB socket Partnership Edition includes: - Motorized rip fence with 4 aluminum stops, synchronized positioning. All four stops adjustable up to 1,300 mm. The table is approx. 2,000 mm long. - Windows 10 screen control (10'' touchscreen). The graphical interface offers the following functions: tool database, miter cut calculation at the length stop, cutting plans can be created and saved, programs can be saved, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm including 2 digital displays Technical data: - Max. saw blade protrusion 350 mm blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (approx. 7.5 hp) - Feed speed: 0 – 40 m/min Dedpfx Adjyncpcepsup - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm Includes: - Motorized rip fence with 4 aluminum stops, adjustable up to 2,100 mm instead of 1,300 mm - Cutting line laser - Saw motor with 7.5 kW (10 hp) including automatic star-delta startup - Programmable saw blade height adjustment including height correction when tilting the saw unit - Mitre fence tiltable +/- 50° with length compensation Location: Flörsheim am Main Availability: by arrangement

Condition: used, Cutting length 5300 mm, cutting height 2200 mm, motor 5.5 kW, cutting depth 80 mm, free-standing. Storage location: supplier Dedpfx Adeynbm Hepjup

Condition: used, Year of construction: 2004, total length: 3,200 mm, total width: 950 mm, total height: 1,990 mm, Weight: 400 kg Dodpfsym U Eaex Adpsup Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 411224 - Max. cutting height vertical [mm]: 1350 - Max. cutting height horizontal [mm]: 1650 - Max. cutting width [mm]: 3200 - Max. cutting depth [mm]: 50 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 8 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 3200mm x 950mm x 1990mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels