Used Palette For Doosan for sale (310)

Condition: good (used), Year of construction: 2007, operating hours: 25,033 h, functionality: fully functional, machine/vehicle number: VMD4500023, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 20,000 rpm, spindle speed (min.): 1 rpm, mount diameter: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,750 mm, total width: 2,480 mm, total length: 3,300 mm, type of input current: AC, torque: 27 Nm, spindle motor power: 11,000 W, Equipment: documentation/manual, The production machine will be available from October 2025! We are pleased to assist you with technical inquiries by phone. Djdpfow Sr Nmex Ab Tswf

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 125 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, power: 47 kW (63.90 HP), empty load weight: 4,850 kg, drive type: Treibgas, LPG forklift Load center: 500 mm Dwedex Aw S Tjpfx Ab Tsf ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Like new Technical condition: New Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 60 - 80% Sideshift, 3rd valve, 4th valve, Half-cab,

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany, Wilsdruff 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Dwedpfjx Awzzex Ab Tsf ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, Lithium-ion battery. Dedpfx Aex Eb Nhjb Tjwf Perfect forklift condition We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. ===== WhatsApp in English WhatsApp auf Deutsch WhatsApp en français WhatsApp in French ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Condition: excellent (used), power: 103 kW (140.04 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 244 h, Equipment: air conditioning, Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: DL06V Performance Dodpfx Ajx Am Ideb Tjwf Top speed: 20 km/h Weights Empty weight: 18.500 kg Functional CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: DHKCEWCXCP5002429 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Aeolus Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,04x2,5x2,85 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 2,000 h, load capacity: 7,000 kg, lifting height: 3,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, gearing type: hydrostat, fork length: 2,500 mm, fork width: 2,000 mm, fork thickness: 65 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 8.25-15, rear tire type: superelastic tires (black), rear tire size: 8.25-15, overall weight: 18,600 kg, empty load weight: 11,600 kg, total height: 2,480 mm, total length: 3,900 mm, total width: 2,700 mm, color: orange, Equipment: all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 Looking for a reliable forklift? We are industry specialists! 💼 We offer high-quality forklifts, providing proven machines in excellent condition. ✅ Check out our range and find the perfect equipment for your business! 🔹 Featured in this listing: DOOSAN 70 – 7000 KG – DUPLEX 3000 mm – Year 2013 – 2000 HOURS – DIESEL – UDT CERTIFIED – CONDITION 5/5 🛠️ The forklift is in excellent technical condition and ready for immediate operation. 📊 Key Features and Technical Specifications: Model: DOOSAN 70 Year of manufacture: 2013 Lifting capacity: 7,000 kg Operating hours: 2,000 h Mast type: Duplex Lifting height: 3,000 mm Drive type: Diesel Load center: 600 mm Total weight: 11,600 kg 🔩 Tyres: Solid, superelastic, in good condition Front tyres: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread Rear tyre: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread 📏 Dimensions: Max height (mast lowered): 2,500 mm Overall height: 2,480 mm Overall length: 3,900 mm Dedpfx Ajx Ea D Deb Tjwf Overall width: 2,100 mm Fork length: 2,500 mm Fork width: 200 mm Fork thickness: 65 mm Fork positioner width: 2,700 mm ⚙️ Equipment: 💡 Lighting 🛡️ Enclosed cabin 🥾 Heavy-duty pallet forks 🔄 Hydraulic fork positioner ↔️ Side shift 📦 This forklift is an excellent choice for demanding applications where strength, stability, and precise handling are essential. 🚚 Available for immediate delivery — ask us for a transport quote! 📞 Contact us today and secure your machine!

Condition: used, Siemens 828D control 8 “ Maximum turning diameter: 481 mm Maximum turning length: 545 mm Maximum main spindle speed: 4500 rpm Main spindle motor power: 25 kW Number of tool positions: 12 pcs X-axis travel: 260 mm Z-axis travel: 590 mm Djdpfsx D Uxtox Ab Tjwf Machine length: 3415 mm Machine width: 1900 mm Machine height: 1845 mm Machine weight: 6500 kg Team Eye (possibly camera or inspection module) LNS chip conveyor Tool holder package

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3 h, load capacity: 3,000 kg, lifting height: 4,730 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,165 mm, fork length: 1,200 mm, empty load weight: 4,580 kg, total length: 2,800 mm, drive type: Treibgas, construction width: 1,200 mm, LPG forklift Dedpotnpaiefx Ab Tjwf Load centre of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tyres type: Superelastic Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Description: New device Side shift, 3rd valve, 4th valve, rear work light, front work light, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3 h, load capacity: 3,000 kg, lifting height: 4,730 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,165 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Mast type: Triplex Transmission: Automatic Technical condition: New Front tires type: Superelastic Dedpfx Absv Eff Ro Towf Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Description: New machine including manufacturer's warranty 18 months or 2000 operating hours, UVV inspection NEW, We will be happy to organize inexpensive transport for you. Sideshift, Sideshift integrated 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windshield, full free lift, CE certificate,

Condition: used, Year of construction: 2019, x-travel 900 mm y-travel 550 mm z-travel 500 mm Control FANUC 31i-b tool change unit 30 pos. table-size 1.000 x 500 mm table weight 700 Kg spindle taper HSK - A 63 number of spindle speeds 20.000 U/min/rpm Spindle power 22 Kw Working hours 10.816 h Dodpfx Asx Ak E Hsb Tewf Spindle hours 2.352 h Distance between table and spindle 150/690 mm weight of the machine ca. 9 t dimensions of the machine ca. 2.530 x 2.900 x 3.064 m

Condition: used, Year of construction: 2015, operating hours: 7,473 h, Serial number: dhkceaaucf6001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21920 Specifications: 2015 model 7473 hours 36.2 kW Weight: 6250 kg Machine width: 197 cm Movable boom Chassis (see pictures) Cut Rubber belts Yanmar engine Central lubrication Tiltrotator Sanding bucket Excavator bucket Auxiliary hydraulics Air conditioning/ac Light Radio Ready for delivery Dwsdpfx Aex Aavzjb Tof Description: We have a 2015 Doosan DX62R-3 excavator with rototilt, sanding bucket and backhoe bucket for sale. The machine works as it should according to the owner and it comes with 2 drawers and a rototilt. The machine is in weekly operation so the number of hours will increase slightly. Ready for delivery Hours: 7473 Own weight: 6250 Kw: 36.2 Model: DX62R-3 gravemaskin m/ rototilt, pusseskuffe og graveskuffe

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 509 h, Doosan 77.55 Compressor – 3000 rpm – 8.6 bar – 35.5 kW – Weight 750 kg – 509 operating hours = Additional Information = Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for further information. Dwedsx Dy E Espfx Ab Tef = Company Details = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Year of construction: 1998, CNC Lathe Puma 350, year 1998, Fanuc OT control Max. turning diameter: 770 mm X-axis: 357 mm Z-axis: 1,050 mm Spindle bore: 132 mm Spindle speed: 2,000 rpm Specifications Dimensions / Options Length: 4,000 mm Width: 2,340 mm Height: 2,292 mm Dwsdpfx Abex Dthmo Tsf Weight: 8,000 kg Hydraulic power chuck: 315 mm Tool setter Tailstock Chip conveyor Excellent condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 2,000 h, load capacity: 7,000 kg, lifting height: 3,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, gearing type: hydrostat, fork length: 2,500 mm, fork width: 2,000 mm, fork thickness: 65 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 8.25-15, rear tire type: superelastic tires (black), rear tire size: 8.25-15, overall weight: 18,600 kg, empty load weight: 11,600 kg, total height: 2,480 mm, total length: 3,900 mm, total width: 2,700 mm, color: orange, Equipment: all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 Looking for a reliable forklift? We are industry specialists! 💼 We offer high-quality forklifts, providing proven machines in excellent condition. ✅ Check out our range and find the perfect equipment for your business! 🔹 Featured in this listing: Dwsdpfxox Dr Ace Ab Tsf DOOSAN 70 – 7000 KG – DUPLEX 3000 mm – Year 2013 – 2000 HOURS – DIESEL – UDT CERTIFIED – CONDITION 5/5 🛠️ The forklift is in excellent technical condition and ready for immediate operation. 📊 Key Features and Technical Specifications: Model: DOOSAN 70 Year of manufacture: 2013 Lifting capacity: 7,000 kg Operating hours: 2,000 h Mast type: Duplex Lifting height: 3,000 mm Drive type: Diesel Load center: 600 mm Total weight: 11,600 kg 🔩 Tyres: Solid, superelastic, in good condition Front tyres: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread Rear tyre: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread 📏 Dimensions: Max height (mast lowered): 2,500 mm Overall height: 2,480 mm Overall length: 3,900 mm Overall width: 2,100 mm Fork length: 2,500 mm Fork width: 200 mm Fork thickness: 65 mm Fork positioner width: 2,700 mm ⚙️ Equipment: 💡 Lighting 🛡️ Enclosed cabin 🥾 Heavy-duty pallet forks 🔄 Hydraulic fork positioner ↔️ Side shift 📦 This forklift is an excellent choice for demanding applications where strength, stability, and precise handling are essential. 🚚 Available for immediate delivery — ask us for a transport quote! 📞 Contact us today and secure your machine!

Condition: used, Year of construction: 2018, operating hours: 2,900 h, functionality: fully functional, Perfect machine, for example, for the production of artillery shell housings according to NATO standards or ideal for industries like oil and gas, construction, aerospace and shipbuilding. Very good condition and immediately available. The machine has seen very little use and is in absolutely like-new condition. 21" Doosan Puma 600L 3200 CNC lathe with steady rest (automatically adjustable steady rest) Year of manufacture: 2018 Including steady rest Dwjdpfx Aboxz Hbue Tof Machine operating hours: 2,036 hours Technical specifications: CNC control: Fanuc 32i-MA Max. turning diameter: 900 mm Max. turning length: 3,200 mm Chuck size: 21" Spindle bore: 152 mm Number of tool stations in turret: 12 X / Z travels: 940 mm / 3,200 mm All further information available on request. The machine can be demonstrated under power at any time on site.

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, controller model: FANUC, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 9,870 h, number of slots in tool magazine: 30, VC 430 - worked in 1 shift only. Still precise and well maintained over the years. We need space in december so machine has to go out. Dsdpfx Ajv Acpujb Tswf

Condition: used, Year of construction: 2020, operating hours: 7,800 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 21289   Specifications: • 2020 model• 7800 hours• S70 quick coupler• Width: 349 cm• KW: 202• Weight: 29,400 kg• Rototilt R8• Grapple• Previously on a gold service contract. Now on a standard service contract• Makin 3D GPS• Includes a 1600-liter grading bucket (bucket in picture not included)• Good undercarriage (see pictures)• Includes spike guard• High and wide undercarriage• Large light package• App-controlled Webasto heater• One operator• Central lubrication on both machine and tilt• Extra hydraulics• 360 camera Description: 2020 Doosan 300LC-7 for sale on behalf of customer.The machine appears to be in very good condition and well maintained. Sold with a lot of extra equipment such as R8 Rototilt, grapple, Makin 3D GPS, high and wide undercarriage, large light package, and app-controlled Webasto heater.Ready to go straight to work for the new owner. Hours: 7800 Own weight: 29400 Total Weight: 29400 Dwsdpfx Aboxdhxao Tjf Width: 349 Kw: 202 CE: Yes Engine hours: 7608 Model: DX-300LC7 - HDHW - GPS -

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, Doosan 77.55 compressor – 3000 rpm – 8.6 bar – 35.5 kW – weight 750 kg – 687 operating hours – with new hoses and hammers = More information = Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm. Dsdpfxox Dy D Us Ab Tjwf

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 3,200 mm, turning diameter: 900 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, spindle motor power: 45 W, total height: 2,780 mm, total length: 7,360 mm, quill travel distance: 150 mm, quill diameter: 160 mm, swing diameter over cross slide: 800 mm, overall weight: 21,800 kg, swing diameter over bed slide: 1,030 mm, bar passage: 164 mm, spindle nose: A1-15, Doosan Puma 700L Large Capacity Lathe Built 2014 Accessories include Swarf Conveyor, Tailstock with Mt #6 Taper, SMW Hydraulic Steady, 800mm 3 Jaw Chuck, FANUC 32i Control. Dwodpfxowqf Uuo Ab Tef

Condition: used, Year of construction: 2008, operating hours: 7,690 h, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21905 Specifications: Model year: 2008 Hours: approx. 7,690 71 kW 14,800 kg Undercarriage (see photos) Gjerstad S60 quick coupler Engcon rotor tilt Digging bucket Grading bucket Track width: approx. 60 cm Machine width: approx. 260 cm Blade Central lubrication Extra work lights Radio/CD Dwedpoxzyhhsfx Ab Tsf Air conditioning Description:Doosan DX140LC tracked excavator with approx. 7,690 hours.Comes with Engcon tilt, digging bucket, and grading bucket.One track has been replaced and the other will be replaced before sale.Can be delivered at short notice. Hours: 7690 Own weight: 14800 Width: 260 Kw: 71 Model: DX140LC Beltegraver m/ Engcon tilt og 2 skuffer. Nye belter.

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, Dwsdpfxewnfzcs Ab Tef 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: excellent (used), Year of construction: 2022, Swing over bed 600mm, swing over carriage 400mm, 65mm bar capacity , machining diameter 350mm, machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, Dodpewq Inqsfx Ab Tjwf swarf conveyor, parts catcher, tool setter, tailstock

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, milling speed 12,000rpm, bar capacity 102mm, 40 station ATC, Capto C6 taper, Dodpfeq T Rt Dsx Ab Towf spindle power 26/18.5 kw, Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Dsdpfx Aoxv Svmsb Tewf Main spindle 4000rpm, sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, Dodpfx Asxwytceb Tewf spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.