Used Painting for sale (3,519)

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = compressed air, Material/air ratio = 16:1, Material pressure max. 90 bar, Air inlet pressure 1 to 6 bar, 4 double strokes for 1 liter of material, Isdpfxsiv Huwe Akxoia with gun type MX with double hose, unused since last service 01/20, condition as seen, ex stock Seevetal, subject to prior sale

Condition: new, Year of construction: 2024, 4 PIECES AVAILABLE AT SHORT NOTICE with 15 supports (support surface: piping rubber) dimensions: LxWxH 910 mm x 700 mm x 1850 mm shelf depth: 510 mm shelf width: min. 500 mm - max. approx. 2000 mm Distance clear width from the shelves: approx. 78 mm Load capacity. max.ca. 600 kg evenly distributed load capacity/rake: approx. 40 kg Weight: approx. 90 kg Iiedpfjgmht Sox Akxoa

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Iodpfev Ed Ukjx Akxeia Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: new, Year of construction: 2025, warranty duration: 12 months, total width: 1,900 mm, total length: 1,800 mm, total height: 1,550 mm, SPRAY STRIPPING MACHINE – TECHNICAL SPECIFICATION 1. EXTERNAL DIMENSIONS Width: 1 800 mm Length: 1 900 mm Height: 1 600 mm 2. WORKING DIMENSIONS Width: 1 300 mm Length: 1 300 mm Height: 670 mm* 3. TECHNICAL CHARACTERISTICS Total power: 9.2 kW Iedjghl Dzspfx Akxsia Heating power: 7.0 kW Pump power: 2.2 kW Number of nozzles: 24 Fluid flow rate: 320 l/min Operating pressure: 4.5 bar Operating temperature: 85°C Construction material: AISI 316 (1.4401) acid-resistant stainless steel 4. TANK CAPACITY & HEATING SYSTEM Indirect heating medium: 167 l (±2%) Main tank capacity (stripping fluid): 480 l (±2%) Heating system: indirect heating jacket, separately controlled 5. MACHINE CONSTRUCTION Machine tank equipped with 4 adjustable legs for levelling. Control panel mounted on the machine base. Equipped with an industrial CLICK-CLACK quick-release connector. 6. CONTROL SYSTEM 2 × temperature controllers: One for the heating jacket One for the main processing tank Process time controller LED indicator lights for monitoring correct process operation. 7. DEVICE CAPACITY Suitable for 4–8 rims up to 23”. 8. PLATFORM GRATE Made entirely of acid-resistant stainless steel AISI 316 (1.4401). Serves as a durable, chemically resistant working area for placing rims or other items to be stripped. 9. ROTATING NOZZLE SYSTEM 2 Rotating Arms The machine features two rotating arms, each equipped with a section of the 24 specially engineered nozzles. Nozzles provide multidirectional, high-pressure spraying for fast and uniform paint removal. Designed for maximum coverage, including internal and hard-to-reach areas of the rim. 10. APPLICATION Spray stripping machines represent a modern and highly efficient method of removing paint from alloy wheels. Their use is increasingly appreciated in automotive workshops, tyre services and professional rim refurbishment facilities. Using this machine significantly improves working comfort by providing perfectly cleaned surfaces, allowing all further service operations to be performed faster and with higher precision. 11. KEY BENEFITS Ideal for rim refurbishment centres, tyre services and automotive workshops. Perfect stripping results thanks to counter-rotating spray nozzles. Extends the service life of other tools and machines due to improved pre-cleaning. Optimises employee working time and increases process efficiency. Ensures consistent, precise and repeatable stripping performance.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, workpiece weight (max.): 750 kg, working width: 380 mm, working height: 950 mm, input voltage: 400 V, power: 2.5 kW (3.40 HP), IPM380 Industrial Brushing Machine – For Planing Mills and Large Timber Construction Wherever even more performance or convenience is required, the hybrid brushing machine IPM380 steps in. This machine delivers results that are hard to match: 8 axes, infinitely adjustable, paired with 4 different brush types that can be finely tuned for outstanding finish quality. Your advantages at a glance: Fast: 20–120 m/min feed speed Minimal downtime: 5 minutes setup // 20–45 minutes full cleaning Solid PP material: Almost nothing sticks – easy to clean Hybrid design: Can be converted into a profile spray machine using a quick-swap insert Iedpsw Av T Eefx Akxjia Durable: Made in Denmark, electronics from Germany Expandable: With matching drying technology, automation, and sanding units – we supply complete finishing lines Expert support: We know what we’re doing – and we’re here to advise and assist so that you’re 100% satisfied And for those who need more: We also build this model series in larger formats: 640 mm height × 380 mm width 1,300 mm height × 900 mm width What configuration do you need? You’ll find more details on the Bruhn Lackieranlagen website as well as in the attached video. And of course, we’re personally available to assist you. Simply get in touch to receive a solution tailored specifically to your needs. We look forward to impressing you!

Condition: used, machine/vehicle number: 008157, Max. working width: 250 mm Max. working thickness: 80 mm Extraction system: dry Number of painting guns: 4 Iijdpsw Sdu Uofx Akxea Use: for paint Number of painting circuits: 1

Condition: used, Year of construction: 1990, Motor power: 1 kW Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Power consumption: 2.3 A Iiodpfx Akowv Nbcexja Weight: approx. 120 kg

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Iodowv T R Uspfx Akxjia Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, working width: 400 mm, total length: 2,150 mm, total height: 1,600 mm, total width: 1,000 mm, working height: 950 mm, input voltage: 400 V, year of last overhaul: 2025, power: 1.5 kW (2.04 HP), warranty duration: 12 months, compressed air connection: 8 bar, - DEMO machine from our technicial center for special price! - Since 1970 Ceetec A/S produces wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our brush painting machine A250 is equipped with flood nozzles for painting all around and with up to 8 brushes (each 2 per side) and can paint wood for interior and exterior on all four sides in one shift. Speed: 16-42m/min max. height: 250mm max. width: 250mm resp. 380mm (A380) min. length: 800mm It can be combined with our innovative drying systems or used as a stand alone machine. Iiedpfx Akjffc Raexsa You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: used, Year of construction: 1990, Used machine Built approximately 1990 Iedpfx Akowb Ehvsxsia Technical specifications: W x H 2000 x 1600 mm + 2 side baffles and 1 top baffle Fan diameter 500 mm Availability: Short term Location: Rhineland-Palatinate

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm Iiedpjtt Sy Refx Akxea width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: new, Year of construction: 2025, RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction fan is placed at the top of the filter wall, its electrical motor is placed out of the fan channel and there is no direct contact of the motor with the contaminated air in order to avoid the risk of spark. FILTRATION SYSTEM Extraction filter is used as 2 stages with 99,9% efficiency, placed at the side of the spray booth filter wall. There is a pre-filter at the door curtain that maintains natural airflow inlet during extraction fan is operating. Warning lamp at the control panel indicates service need when the filters get contaminated. Isdpjvxfkajfx Akxoia Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: used, Year of construction: 2010, functionality: fully functional, Wagner Powder painting equipment for sale! Powder coating device, year 2010 consisting of: Booth: Prima Cube 16000 Powder supply: Powder Center Powder recovery: Cyclon Filter 16000 Movement generator: KHG 350 Production process configurations INCLUDING: I. Presumes Maximum size of parts: LxWxH=2600x400x1850 mm II. Equipment Technological Conveyor automatic speed V=1.2 mtrs/min. Speed regulation between 0.5-2.5 mtrs/min 1. Pretreatment Stand MNA-3-LPG, total size 16,7 mtrs Enter size L=2,5 mtrs a. Washing, degreasing and phosphating; L=3,6 mtrs -number of spray frames – 10 -number of nozzles in frame – 18 -number of nozzles in total – 180 -delivery of the pump – 162 m3/h -power of the pump – 15 kW -vessel 4 m3 for active liquid -inner heat exchanger with LPG burner – 160 kW -temperature 500C -mechanical oil separator - solution filter -the dosing system, membrane pump with regulator -washing time – 3 min b. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec c. First rinsing; L= 1,2 mtrs -number of spray frames – 4 -number of nozzles in frame – 18 -number of nozzles in total – 64 -delivery of pump – 38 m3/h -power of the pump – 3 kW -vessel 1,5 m3 for water -first rinsing time – 1 min c. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec Iiedpfx Asww Adtskxsa d. Fine rinsing; L= 1,28 mtrs -number of spray frames – 3 -number of nozzles in frame – 18 -number of nozzles in total – 54 -delivery of pump – 33 m3/h -vessel 1,5 m3 for water -power of the pump – 3 kW -one extra spray frame -number of nozzles in frame – 18 -fine rinsing time – 1 min e. Dripping zone L= 2 mtrs -time of dripping – 1 min 40 sec Three openings to connect to exhaust system with three ventilators Operating space made of stainless steel. Pipes made of PVC or S/S. 1 unit 2. Automatic Dryer after water AST-1-KLPG: - operating space dimensions LxWxH=7000x3000x2800 - air curtains each side to avoid heat losses - one indirect heat exchanger heated with liquid petrol gas to produce 200 kW of rated power - three blowers 6000 m3/h of air delivery - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - drying time 10 min 1 unit 3. Automatic Curing Oven APT-2-KLPG for curing powder paints - operating space dimensions LxWxH=10200x3600x2800 - air curtains on one side to avoid heat losses - two indirect heat exchangers heated with liquid petrol gas to produce 300 kW of rated power, of each - eight circulation blowers, capacity of each 6 000 m3/h - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - curing time 25 min 1 unit 4. An overhead rail conveying system ATR-ADAX, for the paint shop including the following: • straight track with hangers L=400 mm 146 mtrs • drive station 2 pc • tension station 1 pc • chain lubrication station 1 pc • drawing of the track supporting structure 1 set

Condition: used, Year of construction: 2015, functionality: fully functional, The Datacolor 500 is a device representing a spectrophotometer that measures, calculates, and expresses color in a precise and objective manner, making it possible for color to be communicated and reproduced accurately. The spectrophotometer can measure a wide range of materials, including synthetic or natural fabrics, liquids, plastics, paper, metal, painted substrates, and, in some cases, multi-colored materials. In industries such as textiles and apparel, spectrophotometers enable companies to define color standards and tolerances, allowing supplier samples to be compared and measured against these standards. Spectrophotometers measure the wavelengths of light absorbed and reflected by a color sample and then quantitatively convert this data into color values that can be interpreted by color management software. Purchased in 2015 from Datacolor AG, Switzerland. Iisdjxrypyspfx Akxoa

Condition: excellent (used), functionality: fully functional, Varnishing machine consisting of an automatic applicator and a drying tunnel. UV varnish application using rollers. Laying using an automatic stacker. Varnishing format B1+ Iedpfswhdbnox Akxoia

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Iisdpfsw Hw Dgsx Akxja

Year of construction: 2020, condition: new, ROMER® is the largest producer of powder paint shops in Poland, and one of the largest in Europe. ROMER® is over 10,000 manufactured devices operating in over 45 countries around the world. Iijdjfzq Ryspfx Akxja ROMER® Produces single technological equipment for powder paint shops as well as complete fully automatic turnkey paint shops. ROMER® provides heating solutions for the aero and automotive industries for the largest concerns in the world. We provide warranty and post-warranty service of the devices we sell with a full range of spare parts.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Iisdpfsfz Ndyex Akxoa Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Iisdof Aad Njpfx Akxea Bmt7r28v0e They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Iisdpfx Aefz A H Dskxoa Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. Iedpfjflrc Sjx Akxeia ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Condition: new, Year of construction: 2025, Paint booth, TM1010 paint wall made of INOX stainless steel. Working dimensions (mm): 1000 (w) x 1000 (h) x 600 (d) Overall dimensions (mm): 1200 (w) x 2200 (h) Technical data: 1,1 kW fan power, Capacity 4500 m³/h, Compression 870 Pa, 3 stage air filtration, 96% filtration degree, Explosion proof Ex fan, Ijdod S N Swopfx Akxsia Inverter to adjust the fan rotation speed, IP 66 control panel, Hermetic lighting IP 65. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Iedsp S Tlhepfx Akxeia Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, total height: 3,130 mm, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, Equipment: cabin, The automotive spray booth is a fundamental device in paint repair technology, enabling painting work to be carried out in safe and comfortable conditions while minimizing the negative impact on the surroundings and the environment. Specifications: - External dimensions: 7000 × 4000 × 3130 mm - Internal dimensions: 6900 × 3900 × 2700 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 640 × 1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS polystyrene - Total power: 7 kW - Installation: indoor only Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface - Installation possible only indoors Double Roof: - Upper external layer: corrugated steel panels - Inner structure: partially grated Air Circulation System (Supply System): - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 20,000 m³/h - Belt-driven system - Air recirculation control: none Lighting (Side Lights): - 20 side-mounted lamps - No option for ceiling lighting Air Heating System: - Single-stage Riello G10 oil burner, 54–120 kW - Manual burner control - Heating time: approx. 20 minutes Cabin Access: - Main Doors: - Dimensions: 3200 × 2600 mm - Three-leaf door system - Service Door: - Equipped with a separate service door - Pressure locks installed Filtration System: - Air intake: Pre-filter - Ceiling filter: Main high-flow filtration Filter Specifications: Iodoxnbf Ujpfx Akxsia - Weight: 600 g/m³ - Thickness: 50 mm - Airflow: 900 m³/h - Capture efficiency: 97% - Air velocity: 0.25 m/s - Dust holding capacity: 650 g/m³ - Max temperature: 100°C - Filtration class (EN 779): M5 - Fire resistance (DIN 53438): F1

Condition: excellent (used), drying rack for drying parts after painting double-sided length of shelves 780mm maximum distance 2520mm minimum distance 350mm 22 shelves bars covered with rubber mobile construction Iisdpfxevbf Ece Akxsa clearance between bars 115mm