Used Pad Printer for sale (3,749)

Year of construction: 2022, condition: new, Brand new, 4 color precision pad printer with 3 year warranty! Specifications: Electrical: 230V/ 50Hz/ 10A Controller Voltage: 24 DC Air pressure: 6 bar Air volume: 600 Nl/min Weight: 280 kg Gsdon Ry R Eopfx Ak Uokb !!! Full customization available. We have three units in stock !!! Please check out our other listings as well.

Condition: good (used), Year of construction: 2007, Please check out our other listings as well. Gkjdpen Ry Nvefx Ak Ueb

Condition: good (used), The unit sold as is, with one month warranty. !!! Full refurbishing also available !!! Please check out our other listings as well. Gsdpjn Ry Udsfx Ak Uskb

Condition: refurbished (used), Good working condition. Please check out our other listings as well. Gkedpjn Ry Utjfx Ak Uob

Condition: good (used), We can sell the unit as is or fully refurbished. Please check out our other listings as well. Gkedpfen Uwc Eex Ak Ujb

Condition: new, Year of construction: 2022, 2 Color Pad Printer with Servo & Linear Table Specification: Electrical: 230V/ 50 Hz/ 10A Controller Voltage: 24 DC Gksdpfxen Ry Tks Ak Usb Air Pressure: 6 bar Air Volume: 600 Nl/min Weight: 200 kg Custom solutions available! Please check out our other listings as well.

Year of construction: 2020, condition: new, Brand new OEM unit with 4 servos. Gsdpfx Asn Ry T Sek Ujkb For printing XXL size items (such as engine covers, even curved products) Year 2020 0 Work hour With warranty Electrical: 400V/ 10A Please check out our other listings as well.

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Gjdpfsw H Naaox Ak Uekb Including pallet with tools and spare parts

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during the liquidation of a company. Flowpack machine ITALDIBIPACK Dibiflow 500 – Year of manufacture 2021 – Very good condition For sale is a high-quality flowpack packaging machine from the manufacturer ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in very good, well-maintained condition and is ideal for the efficient packaging of a wide variety of products in tubular bags. Technical data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Connection: 400V – 3Ph + T + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Equipment & Features Robust construction High-quality sensors for product and film detection Adjustable guide rails for different product widths Clean, modern control and drive technology Ideal for food, non-food, industrial products and more CE marking Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors and the entire mechanics are in very good condition (see pictures). Gkodpfxsxw S Ixo Ak Uob Price Negotiable – €13,000 + €4,000 printer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, printer was rarely used at university which does not use it any more Gsdpfxow Inrco Ak Uokb

Condition: excellent (used), Year of construction: 2022, Oce Arizona 2380 GTF Flow (FineArt) LED Newest generation of Canon with flow technology Color: 8C CMYK lClM, 2 White GT format: 2.5m x 1.25m Only 13,500 m² printed Speed up to 90 m²/h Automatic printhead cleaning Gjdpfx Aozwdhdsk Uskb Registration pins: pneumatic (easy loading) New user interface Flow technology for heavy materials such as glass... In top condition, like new.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, total length: 495 mm, total height: 520 mm, total width: 457 mm, construction height: 300 mm, construction width: 240 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Build volume X-axis: 330 mm Build volume Y-axis: 240 mm Build volume Z-axis: 300 mm Filament diameter: 2.85 mm Nozzle diameter: 0.25 mm, 0.4 mm, 0.8 mm Printing speed: < 24 mm³/s XYZ resolution: 6.9 / 6.9 / 2.5 µm Layer resolution with 0.25 mm nozzle: 60–150 µm Layer resolution with 0.4 mm nozzle: 20–200 µm Layer resolution with 0.8 mm nozzle: 20–600 µm MACHINE DETAILS Technology: Fused Filament Fabrication (FFF) Print head: Dual extrusion print head with automatic nozzle lift system and interchangeable print cores Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway Operating temperature: 15–32 °C Relative humidity during operation: 10–90 % RH, non-condensing Non-operating temperature: 0–32 °C Supplied software: UltiMaker Cura, Cura Connect Supported operating systems: macOS, Windows, Linux Plugin integration: SolidWorks, Siemens NX Supported file types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, UFP Connectivity: WLAN, LAN, USB Display: 4.7 inch (11.9 cm) color touchscreen Monitoring: Live camera Operating noise: 50 dBA Build plate temperature: 20–140 °C Build plate leveling: Active leveling Nozzle temperature: 180–280 °C Nozzle preheating time: < 2 min Build plate preheating time: < 4 min from 20 °C to 60 °C Power consumption: 500 W Dimensions & Weight Machine dimensions: 495 × 457 × 520 mm Machine dimensions with Bowden tubes and spool holder: 495 × 585 × 780 mm Net weight: 20.6 kg Shipping weight: 29 kg Shipping carton dimensions: 650 × 600 × 700 mm FEATURES Godpezx S D Aofx Ak Ujkb Dual extrusion print head Automatic nozzle lift system Interchangeable print cores Heated glass build plate Heated aluminum build plate PEI build plate Active build plate leveling Abrasion-resistant dual-gear feeder NFC scanner for material recognition Color touchscreen Live camera Spool holder with material guide Print Core AA 0.4 mm, 2 pieces Print Core BB 0.4 mm, 1 piece Nozzle cover, 3 pieces Power cable User manual CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be arranged by the buyer! The unit will be available from October 2026! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible Print Cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90 % RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90 % RH, non-condensing Placement: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Weight in operation: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lifting system Interchangeable Print Cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Gjdpfjzx S Dvsx Ak Uekb Spool holder with material guide Power cable Ethernet cable USB stick User manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: used, Year of construction: 2021, functionality: fully functional, System for oiling and staining solid wood flooring / parquet flooring Manufacturer: Cosma Gjdpfx Akszzdm Ij Uekb Year of manufacture: 2021 Working width: 400 mm Passage heights: 10 - 50 mm Part lengths: from approx. 700 mm consisting of: - Roller application machine, manufacturer: Cosma, type 400 RC equipped with 1 rubber-coated application roller, approx. 25 Shore, and 1 metering roller for applying oil Feed speed adjustable, 3 - 15 m/min. with stainless steel collection tray for easy cleaning during material changes with electric height adjustment and mechanical height indicator - Spreader machine, manufacturer: Cosma, type 400 2P2S (year of manufacture: 2021) 1x spreader pad, 0.37 kW, rotating to the left 1x spreader pad, 0.37 kW, rotating to the right 1x spreader brush, 0.37 kW, speed infinitely adjustable 100 - 300 rpm, co-rotating, electric height adjustment 1x spreader brush, 0.37 kW, speed infinitely adjustable 100 - 300 rpm, counter-rotating, electric height adjustment - 1x pad brush cleaning machine and 1x longitudinal brush cleaning machine, manufacturer: Cosma, type CU Pad + CU Brush

Condition: refurbished (used), Year of construction: 2014, Vutek GS 5000 R, fully refurbished (always maintained under Vutek’s full-service program) Color: 8C + White Resolution: 12 pl / 1000 dpi Speed: up to 275 m²/h Gkjdey U Hmajpfx Ak Ujb Includes: MESH/Textile Kit Trial roll: 1.6 m EFI Fiery server 3-month warranty

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 500 h, input voltage: 230 V, input current: 15 A, input frequency: 60 Hz, We are offering this very well-maintained Z Corporation ZPrinter 650 3D printer, manufactured in 2015, for sale. Voltage: 100/115/230 V Current: 15/15/8 A Gksdpfx Aszzk Ufjk Ujb Frequency: 50-60 Hz We are a workshop for people with disabilities and are selling the printer because we no longer have the demand for the products it produces. The printer has been used very little and is therefore in very good condition. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2022, number of ink cartridges: 6, number of print heads: 1, paper width (max.): 914 mm, HP DesignJet T930 is for sale, fully operational and in excellent condition. Upon sale, we will replace the printhead to ensure the printer is in perfect working order. Gedpfx Aozz Hy Rok Uokb There are two machines available, and they can be sold either together or separately. Please do not hesitate to contact me should you require any further information or clarification. Kind regards, Christos Konstantinou

Condition: refurbished (used), Year of construction: 2020, efi Vutek Pro32R + LED Roll Printer 12 Ricoh Gen 5 printheads, 7pl UltraDrop technology Color: 4C + White (for overprinting and underprinting) Year of manufacture: 2020, installed Gkodpfxozqgn Hs Ak Usb Fully refurbished, with all printheads replaced with new ones Speed: up to 256 m²/h Printer has been completely cleaned: carriage completely overhauled, new printheads and tubes Filters and Matan firmware updated, etc.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SN24027024146, Year of construction: 2024, total length: 580 mm, total height: 910 mm, total width: 700 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Installed nozzle diameter: 0.4 mm MACHINE DETAILS Voltage supply: 100–240 V AC Power consumption: Max. 10 A Mains frequency: 50–60 Hz Frequency band: 2,400.0–2,483.5 MHz Max. radio frequency output power: < 100 mW EIRP Gksdpfxozx S Eao Ak Ujb WLAN standard: IEEE 802.11 b/g/n Operating temperature: 18 °C for PLA up to 38 °C Max. humidity: Max. 85 %, non-condensing Dimensions & Weight Dimensions (W x D x H): 580 x 700 x 910 mm Weight with packaging: Max. 35.0 kg Weight without packaging: Max. 25.3 kg EQUIPMENT Satin powder-coated print bed PEI print bed Spool holder with material guide Power cable USB drive 5 × brass nozzle, 0.4 mm 5 × hardened nozzle, 0.6 mm Operating manual Testing information Note: Print head cable 3 must be replaced.

Condition: used, functionality: fully functional, machine/vehicle number: G7000034, Year of construction: 2021, operating hours: 12,000 h, The printers were purchased in July 2021, original price: €87,500. Regular maintenance was carried out by Stratasys. Reports are available. The printers are in top condition and fully functional. All print heads are present and in good condition. The printers are ready for collection. Gksdjzd Rtaopfx Ak Usb

Condition: used, functionality: fully functional, machine/vehicle number: G7000046, Year of construction: 2021, operating hours: 12,000 h, Stratasys Objet500 dental printer Gkjdpfszd Ruqox Ak Ueb Purchased in July 2021. Original price: €87,500 Regular maintenance performed by Stratasys. Maintenance reports available. Excellent condition, fully functional. All print heads are installed in the printer and are functional. Machine ready for pickup.

Condition: used, functionality: limited functionality, Year of construction: 2013, operating hours: 5,400 h, Stratasys Objet Connex 500 industrial multi-material PolyJet 3D printer available for sale in the UK. Gkjdpfx Aszy Rwqsk Ujb The machine has approximately 5,400 operating hours and powers up successfully. When inspected, the machine was not displaying print-head errors. The printer has not recently completed a test print because the printing materials/resins currently installed have expired. We are therefore selling the machine transparently as requiring recommissioning and fresh materials before full production operation can be confirmed. The Connex 500 is an industrial PolyJet additive manufacturing system designed for professional prototyping and multi-material applications. Its large build platform and ability to work with different material characteristics made the Connex range particularly suited to engineering, product development and prototype production. The machine was removed from a commercial environment and is now surplus to requirements. Known condition: Powers up successfully Approximately 5,400 operating hours No print-head errors observed during inspection Existing resin/material is expired Full print cycle has not been tested with fresh material Offered in its present condition Inspection welcomed prior to purchase This could represent a good opportunity for an existing Stratasys/Objet user, specialist reseller or refurbishment company familiar with the Connex platform. The machine is located in the United Kingdom. Further photographs and a video showing the machine powered on can be supplied on request.

Condition: used, functionality: fully functional, machine/vehicle number: L2406, Year of construction: 2023, operating hours: 494 h, total length: 2,772 mm, total height: 2,281 mm, total width: 1,683 mm, overall weight: 2,869 kg, input voltage: 230 V, input frequency: 60 Hz, ambient temperature (max.): 29 °C, table width: 609 mm, table length: 914 mm, Equipment: compressor, FDM Technology We offer the Stratasys F900 industrial-grade 3D printer, which utilizes advanced FDM (Fused Deposition Modeling) technology. The system supports 14 certified materials, including biocompatible, flame-retardant, UV-resistant, weather-resistant, antistatic, flexible, engineering-grade, tooling, chemical-resistant, and high-temperature-resistant materials. Gedpozv S Rksfx Ak Uekb The Stratasys F900 is an industrial FDM 3D printer designed for high-performance additive manufacturing. It enables serial production, functional prototyping, tooling and fixture production, and the production of parts for final products. The printer supports the MTConnect platform, has an integrated monitoring camera, allows for unattended operation, and ensures repeatable, industrial-quality production. It supports native CAD files from SolidWorks, CATIA, Siemens NX, Autodesk Inventor, and other systems. -Large build volume: 914 × 610 × 914 mm. -14 certified engineering materials. -Layer thickness: 0.127 / 0.178 / 0.254 / 0.330 / 0.508 mm. -Accuracy up to ±0.089 mm. -Heated, enclosed build chamber. -Soluble or breakaway support material. -Suitable for prototypes, tooling, and end-use parts. Optional equipment: -Transformer -HW upgrade for the F900 system – dedicated print head for hard materials: -Nylon 12CF and Antero 800NA (reinforced material feed motors) -Set of accessories and fixtures from the manufacturer for brand new STRATASYS 3D printing systems -GrabCAD, Insight, and Control Center software

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 1,770 mm, total width: 600 mm, total length: 617 mm, input voltage: 230 V, type of cooling: air, Equipment: documentation/manual, type plate available, Thanks to the enclosed construction cartridge system, this 3D printer is ideally suited for prototype construction, the dental field, or even for training purposes, as there is no contact with the metal powder – neither during the component preparation nor during the printing process itself. AL3D-METAL 200-100 3D metal printer for additive manufacturing LASER TYPE: Fiber laser Wavelength: 1070 nm Average power: 200 W Operating mode: CW Focus diameter: 50 μm Scanning speed: max. 5 m/s Process parameters: Option to comprehensively influence the process parameters INCLUDES 9 CONSTRUCTION CARTRIDGES: Build volume: r Ø 100 mm; z 60 mm Layer thickness: 10 - 50 μm Gedjzlnh Rjpfx Ak Uskb Achievable component density: > 99 % SOFTWARE AL3D-OS Operation: via 15.6" touchscreen, keyboard, and mouse Connectivity: 1x Ethernet; 2x USB CAD import file format: STL Print preparation: Simple support generation. Slicer integrated into the software.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, overall weight: 550 kg, input voltage: 230 V, warranty duration: 12 months, input current: 16 A, electrical fuse: 16 A, feed length X-axis: 1,000 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, power: 3.2 kW (4.35 HP), BigRep STUDIO G2 – Large-format industrial 3D printer | serviced | PEI | AI monitoring | 12 months support For sale is a BigRep STUDIO G2 industrial large-format FDM 3D printer from our machine inventory. The machine will not be sold in an "as is" condition without inspection. Before handover, the printer will be fully technically inspected, serviced, and prepared for production by us. Special advantage: Technical support is provided by ThinkBig3D, which has many years of BigRep service experience. I myself worked for several years as a service technician directly at the manufacturer BigRep and continue to provide professional support for BigRep systems. Gjdpfszz In Ajx Ak Uokb Included in the purchase price: BigRep STUDIO G2 Complete technical inspection and maintenance before handover PEI switch plate including magnetic base PrintShield AI-based print monitoring Machine commissioning at the buyer's location Operator and user training 12 months of technical service & support from ThinkBig3D Support for setup and production start-up Technical data Manufacturer: BigRep GmbH Model: STUDIO G2 Year of manufacture: 2019 Manufacturing process: FFF/FDM Build volume: 1,000 × 500 × 500 mm Voltage supply: 230 V Fuse rating: 16 A Power consumption: approx. 3.2 kW Machine weight: approx. 550 kg The STUDIO G2 is particularly suitable for the production of large-format prototypes, jigs, models, molds, functional parts and small series. Typical areas of application include automotive, machine and plant engineering, model and mold making, architecture, research & development, marine/boatbuilding, as well as art and design. PEI Switchplate The machine will be equipped with a PEI switchplate. This system facilitates the removal of components and provides a reliable printing surface for professional use. PrintShield – AI-based print monitoring In addition, the machine will be equipped with our self-developed PrintShield system. Using cameras and AI-based monitoring, ongoing printing processes can be monitored, and typical printing errors or anomalies can be detected. This provides additional process reliability, especially for large-format components and multi-day printing jobs. Commissioning & training included As part of the handover, training for the operating personnel will also be provided. Topics covered include machine operation, print preparation, material handling, print bed/PEI switchplate, basic process parameters, maintenance and care, troubleshooting, and the use of PrintShield. 12 months service & support The purchase price includes 12 months of technical service and support from ThinkBig3D. This ensures that the buyer has a contact person with extensive BigRep experience even after the machine handover. The machine can be inspected and demonstrated in Berlin by appointment. A test print is also possible after prior consultation. Price: €27,900 net plus statutory VAT – negotiable Sale by ThinkBig3D. Transport or delivery can be arranged upon request. Note regarding the images: Some of the product images used have been digitally retouched for better representation and may contain AI-generated content. The machine actually offered is shown in the original images. The technical specifications and described equipment features refer to the machine that is actually for sale.