3D Printer FDM

Stratasys Fortus 450mc

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Pgedpfx Aozixy Sengeu Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier II (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier III (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and Highpressure, 80 bar Pgedpfx Anezr Dd Uogsu Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Rawmaterialfeed:Barlaoder, FMB SL 80S Finished part removal:Unloading device (NC-controlled) with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. used static Toolholder

Condition: used, functionality: fully functional, machine/vehicle number: 155-10000, Year of construction: 2014, operating hours: 17,700 h, total length: 1,281 mm, total height: 1,962 mm, total width: 895 mm, type of input current: three-phase, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, STRATASYS FORTUS 450mc INDUSTRIAL 3D PRINTER Located in ALBACETE, SPAIN US-built · Documented ULTEM licences · Material included From a professional service bureau that has now closed. Tested and fully functional: powers up, initialises and reaches Idle with no faults. === VERIFIED JOB HISTORY === We hold the machine's complete job history export, which records the material used on every job. 2,807 jobs recorded between December 2015 and October 2024. 2,478 completed successfully (88.3%). ULTEM 9085 — 662 jobs, the most-used material here; last run October 2024 ASA, 5 colours — approx. 1,315 jobs Nylon 12 — 205 jobs ABS-M30 and ABS-M30i — 204 jobs Polycarbonate (PC) — 164 jobs ULTEM 1010 — 155 jobs, 27 on the CG grade ABS-ESD7 — 98 jobs ST-130 — 4 jobs A machine will not print a material without its licence activated, so the history is direct evidence of licence status. We send the full file to any buyer who asks. === MACHINE DATA === Model: Stratasys Fortus 450mc, 3D Production System P/N: 155-10000 Manufacturer: Stratasys, Eden Prairie, Minnesota, USA Build date: December 2014 Technology: FDM, dual extruder, heated build chamber Build envelope: 406 × 355 × 406 mm Supply: 120/208 V, 18.0 A, 3W+N+PE, 50/60 Hz Approvals: TÜV SÜD NRTL (US/C), CE, FCC Part 15 Tips fitted: T16 model + T16 support Accumulated hours: approx. 17,700 h Weight: 601 kg · Dimensions: 1,281 × 895 × 1,962 mm Heavy use between 2016 and 2022, light use since. === US-BUILT MACHINE — 208 V === Pjdpoy U H Hmofx Angogu The machine sits in Albacete, but it is not a European machine. The data plate reads Stratasys, Eden Prairie, Minnesota (photograph in this listing): it is US specification, 208 V. In Spain it has run through a step-down transformer, which is supplied with it. For a US buyer this counts twice: it plugs straight in with no electrical conversion, and US-origin goods returning to the United States can enter under HTS 9801.00.10, with no time limit on US-origin products. === MATERIAL INCLUDED — approx. €7,270 === ULTEM 9085 and ULTEM 1010 with their supports, ST-130, PC-FR flame retardant, ABS-ESD7, ABS-M30 and M30i, ASA in five colours, PC-ISO and soluble supports SR-30, SR-100 and SR-110. Itemised inventory, canister by canister with remaining volume measured, in the attached PDF. Part of the stock is Stratasys original and part is validated third-party material (iSQUARED, and Kimya PC-FR under the Stratasys Validated Materials programme). === APPLICATIONS === Aerospace, defence, automotive, medical, industrial tooling and functional prototyping. ULTEM 9085 meets FST (flame, smoke, toxicity) requirements, which suits this machine to aircraft interior parts and certifiable tooling. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: under power, by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE1-STRATASYS Full data sheet in the attached documents. Every figure comes from the machine itself and can be verified on inspection.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 155-110000, Year of construction: 2017, operating hours: 20,000 h, total length: 1,300 mm, total height: 2,000 mm, total width: 900 mm, overall weight: 601 kg, input voltage: 380 V, input current: 8 A, For sale: Professional industrial Stratasys Fortus 450mc FDM 3D printer in exceptionally good condition. A highly reliable and precise 3D printer, ideal for functional prototypes, jigs/fixtures, and end-use components in technical plastic materials. The machine is supplied as a complete, turnkey solution, including an SCA 3600 post-processing station, a wide range of print nozzles (tips), material canisters, and consumables. Specifications & Machine Information * Model: Stratasys Fortus 450mc * Serial number: K10456 * Software version: 6.8.7102.0 * Build volume: 406 x 355 x 406 mm * Activated material licenses: Extensive license package included: * ABS (ABS-M30, ABS-M30 Black/Blue/Custom/Grey/Red/White, ABS_ESD7, ABS_M30I) * ASA (FLUX/BLU, DGRY, GRN, LGRY, ORG, RED, WHT, YEL, BLK) * PC / PC-ABS / PC-ISO (incl. PC-ISO Translucent & PC Support) * Nylon 12 / NYL12CF (Carbon Fiber) * Antero 800NA / Antero 840CN03 * ST130 Pedpezqz Hwofx Angogu * Soluble Supports (SR30, SR35, SR100, SR110) Included equipment & accessories 1. Post-processing & Chemicals * SCA 3600 (Support Cleaning Apparatus): Washing station for easy and automatic removal of soluble support materials (SR30/SR100/SR110). * WaterWorks Concentrate P400SC: Cleaning concentrate for washing tanks. 2. Nozzles & Print Head Components (Tips) Large, assorted selection of print and support nozzles, as well as scrapers (see image): * Modeling tips: T12, T14, T16, T20, T20C * Support tips: T12SR100, T12SR30, SR30/35, U1010S1, ULTEM Support T16, etc. * Extra scraper blades/cleaners. 3. Materials & Canisters Large selection of filament spools/canisters and original boxes included (incl. ULTEM 9085, ULTEM Support, ASA, ABS-M30, PC Support, SR-110 soluble support, etc. – please note that some may be partially used or past their expiration date, but have been stored in a dry place).

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Pjdpfxoza E S Do Angjgu

Condition: ready for operation (used), Year of construction: 2018, operating hours: 16,330 h, total height: 1,984 mm, total width: 1,270 mm, travel distance X-axis: 406 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 406 mm, product length (max.): 902 mm, number of axes: 3, This 3-axis Stratasys Fortus 450mc was manufactured in 2018. It features a working area with an X-axis width of 406 mm, Y-axis depth of 355 mm, and Z-axis height of 406 mm. The machine supports a variety of materials including ABS-M30, Nylon 12, and ULTEM. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Fortus 450mc machine we have for sale. Contact us for further details. • Supported / licensed materials installed on the system: ABS-ESD7, ABS-M30, ABS-M30i, ASA, Nylon 12, Nylon 12CF, PC, PC-ABS, PC-ISO, ST130, Antero 800NA, ULTEM 1010, ULTEM 9085 • Installed configuration with 2 print heads: one dedicated head for standard plastic materials and one dedicated head for carbon fiber materials Pgjdoy R A Urepfx Angou • Support structure: Soluble or breakaway depending on model material • Layer thickness options: 0.330 mm, 0.254 mm, 0.178 mm, 0.127 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: K00219, overall weight: 601 kg, construction height: 406 mm, construction width: 355 mm, Submitting a bid obligates the bidder to collect the item by 14.01.2026! Pedpjx Hwgnofx Angegu TECHNICAL DETAILS Build volume: 406 mm x 355 mm x 406 mm Layer thicknesses: 0.127 mm, 0.178 mm, 0.254 mm, 0.330 mm Volume cassettes for build and support material: 1,510 cm³ / 3,020 cm³ Achievable accuracy: ± 0.127 mm or ± 0.0015 mm/mm Z accuracy: −0.000 / +layer height MACHINE DETAILS System dimensions: 1,295 mm x 902 mm x 1,984 mm Weight: 601 kg Input voltage: 420 V Supply voltage: 208 V AC Phases: 3 Frequency: 50/60 Hz Current consumption: 18 A Network connection: 10/100 Base-T Protocol: Ethernet Standards: CE, cTUVus, RCM, EAC, FCC Part B EQUIPMENT Insight™ Software Control Center™ Software GrabCAD Print compatibility SCA 1200HT support material cleaner Compatible with iSQUARED materials: ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, ULTEM 1010 Note: One of four cassettes requires servicing.

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) Pgedpfxeyalqye Angju 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, total length: 1,290 mm, total height: 1,980 mm, total width: 900 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 240 V, input current: 40 A, temperature: 160 °C, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, positioning accuracy: 0.127 mm, electrical fuse: 40 A, repeat accuracy: 0.05 mm, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, space requirement length: 2,000 mm, space requirement height: 2,200 mm, noise level: 65 dB, space requirement width: 1,500 mm, High-performance industrial 3D printer based on FDM technology, designed for functional prototyping and low-volume production using certified engineering thermoplastics. The Stratasys Fortus 450mc is a proven platform for companies requiring repeatability, dimensional stability, and material traceability, making it suitable for automotive, aerospace, industrial equipment, and advanced R&D environments. The system is configured with dual extrusion heads in open material mode, enabling advanced process flexibility and compatibility with a broader range of FDM-grade thermoplastics, subject to parameter optimization and the thermal constraints of the platform. Key Features: - Heated build chamber (up to ~180°C) for superior layer adhesion and reduced warping - Industrial-grade repeatability for functional and end-use parts - Large build volume: 406 × 355 × 406 mm - Dual extrusion system (model + soluble support) - Closed material system for process stability and consistency - Compatible with Insight software for advanced process control Supported Materials: 🔹 Standard & Functional Polymers Podpey Ug Ecefx Angegu ABS-M30 → robust functional prototyping ASA → UV-resistant outdoor applications ABS-ESD7 → electrostatic dissipative components 🔹 High-Performance Polymers PC (Polycarbonate) → high impact resistance PC-ABS → balance between toughness and processability 🔹 Advanced Engineering Materials Nylon 12 (PA12) → wear resistance and fatigue durability Nylon 12CF (carbon fiber reinforced) → increased stiffness and dimensional stability 🔹 Aerospace-Grade Thermoplastics ULTEM 9085 → FST compliant (flame, smoke, toxicity) ULTEM 1010 → maximum thermal resistance and mechanical strength

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine Pgjdsxabt Aspfx Angsu - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes