Used Pad Printer for sale (4,404)

Condition: like new (used), Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: A0010820023, compressed air connection: 8 bar, input voltage: 220 V, total width: 300 mm, total length: 670 mm, total height: 610 mm, overall weight: 55 kg, input current: 3 A, power: 0.7 kW (0.95 HP), input frequency: 50 Hz, control type: PLC-controlled, degree of automation: automatic, actuation type: pneumatic, Equipment: CE marking, documentation/manual, The machine has only been used for demonstration purposes in a showroom. It is as good as new. It can be integrated into a production line and connected to an external PLC for remote control. Equipped with an Ethernet port. Maximum number of colors: 1 Printing force: 1300 N Can accommodate both circular and oval cups Maximum print diameter: Ø 85mm Maximum cup size: Ø 90mm (circular), 70x135mm (oval) Maximum cliché size: 140x240 mm Horizontal stroke / doctoring: 125 mm Vertical stroke: 100 mm Theoretical maximum speed (1 color): 1800 cycles/hour Bjdjxd Uyqopfx Acyoww Maximum pad height: 100 mm Drive: Electropneumatic Power supply: 230V 50-60Hz Weight: 100 kg Average energy consumption: 102 kWh Compressed air consumption: 8l/min (6 bar)

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen Bjdpfx Aounaqvscysww • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2011, Operational condition. Bjdpfx Aoxdz Tdecyoww

Condition: excellent (used), The flagship of the series, the P8000 Cabinet models are the printers of choice when quiet operation and/or high-speed performance is paramount. Acoustically sealed enclosure produces less noise emissions than most laser printers Unmatched reliability and tolerance for a wide range of office and industrial environments Bwedpfx Aexaui Recyjw Available in 500, 1000, 1500 and 2000 LPM speeds P8000 Plus Models — P8C15 & P8C20 — deliver improved print quality and offer optional OpenPrint PDF & PostScript functionality and support for 802.1X and IPv6.

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Operating hours: 18,700 (as of 18.04.2023) Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) - Maximum build volume: approx. 650 × 750 × 550 mm - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: Bwsdpfoxam Ifex Acyow - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Year of construction: 2021, KONICA MINOLTA C4070 11/03/2021 Color: 1,500,000 (scalable) Bodjxdfghspfx Acyoww Black: 300,000 PF707 RU SD506 FS RIP KM

Condition: good (used), Year of construction: 2006, 8 color (7 mounted) Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm * Max. cup diameter: 130 mm * Max. cup height: 160mm Bedpfxjn Utdqo Acyoww This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, number of ink cartridges: 5, total length: 2,150 mm, total width: 1,660 mm, total height: 1,650 mm, type of input current: AC, input voltage: 230 V, overall weight: 1,000 kg, Maikuro DTG Printer Industrial DTG performance at an affordable price rate - Outstanding print quality - Low ink consumption - Low energy consumption - Intuitive software with touch screen operation - Long design life - Easy to connect to an automated workflow The smallest industrial DTG printer in the world - Large print area (max. 40 x 45 cm) - Long and reliable DTG production guaranteed Print heads: 8 RICOH Gen5 Print Tables: 2 Color channels: CMYK + 4 White Max. Print size: 40 x 45 cm; ~16 x 18 in Operating system: Linux OS RIP Software: Colorgate Interface: OPC-UA and REST Bjdpfeun Rqmex Acysww Ink type: Water-based pigment ink Sales unit: 10l canister Dimension (l x w x h): 215 x 166 x 165 cm / ~84 x 65 x 65 in Machine weight: 1000 kg; 2205 lbs Environmental conditions: Temperature 22-24°C; Humidity 50-80% non-condensing Electrical connections: 1 x 230 V + N + PE (1x 110 V + N + PE) - max. power input: 3kVA Printable Materials: Cotton, mixed fibers, ...

Condition: refurbished (used), For Sale: Refurbished EOS M290 – Ready to Use This fully inspected and refurbished EOS M290 is in excellent condition! This setup is ready to use and ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material Type: Metal • Compatible Materials: On Request • Build Volume: 250 x 250 x 325 mm • Laser Type: Yb-fiber laser; 1 x 400 W Consumables Featured We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is designed to perform at or above OEM powder levels, while significantly reducing costs. By switching to our materials, you will reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options to fit your needs, for long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality remanufactured EOS SLS and DMLS machines with comprehensive support services. We are the only provider to offer end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: • Expert maintenance: Installation, maintenance, repairs and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. Bwjdpfxswmq Dye Acysw • Unmatched support: From transportation to maintenance plans, we have it all covered. Trust IM3D for top performance, superior materials and the expertise to keep your SLS and DMLS production running smoothly. Please feel free to contact us for more information or questions!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Inkjet printer Breva IJet 2L - top printer for personalized printing! Are you looking for a compact, easy-to-use and reliable solution for high-quality printing of various materials and objects? Breva IJet 2L is the answer to your needs. This top-of-the-line printer made in Italy allows you to: - Print a wide range of materials - plastic, wood, glass, metal, leather, textiles, paper and cardboard - Print texts, images, logos, barcodes and QR codes in top quality - Easy and intuitive operation thanks to sophisticated software - Low operating costs and maintenance-free operation - Flexible settings for various applications and industries Breva IJet 2L is used for printing sporting goods (golf, tennis), glasses, cosmetics, wine, coffee, wedding and event accessories and in many other areas. The printer is in perfect condition. The price includes 4 cartridges with different colors. Specifications Printing technology Flatbed inkjet technology Number of print heads 1 print head/integral cartridge Ink type UV, solvent and water-based inks Supported materials Plastics, wood, glass, metals (including aluminum), leather, leatherette, textiles, paper and cardboard Print resolution Options: Draft, Normal, High quality Building area size: 390 x 330 mm Maximum print area: 150 x 170 mm Maximum object height: Standard 50 mm; in some versions up to 80 mm, with the possibility of extension to 300 mm  Interface USB Bwsdpfxev Sk Nbs Acyow Supported OS: Microsoft® Windows 10 Power supply 110 - 240 V, 50/60 Hz; max. 120 W Operating temperature 18 - 32 °C Relative humidity 50 - 70% Printer dimensions (W x D x H) 474 x 522 x 260 mm Printer weight 9.7 kg Software Breva Control Center, Scribus Supported file formats PDF, PNG, JPG, BMP, EPS, TIF

Condition: excellent (used), operating hours: 4,810 h, EOS EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) System including accessories: 3 x build boxes, docking station, multibox, water/water chiller. The system has been regularly serviced (last service performed in 07/2025). EOS unit Regularly maintained Service reports available Laser measurement protocols documented System has only processed PA11 (EOS PA1101) Operating hours: 4,810.9 h For sale is an EOS P 396 with PSW 3.8—a high-precision industrial system designed for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for series and prototype manufacturing. Base machine with control cabinet & control terminal Exchange frame with build platform Blade cassette II (blue) Software: Windows 7 Bwsdpfx Asw U R Dbocyjw Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20 °C water / 18 °C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. fill amount 520 g) Multibox is a typical EOS accessory for powder handling—for transport and interim storage of materials. Technical specifications: Laser and optics: Laser type: CO₂ laser Nominal power: 70 W Wavelength: 10.55 – 10.63 μm Laser class: 1 (closed)/ 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build area: 350 × 350 × 620 mm X-axis (coater): Travel range 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel range 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating systems: Process chamber heating: 3.0 kW, infrared twin-tube heater with pyrometer control Removal chamber heating: 1.6 kW, resistance heater coil with separate temperature monitoring Control & Operation: Process computer with Windows 7 operating system 15.1" TFT display, membrane keyboard & mouse Ethernet network connection Miscellaneous: Noise emission: < 70 dB(A) Electrical data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Nominal power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Mains fuse: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see photo) Base machine with control cabinet & control terminal Exchange frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Subject to changes and errors in technical data. All information is non-binding.) Please feel free to contact us by phone for further questions.

Condition: used, Inkjet printer with two print heads and automatic print head alignment and calibration. Additional title: dual-head inkjet printer Speed: 293 m/min 10 characters per inch; single-line Number of lines: 5 Bedpfxsw T Rwro Acyeww Character height: 10 mm depending on font Power: 120 W Current: 100-120 / 200-240 V Frequency: 50/60 Hz Length: 480 mm Width: 361 mm Height: 553 mm Weight: 22 kg Operation / Control: Membrane keyboard; 5.7-inch LCD display Features: Membrane keyboard; 5.7-inch LCD display; print heads with connecting hose

Year of construction: 2006, condition: good (used), 8 color Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm * Max. cup diameter: 130 mm * Max. cup height: 160mm Bwsdpfxen Utcto Acyew This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, number of ink cartridges: 6, total length: 1,700 mm, total width: 3,100 mm, total height: 1,300 mm, type of input current: three-phase, overall weight: 760 kg, working width: 1,600 mm, energy consumption: 4 kWh, product height (max.): 100 mm, table length: 1,000 mm, table width: 1,640 mm, Equipment: cooling unit, documentation/manual, Large Format Flatbed LED UV Printer The SIGNRACER 1610 is a reliable and versatile flatbed printer designed for industrial-grade production. Equipped with either Ricoh Gen.6 printheads, the printer offers excellent adhesion on various substrates, making it an ideal choice for printing on both dark and transparent surfaces in a single pass. Its LED UV curing system offers variable power levels and is air-cooled, providing a long lifespan and excellent performance. With its high-quality construction and advanced features, the SIGNRACER 1610 is a top choice for a range of industrial printing applications. It is ideal for producing high-quality graphics on both dark and transparent surfaces with its White and Gloss inks, in addition to CMYK process colors. Its ability to print on rigid and flexible materials such as PVC boards, Aludibond, PS, PP, Acrylat, PET-G, and Glass makes it perfect for printing signs, displays, and exhibition graphics. Ricoh's smaller drop print heads are suitable for special applications that require higher precision, such as watch faces and industrial components. Signracer also develops its own waveforms and inks, allowing for even higher print output and top quality at maximum printing speeds without compromise. This ensures a perfect match between our ink formulations and waveforms, especially in grayscale printing. Specifications Printhead - Ricoh Gen.6 Printhead Count - 4 Printbed Size - 1600 mm x 1000 mm Carriage Speed - Ricoh Gen.6: 1.26 m/s Vacuum Table - 2 Honeycomb zones with registration pins Dimensions (H x W x D) - 1300 mm x 3100 mm x 1700 mm Weight - 760 kg Energy Consumption - 4 kW Max. Media Width - 1640 mm Max. Print Width - 1600 mm Media Type - Rigid and flexible (PVC Boards, Aludibond, PS, PP, Acrylat, PET-G, Glass) Media Thickness - Maximum 100 mm Curing System - LED UV with variable power levels Bsdpfx Aounw Eqocyjww LED UV Lamp - 90 mm / 14 Watt/cm2 Color Configuration - CMYK + White + Varnish Ink Consumption - Ricoh Gen.6: 8 ml/m2 Draft (4 passes, 600x900 dpi) 26 m2/h Production (6 passes, 600x900 dpi) 20 m2/h Quality (9 pass, 600x900 dpi) 15 m2/h

Condition: good (used), Year of construction: 2009, functionality: fully functional, - Patented LIST Lina Scan technology for substrate alignment and inspection - Simplest program creation by full-surface substrate scanning Bwsdpfxswtqdge Acysw - Processing of large substrates – 550 x 500 mm - Detection of synthetic fiducial marks or any geometries - Diffuse and direct camera illumination for optimal substrate recognition and alignment - Two independent, pendulum-mounted print heads - Programmable print head with closed-loop control - Pneumatic squeegee clamping prevents loosening during production - Substrate fixation via Ovar-Top and Y-clamping, secure clamping even for interwoven substrates - Motorized transport width adjustment, programmable via software - Transport direction freely selectable - Flexible stencil holder for various sizes, no adapter needed; substrate support via magnetic pins and blocks - Desktop PC with Windows operating system, 17" TFT monitor. Machine programs and SPC data can be managed over the network - SPC data is graphically displayed to the operator and stored on the hard drive - AOI Automated Optical Inspection - Integrated print post-inspection with LIST - Very simple programming of the inspection area via substrate overview image on the monitor - Definition of areas with different sensitivity settings - Post-inspection of PCBs for pad print and bridging between pads - Stencil inspection for blockage of openings - Error display on the monitor for easy operator verification - Automatic cleaning cycle after detected stencil blockage - Inspection speed: 9100 mm (width: 260 mm x 35 mm/s) - SPC data acquisition - 2D inspection - Print format: min.: 80 x 50 mm, max.: 460 x 460 mm - Parallel process max.: 350 x 460 mm - Stencil size: min.: 450 x 450 mm, max.: 737 x 737 mm - PCB thickness: 0.5 – 6 mm - Squeegee pressure: 260 N - Cycle time: 11 s + print - Setup time < 3 min - Product changeover < 2 min - Transport height: 810 – 965 mm - Air supply: 5 – 6 bar - Temperature and humidity sensor - SMEMA inline interface - ESD kit

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: Table UV, Manufacturer: IMAXSCAN Model: 2512 Year of manufacture: 2020 Bwedpsxcpiqofx Acysw Technical condition: as is, on site Condition: in production Number of colours: 4 Maximum print length: 125 mm Maximum print width: 250 mm Description: This IMAXCAN UV LED flatbed printer is designed for high-quality prints with a print format of 250 x 125 cm. Equipped with a Ricoh Gen 5 printhead, it can print in white and varnish. It delivers flawless quality on a daily basis. Offer includes: - Delivery and installation possible by a specialized technician - Inks supplied (2 sets per colour) - Printhead cleaning device - User training Don't miss this opportunity to acquire a high-performance, ready-to-use machine.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, total length: 1,480 mm, total height: 2,040 mm, total width: 850 mm, overall weight: 360 kg, input voltage: 220 V, input current: 32 A, Mint condition XYZPrinting MfgPro230xS 3D printer from 2022. The device has hardly been used and is in excellent condition - perfect for anyone looking for a reliable and powerful 3D printer. Why the XYZPrinting MfgPro230xS? Outstanding print quality: With its precise printing technology and a resolution of up to 50 micrometers, the MfgPro230xS delivers impressive print results that meet the highest industrial standards. High printing speed: Save valuable time during production. The MfgPro230xS offers fast printing speed without compromising on quality. Large installation space: With a generous print volume of 230 x 230 x 230 mm, even larger projects are no problem. Ease of use: The simple operation and intuitive interface make this 3D printer easily accessible even for beginners. Reliability: Thanks to its robust design and high-quality components, the MfgPro230xS is extremely durable and reliable. With the XYZprinting MfgPro230 xS industrial 3D printing system, the most complex structures can be produced in one piece and without support structures using selective laser sintering in your workshop. Developed for professional use as well as for use at institutes and universities. Bsdpfx Aot H I Tvecyeww Accessories: Sinterit FZ138 PHS Station Sinterit FZ101 ATEX Vacuum Cleaner 230V Sinterit Sandblaster SLS N2 Generator

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Bwodpfx Acohzgtujyew Width: 1000mm Height: 1900mm Weight: about 100kg

Year of construction: 2006, condition: good (used), 8 color (7 mounted) Polytype BDM 691 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm * Max. cup diameter: 150 mm * Max. cup height: 160mm Bedpfx Acen Ut Hreyeww This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Year of construction: 2015, condition: excellent (used), Dip-Tech GlassJet AR6000, Digital Printer for Glass, year 2015 Print resolution: 360 dpi (real) DIP SPECTRUM INK: Ceramic ink for both tempered and fired annealed glass Ink colors: Black, white, etch imitation, and various spot colors Bsdpfx Acjrhkp Eeyjww There are currently 7 print heads in operation: 4 black and 3 white. They enable the printing of black and white. Maximum glass size: 3300 x 6000 mm Minimum glass size: 400 x 400 mm Glass thickness: 2 – 19 mm Operators: 1 Inline functions: Continuous conveyor Overall dimensions: 6071 x 7746 x 1600 mm (width x length x height) Image format: All common graphic formats including: PDF, PS, EPS, Tiff, BMP and JPEG Ambient temperature: 18 – 25 C Installed power: 400 VAC x 16A, 3 Ph. 50/60Hz In very good condition. Dismantled in February 2024. Available: NOW

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Bwsdpfx Aeu Ebv Ascyew Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.

Condition: excellent (used), The price per piece is valid for orders of a minimum of 10 pieces. used printer with toner Bwodpfx Aoxbiagjcyew

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1904P201, Year of construction: 2019, total length: 1,950 mm, total height: 1,790 mm, total width: 2,430 mm, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, power: 5.8 kW (7.89 HP), For sale is a BigRep-PRO, which unfortunately doesn't receive the attention and use it deserves and has become too large for our purposes. Bwodpfxjv In Hco Acyow We purchased the device directly from the manufacturer, and everything has been serviced and maintained by specialists from BigRep GmbH, who took care of the machine so that we can hand it over with peace of mind. The only issue, as you can see in the pictures, is the pane on the left door, which we had to replace because the old one broke accidentally. However, it doesn't affect its functionality or anything else, just a cosmetic flaw. However, the entire device is still packaged in the manufacturer's film, which, as you can clearly see, is practically factory-made. Depending on our agreement, we can also include some filament (which is large for approximately 15 rolls). The device can be viewed and inspected on-site - appointments can be arranged. If you have any further questions, please contact us directly.

Condition: ready for operation (used), Year of construction: 2011, Main Drive Number of axis 3 This 3-axis CONCEPT LASER M3 Linear was manufactured in 2011. It features a robust power supply with a total consumption of 7.4kW, supporting a laser system, IT, and control voltage components. Essential for operations requiring compressed air and nitrogen, it ensures a steady flow and pressure. Ideal for precision metal 3D printing. Contact us for more information about this machine. Bwedpjw Saz Rofx Acyew Application Types 3D Printing

Condition: good (used), Year of construction: 2006, 8 color (7 mounted) Polytype BDM 691 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm Bwedpfxsn Ut Hvs Acyjw * Max. cup diameter: 150 mm * Max. cup height: 160mm This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)