Used Packaging Lines for sale (20,683)

Year of construction: 2016, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards Fodpfx Asyw Tmlelbsgg - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Bobp Ergeyw Tmlocyodf 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: used, machine/vehicle number: LC608, Used Glass bottling line for ciders 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is configured for crown‑capped beverage production and industrial packaging. It combines inspection, rinsing, filling, labeling, packaging, and end-of-line palletizing into a robust second hand solution for beverage production.Depalletizer: Kettner Pressant Universal (1N), 5 layers/minEmpty Bottle Inspector (EBI): Krones Linatronic 731 M2, 700 bottles/minRinsing Machine: CBI JetMatic, 72 heads, 670 bottles/minFilling/Crowning Monoblock: O & H Hansa Ref C2932B 03, 600–660 bottles/min, 80/14 headsBottle Inspector 1: Heuft Spectrum TXBottle Warmer: CBI MCC 2000Labeling Machine: Krones (Renner) Topmatic Type 071, 850 bottles/minBottle Inspector 2: Heuft Spectrum TXShrink Wrapper (Over‑wrapper): SMI SK 800F, 160 packs/minWrap Around Packer: SMI WP 450, 45 cases/minCase Divider: CBIPalletizer: Berchi Dinamatic PTF/2Pallet Wrapper: Robopac Helix HS 30, 30 pallets/hourPallet Coder: Logopak LOGOConveyors + Controls: CBI bottle conveyors and controls; CBI case conveyors; CBI pallet conveyorsCase Scales: John White & Son Cartomat 2Carton Coder: Videojet Excel 100Bottle Dryers/Blowers: Jetair Jet‑2; Sonic 150Chillers: Geoclima 2 x TMA 2A450A EC‑34Container type: Designed for Glass bottle handlingLine speed (bottling): up to 850 bottles/min (limited by downstream configuration)Advanced Automation & Control SystemsThe line integrates centralized controls across depalletizing, inspection, rinsing, filling, labeling, and packaging. Automation-ready subsystems support stable speeds from 160 packs/min on the shrink wrapper to 850 bottles/min on labeling, with efficient changeovers between operations. Safety interlocks, emergency stops, and guarding around rotating and motion systems enhance operator protection and reliable beverage production.Coordinated conveyor logic and accumulation for smooth product flowAutomated inspection (EBI and post‑label checks) for quality assuranceControlled thermal management via bottle warmer for condensation mitigationPallet coding and carton coding integrated for end‑of‑line traceabilityProduction Line Integration CapabilitiesThis used bottling line is engineered for inline operation from depalletizer through pallet wrapper, with modular stations for easy reconfiguration. The conveyor and control system by CBI provides balanced buffering between processes to maintain bottle integrity and consistent throughput. Suitable for a range of crown‑capped glass bottle applications in industrial packaging and beverage production.In... Fgodpfx Aoy Ef Ttjlbsg

Condition: used, Used Bottling Line HDPE for dairy products 7200 bph Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition. Container Type and Format Flexibility of the Used Bottling Line HDPE Fgodpewa Tqijfx Albjg The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors. Bottle Feeding and Preparation Section At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages. Weight-Based Filling and Snap-On Capping The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time. Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Fgodpfx Alezn Ipysbsg Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Condition: used, machine/vehicle number: LC650, Used Sidel bottling line for still - sparking water - 14400 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET bottle handling and optimized for water production, covering both carbonated and still products. The system combines isobaric filling technology with robust end-of-line packaging, offering reliable performance for medium-speed beverage production.Production speed (maximum): 14,400 bph with 0.5LAdditional speeds: 9,000 bph with 1.5L still water; 7,000 bph with 1.5L carbonated waterBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottlesContainers: Designed for PET bottles with air conveyors for empty bottle transportFiller technology: Isobaric; neck 26 mmLabeling: KHS Innoket 21 N (2002) and SACMI OPERA (2011)Shrink wrapper: SMI LSK45 T (2001)Pallet wrapper: TOSA 125 (1995)Chiller: M.T.A. TAEevo TECH 121 (2025)Ancillary equipment: SIAD Macchine Impianti unit (1999)Electrical highlights (components): SMI LSK45 T: 400 V, 50 Hz, 22 kW, 37 A; M.T.A. chiller: 400 V, 50 Hz, 20 kW, 35 A, IP54Advanced Automation & Control SystemsThe line benefits from upgraded controls to ensure repeatable operation and ease of use. Air conveyors for empty bottles and belt conveyors up to the shrink wrapper have been overhauled and equipped with new electrical panels. The capper has also been overhauled with a new electrical panel, supporting stable operation and format reliability.Overhauled conveyor controls with new electrical panelsCapper overhauled in 2012 with new electrical panelCE-marked components across key stationsFormat pre-sets on the labeler for multiple bottle sizesProduction Line Integration CapabilitiesEngineered for smooth in-line operation, this second hand bottling line integrates air conveyors for lightweight PET handling, precision labeling, and robust end-of-line packaging. Quick changeovers are supported by pre-configured labeling formats, enabling efficient switches between common water bottle sizes.Inline configuration from bottle handling through packagingAir conveyors for empty bottles and belt conveyors up to shrink-wrapperLabeling line-up: KHS Innoket 21 N and SACMI OPERA for multi-format flexibilityEnd-of-line shrink wrapping with SMI LSK45 T and pallet stabilization by TOSA 125Bottle size range: 0.5L, 1.0L, 1.5LSuitable for water production (still and carbonated)Machine Condition & Maintenance HistoryThe line includes several components that have undergone maintenance and overhauls aimed at improving reliability and uptime. Air and belt conveyors up to the shrink-wrapper have been revised, with new chains and new electrical panels installed. The capper was overhauled in 2012 and fitted with a new electrical panel. The KHS Innoket 21 N labeler is set up for multiple formats, streamlining changeovers.Conveyors overhauled; new chai... Fgsdpfx Aezg In Telbeg

Condition: refurbished (used), Year of construction: 2007, The PDFD joining line, in its single-milling version, consists of two main units: a milling and tenoning machine, DFC 60M (where the tenons on the strip ends are machined), and a length joining press, PHSL, where the elements are joined into a strip with a length of up to 6.6 meters. Input package width for the milling and tenoning machine – 650 mm Width of glued elements – 30 ÷ 155 mm Length of glued elements – 170 ÷ 900 mm Thickness of glued elements – 20 ÷ 70 mm Compressed air consumption – 18 m³/h Fgodpfx Alsw Hrm Nobjg Working performance – cycles/min – approx. 2 (strip 6600) Length of the glued element – up to 5500 mm The machine is in excellent technical condition!

Condition: used, Year of construction: 2018, machine/vehicle number: LC655, Used COMAC can filling line for beer 6000 CPHTechnical Specifications & Performance DataThis complete can bottling line engineered around a filling and seaming monoblock is designed for efficient beverage production in industrial packaging environments. Optimized for carbonated beer, it provides reliable performance for standard can formats with precise isobaric filling and robust quality control. As a used bottling line, it offers second hand value with professional features suitable for modern beverage production.Product: Carbonated beerFilling temperature: 2–4°CCO₂ quantity: up to 5.5 g/LProduction speed (reference): 6,000 cph on 0.33L; 5,500 cph on 0.44LContainer types: Two-piece aluminum cans with SOTCan formats: Compatible with 0.33L and 0.44LDiameter: 66 mmClosure: 202 can endRequired product pressure: 3–4 barRequired water pressure: 3–4 barRequired air pressure: 6 barRequired CO₂ pressure: 6–8 barFilling monoblock: ISO 14-2 (14 isobaric valves, 2 seaming chucks)Depalletizer pallet sizes: 1,120 × 1,300 mm (standard), 1,120 × 1,420 mm (optional)Depalletizer discharge height: 3,370 mm; max pallet height 2,813 mmRinser tunnel length: 2,380 mm; ionized air with HEPA filtration (99.97% at 0.3 µm)Automation: Siemens PLCs and HMI across key stationsAdvanced Automation & Control SystemsThe line integrates modern automation with operator-friendly HMIs for streamlined control and repeatable changeovers. Electrical and pneumatic systems are built for beverage production reliability, enabling precise handling of carbonated products.Control architecture: Siemens PLC Logo 7/2 on depalletizer; Siemens S7-1200 PLC with Weintek 7" touch screen on the labeling machine; Siemens touch screen and PLC on the monoblockDrive technology: SEW 4 kW motor for seaming rotation; frequency converters on key drivesAutomated height adjustment: Brushless motorized recipe-based can size changes via HMISensors & inspection: Photoelectric/inductive lid presence, X-ray fill level (min/max), transparent label photocellSafety: Stainless steel guards with interlocks, wire-mesh fencing, emergency protections, IP55 stainless enclosure on the inkjet coderClean operation: Ionized air cleaning with HEPA filter; undercover CO₂ injection and bubble breaker; dummy cans for CIP (up to 80°C)Production Line Integration CapabilitiesDesigned as a coherent packaging machinery set, this used bottling line supports inline operation from depalletizing through filling, inspection, coding, labeling, and discharge. Format changes between 0.33L and 0.44L are rapid thanks to automated adjustments and dedicated change parts.... Fgjdpfx Ajzmgccelbeg

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass filling line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements ... Fgjdpfjy Szb Hjx Albjg

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4DOUG52347, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 261 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, Professional Production Set of Six JUKI Industrial Sewing Machines from the MASI JEANS Factory This lot consists of six JUKI DDL Series industrial single-needle lockstitch sewing machines, removed directly from the production lines of the former MASI JEANS factory in Estonia. The JUKI DDL-8500 and DDL-8700 Series are among the world's most widely used industrial sewing machines, renowned for their reliability, smooth operation and consistent stitch quality. Designed for continuous production environments, they are an excellent choice for garment manufacturers seeking dependable, high-speed sewing equipment. Because all machines operated in the same factory, this matched production set offers consistent performance, common spare parts, simplified maintenance and identical operating principles, making it ideal for expanding an existing production line or establishing a new sewing department. Bundle Contents Machine 1 Model: JUKI DDL-8700-7 Internal Reference: 6A Machine 2 Model: JUKI DDL-8700-7 Internal Reference: 109A-7078 Machine 3 Model: JUKI DDL-8500 Year: 2002 Internal Reference: 113A-7101 Machine 4 Model: JUKI DDL-8500-7 Year: 2001 Internal Reference: 26B-7049 Machine 5 Model: JUKI DDL-8700-7 Internal Reference: 27B-7088 Machine 6 Model: JUKI DDL-8700-7 Year: 2002 Internal Reference: 28B-7090 Technical Specifications Manufacturer: JUKI Corporation Model Series: DDL-8500 / DDL-8700 Machine Type: Industrial Single-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Fully Automatic Lubrication System Complete Industrial Workstations Heavy-Duty Steel Stands Five machines equipped with the JUKI "-7" electronic automation package featuring: • Automatic Thread Trimming • Automatic Backtacking • Automatic Needle Positioning Key Features • Factory-matched production set • Six professional JUKI industrial sewing machines • High-speed, reliable industrial performance • Excellent stitch quality for continuous production • Common spare parts and maintenance procedures • Complete workstations ready for installation • Proven Japanese engineering Applications • General garment manufacturing • Denim and jeans production • Workwear and uniforms • Shirts and sportswear Fgjdpfx Aloznlbyobog • Medium-weight woven fabrics • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained operational until the scheduled closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all associated costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, machine/vehicle number: LC521, Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. Fodpfx Alovgu Tyebogg SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC monoblock unifies three critical bottling functions into a single system. First, the PROCOMAC GRIPSTAR 2R rinser cleans bottles thoroughly, preparing them for the filling process. Then, the PROCOMAC FILLSTAR PET filler quickly and accurately fills bottles with natural or carbonated mineral water. Finally, the PROCOMAC 10-head PICK & PLACE capper applies caps securely and efficiently. Moreover, the saturator and CIP (Clean-In-Place) system maintain hygiene standards and streamline maintenance operations. These additional components not only enhance the monoblock’s efficiency but also ensure reliable performance during production. Transport and Packaging Systems The PELACCI P.13.8.5 cap elevator consistently supplies caps to the system without interruptions. In addition, the PE ROLLMATIC CI 540 12T labeler applies labels accurately to bottles of different formats. Subsequently, the ZAMBELLI LFT 50 shrink wrapper quickly packages bottles into bundles, while the COMAG H 55/1 handle applicator attaches handles to bundles for easier transport. Furthermore, the LEVATI ARTIS palletizer organizes bundles onto pallets with precision. Similarly, the ROBOPAC HELIX HS 30 pallet wrapper wraps the load securely to protect it during transportation. Lastly, the EIDOS labeling system prints and applies labels directly on the production line, allowing for full customization, which ensures adaptability to various production requirements. Conveyor Belts for Optimal Flow The conveyor belt system facilitates efficient material flow across the production phases. Specifically, air conveyors move bottles swiftly, while dedicated belts transport bundles and pallets seamlessly between sections of the line. Consequently, these systems maintain a continuous and smooth workflow, which significantly reduces production downtime. Current Status and Availability This Used bottling line PROCOMAC for still and sparkling water up to 12000 bph operates efficiently and will remain in use until April 2025, when it will be dismantled and replaced. Therefore, we encourage interested buyers to view the line in operation before dismantling to evaluate its performance and condition. Ultimately, this complete and integrated solution delivers reliable and high-performing bottling capabilities for industrial water production.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Manufacturer - ILPRA S.p.A. Model - Formpack F0 TMF Long Version. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Fedpewp Ac Hsfx Albjgg Previously used for packing various meat products. Last run in May 2025.

Condition: excellent (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 2021-1504-QN, High-end metal separator for inspecting bulk materials in free fall Material: stainless steel 304 Surface: sandblasted Sensing tube material: PE, anti-static, food grade Rejector: single flap type RH Protection rating: IP66 Electronics assembly: detached Control electronics cable length: 3 m Nominal width: 150 mm Orientation: vertical, top to bottom Power supply: 100-240VAC 50-60Hz LNPE - Without power cable Fodpfx Aezvwlmslbogg Pressurized air supply: 6-10 bar Expected sensitivity: FE: 0.4 mm NE / Al: approx. 0.4 to 0.56 mm Stainless steel: approx. 0.4 to 0.72 mm Electronics outside ATEX Zone Inside: Zone 20 within metal separator (pipe) = II 1 D Ex h IIIC T135°C Da Outside: Zone 22 surrounding metal separator = II 3 D Ex tc IIIC T135°C Dc IP65 QUICKTRON 07 RH metal separators are used for inspecting powders and granules in free-fall lines. They are available in nominal widths up to 300 mm and can therefore cover all application areas, from the laboratory to truck loading. Their hygienic design and easy cleaning prevent cross-contamination between product batches. Depending on the requirements, they can increase process safety or fulfill the task of outgoing goods inspection. Mesutronic metal detectors use state-of-the-art technology to protect your production, your reputation, and your customers from damage caused by metallic foreign objects. Digital signal processing, combined with innovative evaluation methods, comprehensive self-monitoring, and ease of operation, ensure the optimal function of the system and the successful completion of all types of audits. The devices are complemented by an extensive range of accessories and variants, from multi-frequency technologies to test bodies and material certificates. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or in the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: used, machine/vehicle number: LC426, Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Fsdpjvgvwmefx Albjgg Quality Control of the Used Bottling Line KRONES Maintaining product quality is paramount in any bottling operation. Therefore, the 1999 KRONES CHECKMAT inspector plays a pivotal role in this regard in the Complete Bottling Line KRONES. With advanced functionalities encompassing not only level control but also meticulous label inspection, it ensures that every product meets the desired standards. Furthermore, the 2000 ACI TA20 2 AE bottle dryer guarantees that bottles are impeccably prepared for subsequent labeling and packaging stages, effectively eliminating any potential issues that may arise from moisture. Labeling and Packaging Efficient labeling and packaging are essential components of the KRONES bottling line. Consequently, the 1999 KRONES STARTMATIC K-080-669 excels in these areas. With precise label application capabilities, coupled with the ability to print directly onto glass bottles, it not only streamlines operations but also elevates brand presentation in the Used bottling line KRONES for glass bottles up to 20000 bph. Complementing this is the 1999 SMI SMI/7507 case packer and the 1997 FRANPACK Typ 121971214 pallet wrapper, ensuring that products are securely packaged and ready for distribution. Operational Status and Specifications The KRONES bottling line is in flawless working condition, and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the line promises to enhance operational efficiency while maintaining product quality. Specifically designed for glass containers and primarily catering to beer production, it guarantees precise and consistent fills, ultimately resulting in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a sound investment for businesses seeking to optimize their bottling operations. With its robust construction, cutting-edge features, and proven track record, it is poised to deliver exceptional performance and elevate production standards to new heights.

Condition: used, Used end of line TMG up to 1200 box-hour Case Erector with Hot Glue Sealing Firstly, the TMG case erector features hot glue bottom sealing. It includes, notably, a Nordson glue heater. This allows for the formation and sealing of various carton sizes. Additionally, the machine has a painted iron frame. It also comes with safety protections. Importantly, it is capable of producing about 1200 cartons per hour. This equipment complies with CE standards as of 2018 and is provided with a manual. Consequently, this offers an efficient packaging solution. Case Packer with Mechanical Movement Moreover, the TMG case packer has a mechanical movement on axes. It’s designed for precision and adaptability. It can have, for example, two bottle grab heads (6+6) or one with 12 heads. This setup accommodates different bottle diameters. Furthermore, the entry bench is made from stainless steel, indicating a robust machine. With a rate of about 480 cycles per hour and equipped with safety protections, it adheres to 2018’s CE regulations. Fgodsvgt N Topfx Albjg Case Sealer for Efficient Sealing of the End of line TMG Furthermore, the TMG case sealer ensures accurate top sealing with hot glue. It includes an automatic carton separator. A pneumatic piston operates the rear flap closure. It allows for manual adjustments for various carton sizes. Equally important, it achieves a rate of 1200 cartons per hour. This machine emphasizes sealing efficiency and reliability. With lateral safety protections, it meets the 2018 CE standards and is also provided with a manual, presenting an optimal solution for end-of-line operations. Conclusion of the End of line TMG Lastly, choosing “Used end of line TMG up to 1200 box-hour” machinery is strategic for enhancing packaging efficiency. Furthermore, the integration of a case erector, packer, and sealer meets not only safety standards but also offers operational flexibility. These machines are ideal for enterprises aiming to boost productivity and uphold high-quality benchmarks. In summary, TMG’s technology features comprehensive safety and operational efficiency, effectively addressing the demands of the bottling industry and ensuring top performance and reliability over the long term.

Condition: used, Complete Refrigerator Production Line – CANNON & NORTOOL (Sheet Metal, PU Foaming, Assembly, Charging & Packaging), used machine Fully integrated, high-capacity production line capable of manufacturing complete domestic and commercial refrigerators/freezers from raw sheet metal to final packaged products. Key Stations of the Production Line: - Sheet Metal Processing Station Fgjdezzkd Tepfx Albog - Thermoforming (Vacuum Forming) Unit: CANNON FORMA vacuum forming machine (for ABS/HIPS inner liners and door liners). - Polyurethane (PU) Foaming Line: NORTOOL Oy cabinet and door foaming fixtures with high-pressure PU injection system. - Main Assembly Conveyor Line: Integrated assembly line for components, doors, and cooling circuits. - Evacuation & Gas Charging Station: High-vacuum pumping station and automatic refrigerant gas charging equipment. - End-of-Line Testing & Packaging: Electrical safety testing, leak detection, and automated packaging unit. Technical Details & Condition: Manufacturers: CANNON Group, NORTOOL Oy, and integrated custom machinery manufacturers. Condition: Used Inspection: Available upon prior arrangement

Condition: used, Year of construction: 1993, Fabricant : PRB / Marchesini Group Model : Pocket 3 Year : 1993 Type : Case packer Application: packing cases into boxes Manufacturer data: Case features: side a: min. 200 - max. 550 mm side b: min. 120 - max. 330 mm side c: min. 130 - max. 350 mm Fodox R Dapepfx Albogg Case features: L dimension: min. 20 - max. 550 mm l dimension: min. 10 - max. 130 mm height: min. 75 - max. 200 mm Tape characteristics: External diameter max: 220 mm Chuck diameter: 77mm Band width: 30 - 60 mm Weight : 1350 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 30 kg, arm reach: 650 mm, pivoting range: 360 °, teach pendant manufacturer: Fanuc, Fanuc SR6IA-30P-C-CENR Robot complete with Controller. 8+ units available from October 2026 Robots were installed in an IMA line that was created for a special project but never commissioned. So even though the robots have been installed in the line, they were never commissioned prior to the special project being terminated. Lines are still in their original crate from IMA. Fjdpfjzzplcox Albogg FANUC SR-6iA - Type: SCARA - Axes: 4 — J1, J2, J3, J4 - Payload: 6 kg - Horizontal reach: 650 mm - J3 vertical stroke: 210 mm - J1 range: ±148° - J2 range: ±150° - J4: ±360° - Repeatability: approximately ±0.01 mm for J1/J2/J3 - Robot weight: 30 kg - Typical applications: pick & place, assembly, inspection and packaging - Controller: R-30iB Plus for the current configuration.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Weigher: Gentle and Precise Filling Technology Our linear weigher is the ideal solution for simple and accurate dosing and filling of products. It seamlessly combines precision with gentle handling. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods, even with sensitive items. Flexible and Efficient Operating Principle The core of our technology is a simple yet highly effective operating principle: Products are conveyed via linear belts or vibratory feeders and precisely dosed into the weighing bins. Features: - Easy operation and cleaning - Convenient control via color touch screen - Memory for different weighing recipes - Precise weighing results through three-stage weighing (coarse / medium / fine), each stage individually programmable - Tool-free format change - Intuitive design enables quick changeover and easy cleaning - Gentle handling: minimal drop height protects delicate and fragile products - Versatile: flexible use in both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made from 304 stainless steel, easy to clean - Compact design and durable construction save space and reduce maintenance effort With our linear weigher, you receive a reliable, precise, and hygienic solution that enhances the efficiency of your production processes. Fgjdpfx Ajyazywslbsg Technical data - Weighing range: 20g to 2,000g - Accuracy: up to 1g, depending on product - 4.5-liter weighing bin - Max. speed: 30 weighings/minute (double-head weigher) - Material: stainless steel 304 (V4A / 316 on request) - Connection: 220V / 50Hz / 6A

Condition: used, Year of construction: 1994, operating hours: 34,000 h, machine/vehicle number: LC613, Used line tetra pak TBA 8 - 1L slim 6000 PPHTechnical Specifications & Performance DataThis second hand complete bottling line is engineered for industrial packaging of aseptic carton containers, centered on the renowned Tetra Brik Aseptic platform. Designed for beverage production environments that demand hygiene and reliability, it provides end-to-end handling from aseptic filling through cap application to final case packing. As a used bottling line, it offers a cost-effective route to expand capacity while maintaining quality standards.Main filler: Tetra Brik Packaging Systems AB TBA 8 / 1000 SLIMConstruction year (main filler): 1994Package format: 1.0L Slim cartonSpeed: 6000 Packs/hour (PPH) Auxiliary equipment: Tetra Pak Cap Applicator 21; Tetra Pak Cardboard Packer 70Line application: Aseptic carton filling with downstream capping and case packingCompliance: CE markedAdvanced Automation & Control SystemsThe line leverages factory-integrated automation from the Tetra Brik Aseptic platform, designed for consistent performance and operator-friendly control. Safety interlocks and guarded access points support secure operation during beverage production. Standardized control architecture streamlines start-up, shutdown, and recipe management for the 1.0L Slim carton format.Centralized operator interface for coordinated filler, capper, and packer functionsAutomated sequences for aseptic filling and downstream handlingSafety circuits and emergency-stop devices for protected operationDesigned to support quick diagnostics and routine maintenance tasksProduction Line Integration CapabilitiesThis used bottling line integrates aseptic filling with cap application and case packing to create a cohesive industrial packaging solution. It is suitable for beverage production environments requiring carton handling and end-of-line packing. The cap applicator 21 and cardboard packer 70 are configured to work inline with the TBA 8 / 1000 SLIM, minimizing transfers and ensuring stable throughput.Inline configuration from filler to cap applicator to case packerOptimized for 1.0L Slim carton containersCompatible with standard conveyor and accumulation layoutsDesigned for inline operation; can be adapted to existing conveyor systemsMachine Condition & Maintenance HistoryOffered as a second hand, complete bottling line in working condition and ready for operation. It presents an efficient option for facilities seeking a pre-owned aseptic carton solution without the lead times typical of new equipment. Routine recommissioning and line integration services are recommended according to site standards.Operational status: Ready for operationCommercial status: Used/second hand industrial packaging lineOperational Performance & VersatilityThe TBA 8 / 1000 SLIM is a proven aseptic filler for carton containers, engineered for stable, hygienic beverage production. Downstream, the cap applicator 21 ensures accurate closure application, while the ... Fodpfx Aleyvpt Esbogg

Condition: used, Used Bottling Lines for edible oil 6000 bph Fodpowlt Dgefx Albsgg General Configuration of the Bottling Line The Used Bottling Lines for edible oil 6000 bph line processes edible oil in 1-liter PET bottles, operating at a nominal speed of 6000 bottles per hour. The configuration includes equipment from multiple manufacturers, integrated to ensure continuous operation and reliability in filling, labeling, packaging, and palletizing. Operators correctly shut down the entire system in December 2022. At present, the machines are dismantled and stored in suitable conditions. Consequently, this line is immediately available for relocation and reuse. Overall, the structure represents a compact yet complete solution for medium-scale production. Container Formation: KOSME Blow Molding Machines The Used Bottling Lines for edible oil 6000 bph line includes two blow molding machines from KOSME, model KSB3000, year 2001. Each unit works with a preform box and an automatic transport system that feeds the blower. As a result, the system supports on-site bottle production. Therefore, it reduces logistics costs and improves plastic material handling. In addition, the dual-machine setup enhances production continuity and minimizes downtime. Cooling System: MTA Chiller and Air Conveyors An MTA chiller, model TAE 051, year 2000, cools the molds in the blow molding machines. Moreover, KOSME air conveyors, model L2000, year 1999, made of AISI 304 stainless steel, transfer the blown bottles to the filling monoblock. Notably, the system includes electrical cabinets with integrated PLCs and built-in air filters. Thus, it ensures effective airflow control and maintains consistent air quality. From a technical standpoint, this contributes to long-term reliability and hygienic conditions. Filling Monoblock: ICS RVP-12/ZS-3N The ICS filling monoblock, model RVP-12/ZS-3N, year 1995, serves as the core of the Used Bottling Lines for edible oil 6000 bph. This machine doses edible oil with precision, ensuring product integrity and consistent fill volumes. Furthermore, the system synchronizes with upstream and downstream units. Consequently, it enables stable operation even under variable load conditions. Likewise, its mechanical construction supports easy maintenance and spare part replacement. Labeling Machine: ICS with Cold Glue An ICS labeling machine, model ERG-6/2/2, year 1995, applies paper labels using cold glue. Specifically, the machine ensures proper adhesion on PET containers. Additionally, it supports the 1-liter format used throughout the line. In practice, this technology remains widely adopted for edible oil packaging. Therefore, the labeling unit integrates efficiently into the overall production layout. To sum up, it provides a cost-effective solution without compromising performance. Internal Handling and Packaging ICS conveyor belts, installed in 1995, connect all key stations. Subsequently, the line transitions to the packaging phase.

Condition: used, machine/vehicle number: LC618, Used Automatic 18.9L bottling line 500 BPHTechnical Specifications & Performance DataThis automatic bottling line is engineered specifically for large 18.9L bottles, delivering dependable performance for washing, disinfecting, filling, and capping. Designed as a complete, synchronized system, it provides consistent throughput and accurate operations across all stages.Production speed: 500 bottles per hourTotal output: 9450 liters per hourBottle format: 18.9LProcess stations: Washing, disinfecting, filling, cappingFilling heads: 6Operation: Fully automatic lineApplication: Ideal for high-volume, large-format bottle handlingAdvanced Automation & Control SystemsThe line operates with automated sequencing across each station to maintain stable throughput and reduce operator intervention. Controls support straightforward start/stop and changeover procedures to keep change times minimal and maximize uptime.Automatic cycle control for synchronized washing, disinfecting, filling, and cappingCentralized operator interface for status monitoring and adjustmentsSensors and interlocks to help ensure reliable bottle handling and cycle completionQuick setup for 18.9L format with consistent, repeatable settingsProduction Line Integration CapabilitiesThe system is designed to function as a complete line for 18.9L bottles and can be integrated with upstream and downstream handling equipment. Its layout supports straightforward connection to conveyors, accumulation, and packaging stations where required.Inline operation as a complete bottling unit for large-format containersCompatible with standard conveyor interfaces for infeed and dischargeOptimized handling for 18.9L bottles with stable transfer between stationsSuitable for beverage production where large bottles are requiredMachine Condition & Maintenance HistoryThe line has been barely used, limited to trial run operation only. It is fully functional, ready for testing, and in production-ready mode. This minimal use profile provides a strong opportunity for those seeking a second hand, used bottling line with near-new wear characteristics.Condition: Barely used (trial run only)Status: Fully functional and ready for testingOperational readiness: Production-ready configurationOperational Performance & VersatilityPurpose-built for 18.9L bottles, the system provides reliable cycle execution and steady output. The six-head filling section balances throughput with filling control appropriate for large volumes. Pre-filling treatment via washing and disinfecting helps support product quality within beverage production and industrial packaging workflows.Consistent performance for large-format bottle fillingIntegrated pre-treatment (wash and disinfect) prior to fillingAutomated capping aligned with 18.9L bottle handlingSuitable for beverage production environments requiring large containers Fgodpjy Ai Hfofx Albeg

Year of construction: 2008, condition: used, functionality: fully functional, Blažek ABM-5 D stick packaging line for sale – 3 machines available For sale are three fully functional Blažek ABM-5 D stick packaging lines, including downstream collection stations. These systems were specifically developed for the precise filling of fine-grained sugar and feature volumetric dosing for granules and crystalline raw materials. Thanks to their robust design and reliable technology, the machines are also suitable for numerous other free-flowing products with comparable properties. Technical specifications: Manufacturer: Blažek Type: ABM-5 D Dosing system: Volumetric dosing Suitable for: Fine-grained sugar Granules Crystalline raw materials Current configuration: 5 sticks per cycle Includes downstream collection station Machines are fully functional Available systems: Year of manufacture 2008 Year of manufacture 2008 Year of manufacture 2016 Condition Fsdpfx Aszvww Nslbogg All systems are in functional condition. A demonstration in test operation on-site is possible by arrangement, so that interested parties can be convinced of the function and performance of the machine. Inspection An inspection of the systems is possible by appointment. We will gladly provide further technical information, pictures, or a test run video. If you are interested, we look forward to hearing from you.

Condition: used, Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Fsdpfx Aowr T E Delbegg Technical conclusion In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.  

Condition: used, Year of construction: 2022, machine/vehicle number: LC653, Used Micro can CL10 filling line 4000 Cans per hourTechnical Specifications & Performance DataThis complete automatic canning line is a compact, engineered for efficient beverage production in aluminum cans. Manufactured by Micro Can, it integrates key bottling equipment into a cohesive, space-efficient unit suitable for industrial packaging environments. As a second hand, used bottling line, it offers proven reliability and excellent value for expanding or optimizing production.Line type: Complete automatic canning lineManufacturer: Micro CanMain module: Micro Can CL10 filler/seamerRated output: 4,000 cans per hourContainers: Aluminum cansFormats: Standard 0.33ml and 0.44mlFilling type: gravityAdvanced Automation & Control SystemsThe line is designed for streamlined operation with integrated control and coordinated infeed/outfeed logic between the depalletizer, filler/seamer, and labeling machine. Quick setup and simple recipe changes support efficient format adjustments. Operator-friendly controls, interlocked guards, and emergency stops provide safe, intuitive handling during routine operation and maintenance. The configuration minimizes interface risks and ensures stable synchronization across the complete packaging process.Production Line Integration CapabilitiesOptimized for inline operation, this second hand canning line connects upstream depalletizing to downstream labeling with harmonized conveyor handling. It is suitable for beverage production expansions, pilot facilities, or as a dedicated canning cell within a larger packaging plant. Designed for aluminum cans, it can be interfaced with upstream processing and downstream secondary packaging equipment as needed.Machine TypeManufacturer/ModelYearDepalletizerFilling MonoblockMicro Can CL10Labeling MachineWrap-around labellerMachine Condition & Maintenance HistoryThe line is offered as a complete, ready-to-operate unit. As a used bottling line, it has been configured for immediate deployment in industrial packaging environments, subject to standard site preparation and utilities. Overall condition is consistent with a professionally integrated second hand canning line built for dependable daily operation.Operational Performance & VersatilityWith a rated output of 4,000 cans per hour, the Micro Can CL10 filler/seamer delivers stable filling and precise seaming performance. The wrap-around labeling machine supports continuous production with consistent label application, and the depal... Fgodpozkhtqefx Albog

Condition: used, Year of construction: 2005, operating hours: 43,152 h, functionality: fully functional, machine/vehicle number: API570324, overall weight: 1,076 kg, total length: 1,700 mm, total width: 900 mm, total height: 1,600 mm, space requirement length: 2,700 mm, space requirement width: 1,900 mm, space requirement height: 2,100 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 406.8 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Complete industrial compressed-air package comprising an Atlas Copco GA37 VSD 37kW variable-speed rotary screw compressor together with a 2018 Hi-Line Tundra 300 refrigerated air dryer. The variable-speed drive automatically adjusts compressor output according to air demand, making this an efficient solution for industrial applications with varying compressed-air requirements. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. The system includes a Fjdpjzzpttofx Albegg HI-LINE TUNDRA 300 REFRIGERATED AIR DRYER - Model: Tundra 300 - Year: 2018 - Maximum working pressure: 16 bar - 230V single-phase - Power: 1.73kW - Refrigerant: R407C - Serial No: 18M-014875 - Original operating manual included The dryer has been installed alongside the Atlas Copco to provide a complete compressed-air solution. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Available for inspection by appointment. Location: Caerphilly, South Wales Buyer to arrange collection/disconnection and transport. Further photographs and operating information available on request.