Used Optimaizing Saw for sale (5,648)

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm Dcsdpfjqy E Rlex Ac Njc spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW Dcsdpsq Ii Dlsfx Ac Nec working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: ready for operation (used), KUPFERMUHLE four-sided planer with additional table, multi-saw 600x200mm - after technical overhaul - made in Germany - STRIPPING HEIGHT TWO SIDES 200 mm - ideal for wet wood - electrical height adjustment - double feed chain - additional pre-table with head 340 mm - additional material feed system TECHNICAL PARAMETERS: planing width 600 mm planing height on two sides Dcodpfxjr Iik Is Ac Nec planing height on four sides 200 mm 100 mm power of vertical spindles motors 2 x 5.5 kW power of lower shaft motors 7,5 kW power of top spindle motor 11 kW power of first head motor 4 kW power of multi-saw engine 15 kW vertical heads adjustable four top drawing shafts three bottom drawing shafts two receiving drawing rollers 4 knives per shaft shaft diameter 145mm six types of feed speed 7 / 9 / 11,5 / 14 / 18 / 23 m/min 2 rows of anti-rejection pawls diameter of spindles 40 mm blade diameter max 250 mm spindle length 340 mm overall dimensions (L/W/H) 400 x 210 x 180 cm weight 3900 kg

Year of construction: 2008, condition: excellent (used), Double-head band saw LIGNUMA MM-700/2 PION Dcodpfx Acoi Ezwmj Nsc – Polish production TECHNICAL PARAMETERS: min. diameter of the processed log 150 mm max. diameter of the processed log 600 mm min. length of processed log 1200 mm max. length of processed log 3000 mm input table length 3500 mm main engine 2 x 11 kW feed motor 0.75 kW cutting system adjustment motor 2 x 0.37 kW smooth feed adjustment band saw length 4010 mm band saw width 32 - 50 mm band saw thickness 0.9 - 1.25 mm module 22.2 mm cutting thickness programmer hydraulic tensioner of the band saw dimensions (length/width/height) 6000 / 2600 / 2100 mm weight 1700 kg

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 23012209, This is a 2-burner stove from the premium manufacturer MKN, model Optima 850, year of manufacture 2023. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. The stove is in very good used condition. You will receive an invoice with VAT shown separately. The manufacturer's recommended retail price (RRP) is €5,780 net. Our used equipment service for you: • 6-month warranty on all electrical components • High-quality branded appliances at fair prices • Professional refurbishment/inspection & expert cleaning • Tested & fully functional – or your money back • Flexible choice of shipping or pickup • Expert advice – before and after your purchase • Provision of operating manuals, connection diagrams & spare parts Technical data: • External dimensions (W x D x H): 400 x 850 x 700 mm • Type: Optima 850 Type 2063401 • Model: 2063401 • Year of manufacture: 2023 • Serial number: 23012209 • Weight: 47 kg Condition: Used, comprehensively inspected, fully functional Further specifications: • C-burner 3.5 kW (front), E-burner 7.0 kW (rear) • DN 20 (3/4") gas connection required • Heavy-duty removable cast iron grates • Open base with adjustable stainless steel feet Features: Atmospheric burners, pilot burner, thermoelectric safety device, universal gas valve, shut-off valve Nominal heat load: 10.5 kW, natural gas 20; 25 mbar or LPG 30; 37; 50 mbar Shipping: Dedexb Agtopfx Ac Necc • Delivery or pickup by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by prior arrangement

Condition: used, machine/vehicle number: 008186, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 110 mm No of Grippers: 11 Dcsdpsxaudzsfx Ac Noc

Condition: used, machine/vehicle number: 008380, Max. panel width: 3800 mm Dcedpoygtb Tefx Ac Nsc Max. panel length: 3800 mm Main saw blade projection: 75 mm No of Grippers: 8

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Max. panel length: 3800 mm Dedpfjygtbtox Ac Njcc Main saw blade projection: 55 mm No of Grippers: 6

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2200 mm Dcodpjygtbmsfx Ac Nsc Main saw blade projection: 110 mm No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Dodewuucijpfx Ac Nscc Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6

Condition: used, machine/vehicle number: 008409, Max. panel width: 4400 mm Max. panel length: 2200 mm Main saw blade projection: 120 mm No of Grippers: 10 Dedpfx Acsygta Ao Necc

Condition: used, machine/vehicle number: 008396, Max. panel width: 2200 mm Max. panel length: 4300 mm Dodpfx Aceygtaco Njcc Main saw blade projection: 95 mm No of Grippers: 9

Year of construction: 2016, condition: excellent (used), functionality: fully functional, X-axis positioning speed HS version: 50 m/min Electronic control of intermediate angles Max. internal inclination: 45° Max. external inclination: 15° Electronic CNC feed axis for the saw blade Usable cutting length, depending on model: 5 m Saw blade diameter: 550 mm Conveyor belt for step-by-step or automatic cutting Dcodpsygr H Iofx Ac Nsc Windows XPE operating system 10.4” color graphic TFT display – 800x600 (SVGA) Touch screen functionality

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Djdpfxswuck Io Ac Nocc Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Dodpfexw Ii Sex Ac Nscc Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting panel saw T 73 by Martin, equipped with 3-axis scorer and 3m sliding table Sliding table length: 3000 mm Saw blade tilting range: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Saw blade diameter up to 500 mm Maximum cutting height: 170 mm Cutting width up to 1100 mm, adjustable from the front via handwheel and manually movable Tilting angle and height electrically adjustable Crosscut fence with 2-point stop up to approx. 3350 mm Parallelogram cross table with digital angle display and roller Folding rip fence Extraction ports: 120 + 100 mm Sliding table can be locked in any position Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scorer unit, fully electrically adjustable while the machine is running 2 blade guards Miter fence for acute angles Tool compartment Emergency stop switch Operating manual CE marking The machine shows minor signs of use on the anodized sliding table. Small cuts on the sliding table have been repaired. Original paintwork, only touched up in a few places. Excellent condition as seen in the original photos. Dimensions approx. 3300 x 3750 x 1600 mm (LxWxH). Weight approx. 1950 kg. Djdpfxsxtvcxj Ac Njcc The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Cutting height 1.800 mm machine weight ab. ca. 600 kg kg Dcsdoygm Tiopfx Ac Noc

Condition: excellent (used), Year of construction: 2001, Mayer FH2-3520 Veneer Saw, precision cutting saw with jointing unit (planing unit) and veneer alignment table Robust machine construction by Mayer A video of the machine in operation can be sent on request. Dcsdpfxsx Hqtzs Ac Njc For tear-free, perfectly joined cutting of veneer, including thick-cut veneer Maximum cutting length: 3500 mm Saw and jointing units are combined in one assembly, so only one unit needs to be moved. Easy-to-operate saw unit running on linear guides. Rear outfeed table with through-finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor 1.8 kW, jointing unit (milling unit) motor 1.2 kW Motors can be conveniently switched on at the handle and operate only when needed. Fine-cut blade with carbide tips, sharpened Planer head Z4, equipped with new carbide indexable inserts, including spare knives Practical front veneer shelf, extendable for the planing unit Extraction port 100 mm with extraction duct CE marking Operating manual Standard tool kit Original paint, only minor touch-ups Dimensions approx. 5050 x 1700 x 1400 mm (L x W x H). Weight approx. 900 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see ‘more offers from this seller.’

Condition: good (used), Double Mitre Saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade Ø 330 mm - Cutting range at 90°: 195 x 90 mm; at 45°: 135 x 90 mm Dsdpfsygm Akjx Ac Njcc - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping system

Condition: like new (used), Used automatic hydraulic bandsaw IMET BS 350 AFI-E +ESC Blade dimensions: 3370x27x0.9 mm Cutting capacity at 0°: round 305 mm, square 250x250 mm, rectangular 350x200 mm Dodpfx Acovguyyj Njcc Cutting angle: from -45° to +60° Blade speed: two speeds Vertical vise

Condition: like new (used), Year of construction: 2022, Used AC 400 Circular Saw for Aluminium Year of manufacture: 2022. The saw has seen very little use and is in excellent condition. Includes 2m roller table. Miter cutting up to 45° to the right and left Detent positions at 15° – 22.5° – 30° – 45° – 67.5° Motor power: 1.5kW Voltage: 400V Adjustable feed rate for various profile types Blade speed: 3000 rpm Blade size: 400x32x4mm Easy blade replacement Double pneumatic vertical clamps Dcjdpfx Acsyhzq Ne Nec Two horizontal clamps Saw hood with safety switch Two-hand safety operation Machine weight: 132kg Machine dimensions (LxWxH in mm): 720x760x1330 Spray cooling system Supplied with air blow gun Hydro-pneumatic blade feed with speed adjustment User manual in Slovene and CE declaration included Manufacturer: Tubend - Tugra makina metal (Turkey)

Condition: good (used), Segura 117 metal band saw - Tilting table - With Ideal bandsaw blade welding device - Very heavy-duty design - Speed control Dcedpjygmztjfx Ac Nsc

Condition: new, Year of construction: 2026, Three-phase 400V motor with frequency converter (kW) 3 Saw blade dimensions (mm) 5200 x 34 x 1.1 Flywheel diameter (mm) 480 Cutting speed (m/min) 20 – 120 Clamping width (mm) 610 Working height (mm) 780 Machine dimensions without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard features Ergonomically designed, robust welded frame construction for miter cuts from 0° to 60° right/left Sturdy, low-vibration frame construction with arm joint mounted on plain bearings Clearly arranged control panel on the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for maximum cutting performance Cutting Accuracy Requirements Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed: hydraulic including automatic cutting pressure regulation Miter adjustment and clamping (manual) Hydraulic full-stroke cylinder for vise (pull-down version) Floating vise Blade tension and saw blade breakage monitoring Easily removable chip collection trays Hydraulic blade tension indicator Integrated coolant supply (30 l tank capacity) LED work light Digital miter indicator Including saw blade with 3/4 combi-toothing Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Please inquire about additional accessories. Dcsdpjukgiqjfx Ac Noc DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1992, functionality: fully functional, saw blade diameter: 350 mm, Crosscut and mitre circular saw Graule ZS135, year 1992 -Motor power: 2 kW -Speed: 3800 rpm -Saw blade: Ø 350 mm, tiltable Dodpfx Acjyhzlaj Nocc -Cutting capacity at 90° flat: 430 x 135 mm -Cutting capacity at 45° flat: 300 x 135 mm -Transport dimensions: 1150/910/H1200 mm -Weight: approx. 100 kg

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting Djdpfjyhzifsx Ac Njcc A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.