Used Operating Resolution for sale (25,253)

Condition: used, Year of construction: 2020, operating hours: 6,450 h, Drive: Wheel CE mark: yes Serial number: VCEW160EV0032xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22099 Specifications: Model: 2020 Hours: 6450 (may increase) Weight: 19,900 kg Power: 115 kW Tires (see pictures) Trailer hydraulics Ledpfx Afex Nl Rajfota Blade Total width: 255 cm Steelwrist Rototilt with grab Excavation bucket Grading bucket Rotary beam Extra lights Radio/CD Climate/AC Delivery by agreement Notes: Trailer and GPS are not included Description: Volvo EW160E wheeled excavator from 2020 for sale! The machine has only operated for 6,450 hours. It is in daily use, so the hours may increase. It is sold with rototilt and two buckets. Delivery can be arranged. Hours: 6450 Own weight: 19900 Year controlled: no Width: 255 Kw: 115 CE: Yes Model: EW 160 E

Condition: ready for operation (used), Pull tube for tensioning device from IKEGAI TURN 25 , length tube: 730 mm, Ø 75 mm, hydraulically operated, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Ltsdpfx Afex Nlurjfsa

Condition: used, maximum load weight: 25,200 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/2019, next inspection (TÜV): 03/2026, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,870 mm, Year of construction: 2019, Equipment: ABS, HEITLING 3-axle push-off semi-trailer PUSH-Trailer 55 cbm First registration Volume approx. 55 cbm Unladen weight approx. 8,805 kg Ltedpex Nlhlofx Affea Fifth wheel height 1,250 Crank supports WABCO trailer EBS SAF axles reinforced version "CD" with disc brakes 1st and 3rd axle LIFTING AXLE ALCOA aluminum rims Dura-Bright high-gloss Tires 6x 425/65 R 22.5 Lighting full LED 4x LED work lights Aluminum side wall profiles fully welded inside Hydraulically operated push-off wall, viewing window in push shield Hydraulically operated tailgate Control with RADIO REMOTE CONTROL Loading floor: Front segments made of stainless steel V2A, Rear segments made of 4 mm aluminum, above which 1.5 mm stainless steel floor plate glued as wear sheet Hydraulic tarpaulin system, 2-piece with net covering RENTING is the new BUYING, with us also available immediately in full-service rental-----

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 06/2025, fuel type: diesel, overall weight: 3,250 kg, color: red, gearing type: automatic, emission class: euro6, number of seats: 4, loading space length: 2,030 mm, loading space width: 1,840 mm, loading space height: 350 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Errors and prior sale excepted! Ltsdpfx Aex Nlbroffea Internal number: 23496 ---LOCATION: 04425 Taucha, Gerichtsweg 4 Inquiry phone number: Mr. Ralph Bergel: ---SPECIAL EQUIPMENT * Comfort Package 1: Inductive charging station for mobile devices - 400-watt voltage converter - switch set - 6 switches * Load compartment protection tray - integrated lashing eyes - 12-volt outlet at the rear on flatbed * Outdoor Package 2: Engine and fuel tank guard, steel - 100% locking rear differential * Programmable auxiliary heater with remote control * Technology Package 68: Adaptive cruise control incl. intelligent speed limiter - Blind spot assistant with trailer cover detection - 13-pin towing equipment - Advanced lane keeping assistant incl. lane keep assist and drowsiness warning - Park Pilot system front and rear - Reverse emergency braking function - 360-degree camera with "Split View" technology * Conversion to 3-side tipper: hot-dip galvanized lightweight steel profiles - fold-down side panels - lashing eyes integrated into the chassis frame - 4 ball tipping bearings with 2 plug pins to set the tipping direction - hydraulic cylinder operable from cab - acoustic warning when tipper body is not lowered - LED tail lights FURTHER EQUIPMENT * ABS * Two front tow hooks * Four-wheel drive (switchable) with electronic transfer case selection * Towing preparation kit * Exterior mirrors electrically adjustable, heated, electrically foldable * Battery management system * Light-colored woven fabric headliner * Theft alarm system incl. double locking with interior monitoring * ESP * Electric windows * High beam assistant * Ford Easy Fuel - comfort fuel filler and misfueling protection * Ford Key Free system * FordPass Connect incl. eCall and WLAN hotspot * Heated windshield * Extendable cup holder * Auto-dimming rearview mirror * 8-inch digital instrument panel * Integrated rear step * 2-zone automatic climate control with dust and pollen filter * LED fog lights * LED headlights * Heated multifunction leather steering wheel * Front center console with integrated armrest * Package: Off-road package - rotary switch driving modes - Terrain Management System with 6 selectable drive modes - Off-road SYNC display * Package: Wheel Package 35 - 4 alloy wheels 7.5J x 18 with 255/65 R 18 all-season tires, Asphalt Black Matte-Silver - 18” aluminum spare wheel * Package: Rear seat 18 - two folding emergency seats with two 3-point seat belts - seatbelt warning front and rear * Package: Safety Package 2 - Advanced airbag restraint system - front passenger - passenger airbag deactivation function - driver’s front airbag - driver and passenger seats with reinforced side bolsters - knee airbags for driver and passenger - curtain airbags above side windows - side airbags for driver and passenger - reinforced body structure - reinforced chassis * Package: Seat 7 - driver's seat 8-way electrically adjustable incl. lumbar support - front passenger seat 4-way manually adjustable - seat heating for driver and passenger - map pocket on driver’s seat back * Diesel particulate filter (DPF) with SCR catalytic converter * Upholstery: Leather * Pre-Collision Assist including distance indicator and warning, forward collision warning and active emergency braking system * Radio: Audio system 89: Audio system

Condition: used, Machine type: CNC Horizontal Machining Center Model: FH6800 Manufacturer: MAZAK Control: Mazatrol 640M Year of initial operation: 2010 Location: Germany Options: - Number of tool magazine pockets: 80 pcs - MAZAK Monitoring B (Renishaw probe) - Software options package “Performance” - NC rotary table (C-axis) 0.001 degree - Chip conveyor Mayfran Consep 2000 - Through-spindle coolant (IKZ) pressure: 20 bar Travel X-axis: 1,050 mm Travel Y-axis: 800 mm Travel Z-axis: 880 mm Rapid traverse X/Y/Z-axis: 40 m/min Pallet size: 630 x 630 mm Max. spindle speed: 7,000 rpm Ltsdpfx Afexxzlvjfja Coolant supply: 20 bar

Condition: used, Year of construction: 2017, operating hours: 406 h, 2017 | Genie TZ34 (12m) | Used Trailer-Mounted Boom Lift | 406 hours Lodpox Nklisfx Affeta 📍Location: Latvia, Rīga 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 13900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 26 inspection points 26 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine is quite rusty, but everything works as it should 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38133 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2009, Additional Equipment Feeding device for efficient and comfortable semi-automatic feeding of veneer strips. Panel automatic for component-matched faces with pre-sorted components and preselected number of veneer strips. Lsdpfx Afsx Nkndofsta This FISCHER & RÜCKLE FZR15 / DAR 22 was manufactured in 2009. A used veneering machine, it excels in efficient crossfeed glue splicing of veneer strips. It features a semi-automatic feeding device, a panel automatic for component-matched faces, and a direct stacking device DAR-22 for gentle discharging and stacking. Ideal for high durability and ease of operation. Contact us for more information about this machine. Application Types Veneering

Year of construction: 2017, condition: used, Used Battery-Powered Vacuum Lifter Year of manufacture: 2021 The Mobylift TC is specially designed for furniture manufacturers and interior fitters to lift panels from a stack or remove them from a rack and place them onto a table saw, upright or horizontal panel saw, or CNC machine. It is easy to operate, reduces the number of damaged products, increases productivity, prevents back issues, and thus reduces potential work absences due to illness. The chassis comprises a frame carrying the counterweights, the 24 V AGM battery system, and the lifting arm of the electric lifting and tilting system. The automatic vacuum unit is mounted on the jib arm. A rotating and swiveling head allows the vacuum unit to be manually rotated and swiveled into various positions. This head is equipped with a quick-lock system that allows both rotation and swiveling to be locked so that products do not need additional securing during transport. The automatic vacuum device consists of a frame and extendable arms equipped with six robust suction cups. The vacuum system maintains its pressure automatically once activated. The electric lifting and tilting system can be operated using the wireless remote control. Suitable for both non-porous and porous materials (e.g., raw and coated chipboard, MDF, OSB, etc.). Max. panel size: 2100 x 3200 mm Overall height: approx. 2050 mm Max. load capacity: 120 kg Max. lifting height: 1600 mm Tilting angle front/back: 100° Swivel angle on both sides: 90° Rotation angle: 360° Ltodpfxex Nkuke Affea Width: 830 mm Weight: 175 kg Electrical lifting and lowering Electrical tilting Manual rotation Manual swiveling Shipping dimensions: approx. 2500 x 830 x 2050 mm Shipping weight: 220 kg Availability: short-term Location: Flörsheim

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,054 h, load capacity: 4,500 kg, lifting height: 6,570 mm, free lift: 2,350 mm, fuel type: electric, mast type: triplex, construction height: 3,400 mm, fork carriage width: 3,350 mm, fork length: 1,500 mm, empty load weight: 10,130 kg, total length: 3,100 mm, drive type: Elektro, construction width: 2,740 mm, Four-way Side Loader Load Center: 750 Fork Width: 150 mm Fork Thickness: 60 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tire Type: Solid rubber Rear Tire Type: Solid rubber Battery Voltage: 48V Ltsdpfx Aex Nkqxjffoa Battery Capacity: 775Ah Battery Year: 2017 Description: In addition to this Hubtex model, we have approximately 200 heavy duty forklifts, compact forklifts, standard forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease purchase and financing on favorable terms are always possible. We are also happy to buy your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to offer you comprehensive advice on this MQ45. P.S.: Our master forklift workshop specializes in repairs, servicing, overhauls, and custom modifications of forklifts from 8 tons upwards. We are also happy to sell your equipment on consignment. Fork positioner, Fork positioner opening range: 530 / 3280 mm Full free lift, Platform height: 500 mm

Condition: used, Year of construction: 2006, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crusher plant, twin-shaft shredder, slow-speed, drive: electro-hydraulic, 200 kW electric motor, hydraulic unit with control cabinet and operator panel. The plant has been out of operation for approx. 0.5 years. Two brand new rotor shaft bearings and labyrinth seals were installed on the drive side two years ago. Electrical and hydraulic systems are untested: must be connected. Ltedpfxex Nkdre Affea

Condition: used, Year of construction: 2017, Universal Machining Center Ledox Dr Urjpfx Affota Machine type: DMG DMF 260 / 11 linear Control: CELOS Siemens 840D sl Operate Year of manufacture: 2017 TECHNICAL DATA: Travel distances: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Rapid traverse (X/Y/Z) [m/min]: 80 / 60 / 60 Spindle speed range [rpm]: 20 - 15,000 Options: - Main spindle: 15,000 rpm, 46/30kW, SK40 - Dynamic package rapid traverse x-y-z: 80/60/60m/min - X-axis linear motor - Separate electronic handwheel - 60-position chain magazine - Bed flushing via M-function - High-pressure coolant pump 40 bar - 600L coolant tank with paper band filter - Rotary table integrated into table - B-axis in head - Automatic door - Coolant gun - Spindle probe - 2 pcs. Roto clear - Scraper belt chip conveyor This offer is non-binding and subject to prior sale. Changes, errors, and interim sale expressly reserved.

Condition: used, Year of construction: 2014, 2014 | MAN TGS 26.480 Meiller | Used Roll Off-Tipper Truck | 468128 kms Ltsdpfx Asx Nklpeffja 📍Location: Germany, Offenbach am Main 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 39600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 31 inspection points 28 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Regular maintenance needed, truck and lifter in good shape 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39688 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2020, Injection Unit Shot weight 172 g Screw diameter 70 mm Lodpfjx Nkp Ijx Affota Clamping Unit Clamping force 2200 kN This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Features and Technical Data: - Drilling depth adjustment via maintenance-free linear guide - Efficient and economical operation thanks to rapid traverse system; manual cranking is eliminated - Smooth and steplessly adjustable drilling unit - Height adjustment with fine setting and gas spring for weight compensation - Cross travel and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Drilling depth adjustable via scale and stop - Drill head height adjustment can be fully used for vertical slotting - Large-dimension cast iron table with ground surface Motor power: 1.5 / 1.9 kW (2.0 / 2.6 HP) Voltage: 400 V Speed: 1,400 / 2,850 rpm Westcott drill chuck: 0–20 mm Maximum drilling depth: 220 mm Drilling width: 340 mm Height adjustment: 145 mm Drill head swiveling: -60° to +60° Ltedpfxexllwco Affea Drill table size: 595 × 315 mm Table extension: 2 × 200 × 220 mm Drill table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm (W × D × H) Weight: approx. 240 kg Availability: short-term Location: Flörsheim

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 16,387 h, load capacity: 16,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: simplex, construction height: 3,300 mm, fork carriage width: 2,500 mm, fork length: 1,850 mm, empty load weight: 22,400 kg, total length: 5,050 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 900 mm Fork width: 250 mm Fork thickness: 90 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 12.00-20 Rear tires type: Pneumatic Rear tires size: 12.00-20 Ltedpfx Aow Huw Roffoa Description: In addition to this Svetruck model, we have around 200 heavy-duty forklifts, compact forklifts, pallet trucks, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website — sago-online. Lease-purchase and financing at attractive terms are always available for us. We are also happy to buy your used vehicle outright, even if you do not purchase a truck from us. Our owner, Mr. Peter Sawitzki, will be glad to provide you with comprehensive advice regarding this unit, ref. 1690. P.S.: Our master forklift workshop specializes in repair, servicing, general overhauls, and special construction for forklifts from 8 tonnes upwards. We are also happy to offer your vehicle for sale on consignment at our premises. Sideshift, fork positioner, Cab heater, full cabin,

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Ltodpjgrzh Eefx Affoa Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Year of construction: 2018, Machine type: CNC Turning Center Model: NLX3000Y/200 Manufacturer: DMGMORI Control: CELOS Year of manufacture: 2018 Location: Germany Swing diameter over bed: 894 mm Swing diameter over cross slide: 808 mm Max. turning diameter: 420 mm Standard turning diameter: 366 mm Max. turning length: 2,123 mm Max. bar capacity: 90 mm Travel range Ltsdpfxox Nh N Es Affsa X-axis travel: 280 mm Z-axis travel: 2,170 mm Spindle Max. spindle speed: 3,000 min⁻¹ Spindle nose: JIS A2-8 - Main spindle reinforced 30/25 kW - Hollow clamping cylinder for BB212 on main spindle - Jog operation at the chuck - Double foot switch with protective cover - 12-station turret with driven tools and higher torque - Chip conveyor - Interface for high-pressure coolant system, 70 bar - Knoll KF110/700 compact filtration system, 7.0 MPa - Coolant gun - Compressed air blow-off system for tool cutting edges - AFS 1600 oil mist extractor unit - Programmable tailstock (drag type) - Double foot switch for the tailstock - Automatic door for machining area (/2000) - X-axis linear scale - Alternating spindle speed - Multi-threading cycle - Automatic travel monitoring of the clamping cylinder (Errors and omissions in the technical data and specifications excepted)

Condition: used, Year of construction: 2019, operating hours: 2,321 h, 2019 | Wacker Neuson EZ26 | Used Mini Excavator < 7t | 2321 hours 📍Location: France, Saint-Étienne 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Ltedpfx Afsx Nkl Njfja 💰 Buy Now for EUR 19200 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 65 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very nice and recent mini-excavator with two buckets. The machine was in good working order and has been well maintained. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39887 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2017, Additional Equipment Hydraulic unit with pump, oil tank, and valves for operating the pressure and auxiliary cylinders Ltjdpfjx Nkm Hex Affoa Hydraulic control unit located at the upper part of the press for maintenance ease Control panel with buttons, selector switches, and a pressure control gauge This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information. Application Types Pressing / Laminating

Condition: used, Used jacketed stainless steel mixing tank by Diessel (D). Total volume 670 l. Working volume approx 500 l. Mixing chamber has internal dimenssions: Ø 985 mm x length of straight side of the wall 1060 mm. Working pressure up to 3 bar at 144 C. Tank has stainless steel heating jacket with volume 52 l. Working pressure up to 3 bar, at 144 C. Top opened by accutator, has mounted paddle type agitator, driven via gearbox and el. motor 1.5 kW. Working rotation of agitator up to 365 rpm. Central bottom discharge outlet with manually operated valve. Tank is mounted on 4 stainless steel legs and equipped with local control panel with frequency converter. Specifications: Ledpsx Niy Ejfx Affsta Capacity: 132.1 gal Diameter: 3.23' Height: 3.48' Vertical/Horizontal: Vertical Dimensions: Ø 985 x 1060 mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,302 h, load capacity: 2,500 kg, lifting height: 7,400 mm, free lift: 2,370 mm, fuel type: electric, mast type: triplex, construction height: 3,100 mm, fork length: 1,700 mm, total length: 2,100 mm, drive type: Elektro, construction width: 1,350 mm, Reach truck Load center: 600 mm Fork width: 125 mm Fork thickness: 45 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Battery voltage: 48V Description: In addition to this Jungheinrich model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and finance options are always available on favorable terms. We will also gladly buy your used machines outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice about this ETV325. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom-built solutions for forklifts from 8 tons upwards. We also offer consignment sales of your vehicle at our premises. Sideshift, Full free lift, Ljdpfx Afex Nkqrsfeta

Condition: good (used), Year of construction: 2019, operating hours: 8,173 h, functionality: fully functional, turning length: 12,025 mm, turning diameter: 480 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, bar passage: 102 mm, overall weight: 7,200 kg, controller model: DMG MORI SLIMline Multi-Touch Control, control type: CNC control, CLX 550 V6 2-axis universal lathe with driven tools incl. C-axis, Y-axis, and counter spindle Standard equipment: Ljdpfxjxx Tcme Affjta 1. Ergonomic DMG MORI SLIMline operating panel 2. Main spindle A2-8 with AC motor, drive power 22 / 33 kW (100/40% DC), 3,250 rpm 3. Counter spindle A2-6 with ISM 52 synchro, drive power 13 / 14 kW, torque 171.5/192 Nm (100/40% DC), 5,000 rpm 4. 12-position servo turret, VDI 40 mounting with Trifix® precision interface and 12 driven tool stations per DIN 5480 5. Y-axis ± 60 mm 6. Chip tray 7. Hollow clamping device, max. bar capacity D 80 mm 8. Electronic handwheel Drive power (100%/40% DC) 22/33 kW Hydraulic clamping device with bar capacity diameter 102 mm, surcharge Differential pressure clamping for main spindle Bar package & interface option includes: - Workpiece unloader for parts up to D 80 x 200 mm long (D 100 x 200 mm with option C-B7000G) Max. workpiece weight 4 kg - Interface for bar loader or bar feed unit (DMG MORI standard interface) - Hinged belt chip conveyor instead of chip tray - 4-color signal tower Recommended additional option: Double cartridge filter for coolant, especially for production environments with very high chip volumes. Automatic workpiece ejector for counter spindle with internal coolant supply for clamping device flushing. Note: Option recommended for machines with workpiece unloader option. External flushing for counter spindle, option recommended for machines with automation Differential pressure clamping for counter spindle Tailstock function for counter spindle, mechatronic force control programmable in the software (force 250-600 daN), including foot switch (only for CLX 550 V6) Direct measuring system for X- and Y-axis (option only available for V4 and V6 versions) Manual tool measuring device in the working area, brand Marposs Documentation according to 'Technical Documentation Delivery List' – included in the machine price. Software option: DXF import for converting DXF files into NC programs (SIEMENS control) Tool monitoring system: Easy Tool Monitor 1.0, monitors each cutting operation against a set limit. Simple learning function for determining the monitoring limit per tool and cutting operation; manual adjustment/correction possible. Technology cycle: Alternating speed (turning) for vibration-sensitive applications Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and professional installation – everything from a single source. Billing based on individual terms and duration. Contact us for your personal offer.

Condition: ready for operation (used), Year of construction: 1998, pressure 120 t chamfer lenght 3050 mm distance between columns 2550 mm stroke of upper beam 155 mm throat 350 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 77.0 mm/sec Control "P 40" work height max. 878 mm table width 104 mm oil volume 150 l total power requirement 11.0 kW Ledpfx Aox Ni Ebsffsta weight 7550 kg range L-W-H 3550 x 2150 x 2600 mm Equipment: - NC electro-hydraulic press brakes - with NEW ELGO NC control unit "P40" * New price approx. 4.000 Euro * Control / movement of the backgauge - X axis (target/actual input) * Control / movement of the depth setting - Y axes (target/actual input) * Inching mode for X axis Y axes also possible - Swivel operation, front left - NC controlled axes : Y1 Y2 X - NC electro-motorized backgauge (X axis) * with 2x manually adjustable stop fingers * including lateral and height adjustment (Z R axis) - 1x branded set of upper tools (split) - 1x branded Multi-V bottom die block - Lateral safety guard (hinged doors) - Rear safety guard (hinged door) - 1x free-moving 2-hand/foot control - Operating instructions (PDF)

Condition: used, Year of construction: 2012, operating hours: 2,448 h, 2012 | Wacker Neuson 803RD | Used Mini Excavator < 7t | 2448 hours Ljdpfx Ajx Nklvjffota 📍Location: France, Saint-Étienne 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 10800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 58 inspection points 54 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition. The battery was out of order and the alternator needed to be checked – this was observed during the inspection. However, the seller has replaced both the battery and the alternator, and now everything is working properly. Variable track, 2 buckets. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39891 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2019, operating hours: 1,623 h, 2019 | Ammann AFT 700-3 | Used Asphalt Paver | 1623 hours 📍Location: France, Bourg-de-Péage 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 78400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 52 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good working order, maintenance up to date, hopper 6 M3, width 3 to 6 m. No centralized lubrication. Everything works except the small table cleaning pump. The control panels used on the floor stations are not visible. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "37771 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Lodpfxox Nklcs Affeta