Used Operating Facilities for sale (25,297)

Condition: used, Year of construction: 2017, operating hours: 821 h, 2017 | Genie TZ-50 Hybrid w/Drive (17m) | Used Trailer-Mounted Boom Lift | 821 hours 📍Location: Latvia, Rīga 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 18500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 27 inspection points 27 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is in overall good condition. The engine was not operational at the time of inspection; however, repairs will be completed prior to sale. 📄 Want to see the full inspection, extra photos, or a video? Itsdpfx Afsxppwzjisn Tip: The reference "38150 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2019, operating hours: 17,529 h, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Operating hours: 17,529 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal Itsdpfx Afswgnigeion W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21- axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: used, Year of construction: 2018, Used machine Year of manufacture 2018 Basic equipment Electric height and tilt adjustment 0-46° with automatic cutting height correction when tilting Control at eye level, pivoting Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Max. sawblade projection 150 mm Max. sawblade diameter 450 mm Drive power 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height 91 cm Productivity package Motor 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life. Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a max. sawblade diameter of 550 mm and a max. sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the max. sawblade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). Two-sided tilting! RAPIDO Plus 3-Axis Scoring Unit With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED Lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. Iodpjxppv Refx Afijtn Sliding Table with a Carriage Length of 3000 mm Basic Equipment Sliding Table with a Carriage Length of 3000 mm The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in the respective hard-chrome-plated guide rods. This running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-cavity system. The table surface is precisely planed and anodized. A hard-chrome-plated round bar, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. DIGIT-L Angle Miter Stop, Cutting to Lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the swivel angle is continuously adjustable by 49° and is digitally displayed. The play-free and robust stop flaps can be easily moved and adjusted as individual flaps over the entire range up to a maximum of 3500 mm. For cutting to lengths up to approx. 1700 mm, the roller-supported, stable telescopic

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Iedpfoxpn T Uox Afiotn Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2018, functionality: fully functional, Fully operational washing system, original price €93,000.00! Configured as follows: QUANTUS C165, DFH 2,250, DFB 2,400, TH 1,700 QU01010 Base price €58,027.50 Grey water recycling equipment QU00370 1 unit €1,620.00 Articulated arm system, DFH 2,250 QU01210 1 unit €6,075.00 SENSOFIL +, DFH 2,250mm QU01410 1 unit €6,397.50 Splash guard for roof brush QU00142 1 unit €450.00 Wheel washing unit with brush, linear technology QU00151 1 unit €3,915.00 Side high pressure, 2 RDÜ, 1 overflow, 20 l/min, 85 bar QU00152 1 unit €2,797.50 Iodpoxpnvvefx Afiotn Side high pressure, 8 ODÜ, 1 overflow, 40 l/min, 50 bar QU00169 1 unit €4,935.00 Item No. Qty Unit Price Total Price EUR Active foam system QU01500 1 unit €2,107.50 Special waxing system (water application) QU01530 1 unit €2,685.00 Emergency stop device, front left QU00320 1 unit €352.50 Emergency stop device, front right QU00330 1 unit €352.50 Emergency stop device, rear left QU00340 1 unit €352.50 Emergency stop device, rear right QU00350 1 unit €352.50 Positioning device, LED, fixed, left (Forward, Stop, Reverse / Arrow, Stop, Arrow) QU00388 1 unit €727.50 Positioning device, LED, fixed, right (Forward, Stop, Reverse / Arrow, Stop, Arrow) QU00389 1 unit €727.50 Fresh water network separation, pipe separator EZ00000 1 unit €645.00 Energy supply chain (boom/console galvanized) EZ00020 1 unit €502.50 Control terminal, VARIO-L, wall-mounted EZ02500 1 unit included Wheel guide rails EZ00700 1 unit €757.50 Sign DIN A3 "Our Washing Offer", 5 programs EZ02005 1 unit included Sign DIN A3 "Important Washing Information" EZ02000 1 unit included Sign DIN A3 "Important Safety Information" EZ02010 1 unit included Sign DIN A3 "How It’s Done", Single / Double PWA, Spring, Summer, Autumn EZ02020 1 unit included Sign DIN A3 "How It’s Done", Single / Double PWA, Winter EZ02030 1 unit included Sign DIN A3 "General Terms and Conditions" EZ02045 1 unit included Documentation, PWA, Standard, DE, single copy DOC0000 1 unit included VDA Certificate of Conformity, PWA, DE, single copy (new system) DOC0200 1 unit included Starter set of chemicals, PWA CH00000 1 set included Total order value: €93,780.00

Condition: ready for operation (used), Year of construction: 2007, operating hours: 18,500 h, functionality: fully functional, machine/vehicle number: MH 3725, cutting force: 600 t, power: 180 kW (244.73 HP), empty load weight: 96,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 96,000 kg, cutting length (max.): 7,100 mm, Hydraulic scrap shear Taurus 600 t, Type C672P.EB2L Year of manufacture: 2007 Operating hours approx. 18,500 Filling box: 7100 mm Drive: 2x 90 kW Itjdpfx Aoxpnlwefisn Lid force: 3000 kN 4x side cylinders Hold-down device Central lubrication system Control: PLC Oil heating available Remote control and operation from operator panel possible Throughput for mixed scrap: 10–17 t/h Very fast and high-throughput machine Including Pramac generator GSW455V 420 kVA from 2017

Condition: used, Year of construction: 2006, operating hours: 3,446 h, 2006 | Moxy MT 41 | Used Articulated Dump Truck | 3446 hours Iedpfx Ajxppwuefietn 📍Location: Germany, Himmelstadt 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 79800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 56 approved ✅ 8 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The vehicle in question is in a used condition commensurate with its age and mileage. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "35706 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, Heller FMS with 2 x H2000 Machine make / type: HELLER H2000 Operating hours: 59,654 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: PC63 10,000 rpm, 38 kW, 242 Nm Tool clamping system: HSK63 Magazine / positions: Chain magazine / 160 positions Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make / type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK63 Magazine / locations: Chain magazine / 240 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Iedpfxewh Td Ee Afijtn Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make/type FASTEMS FPC750 with expansion container Operating hours: No counter installed Year of manufacture: 2016 Control system: FASTEMS Memory locations: 24 memory locations, 2 setup stations Workpiece clamping: Mechanical Additional options, special features: 20 pallets included Further information and technical specifications upon request.

Condition: used, Technical details: Working width: 1700 mm Workpiece thickness max.: 150 - . 4,0 mm grinding belt dimensiones: Umlauf mm machine dimensions LxWxH: 4,8 x 2,7 x 2,35 m For woodworking!!!!! Isdpfxou Ng R Ho Afijtn pneumatic conveyor guide height adjustment via hand wheel EMERGENCY STOP switch - grinding rolls adjustment - band clamping device - roller conveyor ( infeed and outlet each L: 2800 x W: 1700 mm each with6 pc Rolls) motoric driven - operation via control panel - worpiece thickness min./max. 4,0/150mm - grinding belt width 1300mm - grinding belt support length / width: 1700/1350mm ON SALE AS IS without electric cabinet, because machine was operating in a production line with other machines and one electric cabinet! Machine won't be connetcted! *

Condition: used, Working width 230 mm Working height 15-120 mm Number of spindles 2 St. Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure Isdpfxexpn Tze Afietn pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. Machine with full enclosure and integrated sound and dust protection including interior lighting. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC - 204 - 1. Other electrical regulations are not taken into account. Machine includes operating tools, but does not include machining tools. The Weinig Uniplan spindles operate at a speed of 7200 revolutions per minute. Before using existing tools, please check that they are suitable for the speed. Please also consider this when ordering new tools. Technical specifications Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed: 3 kW (4 HP) Horizontal spindles each: 7.5 kW (7.5 HP) Infinitely variable feed speed: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Maximum tool radius: 163 mm Fixed clamping clearance at bottom: 0.5 mm (Technical data according to the manufacturer - no guarantee!)

Condition: used, mileage: 422,953 km, power: 302 kW (410.61 HP), first registration: 09/2019, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 06/2026, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Retarder, PTO (power take-off), emergency brake assist, lane departure warning system, adaptive cruise control, ABS, traction control, differential lock (rear axle), hill start assist, cruise control, PREMIUM infotainment system with navigation, rear view camera / pre-installed wiring, multifunction steering wheel, automatic gearbox operated via steering column stalk, stationary air conditioning system, automatic climate control, auxiliary hot air heater, heated windscreen, comfort suspension driver’s seat, single sleeper berth, refrigerator, heated and electrically adjustable exterior mirrors, electric windows (driver and passenger side), fog lights, hydraulic connection for single-line semi-trailer, air suspension with lift/lower function (rear axle), aluminium wheels. Vehicle may have promotional decals and/or lettering. Our offer generally does not include a new roadworthiness inspection (TÜV). Should you require a new TÜV inspection, we will gladly provide a quote from one of our partner workshops! Vehicle may have promotional decals and/or lettering. Our general delivery and payment terms apply. We are happy to prepare a financing or leasing offer for this vehicle. Itsdpfow Hkdtox Afijn Please contact us!

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 2757 Measurements depth 2426 Machine weight 5400 KG Control Unit Brand Heidenhain Slimline TNC 620 Main Drive Spindle speed range 15000 Tool taper CAT 40 Movement X-Axis Movement 800 Y-Axis Movement 560 Z-Axis Movement 510 Itjdjxpkrtspfx Afien Table Outer length 1100 Outer width 560 Table load 800 KG This vertical machining center was manufactured in 2020. It features a spindle speed of 12,000 RPM and a CAT 40 spindle taper. The working table measures 107.46cm x 56cm, supporting a load capacity of 800 kg. Rapid traverse rates reach 1,181 IPM, ensuring efficient operations. Ideal for those looking to buy this DMG CMX 800 V vertical machining center. For more information about this vertical machining center, please reach out to us. Application Types Milling

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Itedpfx Afjxppwnoien

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Itjdjwgm Hkjpfx Afisn Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH primary impact crushers are among the most preferred solutions among rock crushing machines, offering high efficiency and superior crushing performance. They deliver excellent results in crushing soft and medium-hard rocks, limestone, marble, and similar materials. These crushers enable a high percentage of cubic product to be obtained thanks to their powerful rotor structure and optimized impact plates. This feature ensures that the final product is superior in terms of both quality and granulometric homogeneity. Thanks to the hydraulic adjustment mechanism, adjustments can be made quickly and safely. In addition, there is minimal time loss during maintenance. The durable body structure, manganese-lined inner surfaces that provide protection against wear, and wide feed opening guarantee long-lasting use and high performance. With all these features, primary impact crushers increase production capacity by reducing the need for secondary crushing in plants and lower operating costs. Primary Impact Crusher Technical Specifications MODEL: CPI – 1412 Rotor Diameter: 1,400 x 1,250 mm Maximum Feed Size: 900 x 900 mm Production Capacity: 200 – 250 t/h Motor Power: 250 kW Weight: 23,000 kg MODEL: CPI – 1415 Rotor Diameter: 1,400 x 1,540 mm Maximum Feed Size: 1,000 x 1,000 mm Production Capacity: 350 – 400 t/h Motor Power: 315 kW Iodpfjxpkgwox Afistn Weight: 28,000 kg MODEL: CPI – 1620 Rotor Diameter: 1,600 x 2,000 mm Maximum Feed Size: 1,300 x 1,300 mm Production Capacity: 400 – 600 t/h Motor Power: 2 x 250 kW Weight: 52,000 kg Why Choose CONSTMACH Primary Impact Crushers? CONSTMACH has proven its reliability with crushing and screening equipment manufactured to high engineering standards. Our Primary Impact Crusher models are designed for different capacity and application needs. Each one undergoes tested quality control processes and offers long-lasting use. In addition, thanks to our after-sales technical support, spare parts supply, and fast service advantages, you will get a return on your investment for many years to come. If you are looking for high performance, durability, and low maintenance costs, the CONSTMACH rock crushing machine series is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line ----- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 Iodpfx Aoxpn Tuefistn 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!)

Condition: used, Year of construction: 2017, operating hours: 355 h, 2017 | Manitou 100 Vjr Evolution (10m) | Used Vertical Mast Lift | 355 hours 📍Location: France, Pessac 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 36 inspection points 31 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ Itjdpfx Ajxppxfefisn 📌 Inspector's Comment: Very good general condition of the Lift, with quite significant wheels. Impact on guardrail, body of the basket, and deformation of the platform edges and the floor, presence of paint stains and oxidation. The covers are slightly damaged. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39678 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2006, operating hours: 48,659 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, Control unit: Siemens 840D PL Spindle: 7.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Isdjug T E Aepfx Afiotn Tool magazine & places: Rack 234 / Chain 50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1000 / 1000 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options: Infrared receiver for measuring probe (BLUM); Interface for attachment heads; fast drill fracture sensing (SBBK); codechip tool; Runtime and quantity recording; intergrated prozess monitoring IPM; Screen blow-off device for operator door; alternative strategy; toolplaning with MCIS TDI;

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH jaw crushers are designed to offer high durability and superior crushing performance, making them ideal machines for primary crushing operations in quarries and mines. They have the capacity to process a wide range of materials, from the softest limestone to the hardest types of granite and basalt. Their robust construction, high flywheel torque, and special jaw geometry ensure high-efficiency crushing of material into uniform sizes. The advanced hydraulic adjustment mechanism allows for easy adjustment of the desired output size and minimizes operator intervention. CONSTMACH jaw crushers ensure long-lasting use with their forged chrome-nickel steel pitman structure, heavy-duty bearings, and automatic lubrication systems. The welded main frame, which has undergone thermal stress relief treatment, maintains maximum durability even under high vibration. The user-friendly maintenance design provides an uninterrupted and safe working environment during production processes. These machines can be integrated into stationary or mobile crushing plants, offering high flexibility for projects. CJC-60 Technical Specifications Mouth Size: 600 x 380 mm Motor Power: 30 kW Shaft Speed: 330 rpm Weight: 6,000 kg Min./Max. Adjustment: 30 - 100 mm Production Capacity: 60 - 110 t/h CJC-90 Technical Specifications Mouth Size: 900 x 650 mm Motor Power: 75 kW Shaft Speed: 277 rpm Weight: 11,400 kg Min./Max. Adjustment: 50 - 150 mm Production Capacity: 90 - 270 t/h CJC-110 Technical Specifications Mouth Size: 1,100 x 850 mm Motor Power: 132 kW Shaft Speed: 230 rpm Weight: 33,000 kg Min./Max. Setting: 60 - 200 mm Production Capacity: 150 - 420 t/h CJC-130 Technical Specifications Jaw Opening: 1,300 x 1,000 mm Motor Power: 160 kW Shaft Speed: 220 rpm Weight: 42,500 kg Min./Max. Adjustment: 100 - 280 mm Production Capacity: 275 - 790 t/h CJC-140 Technical Specifications Jaw Size: 1,400 x 1,100 mm Motor Power: 200 kW Shaft Speed: 220 rpm Weight: 52,000 kg Itsdpoxpkgdefx Afijn Min./Max. Adjustment: 120 - 280 mm Production Capacity: 420 - 850 t/h Why Choose CONSTMACH Jaw Crushers CONSTMACH is a symbol of quality and reliability in crushing and screening technologies. Each jaw crusher model undergoes production processes that comply with international standards, ensuring maximum performance, low operating costs, and a long service life. With customizable design options tailored to customer needs and an extensive service network, it supports your business's uninterrupted production goals. In terms of reliable performance, engineering quality, and after-sales technical support, CONSTMACH is the right choice for crushing systems. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, working length 3600 mm Working width 1500 mm Working height ca. 900 mm WEINIG Return Conveyor System RF15 ----- Can be used after moulders, planers, and milling machines with a maximum feed speed of approx. 22 m/min. Itsdpfjxpn Tnsx Afijn Technical Description: Workpiece length: 250 - 3,600 mm Workpiece width: 30-230 mm Longitudinal-transverse conveyor with two integrated, driven roller conveyors: Transverse conveyor path 1,500 mm Constant conveyor speed: 30 m/min Roller conveyor length 2,200 mm Return roller conveyor (non-driven) to the operator (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2000, operating hours: 7,552 h, 2000 | Caterpillar 615C | Used Scraper | 7552 hours 📍Location: France, Cavaillon 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 112000 or Make an Offer. Itjdexppw Uepfx Afijn Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 52 inspection points 45 approved ✅ 5 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Some repairs needed. On the hydraulic side, a small leak by the engine, smoke coming out of the oil fill, left rear tire mismatched. Apart from that, in good condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39516 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2020, operating hours: 5,800 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, torque: 1,146 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, rotational speed (max.): 8,000 rpm, Machine name / type: HELLER / H 8000 Operating hours: 5800 Year of construction: 2020 Control unit: Siemens 840D SL Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: SK 50 Tool magazine / places: Rack / 265 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Iedpfx Afou Urgbeietn Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Condition: used, Year of construction: 2009, operating hours: 9,203 h, 2009 | MAN TGS 26.320 6x2-2 BL with Oil Steel Eagle 3526 (35m) | Used Truck-Mounted Boom Lift | 9203 hours | 115506 kms 📍Location: France, Les Chères 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 88000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points 62 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ Itodpfx Afjxppw Ioion 📌 Inspector's Comment: If the truck is stationary for a long time, it sinks and must be manually lifted to clear its alarm; swapping the relays also works. The truck has not been road tested; there were electrical issues with the boom lift that were resolved during the inspection. The machine is very sensitive to malfunctions; an additional 24V emergency pump has been installed. The truck has low mileage and is otherwise in good working condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38953 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2019, operating hours: 17,349 h, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Operating hours: 17,349 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Itodpfx Aswgnfujfijn Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21/C22 axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21- axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: good (used), Year of construction: 2019, operating hours: 1,994 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Fanuc, controller model: Fanuc 31i-B, spindle speed (max.): 10,000 rpm, number of spindles: 1, mount diameter: 100 mm, Operating hours: 7194 / usage time: 1994 Year of construction: 2019 Control unit: Fanuc 31i-B Spindle: PC100i (10.000 1/min) Tool clamping system: HSK 100 Tool magazine / places (Options): Chain/50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 400, IKZ 70 bar Positioning range XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 X 630 Iodpfxevvmnuj Afietn Workpiece clamping: Hydraulic 80 bar Additonal options, Specifics: HELLER facing slide unit; Receiver for measuring probe (RENISHAW); Coolant temperature control; forward looking collision avoidance; Interface for exhaust system; 3 colour status lamp; work area flush; Scraping conveyor for wet machining; Fast drill fracture sensing (SBBK); multi-spindle-head support (MSK); Thermal growth compensation; Feed force display; Automatic loading sequence; Automatic unloading sequence; increased tool weight 35kg; tool codechip; Since response emails from Maschinensucher often end up in the spam folder, we kindly ask you to regularly check this folder or contact us directly.