Used Okuma Mx 45 Vae for sale (194)

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Itedpex I Nbtjfx Affjr Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 500 mm, TECHNICAL DETAILS X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360° (0.0001°) Spindle speed: 4,500 rpm Spindle bore: 62 mm Chuck diameter: 10 inches MACHINE DETAILS Control: OSP U 100 L Weight: 6,000 kg Ijdpfx Asx I Axrsffjtr EQUIPMENT Driven tools Chip conveyor Transformer Manuals

Condition: ready for operation (used), Year of construction: 2011, Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 22 kW Movement X-Axis Movement 260 mm Z-Axis Movement 1010 mm Y-Axis Movement 120 mm Technical Specification Iodjx Imqfopfx Affstr Driven Tools yes This 3-axis Okuma LB 3000 EX turn-mill centre was manufactured in 2011. It features a maximum turning diameter of 340 mm, a turning length of 950 mm, and a spindle speed up to 5,000 rpm. The machine includes a 12-position tool turret and supports driven tool speeds up to 6,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma LB 3000 EX machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, turning diameter over bed 460 mm Itsdpfx Aoxwp Eboffer turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: ready for operation (used), Okuma OPUS 5000 GHP Power Supply 5000T SN: 00198 , serial no. according to photo ,used, normal signs of wear, 100% functional Ijdpfx Afji Ecarjfotr

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Iodpfx Afox Hx Dnefotr Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle run time: 8,674 h EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Transformer

Condition: used, Year of construction: 2011, machine/vehicle number: 149002, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, controller manufacturer: OSP, controller model: P200, table width: 500 mm, table length: 500 mm, The Okuma MB 5000H 4-axis machine was produced in 2011. It features a robust horizontal machining center design with a 500 x 500 mm pallet, capable of handling a maximum load of 500 kg. The spindle supports speeds from 50 to 15,000 min-¹ with an SK40 taper for increased versatility. Additional features include a chip conveyor, a shower system, and provision for a Renishaw probe. If you're looking for high-quality milling capabilities, consider the Okuma MB 5000H machine we have for sale. Itodpfxsx I Nwns Affor

Condition: excellent (used), Year of construction: 2014, operating hours: 2,050 h, functionality: fully functional, CNC Turning and Milling Center Okuma Multus U4000 2SW 1500 Control: OSP-P 300S-H Year of manufacture: 2014 Spindle hours: 2,050 h Travels: X-axis: 695 mm Y-axis with stroke: +150 / -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Tool holder: HSK 63 Total number of tool stations: 40 Equipment: XA and YA axes with direct absolute measuring system (Okuma ABSO-Scale) In-process measuring with Renishaw probe for X/Z axis Measuring in Y-axis, including inclined-axis measurement mode Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Hollow clamping cylinder Kitagawa F 2596-H01 Ø96 mm Isdpfx Afex I D Ubofstr One-Touch IGF Multi-function tool software Harmonic spindle speed oscillation Simultaneous 5-axis machining software package Chip conveyor Coolant tank with high-pressure pump 70 bar

Year of construction: 2021, condition: ready for operation (used), General Data Machine weight 10000 kg Measurements height 2330 mm Dimensions Machine Length 3530 mm Main Drive Number of axis 5 Spindle Speed 5000 RPM Spindle motor power 22 kW Itedpfox Imriox Affjr Movement X-Axis Movement 270 mm Y-Axis Movement 120 mm This 5-axis Okuma LT 300 MY was manufactured in 2021, featuring a max turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds up to 5,000 RPM and includes a motorized 12-position turret. Ideal for complex turning operations, the machine also offers rapid traverse rates and a substantial distance between centers of 1,200 mm. Consider the opportunity to buy this Okuma LT 300 MY horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2001, functionality: fully functional, We offer this used Okuma LB 400-M CNC lathe, year of manufacture 2001. Itjdpsx Ivgvjfx Affer Manufacturer: Okuma Model: LB 400-M Year of manufacture: 2001 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-100 , serial no. according to photo ,used, normal signs of wear, 100% functional Iodpfoi Ecacjx Affotr

Condition: good (used), Year of construction: 1990, operating hours: 9,200 h, functionality: fully functional, turning diameter over cross slide: 490 mm, turning length: 850 mm, turning diameter: 700 mm, spindle bore: 80 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 330 mm, spindle motor power: 30 W, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,620 mm, total length: 3,995 mm, total width: 2,620 mm, Equipment: documentation/manual, Tailstock Chip conveyor Tool Itsdpfsvga Nyex Affor Control Okuma 5020L Hydraulic chuck Autoblock 500 mm

Year of construction: 2008, condition: used, Manufacturer : OKUMA Model: LB3000EX-MYT Voltage: 380V Phase: 3P (3-Phase) Frequency: 50Hz Average Capacity: 35.5 kVA Full Load: 55 A Max Motor Power Consumption: 215 A Interrupt Capacity: 65 kA Diagram Number: W5201-139-756 Ijdpfx Afouiq N Refetr Find more here - Contact us at -

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Technical data - Travel X- / Y- / Z-axis mm 1,050 / 560 / 460 - Max. Workpiece dimensions mm 1,300 x 560 x 460 - Table dimensions and load mm/kg 1,300 x 560 / 900 Tool spindle - Max. Power kW 22 - Speed range min-1 50 - 15,000 - Max. Torque Nm 199 - Tool system BT40 Ijdpfx Aerif H Tsffstr - Number of tool magazine positions 32 Machine equipment - Preparation for in-process measuring - Hinged belt chip conveyor - 15bar KSS high pressure through the tool spindle Control system - Okuma OSP-P300MA

Condition: good (used), Year of construction: 2012, Datasheet: Travels: Turning length: 1,000 mm Turning diameter: 360 mm X-axis: 260 mm Z-axis: 1,000 mm C-axis: 0.001 degrees Spindle machining diameter: 410 mm Itedpfx Afoq Dpuzsfer Swing over bed: 580 mm Main spindle: Cross section: 80 mm Spindle drive: 22 kW Spindle speed: 5,000 rpm Torque: 427 Nm Weight and dimensions: 6,000 kg LxWxH: 3,000x1,800x2,3000 mm Touchsetter NC tailstock 12-position turret with driven tools Kitagawa B210 chuck Mayfran chip conveyor 8 bar coolant pump

Condition: ready for operation (used), Year of construction: 2016, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: 196691, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP-P300, rotational speed (max.): 6,000 rpm, power: 22 kW (29.91 HP), In good condition Isdpfx Aforx R Iqsfstr

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-102 , serial no. according to photo ,used, normal signs of wear, 100% functional Itodpfx Afji Ecagofer

Condition: excellent (used), functionality: fully functional, CNC lathe OKUMA LR 15 TECHNICAL DATA: Turning diameter over bed max. 450 mm Turning diameter over cross slide max. 240 mm OKUMA OSP5000L-G control Speed range 75 – 4,200 rpm Spindle bore 62 mm 2 turrets: Iodpfx Afev Dgibjfotr - No. 1 (10 places) Z 520 mm X 195 mm - No. 2 (8 places) Z 520 mm X 125 mm Driven tools Operating instructions Machine weight approx. 5,000 kg We believe the machine is in very good condition and can be inspected under power by appointment. Loading included. We will help you organize the transport.

Condition: used, Year of construction: 2006, operating hours: 4,382 h, functionality: fully functional, machine/vehicle number: 127611, turning diameter over cross slide: 340 mm, turning length: 480 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 1,500 W, Equipment: rotational speed infinitely variable, EQUIPMENT - Hydraulic tailstock - Bar feeder 1000 mm TECHNICAL DETAILS Swing diameter over bed: 530 mm Swing diameter over longitudinal slide: 530 mm Swing diameter over cross slide: 410 mm Turning length: 480 mm Turning diameter: 340 mm Spindle speed: 4,500 rpm Spindle Spindle nose type: JIS A2-6 Taper bore: Ø70 (2.75") x 1/10 mm Spindle bore: 62 mm Spindle speed range: 38 - 4,500 rpm Longitudinal slide (Z-axis) Travel: 500 mm Feed rate: 0.001 - 1,000 mm/rev Itjdpfx Aexl Udroffor Rapid traverse: 25,000 mm/min Cross slide (X-axis) Travel: 280 mm [70 + 210] Feed rate: 0.001 - 1,000 mm/rev Rapid traverse: 20,000 mm/min Turret Type: V12 Number of tools: 12 (turning or driven tools) Tool size (external turning tools): 25 x 25 mm Tool size (internal turning tools): 40 mm C-axis Control angle: 360° (increment: 0.001°) Rapid traverse: 200°/min Tailstock & Motors Tailstock quill diameter: 90 mm Tailstock quill travel: 120 mm Main spindle motor: 15/11 kW (20 min / continuous duty) Longitudinal feed motor (Z-axis): 6 kW Cross feed motor (X-axis): 4 kW MACHINE DETAILS Machine height: 2,200 mm Footprint: 2,200 x 1,720 mm Weight: 5,200 kg EQUIPMENT - Hydraulic tailstock - Bar feeder 1000 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Ijdpeu U E Avsfx Affstr Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: used, Year of construction: 2000, functionality: fully functional, OKUMA LU 15M-1000 MM WITH BARFEEDER Maximum Turning Diameter: approx. 360 mm Maximum Turning Length (Z-axis travel): approx. 1000 mm Itodpfxjxur Nwo Affsr Spindle Speed: up to 4,500 rpm X-axis Travel: approx. 260 mm (≈ 10.24″) Z-axis Travel: approx. 640 mm (≈ 25.2″) Power Requirement: approx. 30 kW Machine Weight: approx. 4.8 tons Turrets: Dual turrets (example: upper turret 12 positions, lower turret 8 positions) Live Tooling (M-function): Yes, on the M version

Condition: good (used), Year of construction: 2021, functionality: fully functional, Description: The machine is in good technical condition and can be tested by prior arrangement. Accessories include: tool holders, tailstock centers, 7 driven tools, tool probe. Available for delivery – 03-04/2026. Iedpfx Afex H Ifbjfjtr

Condition: ready for operation (used), Okuma DC Power Supply 6 Axes PCB with E4809-436-002-A, used, normal signs of use, 100% functional Isdpfxji Ecake Affstr

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 5585 mm Measurements depth 3080 mm Measurements height 3280 mm Machine weight 21000 kg Control Unit Model OSP-E100M Brand OKUMA Main Drive Spindle speed range 20000 rpm Iedpfjx D Ib Ijx Affstr Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 900 mm Z-Axis Movement 980 mm Media Internal cooling Yes This Okuma MA-500HA was manufactured in 2004. A robust horizontal machining centre, it features a spacious X-axis travel of 700mm, Y-axis of 900mm, and Z-axis of 980mm. It includes a high-speed spindle capable of 20000 RPM and an efficient through coolant pump. For more information about this horizontal machining centre, please reach out to us. Application Types Milling

Condition: ready for operation (used), Okuma 1006 inverter BLII-D50A Vers.1.2 consisting of board E4809-820-006-A + board E4809-770-069-A, used, normal signs of use, 100% functional, scope of delivery as per photos Iedot Izafepfx Affstr