Used Okuma Mx 45 Vae for sale (235)

Condition: ready for operation (used), Okuma DC-S1A DC power supply for 4 axes, CZ-270C, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Hsdpfx Aji Ecansg Ejfn

Condition: excellent (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OSP200, rotational speed (max.): 8,000 rpm, operating hours of spindle: 5,000 h, number of slots in tool magazine: 32, Equipment: chip conveyor, 8,000 rpm OSP200, Fusion360 IGF Coolant through spindle 4th axis Kitagawa 250mm Available immediately In very good condition Hodpjzzbk Refx Ag Eofn

Year of construction: 2008, operating hours: 16,000 h, condition: good (used), functionality: fully functional, OKUMA SPACE TURN LB3000 EX Lathe Hjdpfjz Aku Iox Ag Ejfn Year: 2008 Control unit: OSP-P200L Maximum workable length*1 (capacity): 500 mm Maximum workable diameter: 400 mm Bar feeder included, Model: IEMCA MASTER 880 33 P/R Chip conveyor with belt Software for gear cutting included, along with the corresponding gear-generating tool (as shown in the attached photo).

Condition: excellent (used), Year of construction: 2012, operating hours: 6,100 h, functionality: fully functional, Control unit: OSP-P200MA-R Table dimensions: 1000 x 460 mm Table load: max. 700 kg X-axis travel: 762 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 15000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 6800 kgs Dimensions (L x W x H): 2810 x 2225 x 2750 mm Accessories / Equipment: - MAYFRAN chip conveyor Hfsdpfsy T I U Aex Ag Ejn - Coolant system - Spindle cooler - Transformer - Mac NAVI - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of supply as per the photos. Hfsdpfx Aoi Ecayeg Ejn

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A, part number E4809-045-086-A / 1911-1509-44-90, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as per photos. Hfodpfx Agei Eca Do Een

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Hfedpfx Aeyu N Uxjg Een

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Hodpfxsz Dgude Ag Esfn Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling center Okuma Multus B300 Control: OSP-P200L Year of manufacture: 2007 Internal machine number: 60 Hodszwl S Ropfx Ag Eofn Travel ranges: X-axis 690 mm Y-axis 230 (-115 to +115) mm Z-axis 1,545 mm B-axis 0.001 ° C-axis 360 ° W-axis: 1,550 mm Max. turning diameter: 710 mm Tool holder: HSK 63 Total number of tool positions: 40 Spindle speed: 38 – 3,800 rpm Equipment / Accessories - Chip conveyor - 3-jaw chuck SMW KNCS-N-260-72 - Compact paper band filter system 500 l - One Touch IGF

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller: OSP-100L, IGF Turning length: 200 mm Turning diameter: 280 mm Sloping bed: No Spindle bore: 62 mm Turret head: Yes, 12 positions VDI 40 Hjdpfx Ajwufc Tog Eefn Travel X-axis: 210+845 mm Travel Z-axis: 360 mm Swing over bed: 320 mm Spindle speed: 40-400/min Main motor power: 15 kW X-axis rapid feed: 60 m/min Z-axis rapid feed: 30 m/min Machine weight: 6000 kg

Condition: good (used), Year of construction: 2007, operating hours: 14,500 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 62 mm, spindle speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 3,200 mm, total width: 2,200 mm, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA LB300MC1000, OSP P200L control, V12 turret VDI40, V12 driven tools VDI40, manual tailstock, chip conveyor, coolant pump, standard spindle 5000 RPM, touch setter, Hsdpfx Ajymfmneg Eefn

Condition: used, Year of construction: 2001, 7-Axis Turning and Milling Center Manufacturer: OKUMA Type: MacTurn 50 Year of manufacture: 2001 Control: OSP-U100L Spiral-circular interpolation Upper Turret HS ATC: X1 = 598 mm Z1 = 1,660 mm Y = 230 mm, +110 mm, -120 mm C = 360/0.001 Hfsdpfxsz D I Ifj Ag Ejn B = 360/1 indexed Turning diameter max.: 610 mm Turning length Z1 min.: 1,500 mm Swinging diameter: 610 mm Turning diameter over cross slide: 580 mm Center distance approx.: 2,000 mm Tool holders: BT50 Driven tool holders BT50 = 40 - 3000 rpm Magazine ATC 72 BT50 For turning: ≈ 36 Driven tool holders: ≈ 36 Lower Turret V8: X2 = 200 mm Z2 = 1,045 mm Turning diameter max.: 380 mm Turning length Z2 = 1,045 mm Swinging diameter = 380 mm Tool holders: VDI40 Turret: 8 positions VDI40 Spindle: Speed range: 14 - 2800 rpm at 37 kW Chuck: D400mm Spindle bore: 110 mm Spindle nose: A2-11 Torque approx.: 2,000 Nm Coolant system with 40 bar pressure New screen New panel Several BT50 tool holders Weight approx.: 20 tons Space requirement L/W/H: 8,000 x 3,500 x 3,500 mm 121026ä

Condition: good (used), Year of construction: 2004, operating hours: 11,287 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 62 mm, spindle speed (max.): 5,200 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Okuma LU300 MC-1000 Hfedpfx Asylpzasg Esn A-turret VDI40 with 12 positions, all driven (M-tools), B-turret VDI40 with 8 positions, Touch Setter for both A & B turrets, manual tailstock, chip conveyor, 8 bar coolant pump, extraction system, Samsys Multi-3000 bar feeder, chucks & tools available as options.

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Hfjdpfx Aszzwmuog Eon Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, Machine type: Horizontal machining center Manufacturer: OKUMA Type: MA-400HA Year of manufacture: 2008 Control system: OSP P200M Country of origin: Japan Delivery time: short-term, by arrangement 4-axis machining center, high productivity, including various accessories Machine equipment: - ConSep chip conveyor system with high-pressure pump - Various software packages - Touchsetter with length measurement and breakage detection - Work area shower Technical details: - Travels - Axes X-axis (column right-left) mm 560 Hfedpfx Agjzm U Ndo Esn Z-axis (table forward-backward) mm 625 Y-axis (spindle up-down) mm 610 B-axis 1° 0 - 360° - Number of pallets: 2 (pallet changer for 2 pallets) - Pallet size (mm): 400 x 400 - Max. pallet load capacity (kg): 400 - Max. pallet workpiece dimensions (mm): 500/600 x 710 - Spindle speed (rpm): 15,000 - Main spindle (10min/cont): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions Optional: - Transport organization and execution - Machine delivery and installation - Machine commissioning

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, table load: 2,500 kg, overall weight: 20,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent; approximately 500 cutting hours; near-new condition • Heavy-duty machining center for high material removal rates • Extremely rigid machine structure • Box guideways on all axes; quadruple box guideway system on Y-axis • Automatic oil lubrication for guideways with machine stop monitoring • Okuma OSP300 control with IGF conversational programming • Parameterized automatic tool collision prevention system • Automatic cutting force, tool load, and spindle torque monitoring • Tool life management and tool usage monitoring • Communication interfaces: USB, PCMCIA, RS-232 • Cutting force: 580 Nm • Chip removal capacity: 540 cm³/min • Spindle speed: 6,000 rpm • Spindle oil cooler • Table size: 2,200 × 850 mm • Rapid traverse: 20,000 mm/min • Tool change time: 0.5 s; chip-to-chip time: 5 s • Machine currently under production; can be inspected under power by an official Okuma technician • Includes documentation: spare parts list, electrical diagrams, programming manual, operation manual • Delivery: Immediate, subject to prior sale Additional equipment • Renishaw tool measuring system Hsdezqcr Iepfx Ag Esfn • Independent Knoll high-pressure coolant system (70 bar) • 30-micron coolant filtration system • LTA mist extraction system • Rear hinge-type chip conveyor • Large set of BT50 tool holders • Transformer Technical Specification Taper Size BT 50

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0210.07382, turning length: 1,000 mm, turning diameter: 350 mm, spindle speed (max.): 3,000 rpm, chuck outer diameter: 315 mm, The Okuma LB 25 is a used CNC inclined-bed lathe, manufactured in 1988, equipped with an Okuma OSP 5020 control. According to the documentation we have, it can handle workpieces up to 1,000 mm in length and has an integrated Okuma Touch Setter. The machine comes with a chip conveyor and oil mist extraction system. It is located in the Düsseldorf area, along with an Okuma LB 15 from 1987. TECHNICAL DATA - Year of manufacture: 1988 - Control: Okuma OSP 5020 - Turning length: 1,000 mm - Turning diameter according to documentation: 350 mm (please verify on the nameplate before purchase) - Chuck diameter according to documentation: 315 mm - Spindle speed max.: 3,000 rpm - Measuring device: Okuma Touch Setter (integrated) EQUIPMENT AND ACCESSORIES - Chip conveyor Knoll 320 S-1 with coolant cleaning - Extraction system Filtermist F21/8 - Tool turret with holders (as shown in the photos) - Turning and clamping tools Hsdpfx Agsz H Ugys Esfn CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For shafts and turned parts up to 1 m in length, suitable for maintenance and contract manufacturing. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading, and transport are organized by the buyer. Upon request, we can provide contact information for freight forwarders in the region. Price upon request. Please contact us via the contact form.

Condition: excellent (used), Year of construction: 2023, CNC turning and milling center Okuma Multus B300 II Control system: OSP-P 300SA Year of manufacture: 2023 Internal machine number: 32 Travel distances: Turning length: 900 mm Maximum turning diameter: 630 mm X-axis: 580 mm Y-axis: 160 mm (+80/-80 mm) Z-axis: 935 mm Hfjdsyk Uhcepfx Ag Esn B-axis: 225° (-30° / +195°; 0.001° increments) C-axis: 360° Tool holder: HSK-A 63 Total number of tool positions: 40 Spindle speed: 50 – 5,000 rpm Accessories: Chip conveyor NC-controlled tailstock, MT5 Touch probe High-pressure pump, 40 bar Renishaw probe prepared 3-jaw chuck Kitagawa B212, Ø304 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, workpiece length (max.): 300 mm, total height: 2,850 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 560 mm, table height: 800 mm, table length: 1,300 mm, overall weight: 8,000 kg, spindle speed (min.): 25 rpm, spindle speed (max.): 15,000 rpm, tool diameter: 125 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MB56 VA Hfjdpfx Agoyq R I Se Een OSP P200M, ATC for 32 tools SK40, chip conveyor, bag filter for internal cooling, 15,000 rpm. Feel free to request our all-inclusive package: loading, transport, installation, commissioning, and service.

Condition: good (used), Year of construction: 2008, functionality: fully functional, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Okuma Multus B300-W 6-axis turning and milling center Hjdpfjyiu Dbsx Ag Ejfn - Okuma OSP P200L - Year of manufacture: 2008 - Cutting time: 13,900 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm - Sub spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry in very good condition - Marpos tool sensor - Chip conveyor & coolant system with small band filter unit - Optionally extensive tool accessories available

Condition: good (used), Year of construction: 2008, functionality: fully functional, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L - Year 2008 - Cutting time: 10,500 h - H1 milling spindle: 6,000 rpm Hsdeyg Rf Nopfx Ag Ejfn - Main spindle: 3,800 rpm, Rota NC 315-86 - Counter spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry: very good - Marpos tool sensor

Condition: used, Technical details: max. turning diameter: 320 mm turning length: 1040 mm control: OSP E 100 L Dialog Fanuc greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm max. workpiecediameter: 525 mm Hfedpfxez Ig Sws Ag Esn Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck SMW 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. *

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Hfodjyvfhdjpfx Ag Eon Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: good (used), Year of construction: 2004, functionality: fully functional, overall weight: 13,500 kg, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Hfodpszt Ihmjfx Ag Ejn Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 69 Turning length: 500 mm Turning diameter: 340 mm Swinging diameter over bed: 530 mm Spindle speed: 4,200 rpm Tool holder: BMT 60 Tool turret, 12 stations (powered) C-axis: 0.001 degrees Equipment: - One-touch IGF - Chip conveyor Hedpfx Agezwlw To Eofn - Touch setter - 3-jaw chuck Kitagawa B-210 - NC tailstock