Used Okuma Lu 45 for sale (229)

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Godpfoyt Nvtsx Ab Doit Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm Gedpfx Absy Aaxrs Djit • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: OKUMA, controller model: OSP E-100M, number of axes: 4, This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Additional equipment • Balluf read/write • Renishaw MP10 • 30 Bar coolant • Mayfran Consept 2000 Machine Benefits Technical Machine Benefits • Nc table (0. 001-degree accuracy) Gisdox D Nlzopfx Ab Det • Atc with 320 places (80 places for 600 mm tools) • Tool breakage control • Mop tool control Extra Information Machine still under power

Condition: good (used), Year of construction: 2004, Opportunity to buy a 5 axis OKUMA machining center with EROWA automation. Including: EROWA Robot Easy automatic loading cell Chip conveyor Heavier coolant pump Higher Spindle speed Automatic measurement system for tool length, diameter setting, and tool breakage detection with a Renishaw laser Automatic measurement function, Renishaw MP10, BT40 Full technical specifications in the attached document. This machine is in very good condition and can be inspected under power upon appointment. Availability: 03/2026 CNC control Okuma OSP-E100M X-axis 762 mm Y axis 460mm Z axis 460mm C axis 360° Table size 400 mm Table load 300 kg Spindle mounting BT40 Big plus spindle Tool changer capacity 32 positions Spindle speed 50-15,000 rpm Spindle hours approx 42000h Gjdpfx Absyfht Us Djit Cutting hours approx. 38000h Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2008, 2008 Okuma LB3000 EX CNC Lathe with Driven Tooling and Okuma OSP-P200L Control Max. turning ø340mm. Max. turning length: 1,000mm. Swing over bed: 580mm. Swing over carriage: 470mm. Spindle bore: ø80mm. Spindle capacity: ø120mm. Spindle speed: 45–5,000 rpm Z-axis: 1,065 mm. Y-axis: 260mm. Turret: 12-station (all driven tooling). Driven tool speed: 45–6,000 rpm. C-axis: 360° indexing. Tailstock: MT5. Spindle motor power: 22 kW. S/No. 141960 (2008) Giodpfx Abey Dr I Ie Djt Machine weight: 6,150 kg. Overall dimensions (L x W x H): 3,500 x 1,900 x 2,000mm. Includes swarf conveyor: Approx. 4,700 x 600 x 1,500mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment valued at €20,000–24,000. * 4-axis machine. * Fully independent programmable tailstock with movement on the Z axis and clamping by M codes. * 12-station turret, all positions powered. * C axis. * Y axis. * Integrated main spindle motor: 18.5 / 22 kW. * Driven tool motor: 5.5 kW. * Motor starting torque: 620 Nm. * Integrated, beltless main spindle drive. * Main spindle nose size: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Spindle chuck: Kitagawa B-210. * Box guideways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Maximum swing diameter: 520 mm. * Maximum machining diameter: 380 mm. * Maximum machining length: 1,050 mm. * Headstock oil chiller. * IGF OSP P200-L conversational automatic programming system. * Automatic load monitoring and tool consumption display. * Parametric automatic anti-collision system for tools. * Tool life management and monitoring system. Gjdpfjy A D Rlex Ab Doit * Rapid traverse speed: 20 and 25 m/min in X and Z axes. * Turret indexing time: 0.2 seconds. * Renishaw automatic tool setting arm. * Communication ports: USB, PCMCIA card, and RS-232. * Dual pedal for main chuck and tailstock open/close. * Side-mounted chip conveyor, hinge-type. * Complete set of external and internal static toolholders. * Full set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operating manuals. * Weight: 6,200 kg. * Machine currently in operation. * Immediate availability unless already sold.

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80-position tool magazine, main spindle with C axis, sub spindle with C axis, Y-axis upper slide/milling spindle, HSK 63 tool holder, infinitely variable B axis as milling spindle, center distance 1500 mm, spindle bore 80 mm, max. swing diameter 550 mm, turning diameter 350 mm, lower turret with 12 stations and driven tools, Interlite compact filter system 900 l, extraction system, spindle operating hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Giodpfx Aoy Atu Teb Dot

Condition: used, Okuma LB400 Gedpoy Apq Refx Ab Dsit

Condition: used, Horizontal machining center, 6 pallets Godpfx Abst Ek Slj Dsit Priced to sell - dismantled and loaded into truck OKUMA MA40 HA 6P OSP U100M CNC 6 pallets 400mm x 400mm max 400 kgs max workpiece dimensions 600*710 Spindle BT40 / coolant through the spindle 4th axis 1° Tool changer: 100 pos. 200 TOOLHOLDERS ARE AVAILABLE X = 560mm, Y = 610mm, Z = 560mm 40 m/min under power Mimu Machine Tools (Italy) X: 560 pallet: 6 Pallet size: 400*400

Condition: good (used), Parts shown by hand not come. Giodjyb R Erepfx Ab Det

Condition: used, OKUMA LB 10 II M is a CNC turning lathe, engineered for precision, high accuracy and reliability. Capacities: swing over cross‑slide 340 mm, over bed 480 mm, max turning Ø 170 mm, spindle hole 51 mm, max length 300 mm, bar passage 42 mm; travels Z350/X150 mm; rapid Z20/X15 m/min. Turret 12 pos., 12 driven tools; C‑axis res. 0.01°; spindle 50–6000 t/min; voltage 3x400 V 50 Hz; weight ~3400 kg; footprint 2000×1640×1780 mm. Accessories: lamp, coolant system, bar feeder, chip conveyor. Enables tight tolerances; suitable for automotive, aerospace, medical, watchmaking and precision machine tool applications. Giedpfx Aboyxnx Ee Dot

Condition: used, OKUMA LB 200 M is a CNC turning lathe for high‑precision machining, accuracy and reliable operation. Capacities: turning Ø over cross‑slide 420 mm; swing over bed 530 mm; spindle hole 53 mm; max Ø 300 mm; travels Z 335 mm, X 180 mm. Specs: rapid traverse X 25 m/min, Z 30 m/min; spindle speeds 50–6000 t/min; 3x400 V 50 Hz; total power 16 kVA; weight ≈3300 kg; dims 2035×1720×1700 mm. Equipment: 12‑position fixed‑tool turret; tailstock Morse 4, spindle stroke 80 mm, Ø 55 mm. Enables tight tolerances; typical sectors: automotive, aerospace, medical, machine building. Gsdpfx Aeyxnxxeb Doit

Condition: used, OKUMA LB 2000 EX is a CNC turning lathe designed for precision, high accuracy and reliability. Capacities: spindle hole 62 mm; max turning length 300 mm; max turning diameter 430 mm; travels Z 350 mm, X 260 mm. Specs: rapid traverse Z 30 m/min, X 25 m/min; stepless spindle 50–6000 t/min; power 50 Hz 3x 400 V; weight ≈3250 kg; dimensions L1900×W1750×H1850 mm. Equipment: 12-position turret. Capable of tight tolerances; typical applications: automotive, aerospace, medical, watchmaking, machine tools. Gedpfx Abjyxnxfo Djit

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Tool Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Giodpfxeyxmyus Ab Dot Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: excellent (used), Year of construction: 2011, CNC Turning and Milling Center Okuma LT 2000 EX – M Control: OSP-P200LA Year of manufacture: 2011 Internal machine no. 23 Swing diameter over bed: 400 mm Distance between centers: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: Z-axis: 700 mm W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001) Equipment: 2 tool turrets, each with 16 stations (all stations driven) Gsdpsyli Akjfx Ab Deit Touch setter IGF Chip conveyor Bar feeder, 3.00 m Main spindle collet chuck Sub spindle 3-jaw chuck Parts catcher Workpiece removal system Extraction unit Coolant system with high-pressure pump and paper band filter system

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Turning length: 750 mm Turning diameter: 430 mm Gjdpfx Aeyk Uimob Djit Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Internal machine no.: 20 Distance between centers or spindle noses: 1085 mm Swing diameter over cross slide / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm W-axis travel: 895 mm Main spindle speed: 45 - 5,000 rpm Gjdpfxoyk Tbho Ab Deit Sub spindle speed: 45 - 6,000 rpm Mounting: BMT 60 Tool turret: V12 (driven) Equipment: Chip conveyor One touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Coolant system HMF-980 with paper band filter Bar feeder / robotics interface prepared

Condition: excellent (used), Year of construction: 2018, CNC Lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Internal machine no.: 19 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Tool holder: BMT 65 Spindle bore: Ø 72 mm Gjdpfxeylhmus Ab Doit Equipment: Chip conveyor Parts catcher Touch setter Programmable sub-spindle One Touch IGF 3-jaw power chuck Kitagawa Various driven and static tools

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller model: OKUMA OSP P200M, total height: 3,150 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 630 mm, table length: 630 mm, rotational speed (max.): 6,000 rpm, overall weight: 22,500 kg, spindle speed (min.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Okuma MA series is a horizontal machining center with large travels for heavy-duty machining. The X/Y/Z travels are 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm. - OSP P200M - Year of manufacture: 2008 - Cutting time: 17,500 h Gisdpfjyg Rb Rsx Ab Dot - Renishaw Tool Eye - ATC 150 SK50 - 2-pallet system - Spindle speed: 6,000 RPM - B-axis NCB 0.001 degree - X/Y/Z 1000/900/1000 mm - Mayfran Consept coolant system with chip conveyor and high-pressure pump 60 bar

Condition: good (used), Year of construction: 2007, operating hours: 14,500 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 62 mm, spindle speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 3,200 mm, total width: 2,200 mm, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA LB300MC1000, OSP P200L control, V12 turret VDI40, V12 driven tools VDI40, manual tailstock, chip conveyor, coolant pump, standard spindle 5000 RPM, touch setter, Gijdeymfmnopfx Ab Dst

Condition: good (used), Year of construction: 2008, functionality: fully functional, Okuma Multus B300-W 6-axis turning and milling center Godpfx Aeyg Rf Njb Deit - Okuma OSP P200L - Year 2008 - Cutting time: 10,500 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm, Rota NC 315-86 - Counter spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry: very good - Marpos tool sensor

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Gjdpfjvta Rkjx Ab Deit

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle speed (min.): 3,200 rpm, total height: 1,700 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 6,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA ES L II-M Year 2002 A small, very compact lathe with extensive capabilities. Control U-10L, parts catcher, touchsetter, V12 turret VDI 30— all driven positions, manual tailstock, chip conveyor, coolant pump, bar feeder Samsys MUS-3000 year 2007, including equipment, SMW chuck KNCS-N210-52, package with jaws and 24 tools optionally available. Gisdpfx Aboyna Uie Djt

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (min.): 5,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS 2x Pallets 500 x 500 mm Travel distances X: 700 mm, Y: 800 mm, Z: 700 mm Table size: 500 mm x 500 mm Rotary table/B-axis: indexed in 1° steps, 360 positions Table load capacity: 800 kg Gisdpfx Asyrgzksb Djt Spindle speed: 5,000 rpm Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Maximum tool length: 450 mm MACHINE DETAILS Control: CNC OSP 100M Dimensions & Weight Machine weight: 21,000 kg Dimensions (L x W x H): 5,500 x 3,160 x 3,300 mm Spindle hours: 18,500 EQUIPMENT Chip conveyor, coolant system, and pocket filter system for internal cooling

Condition: good (used), Year of construction: 1998, functionality: fully functional, OKUMA LCC15, OSP 700L, collet chuck, chip conveyor, coolant pump, touch setter, chip conveyor, parts catcher, V12 turret direct mounting. A very compact and efficient machine for bar stock workpieces. Giedpfx Ajyq S E Sob Djt * The LNS bar feeder is included free of charge with the machine, but it is not part of the sale and must be electronically serviced by an LNS technician.