Used Okuma Lt 10 for sale (167)

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Isdpfxoku Aaaj Afisbc Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller model: OSP-P200M, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 32, TECHNICAL DETAILS X-travel: 762 mm Y-travel: 460 mm Z-travel: 460 mm Control: OSP-P200M Tool magazine: 32 tools X-axis rapid traverse: 40 m/min Y-axis rapid traverse: 40 m/min Z-axis rapid traverse: 32 m/min Isdev Umt Uopfx Afiobc Speed range: 50 – 15,000 rpm Main drive motor: 22 kW MACHINE DETAILS Machine dimensions: approx. 2,850 × 2,810 × 2,750 mm Machine weight: approx. 7,200 kg EQUIPMENT - Chip conveyor - Internal coolant supply - Standard filter system

Condition: good (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 530 mm, turning length: 850 mm, turning diameter: 450 mm, spindle bore: 80 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 330 mm, travel distance Z-axis: 850 mm, spindle motor power: 30,000 W, total height: 1,800 mm, power: 30 kW (40.79 HP), Equipment: documentation/manual, Okuma LB35 II M, OSP 5020LG, tailstock, touch setter, extraction, coolant pump 8 bar, chip conveyor, in good condition in relation to its age, very few spindle hours and very well maintained. Neff The Okuma specialist and NeffBuy Ibedpfxsvta H Es Afioc We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Year of construction: 2008, condition: good (used), functionality: fully functional, Machine is provided free loaded. TECHNICAL DETAILS turning length over bed / saddle: 670 / 480 turning length: max. 750 mm turning diameter: max. 430 mm Bar diameter: max. 102 mm speed: 42 - 4200 rpm travel X / Z: 300 / 840 mm rapid traverse: 30 / 25 m/min spindle power cont. / 30 min: 30 / 22 kW spindle nose: ASA 11 tool holder: 12 places tool size: 25 x 25 mm / 40 mm tool speed: 45 / 6000 rpm MACHINE DETAILS weight: 6700 kg dimensions: 4500 x 1900 x 2320 mm Ibedpfxepgrzcs Afioc EQUIPMENT Chip conveyor tool presetting automatic door opening high pressure pump. 6 bar drive tools and various static tools (see picture)

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 0316, travel distance X-axis: 1,000 mm, Equipment: chip conveyor, Technical information - Okuma MC-600H General information Width: 4358 mm Iedowaw S Dspfx Afijbc Depth: 12141 mm Height: 3310 mm Machine weight: 17700 kg Brand: OKUMA Model: OSP 5020M Main drive Number of spindles: 1 Speed frequency of spindle: 5000 1/min Movement X-AXIS Movement: 1000 mm Y-AXIS Movement: 800 mm Z-AXIS Movement: 750 mm Tools Maximum weight: 25 kg Maximum tool diameter: ISO 50 MM Maximum tool length: 450 mm Media Main electrical connection: 380 V / 50 Hz / 3 P Power consumption: 43 kVA Swarf conveyor: Yes

Year of construction: 2018, operating hours: 1,256 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2189, OKUMA LB3000EX-II - is particularly suitable for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guides and the high-torque drives ensure high precision and continuous accuracy TECHNICAL DETAILS turning diameter over bed: 580 mm Machinable turning diameter: 340 mm workpiece length: 950 mm traverse X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA Iedpont T Aujfx Afisbc rapid traverse X / Z / Y: 25 / 30 / 12,5 m/min riveting stroke: 1015 mm spindle speed: 4200 rpm spindle end piece: JIS A2-8 spindle bore: 91 mm diameter spindle bearing: 140 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm tool change time: 0,1 s Tool speed: 45 - 6000 rpm Operating hours: 1.256 h Control on: 1.660 h MACHINE DETAILS dimensions L x W x H: 3420 x 2041 x 2444 mm weight: 6600 kg Supply voltage: 400 V, 3 phases, 50 Hz Power drawn: 38,9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque: (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hobbing tool holder (see document in the appendix) is not part of the scope of delivery.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 1728, CNC turret lathe Okuma LB15 immediately available The OKUMA LB 15 CNC lathe has been professionally serviced regularly since it was purchased and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret mount for 12 tools. The lathe spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm. Specifications of the OKUMA LB-15 CNC lathe – CNC control: OSP 5000L-G CNC system (German) – Data transmission: RS232 – Tool turret: 12-position type BOLT ON – Lathe chuck: 250 mm – Spindle: 70-3800 rpm. (11 kW, 30 min; 7.5 kW – continuous operation) – non-continuous spindle – Spindle bore diameter: fi 75 mm (at a depth of 70 mm, measured from the face of the lathe chuck and without jaws) – Spindle bore diameter: fi 28 mm (at a depth of 200 mm, measured from the face of the lathe chuck and without jaws) – X-axis travel: 400 x 0.001 mm – Z-axis travel: 500 x 0.001 mm – Cutting speed XZ: 0.01-1000 mm / rev – XZ feed: 12,000 mm / min. – Power supply: 3 x 400V – Machine rated power: 21 kVA – maximum load current: 36A – Machine dimensions (width x depth x height): 2.9 (3.9 m with chip conveyor) x 1.8 x 1.72 m – Machine weight: 4500 kg NC control OKUMA OSP 5000 L-G Iedpfsm Ux A Sjx Afisbc very good repeatability with chip conveyor The machine can be inspected at any time Timely, insured delivery with forwarding agency possible Inexpensive financing / installment purchase possible

Condition: good (used), Year of construction: 2008, functionality: fully functional, Control: OSP-P20L-R Swivel diameter over bed: 450 mm Swivel diameter over longitudinal slide: 350 mm Swivel diameter over cross slide: 300 mm Spindle bore: 43 mm Spindle speed range: 75 - 3,000 rpm Iodpfx Aevk Sqkofijbc X-axis feed: 0.00001 - 39.37 mm mm/rev X-axis rapid traverse: 20 m/min Z-axis feed: 0.00004 - 38.37 mm/rev Z-axis rapid traverse: 25 m/min Tool turret: 12-way Driven tools Tool holder: VDI30 Machine weight: approx. 3,800 kg Bar loader BREUNING IRCO

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, spindle motor power: 22,000 W, spindle speed (min.): 3,800 rpm, spindle bore: 80 mm, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, Okuma Macturn 350 2SW-1500 Big Bore main spindle, machine type CNC turning-milling center Make / manufacturer Okuma Okuma Model / type MacTurn 350 2SW1500 BigBore Year of manufacture 2008 / 2009 Control OSP P 200 L IGF One Touch Advanced + CAS Spindle turning time 6437 h Technical data Max. turning diameter: 550 mm Max. turning length: 1,500 mm Travel path of upper turret (milling spindle): X-axis: 505 mm/190 mm/1670 mm Y-axis: 190 mm (+95 /-95) Z-axis: 1670 mm W-axis: 1680 mm Travel path of lower turret: X/Z 210 mm/ 1670 mm Main spindle “Big Bore” version Spindle motor main spindle 22 kW, 412 Nm Max. speed main spindle 3800 rpm Spindle nose main spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm C-axis 0.001 ° Counter spindle “Super Big Bore” version Spindle motor counter spindle 22 kW, 412 Nm Max. speed counter spindle 3300 rpm Spindle end counter spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm Milling spindle Spindle motor milling spindle: 11 kW Max. speed milling spindle: 12000 rpm Tool holder: HSK 63 B-axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40, Driven tool stations: 12 positions Max. power of driven tools: 7.5 kW Max. speed of driven tools 4500 rpm Machine weight: approx. 15,000 kg Space requirement 6000 x 3500 x 3000 cm Other features - High pressure cooling 40 bar - Chip conveyor Interlit ISF 614 - Heavy crane filter Interlit SBP 4 - Touch Setter - Helical Cutting - 4 Extra M-Code Set - 2x hydraulic power chuck SMW BH-D 315-95 diam. 250 mm - DNC- T1 interface - RS 232 C interface - Chuck blow-off function main counter spindle - TAS -S + TAC-C Status report after commissioning in Bergisch Gladbach Geometry measurement results Reverse play XA - axis 0.015 mm Reverse play XB - axis 0.015 mm Reverse play ZA - axis 0.020 mm Reverse play ZB - axis 0.020 mm Reverse play Y - axis 0.010 mm XA - axis measured with measuring mandrel at 300 mm 0.02, YA at 300 mm 0.007in T1,T2, T3 B-axis: alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no abnormalities Main/counter spindle tested , no abnormalities High pressure pumps function well, no abnormalities Accessories - 2 x hydraulic crane chuck SMW - pallet with 16 driven tool holders, 10 HSK 63 holders, 3 VDI 40 holders - lifting hook on the front - all original axle locks Neff The Okuma specialist and NeffBuy Ibsdpfxevta Rde Afijc We are also happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, rapid traverse Z-axis: 16 m/min, controller model: OKUMA-OSP-HMI, table width: 850 mm, table length: 2,200 mm, table load: 2,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, spindle nose: BT 50, number of spindles: 36, number of slots in tool magazine: 36, tool length: 400 mm, tool diameter: 120 mm, tool weight: 20 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Ijdju Dinkjpfx Afiebc

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 107963, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller model: OSP U100, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Table Max. workpiece dimensions: 1,300 x 560 mm Distance from table surface to spindle nose: 150 – 610 mm Ibsdpfxswh Tfvs Afisc Max. table load: 900 kg Spindle Spindle speed: 15,000 rpm Spindle power: 22 / 18.5 kW Cooling through spindle: 20 bar Feed rates Rapid traverse X/Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Working feed X/Y/Z-axis: 32 m/min Tool magazine Tool capacity: 20 tools Tool holder: BT 40 Tool selection: Memory Random MACHINE DETAILS Footprint: 2,510 x 3,100 mm Machine height: 2,476 mm Machine weight: 7,500 kg EQUIPMENT - Chip conveyor

Year of construction: 2019, operating hours: 1,370 h, condition: excellent (used), functionality: fully functional, OKUMA GENOS L-3000 - for powerful cutting and long tool life for all batch sizes thanks to flat guides and heavy turret design TECHNICAL DETAILS turning diameter over bed: 520 mm Machinable turning diameter: 300 mm workpiece length: 450 mm traverse paths X / Z: 235 / 520 mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA-e rapid traverse X / Z: 25 / 30 m/min riveting stroke: 400 mm spindle speed: 38 - 3800 rpm spindle mounting: A2-8 spindle bore: 80 mm diameter spindle bearing: 120 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm Tool speed: 45 - 4500 rpm switch-on time: 5267 h control time: 1919 h Spindle time: 1370 h MACHINE DETAILS Ibodpent T Afefx Afijc dimensions L x W x H: 2545 x 1870 x 1791 mm Weight: 5000 kg Spindle power (20 min/continuous): 22 / 15 kW Spindle torque: (20 min/continuous): 412 / 281 Nm Tool power (30 min/continuous): 7.0 / 3.3 kW Tool torque (30 min/continuous): 23.7 / 14.2 Nm

Year of construction: 2001, condition: good (used), CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC lathe with robotized loading Description: two-axis X-Z lathe for short workpieces and with a robotized workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Ibodpfjk Hz Iwjx Afisc Spindl: 4500 1/min Coolant system and chip conveyor

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Machine type: CNC lathe Manufacturer: Okuma Type: LU15-M Year of manufacture: 2000 Control: OSP-U100L Country of origin: Japan Ibodpfxjv Id Eze Afisc Delivery time: from stock Long turning length - 1000 mm Towable tailstock - automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment enables this used machine to process long turning lengths of up to 1000 mm. Effective production is also possible thanks to the towable tailstock - automatic, the tool breakage / wear control, the partial hollow clamping device, the K pump and the dialog programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machine equipment Spindle motor VAC built 22/15 kW Long turning length – 1000 mm Towable tailstock – automatic G152 3-jaw chuck Forkardt, diameter 250 mm Steady preparation B-turret Partial hollow clamping device Dialog-IGF K-pump Tool breakage/wear control Chip conveyor Technical data Max. turning diameter: 340 mm Max. turning length: 1000 mm Travel X-axis: upper 260 mm (170+90); lower 140 mm (90+50) Travel Z-axis: upper 1,040 mm; lower 1.015 mm C-axis travel: 360° Spindle – number of travel steps: 2 – automatic Bore diameter: 62 mm A-turret (upper): 12 tools, all M-tool compatible, VDI 40 B-turret (lower): 8 tools, VDI 40 Rotating tool speed: 45~4500 min -1 Rapid feed: m/min X:15, Z:20, C:200 min -1 Tailstock quill diameter: 90 mm Tailstock quill stroke: approx. 100-120 mm Machine dimensions without accessories LxW: approx. 4800 x 2200 mm Machine height: approx. 2030 mm Weight: approx. 6900 kg Optional Transport organization and implementation Machine delivery and installation Machine commissioning and production-ready handover

Condition: used, Year of construction: 2018, operating hours: 4,854 h, functionality: fully functional, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, total height: 2,746 mm, total length: 2,810 mm, total width: 2,210 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, tool length: 300 mm, working range: 1,000 mm, Dear customer, we have an Okuma M460R-VE in very good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff – The Okuma Specialist Team Technical data: Dimensions of the work table (L x W): 1000 x 460 mm Axis travel X/Y/Z: 762/460/460 mm Rapid traverse in the X/Y/Z axis: 40/40/32 m/min Maximum spindle speed: 15000 rpm Minimum spindle speed: 50 rpm Maximum tool length: 300 mm Positioning accuracy of the X, Y and Z axes: ± 0.004 mm Positioning repeatability of the X, Y, Z axes: ± 0.0015 mm Spindle taper: BT 40 Spindle torque: 146-199 Nm Connected load: 37.5 kVA Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2810 x 2210 x 2746 mm Weight of the machine: 6500 kg Equipment of the OKUMA M460R VE milling center: Tool magazine with 32 spaces Metrol tool breakage control Marposs radio measuring probe WRI Small coolant system with additional filter Chip conveyor About us: Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as an instruction and subsequent service. Ibjdpfxevtfkie Afiec We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts. Please visit our homepage for more information.

Condition: used, Year of construction: 1996, Switch-on time: 68743 h Spindle hours: 17338 h Iodpfxjvfucfj Afijbc

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Trimming machine Ibjdpfx Ajtqu U Tofiec