Used Oil Water Separator for sale (16,681)

Condition: new, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 66 db(A) Dimensions L/W/H in mm: L 111 / W 508 /H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH Klsdpfxjpkwaue Ahvjp *Depending on filter equipment Special voltage or special colour on request NEW: Pre-filter system (optional) Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: used, Length: about 400mm, Width: about 400mm, Height: approx. 750mm, Weight: 15kg, Use in compressed air systems Kljdpjh D E Uwefx Ahvjp

Condition: used, Length: about 400mm, Ksdpfoh D E T Dox Ahvslp Width: about 400mm, Height: approx. 750mm, Weight: 15kg, Use in compressed air systems

Year of construction: 2019, condition: new, machine/vehicle number: 1C331151, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10Nominal compressor capacity (referred to 1 bar absolute and 20 °C, depending on compressor type and lubricant): 120 m³/h Connection: G 1/2 Volume of the container: 25 litres Volume of the preadsorber: 0,9 litres Volume of eff. Activated carbon adsorber: 3,2 litres Ksdpfxedbwf So Ahvelp

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 15,000 mm, total height: 2,800 mm, pressure: 8 bar, power: 10.9 kW (14.82 HP), empty load weight: 6,400 kg, input voltage: 400 V, filling weight (min.): 200 g, filling weight (max.): 5,000 g, XFR 1000 Liquid Media Filling Line A fully automated liquid media filling line featuring robotic capping, automated handle placement, dual-sided labelling, optical quality control, and pallet wrapping. An end-to-end solution covering the entire process, from bottle blowing to the palletizing and wrapping of filled bottles. XFR LIQUILOAD It enables optimal filling speeds for bottles of varying characteristics and liquids of different viscosities. The machine’s easy configuration for different bottle types and corresponding liquids ensures quick adaptation to market demands. • Capability to increase the number of nozzles • Nozzles designed to prevent foaming of the liquid Kledpfx Ahouq Nv Tsvop • 800 to 4,000 filled bottles per hour • Servo-driven nozzle positioning • Easy configuration of new programs XFR BOTTLELOCK The machine segment performs fully automated capping of filled bottles. Designed to accommodate various cap types, simplifying machine adjustments for seamless operation. • Cap type adaptability • Robotic bottle capping • Optical inspection • 800 to 2,000 capped bottles per hour XFR HANDLEGRIP The automatic robotic placement of handles on bottles, while they move continuously towards the labeling machine, ensures seamless and uninterrupted operation. • Adaptability to different handle types • Robotic handle application on bottles • Optical inspection for handle orientation verification • Capability to attach handles with a funnel XFR LABELFLOW The machine applies the appropriate labels to both sides of the bottle, creating a finished appearance. In the next phase, the labelled bottles undergo optical inspection. • HERMA labelling system • Simplified label type changeover • Servo-driven for enhanced labeling precision • Monitoring of remaining labels with operator alerts OPTIONAL PARTS: 1. OPTICAL INSPECTION Industrial cameras with integrated lighting and pneumatic ejection system. 2. PICK AND PLACE ROBOT 6-axis robot equipped with a 160 kg gripper for the current handling of 8 bottles onto a Euro pallet. 3. PALLETIZING Palletizer with automatic pallet feeding via a roller conveyor to the bottle stacking area. 4. PALLET WRAPPING The automatic pallet wrapper applies stretch film to palletized products, securing them for easier and safer transport. 5. FINISHED GOODS STORAGE Finished pallets are transported to the warehouse via a metal roller conveyor. 6. REMOTE CUSTOMER SUPPORT We provide remote support to ensure optimal machine performance. 7. ADDITIONAL OPTIONS Automated data integration with ERP systems; RFID login; NFC detection of parts and tools; magnetically mounted tools. 8. MACHINE CONFIGURATION Segments can operate independently or as an integrated solution, depending on the client's specific needs. Proton EE-Elektronika d.o.o. MachinFlex d.o.o.

Year of construction: 2017, condition: new, machine/vehicle number: 1C330966, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10Nominal compressor capacity (referred to 1 bar absolute and 20 °C, depending on compressor type and lubricant): 250 m³/h Kodpfxjdbwf Ie Ahvjlp connection: G 1" Volume of the container: 50 litres Volume of the preadsorber: 3,2 litres Volume of eff. Activated carbon adsorber: 8 litres

Condition: excellent (used), Year of construction: 2005, 1 used hot water boiler ----- - mounted on frame – Type: UT-L 14 Manufacturer: LOOS Output: 1,500 kW Permissible operating pressure: 6.0 bar Test pressure: 9.6 bar Permissible flow temperature: 110°C Water capacity approx.: 1,700 l Year of manufacture: 2005 CE mark: 0085 Equipped with Weishaupt combination burner, type GL8 / 1-D, Oil output 65–191 kg/h, gas output 400–2275 kW and control cabinet. Dimensions (approx.): Diameter incl. insulation: 1,500 mm Kedpfx Ahsyrnhlovolp Height: 2,000 mm Length: 3,400 mm Length with burner: 4,600 mm Shipping weight: 3.5 t

Condition: ready for operation (used), Year of construction: 2015, A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible. Klodpfox Srphjx Ahvop

Year of construction: 1968, condition: good (used), for aluminium Kljdpfx Ajgryk Nshvop strip width: max. 1.050 mm strip thickness: 10 - 20 mic

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm Kjdps A Dimjfx Ahvelp strip thickness: 10 - 20 mic

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Superheated water boiler at 152°C, 1 Gcal/h, automatic feed, year of manufacture 2014 – manufacturer Sceat Italia - Heat output: 1,000,000 kcal/h - Pressure: 4 bar - Superheated water temperature: 152°C - Equipped with control thermostat, safety thermostat, thermometer - Working pressure: 4 atm - Fuel: wood waste, sawdust - Flue gas evacuation system: cyclone, forced draft fan, connection ducting - Furnace: lined with high alumina refractory bricks – prepared for wet materials from processing. Special refractory bricks laid with high alumina content cement, suitable for high humidity – optimized for the combustion of sawdust from log cutting Flue gas extraction system - Belt-driven fan - Multicyclone separator - Connecting ducts: boiler-multicyclone, multicyclone-fan, fan-chimney - Chimney Included accessories - 2 safety valves - Cast iron discharge valve - Operating thermostat - Safety thermostat - Thermometer - Safety pressure switch - Pressure switch guard - Manometer with 3-way valve Klodpfxew Ewafs Ahvjp - Alfa 10 diameter 50 discharge valve Flue gas removal system - Cyclone for collecting solid combustion particles before flue gases are released into the atmosphere - Smoke extractor/fan to improve combustion by increasing draft in the boiler, essential if a smoke treatment system is present or when significant flow losses occur - Painted carbon steel alloy connection ducts between boiler and multicyclone, and between multicyclone and fan - Electrical panel serving the feed electropump, static level, pressure switches, minimum level probe for the smoke extractor fan, and all devices serving the generator - Chimney made of carbon steel

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste Kledpfx Aetywzqohvjp The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: excellent (used), Year of construction: 2007, operating pressure: 6 bar, temperature: 110 °C, tank capacity: 4,210 l, We offer for sale LOOS water boiler with Weishaupt burner Boiler parameters: - Maximum operating pressure: 6 bar - Maximum test pressure: 9.6 bar - Maximum temperature: 110 degrees - Power: 3,500 kW - Capacity: 4210 l - Year of construction 2007 Parameters of Weishaupt Burner RGL 50/2-A Power: 4,500 KW Year of Manufacture: 2007 Kljdpfxer Hynts Ahvop In addition, control cabinet Very good condition

Condition: used, Year of construction: 2021, machine/vehicle number: 70602008, High-performance industrial vacuum evaporator designed for the treatment and volume reduction of industrial wastewater and process liquids. This system uses heat pump technology combined with vacuum evaporation to achieve efficient distillation at low temperatures. Technical Specifications:Capacity (distillate production): approx. 12,000 – 12,700 L / 24 h Technology: Heat pump vacuum evaporation Operating mode: Fully automatic continuous operation with PLC control (Siemens) Refrigerant: R134a Installed power: approx. 114 kW Operating temperature: 35 – 45 °C Distillate temperature: 37 – 47 °C Concentrate temperature: 35 – 45 °C Operating pressure: 6 – 8 kPa (vacuum) Dimensions and Weight Total length: approx. 5600 mm Kjdpfx Ahsyu Sfajvslp Total width: approx. 1500 mm Total height: approx. 3800 mm Weight: approx. 4,000 – 5,000 kg Condition: Used – very low operating hours. EVALED AC R 6 (vacuum evaporator / crystallizer “R” scraped type) is about 6 t/day class. Veolia EVALED AC R6 FF3 Vacuum Evaporator / Crystallizer – Wastewater Treatment

Year of construction: 2007, condition: excellent (used), Description to follow! Kedoyr Siyjpfx Ahvjlp

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid constitutes an obligation for timely collection between 04.05.26 and 07.05.26. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 800 x 230 mm Kljdpjyr R Tdefx Ahvsp Weight: 70 kg External reference: Lot 98

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 04.05.26 and 07.05.26. MACHINE DETAILS Dimensions & Weight Klsdpfx Ahoyr R Stsvop Dimensions (L x W x H): 900 x 800 x 230 mm Weight: 70 kg External reference: Lot 97

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 7,000 h, mileage: 60,000 km, load capacity: 200 kg, lifting height: 21,000 mm, TRUCK MOUNTED PLATFORM Oil & Steel Snake 21.12 Year 2014 Working height 21 m Horizontal outreach 12 m Basket capacity 200 kg Working hours 7.000 km 60.000 All hydraulic controls Good conditions Klsdoyud Ndspfx Ahvep All regular documents

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 5,000 h, mileage: 70,000 km, load capacity: 200 kg, lifting height: 18,000 mm, TRUCK MOUNTED PLATFORMS Oil & Steel scorpion 18.12 Year 2013 Working height 18 m Horizontal outreach 12 m Kodpfx Ahjyudv Djvslp Basket capacity 200 kg Working hours 5.000 km 70.000 All hydraulic controls Good conditions All regular documents

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 7,400 h, mileage: 85,000 km, load capacity: 250 kg, lifting height: 20,000 mm, TRUCK MOUNTED PLATFORMS Oil&Steel 20.10 H Plus Year 2015 Working height 20 m Horizontal outreach 10,2 m Basket capacity 250 kg Kledpjyudugjfx Ahvjp Working hours 7.400 km 85.000 220 volt electric pump motor Good conditions All regular documents

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. Kodeyr H Anjpfx Ahvjlp The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: good (used), Year of construction: 2002, functionality: fully functional, Waterjet Cutting System IR Manufacturer: WATER JET Ingersol Rand Model: OEM 30 Serial number: 0211141 Year of manufacture: 2002 Control system: TH 2030, new and never used Pump has been fully overhauled Kodpfx Ahjyrfg Ejvolp Working area: 3000 x 1500 mm Max. working pressure: 60 KSPI Operating voltage: 400 V Control voltage: 24 V Main fuse: 63 A Rated current: 55 A Frequency: 50 Hz

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Type: CA 220-010 Machine number: 1674938 Year of manufacture: approx. 1985 Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm L/D ratio: 2.65 Screw drive: Cyclo gearbox Connection voltage: 3 phase 400 VAC Connected load: 15 kW Kledpfjyrdlasx Ahvsp If you have any questions or require further information, please send us a message or call us.

Condition: used, Separator element for pallet racking system. Suitable for frames with depths of 1000, 1050, and 1100 mm. Arm length: 500 mm For a 2700 mm bay with 6 arms: 24 pcs – 67 EUR + VAT/piece For a 2700 mm bay with 10 arms: 46 pcs – 89 EUR + VAT/piece For an 1800 mm bay with 7 arms: 4 pcs – 51 EUR + VAT/piece If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking and accessories and are happy to assist you with your planning. Kledpfxok Tzzls Ahvop Further accessories available upon request, including: Frame, corner, and impact protection, push-through protections, chipboard panels, wire mesh decks, rear mesh panels, and depth support bars. Shipping: Please inquire about shipping costs, specifying your postal code, location, and desired quantity. Additional services: Planning, racking assembly/disassembly, purchase/sale Technical data, specifications, and prices are subject to change and errors. Subject to prior sale!

Condition: new, functionality: fully functional, protection type (IP code): IP55, 🔹 General Information Product Type: High Flow Oil Cooler Application: Designed for cooling oil in large machinery Cooling Units: 3 identical condenser units (each can operate separately) 🔹 Technical Specifications Motor: Voltage: 380-420V / 660-720V Speed: 1460 rpm Power: 11 kW Cooling System: Number of Condenser Units: 3 (independent operation) Cooling Type: Oil cooling 🔹 Key Features ✅ High Cooling Capacity – Built for large industrial machines ✅ Independent Operation – Each condenser unit can function separately ✅ Versatile Applications – Can be adapted for different uses ✅ Durable & Heavy-Duty Design – Engineered for continuous operation ✅ Multiple Voltage Compatibility – Works with both 380-420V and 660-720V power sources 🔹 Typical Applications Kodsv Edh Repfx Ahvelp This type of condenser is often used to cool oils in wind turbines Heavy-Duty Industrial Machines – Used in hydraulic systems, power plants, and factories Manufacturing Facilities – Cooling oil in presses, CNC machines, and automated systems Marine & Offshore Equipment – Cooling solutions for ship engines and offshore platforms