Air Oil Separator Filter

Mann Filter 49 002

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Iedpfocnw T Iox Aa Eoaw Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: new, Year of construction: 2025, Holzkraft Dust Extraction System RLA 210 For wood dust and shavings, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of the suction nozzle inlet: 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Maximum sound pressure level: 72 dB(A) Volume Flow Iedjhk Dfropfx Aa Ejaw Nominal volume flow: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum performance in this class Very quiet All models with a collision guard Application Area Designed for commercial use For all woodworking machines with a corresponding suction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily repositioned from left to right, allowing for flexible use Large inspection openings Large-sized, mobile chip containers with a clamping bracket and chip collection bag Dust extractor is completely assembled upon delivery, allowing for quick deployment All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to large filter area Description of the Filter Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life Filter is standard, antistatic, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control box The fan is located downstream of the filter Equipment Details With a novel locking device for secure container positioning Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: excellent (used), functionality: fully functional, filter area: 590 m², volume flow: 70,000 m³/h, total width: 2,450 mm, total length: 9,600 mm, total height: 8,500 mm, compressed air connection: 6 bar, Equipment: documentation/manual, Self-cleaning baghouse filter Airflow capacity: 70,000 m³/h Dimensions: 9600 x 2400 x H 8000 mm (approx.) Number of dust settling zones: 2 Total filter media surface: 590 m² Filter media: antistatic fabric Filter cleaning: reverse air pulse with control via control unit – sequencer Screw conveyor and rotary valve for discharge of filtered dust Iedpfoxfb Nnsx Aa Eeaw Electrical control panel Extraction fans – power to be defined in consultation with user Discharge fan for conveying filtered material into collection system

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200 Model Isdpfx Ajxrdhaea Eoaw The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 3900 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Iajdouc Unqepfx Aa Ejw Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: used, MAS 3-bag dust extractor Motor power: 3 kW Frequency: 50 Hz Current: 7 A Voltage: 380 V Ijdpfx Aey Hq S Rja Ejaw

Condition: excellent (used), ARGUMAT bag filter installed in an asphalt plant Iajdsywct Ijpfx Aa Ejw Year 2014 Motor 90 kW Dismantling not included

Condition: excellent (used), Year of construction: 2018, liter capacity 200 l Iasdpfszczkzjx Aa Ejw feed pressure max. 200 bar coolant capacity 950 l Control Siemens total power requirement 45 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,4 x 1,5 x 2,9 m

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230 with dust filter is a compact, mobile professional dust extractor designed for efficient removal of chips, dust and sawdust in woodworking workshops. The fine dust filter ensures not only strong suction power but also increased filtration efficiency, improving air quality in the workplace. Main advantages of the machine Isdpsycuckjfx Aa Eeaw Performance 1,000 m³/h – ideal for use with medium and small woodworking machines. Dust filter – effectively captures fine particles, including sanding dust. Motor 0.75 kW / 230 V – quiet, energy-efficient operation without the need for three-phase installation. Mobility – four castor wheels allow easy movement around the workshop. Compact design – takes up little space, ideal for small workshops. Design and technology The unit is equipped with a metal chip extraction fan ensuring long service life and reliability. The high-quality dust filter effectively separates fine particles from the air stream, reducing workshop dust levels. The solid, powder-coated housing protects internal components, while the sealed suction system prevents pressure loss. Precision and efficiency The CORMAK FM230 woodworking extractor provides stable and consistent suction. With an output of 1,000 m³/h and low power consumption, it efficiently serves a single woodworking machine without interruptions. The fine particle filter also makes it an excellent dust extractor for sanding applications. Applications Small and medium-sized joinery workshops Craft and production facilities Technical schools and training workshops Home and hobby workshops The FM230 works perfectly with milling machines, planers, jointers, belt sanders and thicknessers. Standard equipment Dust filter Waste collection bag Castor wheels with brake Bag fastening clamp Optional equipment Extraction hose Ø100 mm Suction port reducers Additional set of filter bags Technical data Motor power 0.75 kW Extraction capacity [m³/h] 1,000 Vacuum pressure 1,800 Pa Noise level 70 dB Bag capacity 60 L Number of bags 2 (filter + waste) Suction port diameter 100 mm Dimensions (H × W × L) 1,500 × 420 × 600 mm Power supply 230 V Weight 27 kg

Condition: excellent (used), IMAS 11kW extraction system Main motor power: 11 kW Number of filter bags: 64 pcs Filter bag dimensions: 200x1900 mm Explosion relief flaps Filter bag shaking system Dimensions: 1890x1890x5680 mm Weight: 1150 kg Iaedpfsww Hiaox Aa Ejw