Used Oil Extractor for sale (6,955)

Condition: new, machine/vehicle number: R910936910, Oil pump for Lavatec press. Bwodpfxsy Ugdxj Anmor

Condition: new, Oil meter, conoil. Bwsdjy Ud Nfspfx Anmjr

Condition: good (used), Second-hand machine used in a refrigerator Bsdpfxjvutrwj Anmewr

Year of construction: 2013, operating hours: 17 h, condition: used, The Regloplas temperature control unit is for sale. It was used in a customer's technical laboratory, which explains the low number of operating hours. Bjdpfx Aszkph Ajnmswr Medium: Oil Heating capacity: 6 kW Maximum operating temperature: 150 degrees Cooling capacity: 20 kW

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 4 t, stroke length: 1,200 mm, oil tank capacity: 700 l, total height: 7,480 mm, overall weight: 78,500 kg, year of last overhaul: 2023, Equipment: documentation/manual, Oil-hydraulic forging hammer Lasco type KH 400 YOM 1980 Fully retrofitted and modernized 2023. Bwjdpfjzh Nchex Anmor Work impact: 4,000 mkg Fall height in normal dies: 1,200 mm Ram weight: 3,350 kg Length between the guiding light: 725 mm Ram: 620 mm Motor power: 60 kW Weight of the anvil: 44,000 kg Total weight of the hammer: 78,500 kg Total height of the hammer: 7,480 mm Building height above floor level: 6,260 mm Oil tank capacity: 700 liters Piston rod Length: 500*2800 mm Rubber cushions: 90/2900*120 mm Operating voltage: 380 Volts Control voltage: 220 Volts Slowly ON: 0.62 m/min.

Condition: used, 4-bag dust extractor SIA 8/26 Bwodpfx Anozkh Etsmjr

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2433380060, overall weight: 176 kg, nominal power: 0.75 kW (1.02 HP), rotational speed (max.): 950 rpm, protection type (IP code): IP54, The devices in the COLOUR JET series are optimally designed for extracting paint mist and solvents at wet painting workstations. The front guide plate ensures that the mist is captured from below and at the side inlets, as solvents from paints settle and collect near the floor. At the same time, the guide plate enables uniform air distribution over the filter and protects the filter medium from direct exposure. Paint pigments are separated by the large-area replaceable filter, and the cleaned exhaust air is then discharged to the outside via a pipe or hose. Dimensions (W x D x H) in mm: 1,012 x 1,405 x 943 Bsdpfjzkgwnox Anmswr

Year of construction: 2008, condition: as good as new (ex-display), 3 units, rectangular, insulated steel tanks mounted on double T-rails, with cooling/heating capabilities, manufactured in 2008 – used – (formerly palm oil storage tanks) Capacity approx. 45,400 liters Length approx. 12,000 mm Width approx. 2,400 mm Height approx. 2,900 mm On the tank roof: 1 manhole DN 600 1 socket 2“ 1 socket 3“ 1 outlet flange DN 160 1 socket ½“ Inlet and outlet for heating coil 2“ At the end face: 1 filling pipe DN 80 Bjdpfed Tmcvex Anmswr Insulation: 80 mm mineral wool Otherwise, see drawing + photos.

Condition: good (used), We offer you steel tanks for storing almost all common liquid media. We have all available sizes, from 1,000 liters to 100,000 liters, constantly in stock. No matter how you want your tank to be equipped, we will implement your wishes and comply with official regulations at fair prices. Whether it's an inner lining, 2-component epoxy coating, exterior paint, installation or modification of fittings, DEKRA inspection, loading, and transport – we are the right partner for you. Bwodpjgx E Uhjfx Anmjr

Condition: good (used), 50,000 liter tank, double-walled, cleaned, degassed - Cleaning protocol available - Special size - short design (8.15 m long, 2.90 m diameter, 10.5 t) - with ladder - with platform Bwodpfx Anoq U Slrsmor - Attachments (ventilation, limit value sensor, dipstick, leak detector) - good condition - ready for immediate use... Transportation can be offered as an option. Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

Condition: used, Industrial Extraction Fan, SARA UC 2 SD Serie II Industrial Oil Mist and Emulsion Mist Extraction Unit, Used Machine Overall Dimensions Width: 740 mm Depth: 550 mm Height: 720 mm Bwjdpfxozgiako Anmjr Manufacturer / Distributor H. Sartorius Nachf. GmbH & Co. (Germany) Model SARA UC 2 SD Serie II Technical Specifications Year of Manufacture: 2002 Serial Number: 02-6-338 Power Supply: 3~ 400 V AC / 50 Hz (Three-phase) Rated Current: 1.9 A Power Output: 0.9 kW Motor Speed: 2750 RPM Airflow Capacity: 1000–2000 m³/h

Condition: ready for operation (used), Liquid chiller, Oil chiller, Neslab, used machine Manufacturer : Neslab Type : CFT300 Overall dimensions : 640 x 900 x 1090 mm Electrical data : 400 V, 50 Hz, 10 A Refrigerant : R22 Cooling capacity : 10.6 kW Bwjdpfx Aoyvfrcjnmjr Adjustable temperature range : 5–35 °C Water flow rate : 75.7 l/min

Condition: used, Liquid Cooler, Oil Cooler, Etscheid IK-V7, Used Machine Manufacturer: Etscheid Bodpfx Aneypuc Rjmewr Type: IK-V7 Cooling capacity: 1.8 COP Refrigerant: R134a Electrical data: 400 V; 4.7 kW; 6.5 A Operating pressure: 20 bar Year of manufacture: 2002 Overall dimensions: Length: 900 mm Width: 900 mm Height: 1350 mm Weight: 205 kg

Condition: used, Dust cyclone with rotary valve, dust cyclone 14,400 m³/h,Cyclone system, used machine Year: 2013 Dust Cyclone: HLZ-J 1600 Airflow rate: 14,000 Bm³/h Inlet (suction side): 400 mm Height: 5,853 mm Diameter: 1,695 mm Centrifugal Fan: Ventilatorenfabrik Oelde GmbH Bwjdpfsx U Amiex Anmsr Type: HRV 56N-400/M GL360 Airflow rate: 14,400 m³/h Rated power: 22 kW Rotary Valve: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Capacity per revolution: 58 liters Rotor with 10 fixed rotor blades (cells)

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Manufacturer: IFS Industriefilter Service GmbH Type: IFM 2000 Bjdpfxsyn Rmio Anmowr Overall dimensions: Width: 1170 mm Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm

Condition: used, Spray enclosures, Paint fume, Used equipment Manufacturer: Kematechnik Type: IM-SZ-1,5-4000 Overall dimensions: Width: 1500 mm Depth: 2550 mm Bjdpfx Asw Tt Tvenmswr Height: 2230 mm Year of manufacture: 2017 Airflow capacity: 4000 m³/h Motor power: 2.2 kW

Condition: ready for operation (used), Dust cyclone, dust separator, dust extractor, vacuum cleaner, Used machine Manufacturer: Piovan Type: — Bedpfoxh Ammox Anmswr Overall dimensions: Width: 820 mm Depth: 600 mm Height: 2300 mm Vacuum pump data: Manufacturer: Siemens Type: ELMO-G 2BH1 Power: 4 kW Dust container size: Ø 470 x 340 mm

Condition: ready for operation (used), Local Exhaust Unit, Workplace Extractor, PlymoVent S-1, Used Machine,smoke suction,dust extractor,plymovent Manufacturer: PlymoVent Model: S-1 Bwodsxa Hldjpfx Anmsr Overall Dimensions: Width: 1600 mm Depth: 660 mm Height: 1510 mm Weight: 103 kg Year of Manufacture: 2001 Max. Airflow: 1400 m³/h

Condition: ready for operation (used), Dust collector, cartridge dust filter, dust filter – used machine Manufacturer: Dongguan Jieba Bsdpfx Anjxfkuyjmswr Type: Y3-132S1-2 Overall Dimensions: 1000 × 1030 × 2040 mm Airflow : 1300 m3/h Electrical Data: 5.5 kW, 400 V; 11.1 A

Condition: used, Year of construction: 2010, volume flow: 1,500 m³/h, suction capacity: 1,500 m³/h, Hönag Type 1500 Filter, Extraction, Air Filter, Emulsion Mist Separator Used, as shown in the pictures From stock (may show signs of storage) For further technical information, please refer to the pictures. Scope of delivery as shown in the pictures. With invoice. The invoice will be enclosed with the shipment. Bsdjzkax Eepfx Anmewr Payment method: Bank transfer Self-collection Information about bank details, payment terms, etc., will be sent by email. W117

Condition: used, volume flow: 1,250 m³/h, suction capacity: 1,250 m³/h, Büchel ENF1250 Extraction System, Air Filter, CNC Machine, Emulsion Mist Separator Used, as shown in the pictures. From warehouse stock (may show signs of storage). For further technical information, please refer to the pictures. Scope of supply: as shown in the picture. With invoice. The invoice will be enclosed with the shipment. Payment method: Bank transfer Self-collection Information regarding bank details, payment terms, etc., will be sent to you by email. Bjdpfezkak Uox Anmowr W117

Condition: excellent (used), functionality: fully functional, External dimensions: length 5m x width 3m x height 6m Filtration area: approx. 112 m² Engine power: 11 kW Capacity: approx. 15,000 m³/h Mechanical cleaning of filter bags Bwedpfx Ajzi Rkcjnmer Return channel for cleaned air

Condition: excellent (used), Hertz energy-saving boiler 50 kw Bwedpfoq I Nfhsx Anmer

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter Bwodowwt Tlepfx Anmor 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage Bodpfowwt Aasx Anmjwr - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing - Easy handling: set up, connect, immediately ready for operation at the customer’s site