Used Octopus Grab for sale (1,543)

Condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 350 to 800 mm -Gripping diameter: 2 ranges adjustable, see photos -Dimension: 750/500/H1120 mm Itodpfelyvc Aex Affer -Own weight: 126 kg

Condition: used, Year of construction: 2010, Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle  Iodpfx Afeuca Amefotr

Condition: used, functionality: fully functional, Bruks 1701 M chisel in good working condition Itsdpewiw Uksfx Affor

Condition: new, Year of construction: 2022, Field of application: Construction Itodogfu Nmopfx Affsr CE mark: yes Production country: NL Please contact Kristoff Van Havere for more information

Year of construction: 1984, condition: used, Polyp gripper Itjdecdt Tpspfx Affer 3m³ see type plate

Condition: good (used), Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple -Manufacturer: Atlas, clamshell bucket -Bucket width: 400 mm -Opening width: 1520 mm -Total height: 2190 mm -Mounting bolt: Ø 45 mm, dimensions see photos -Transport dimensions: 1520/500/H1685 mm -Weight: 682 kg Itodpfxetvb Eve Affjr

Condition: used, Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple -Manufacturer: Atlas Weyhausen, clamshell bucket -Bucket width: 610 mm -Filling capacity: 350 liters -Opening width: 1420 mm -Total height: 2080 mm -Mounting bolt: Ø 45 mm, dimensions see photos -Transport dimensions: 1420/610/H1580 mm Itsdpfxjtvb E Dj Affjr -Weight: 697 kg

Condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs Iedpfsix Ay Tjx Affotr -Pipe grab: unfortunately without type designation -Pipe diameter: 610 to 900 mm -Dimension: 1320/670/H1700 mm -Own weight: 287 kg

Condition: used, Hydraulic clamshell grab, hydraulic rotary grab, shell grab, hydraulic grab -Bucket width: 600 mm -Shovel length open: 1400 mm -Total height: 1900 mm Itodjb I Na Uopfx Affsr -Admission inside: 270 mm -Support for bolts: Ø 60/70 mm -Weight: 750 kg

Condition: used, machine/vehicle number: 565, Crane grab, hydraulic clamshell grab, hydraulic rotary grab, shell grab, hydraulic grab Isdpfxsc N N Hvs Affjtr -Bucket width: 695 mm -Shovel length open: 1720 mm -Total height: 750 mm -Recording: 59 x 65 mm -Weight: 293 kg

Year of construction: 1984, condition: ready for operation (used), General Data Machine weight 23000 kg Main Drive Number of axis 3 Movement X-Axis Movement 15900 mm Isdpfx Ajx I S Rqsffotr Z-Axis Movement 790 mm Y-Axis Movement 500 mm This 3-axis GRABENER Single-sided sheet metal edge milling machine was manufactured in 1984. It features a powerful 50 kW DC motor, spindle speeds up to 500 rpm, and a maximum torque of 2,000 Nm. The machine offers extensive travel capabilities with 15,900 mm on the x-axis and rapid traverse rates up to 8,000 mm/min. Ideal for precision milling with a swivel range of +/-45°. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: used, Year of construction: 2003, table length: 2,000 mm, pressing force: 315 t, controller manufacturer: SIEMENS, controller model: S7, CONTROLS .. PLC SIEMENS S7 PRESS DESIGN .. drive system: knuckle-joint .. frame design: H-frame, monoblock .. openings in uprights: yes .. number of suspensions: 2 .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 315 to .. nominal work capacity: 38 kNm PRESS TABLE .. table surface (left-right): 2000 mm .. table surface (front-back): 1200 mm .. thickness of bolster plate: 200 mm SLIDE .. slide force: 315 to .. table surface (left-right): 1995 mm .. table surface (front-back): 1100 mm .. stroke: 160 mm .. stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 140 mm .. stroke rate (min.): 20 /min .. stroke rate (max.): 80 /min .. main drive power: 90 kW Ijdpjx Hu Iijfx Affetr TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 555 mm .. distance between columns (H-frame): 2060 mm .. passline opening (free passage in side columns): 1060 mm OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm COIL CHAIR .. coil weight max.: 4 to DECOILER .. design: single reel, traversable .. sheet width max.: 400 mm .. sheet width (min): 30 mm .. coil weight max.: 4 to .. max. diameter of coil: 1500 mm .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm .. movement: 1500 mm LEVELLER UNIT .. sheet width max.: 400 mm .. sheet width (min): 50 mm .. material cross section max. (450 N/mm2): 1000 mm² .. number of leveller rolls: 9 .. diameter of leveller rolls: 50 mm .. number of infeed-/outfeed rolls: 150 .. feed velocity min.: 5 m/min .. feed velocity max.: 50 m/min STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 45000 kg ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. strip feeder: yes Knucke Joint press for slow movement when approaching BDC Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR control system Tool loading consoles

Condition: new, Year of construction: 2025, 3E Machinery Reifenrecyclinganlage Das 3E Machinery Reifenrecyclingsystem ist eine moderne, modulare Industrielinie zur Aufbereitung gebrauchter Pkw-, Lkw- und Industriereifen in sortenreine Fraktionen wie Gummigranulat, Stahl und Textilfasern. Die Anlage zeichnet sich durch hohe Durchsatzleistung, niedrigen Energieverbrauch und vollständige Einhaltung geltender Umweltstandards aus. Umfassende Technologie zur Reifenverwertung • Das System besteht aus mehreren Verarbeitungsstufen, die eine vollständige Zerkleinerung und Separierung der Materialien gewährleisten: • Vorzerkleinerung und Schreddern kompletter Reifen • Mehrstufige Zerkleinerung in Zwei- und Vierwellen-Schreddern • Granulierung und Feinstvermahlung des Gummis • Magnetische Abtrennung des Stahls • Luft- und Zyklonabscheidung der Textilfasern • Endreinigung und Klassierung des Gummigranulats Dieser Prozess ermöglicht die Herstellung hochwertiger Gummigranulate in verschiedenen Korngrößen (von 30 mm bis hinunter zu 1–4 mm) sowie die Gewinnung von sauberem, wiederverwertbarem Stahl. Anlagenkapazität und Einsatzbereich • Durchsatzleistung: 500 kg/h bis über 10.000 kg/h • Materialien: Pkw-Reifen, Lkw-Reifen, Industriereifen, Vollgummireifen, Reifen mit Drahtverstärkung • Endprodukte: o Gummigranulate (30 mm, 10 mm, 1–4 mm) o Gummipulver o Stahl o Textilfasern • Optional: Schalldämm- und Entstaubungs-Pakete Iedpfxex Aiffo Affjtr Das Anlagenlayout kann individuell an die gewünschte Kapazität sowie die vorhandene Fläche des Kunden angepasst werden. Ihre Vorteile als unser Kunde – Offizieller Europavertreter von 3E Machinery • Direkt ab Werk – keine Zwischenhändleraufschläge. Die Lieferung erfolgt ohne zusätzliche Händler- oder Agentenmargen direkt zu Werkspreisen aus China bei voller Herstellergarantie. • Umfassende technische und kaufmännische Betreuung. Wir analysieren Ihre Anforderungen und konfigurieren die Anlage passgenau in Bezug auf Prozess, Kapazität und Ausstattung. • Begleitung während des gesamten Beschaffungsprozesses: von der ersten Anfrage über die technische Abstimmung, Zahlungsmodalitäten bis zur finalen Vertragsabwicklung mit dem Hersteller. • Unterstützung bei Logistik und Transport. Wir organisieren internationalen Versand, Zollabwicklung sowie die notwendige Dokumentation – für eine reibungslose und zügige Lieferung. • Langjährige Branchenerfahrung im Recyclingsektor. Als etablierter Partner von 3E Machinery in Europa bieten wir fundierte Marktkenntnis und technisches Know-how – für einen effizienten, unkomplizierten Beschaffungsprozess.

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min Ijdpovzxpuefx Affetr distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c - Year of manufacture: 2017 - Technical data: > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) > Pressure resolution: 0.1 kPa > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) Itjdpfxjxt H Hhe Affjr > Precision data: > Repeatability: ±0.3 kPa (0.04 psi) > Reproducibility: ±0.7 kPa (0.10 psi)

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Isdpfjr A Eifex Affstr

Condition: new, Year of construction: 2025, The 3E Machinery tire recycling system is a state-of-the-art, modular industrial line engineered for the efficient processing of used passenger, truck, and industrial tires into clean fractions such as rubber granules, steel, and textile fibers. This installation provides high throughput, low energy consumption, and full compliance with environmental protection standards. Comprehensive Tire Processing Technology • The system comprises several processing stages that guarantee complete material downsizing and separation: • Pre-cutting and primary shredding of whole tires • Multi-stage size reduction with dual-shaft and four-shaft shredders • Granulation and fine milling of rubber • Magnetic separation of steel • Air and cyclone separation of textile fibers • Final purification and classification of rubber granulate This process enables the production of high-quality rubber granules in various sizes (from 30 mm down to 1–4 mm), as well as clean steel suitable for recycling. Iodpfx Aox Aidbeffstr System Throughput and Application Range • Throughput: from 500 kg/h to over 10,000 kg/h • Material types: passenger car tires, truck tires, industrial tires, solid tires, bead-reinforced tires • Final output products: o rubber granules (30 mm, 10 mm, 1–4 mm) o rubber powder o steel o textile fibers • Optional low-noise and low-dust engineering packages available The layout can be customized to match the client's required capacity and available plant space. Why partner with our company – Official European Representative of 3E Machinery • Competitive pricing without intermediary markups. We offer equipment directly from the factory in China, without additional distributor or agent margins, ensuring highly competitive pricing while maintaining full manufacturer quality. • Comprehensive technical and commercial support. Based on client specifications, we select the appropriate line configuration, define process parameters, capacity, and technology scope—ensuring a perfect match for each project. • Full assistance throughout the entire procurement cycle. We support customers from the initial inquiry, through technical discussions, payment terms, and to the conclusion of the final agreement with the manufacturer. • Logistics and transportation support. We assist with organizing international transport, customs clearance, and required documentation so delivery proceeds smoothly and without complications. • Extensive experience in the recycling industry. As a long-standing European representative of 3E Machinery, we provide practical know-how and market expertise that greatly simplifies the purchasing process.

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t Itjdow U Ekpjpfx Affsr dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system

Condition: new, Year of construction: 2025, The 3E Machinery lithium battery recycling system is an advanced, fully integrated technological solution designed for the safe, efficient, and environmentally responsible processing of spent lithium batteries and electrode materials. This line combines state-of-the-art crushing, separation, thermal treatment, and industrial automation technologies, enabling the recovery of valuable raw materials while adhering to the highest safety standards. Comprehensive Resource Recovery Technology The recycling process is based on a sequence of physical and thermal operations, including: • Multi-stage crushing • Gravity and air separation • Precision screening • Drying and low-temperature pyrolysis • Exhaust gas purification • Central dust collection and fully sealed material conveying Depending on the selected process configuration, the system allows recovery of key fractions such as copper, aluminum, separator film, black mass, electrolyte, and additional components. Key System Features 1. Safe and Controlled Crushing • Specialized, patented shredders and crushers engineered for lithium batteries • Capable of processing charged batteries through gas protection technology and multi-level fire prevention systems • Three-stage crushing ensures optimal material liberation 2. High-Efficiency Material Separation • Air separation system with up to 99% efficiency for light and heavy material separation • Combined static and dynamic screening for optimal black mass recovery • Precise gravity separation for copper and aluminum granules 3. Thermal Processing – Drying and Pyrolysis • Drying at 100–150°C with the option of condensing and recovering electrolyte; separator films remain intact for further processing • Low-temperature pyrolysis at 450–600°C effectively removes organic matter and enhances black mass quality • Advanced exhaust treatment with catalytic oxidation, alkaline scrubbing, and activated carbon filtration to meet emission standards 4. Full Automation and Operational Safety • Central control system based on Siemens PLC, compatible with MODBUS TCP/IP, PROFINET, and OPC • Modular design for flexibility, ease of maintenance, and scalable system configuration • Fully enclosed conveying and central dust removal ensure a clean and safe working environment System Capacity and Technical Scope • Processing capacity: 500 to 20,000 tons per year • Installed power: 150–1280 kW Applications: • Spent EV and industrial batteries • Consumer lithium-ion batteries (3C) • Positive and negative electrode sheets Iodpfxoxz Dd Hj Affjtr • Modules, cells, and production scrap Layout: custom-designed to fit client facility requirements Optional Extensions: 3E Machinery also offers complementary systems, including: • Battery pack dismantling lines • Separator film cleaning and recycling lines • Black mass refining and purification systems • Aluminum and steel component recycling solutions Why Choose 3E Machinery Technology? • Over 20 years of expertise in recycling technologies • Proprietary patented equipment, including lithium battery crushers and shredders • High automation level and advanced process safety • Global references with numerous installations in Europe and Asia • Comprehensive support from design through commissioning to after-sales service.

Condition: new, Year of construction: 2025, The 3E Machinery lithium battery recycling system is an advanced, fully integrated technological solution designed for the safe, efficient, and environmentally responsible processing of spent lithium batteries and electrode materials. The line combines state-of-the-art crushing, separation, thermal treatment, and industrial automation technologies, enabling the recovery of valuable raw materials while maintaining the highest safety standards. Comprehensive Resource Recovery Technology The recycling process utilizes a series of physical and thermal operations, including: • Multi-stage crushing • Gravity and air separation • Precision screening • Drying and low-temperature pyrolysis • Exhaust gas purification • Central dust removal and fully sealed material conveying Depending on the selected process configuration, the system enables the recovery of key fractions such as copper, aluminum, separator film, black mass, electrolyte, and additional components. Key System Features 1. Safe and Controlled Crushing • Specialized, patented shredders and crushers specifically designed for lithium batteries • Capable of processing charged batteries thanks to gas protection technology and multi-level fire prevention systems • Three-stage crushing process ensures optimum material liberation 2. High-Efficiency Material Separation • Air separation system with up to 99% efficiency for separating light and heavy fractions • Combined static and dynamic screening for optimal recovery of black mass • Precise gravity separation of copper and aluminum granules 3. Thermal Processing – Drying and Pyrolysis • Drying at 100–150°C with the possibility of recovering condensed electrolyte; separator films remain intact for further processing • Low-temperature pyrolysis at 450–600°C effectively removes organic matter and improves the quality of recovered black mass • Advanced exhaust treatment system utilizing catalytic oxidation, alkaline scrubbing, and activated carbon filtration to meet emission standards 4. Full Automation and Operational Safety • Central control system based on Siemens PLC, compatible with MODBUS TCP/IP, PROFINET, and OPC • Modular design ensures flexibility, easy maintenance, and scalable system configuration • Fully enclosed conveying and central dust removal systems maintain a clean and safe working environment System Capacity and Technical Scope • Processing capacity: 500 to 20,000 tons per year • Installed power: 150–1280 kW Applications: • Spent EV and industrial batteries • Consumer lithium-ion batteries (3C) • Positive and negative electrode sheets • Modules, cells, and production scrap Layout: Custom-designed according to client facility requirements. Itjdsxz A R Espfx Affjr Optional Extensions: • 3E Machinery also offers complementary systems, including: • Battery pack dismantling lines • Separator film cleaning and recycling lines • Black mass refining and purification systems • Aluminum and steel component recycling solutions Why Choose 3E Machinery Technology? • Over 20 years of expertise in recycling technologies • Proprietary patented equipment, including lithium battery crushers and shredders • High level of automation and advanced process safety • Global references with numerous installations across Europe and Asia • Comprehensive support from design to commissioning and after-sales service.

Condition: new, Year of construction: 2025, COMPLETE SHREDDING LINE!!! -loading conveyor to shredder WT -single shaft shredder with hydraulic pusher WT3080 30Kw, rotor length 800mm Itjdpfx Aev I T E Djffor -unloading conveyor from WT and loading to knives mill PC -knives mill PC42100R 45kW, rotor length 1000mm -blower with 5.5kW motor -big bag station for two bags

Condition: new, Year of construction: 2025, COMPLETE SHREDDING LINE!!! we have this line in stock, ready for sale!! -loading conveyor to shredder WT -single shaft shredder with hydraulic pusher WT3080 30kW, rotor length 800mm -unloading conveyor from WT and loading to knives mill PC -knives mill PC42100R 45kW, rotor length 1000mm Itjdpfx Asv I T Ekjffsr -blower with 5.5kW motor -big-bag station for two bags

Condition: new, Year of construction: 2025, COMPLETE SHREDDING LINE!!! we have this line in stock, ready for sale!!! -loading conveyor to shredder WT -single shaft shredder with hydraulic pusher WT3080 30kW, rotor length 800mm -unloading conveyor from WT and loading to knives mill PC -knives mill PC42100R 45kW, rotor length 1000mm -blower with 5.5kW motor Itodpfx Aev I T Dyjffsr -big-bag station for two bags

Condition: new, Year of construction: 2025, Brand/Manufacturer: 3E Machinery Itjdpfx Ajvv S A Dsffer Model: GL32120 Main motor power: 7.5kW + 7.5kW Working rotor length: 800 mm Rotor diameter: 284mm Number of movable knives on the rotor: 40 pcs Thickness of knives: 20mm Machine on stock

Condition: new, Year of construction: 2025, Brand/Manufacturer: 3E Machinery Model: GL32120 Main motor power: 7.5kW + 7.5kW Working rotor length: 800 mm Rotor diameter: 284mm Number of movable knives on the rotor: 40 pcs Thickness of knives: 20mm Machine on stock Itjdpfxovv Szto Affor