Used Nh 5000 for sale (9,911)

Condition: used, Keyence Type: VHX-5000 Psdpfx Adowr Ax Henord Only 10 operating hours! Technical data: Frame rate: 50 F/S (max.) Resolution: Normal: 1600 (H) x 1200 (V) Approx. 1000 TV lines 3CMOS *1, *3: 1600 (H) x 1200 (V) Approx. 1200 TV lines (2 million pixels x 3CMOS mode). Excellent color reproducibility. High Definition*3: 3200 (H) x 2400 (V) Approx. 1600 TV lines Super fine*3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more 18 Megapixel x 3CMOS*2, *3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more (18 million pixels x 3CMOS mode). Excellent color reproducibility. High dynamic range: Each RGB pixel in 16-bit resolution Electronic shutter: Automatic, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 sec. to 4 sec. Adjustable in 0.1 sec. steps. White balance: Push-set, auto, manual, preset (2700 K, 3200 K, 5600 K, 9000 K) LCD monitor*5: Size color LCD (IPS) 23" Panel size 509.184 (H) x 286.416 (V) mm Pixel pitch 0.2652 (H) x 0.2652 (V) mm Number of pixels 1920 (H) x 1080 (V) (FHD) Display color approx. 16.77 million colors *4 Brightness 300 cd/m2 (center 1 point, typical) Contrast ratio 1000:1 (typical) Viewing angle ±89° (typical, horizontal), ±89° (typical, vertical) Approx. 1,680,000 images (if a 2-megapixel image is compressed) up to approx. 55,000 images (if a 2-megapixel image is not compressed) Image format: With compression: JPEG; Without compression: TIFF Maximum image size 20,000 pixels (H) x 20,000 pixels (V) (with image stitching function) Light source: Super bright LED lamp Lamp life 40,000 hours (reference value) Color temperature 5700 K (typical) List of components: VHX-5000 control unit VHX-2000D digital microscope VHX-S90BE Free-angle Observation System base unit VHX-S90F Free-angle Observation System lens holder VH-Z250R Dual-light high-resolution zoom lens 250x - 2500x Condition: used Scope of delivery: (As shown) (Changes and errors in technical data and information excepted!) We are happy to answer further questions by phone.

Condition: new, Year of construction: 2022, power: 35 kW (47.59 HP), Equipment: ABS, all wheel drive, * All-wheel drive * Hydraulics * PTO shaft * Trailer coupling * Roll bar (foldable) ----* Tire dimension VA: 27x10.50-15 * Tire dimension HA: 12.5-20 * Wheelbase: 1750 mm * Tare weight: 1490 kg Predswuzbrspfx Adnsd ----Vehicle number 7334 -----Errors and prior sale reserved

Condition: used, functionality: fully functional, Year of construction: 2025, total length: 2,240 mm, load capacity: 5,000 kg, empty load weight: 200 kg, construction height: 580 mm, construction width: 500 mm, Crane arm Load center: 600 Prodpswri Unjfx Adned Condition: Ready for use and fully functional Technical condition: New Description: Length: min: 2240 mm - max: 3830 mm Length: min: 2240 mm - max: 3830 mm

Condition: refurbished (used), operating hours: 3,700 h, functionality: fully functional, total length: 6,000 mm, total width: 2,500 mm, overall weight: 18,400 kg, year of last overhaul: 2009, The Komptech Crambo 5000 shredder is in perfect condition and has been refurbished in 2009 where it got a new mercedes engine. The Mercedes-Benz V8 engine is 435 PK/320 KW and has 2 turbos, making the machine more fuel efficient and powerful. Prodpfx Adsxyk Agjnsd The engine's working hours are 3700 hours. - The machine includes documentation regarding the inspections and history of the shredder. Additionally included are the schematics of all parts in the shredder and the manual of the engine. - The shredder has a remote control. If there are additional questions or the wish to inspect the machine then feel welcome to contact us.

Year of construction: 1999, condition: used, The Ilpra FS 5000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request. Cup Diameter: 95 mm Outside diameter Filling Range: 50-500 grams Capacity: 4800 cups/Hour Stations: Cup Dispenser -> Filling -> Aluminium Lid Applicator -> Sealing -> Date Stamping -> Out-feed Conveyor Podpfxjxyh R Uj Adnsrd Guarding: Fully Enclosed Cabin Control Panle: Simple Push button Controls Air Requirements: 6 Bar Pressure Electrical Requirements: 400 v / 3 phase / 50 -60 hz Filling Type: Piston Volumetric Filling Hopper: Included Condition: Good Condition Serviced

Condition: used, Year of construction: 2009, There are two of the same machine available, one is a 2008 model and the other is a 2009 model. - Manual lapping diameter: 1.5 – 165 - Automatic lapping diameter: 1.5 – 101 - Travel distance: 6 - 170 [mm] MAIN SPINDLE - Spindle speed: 200 - 3000 [rpm] - Spindle drive power: 4.1 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 10.5 [kVA] Pjdpfsxx Iliex Adnord WEIGHT AND DIMENSIONS - Space requirement: 1,600 x 1,220 [mm] - Machine height: 1,900 [mm] - Machine weight: 1,000 [kg]

Condition: excellent (used), IPG Type: YLS - 5000 Description: IPG Ytterbium laser system YLS-5000-S1T 5 kW laser power Compact footprint Highly efficient ECO modules Compatible with all types of processor heads Prodpstr Ep Nefx Adnjd Independent power control via fieldbus interface Advanced IPG power supply with integrated safety Laser emission ON watchdog Data: YLS-5000-S1T 400-460V AC 3P/PE 50/60Hz 59A 63A/80kA YEAR: 2011 S/N: 11101050 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Prjdpfx Adexxvqaonsd

Condition: used, Year of construction: 2014, clamping force: 270 kN, displacement volume: 653 cm³, injection pressure: 2,041 bar, overall weight: 12,500 kg, load hours: 35,000 h, screw conveyor diameter: 55 mm, Freight basis: ex-site Delivery time: by arrangement Prjdpfxjw U Et Do Adnsd Payment terms: 100% before taking delivery of the machine, net

Condition: used, Year of construction: 2013, The Duplo Bookletmaker System 5000/4000 is a sophisticated and highly efficient finishing solution, designed to streamline booklet production with precision and reliability. Manufactured in 2013 and currently operational in a German printshop, this system is built to handle sheets up to 350 x 500 mm, making it ideal for a wide range of booklet and brochure formats. The system is comprised of two Collorator towers, each featuring 10 compartments (DBM 4000), ensuring smooth and organized sheet collation. It also includes a delivery/offset stacker (DBM 4000) for neat output stacking, and a stitching and folding unit (DBM 5000) for professional booklet assembly. A dedicated pressing plant (DBM 5000) guarantees crisp, flat results, while the integrated trimmer (DBM 5000)???equipped with new blades and updated controls???delivers clean, precise cuts every time. Enhancing operational flexibility, the system features an adjustable kicker/display for customizable interval settings. The DBM 4000 components were built in 2007, while the DBM 5000 units were added in 2013. With each tower boasting 4 million cycles and the trimmer at 2.5 million, this system has proven its durability and performance. Regular maintenance by FKS Hamburg ensures the machine remains in top working condition, ready to meet the demands of high-volume production environments. Format: 350 x 500 mm Equipment: 2 Collorator towers with 10 compartments DBM 4000 1 piece delivery/offset delivery Stacker DBM 4000 1 piece stitching and folding unit DBM 5000 Duplo 1 piece pressing plant DBM 5000 Duplo 1 x Trimmer DBM 5000 Duplo (New blades/new control) Prsdpfx Adexphybsnsd 1 piece Kicker/display adjustable the interwalle D System DBM 4000 built in 2007, System 5000 built i Towers 4 million each, trimmers 2.5 million Maintenance by FKS Hamburg

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, trailer coupling, From our immediately available new vehicle stock, we offer you: TLF 4000/TLF 5000 All-Wheel Drive on all-terrain MAN TGS 18.510 4x4 Chassis Introducing our MAN Mountain Lion! With 510 hp and the all-terrain, single-tired all-wheel chassis, it thrives in demanding environments. Perfect for steep gradients, adverse conditions, and off-road areas far from any road. Chassis: - MAN TGS 18.510 4x4 EURO 6 with 510 hp (375 kW) - Automatic transmission - Single-tire off-road specification for maximum off-road capability Cab: - Standard crew cab (1:5) in RAL 3000 (fire red) - Air conditioning and auxiliary heater - 4 standard SCBA holders in the crew compartment Superstructure: - High-quality modular construction in rust- and corrosion-resistant materials - 4 flexible and spacious equipment compartments per vehicle side - Swing panels for maximum storage capacity - Foldable steps for each lateral equipment compartment - Custom-made stainless steel equipment mountings according to your specifications - Walkable, non-slip vehicle roof Vehicle Pump/Extinguishing Agent Tank: - Maintenance-free combined normal/high-pressure pump FPN 3000-10 - PUMP&ROLL capable - Output of over 3,000 l/min at 10 bar and 400 l/min at 40 bar - Integrated, infinitely adjustable foam proportioning system - Water tank 5,000 l with integrated 500 l foam agent tank - Auxiliary heater in the pump compartment Firefighting Equipment: - High-pressure rapid attack with 50 m form-stable hose - Remote-controlled foam/water monitor on the vehicle roof - Remote-controlled front monitor - Self-protection system with 4 spray nozzles in front of the wheels Safety & Lighting: - LED light bar on the roof / 2 LED front flashers - Additional blue lights on the superstructure - Pneumatic Martin horn special signal system - 100 W PA system with announcement unit - Rear view camera - Comprehensive LED lighting in crew and all equipment compartments - Perimeter LED lighting on the body and auxiliary headlights - Pneumatic LED light mast with remote control - Hygiene board on request Prjdpfx Aexw Rdxjdnjd We would be happy to provide you with a detailed offer and present the vehicle to you in Berlin. All details provided to the best of our knowledge without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, Year of construction: 2007, operating hours: 42,000 h, functionality: fully functional, 2 identical systems consisting of: 1 cloos welding robot romat 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot Gasnozzle sensing, seam tracking, point editor, CTMS, Manax Predpfxow R T Tws Adnod C bow construction for robot in a fixed position Cloos welding machine MC 3 353 ( 350 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: on request . Subject to prior sale. Both systems together will be offered for a special price !!

Condition: excellent (used), Keyence Here we offer you a 3D profilometer. Technical data: Viewing and measuring range: Horizontal: mm 24.0 12.0 8.0 6.0 7.6 3.8 2.5 1.9 Vertical: mm 18,0 9,0 6,0 4,5 5,7 2,9 1,9 1,4 Measuring resolution 0.1 μm : Height measurement: Height measuring range Without image composition in Z : 10 mm 1 mm With image composition in Z : 50 mm 30 mm Repeatability (σ)*1 Without image composition in Z : 0.4 µm With image composition in Z : 1.0 µm Width measurement: Measurement accuracy*1 Without image composition in Z : ±2.5 μm With image composition in Z : ±4.0 μm Repeatability (σ) *1 1 μm 0.5 μm Measurement accuracy*1 ±5 μm ±2 μm XY stroke 184x88mm Psdskvnthspfx Adnerd Z stroke 73mm Incl. VR-5000 control unit + software with licenses Type: VR-5200 + VR-5000 Sale ex location!! Condition: fully functional + no traces of use For more technical information, please contact the manufacturer. Scope of delivery: (As shown) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2022, condition: new, Highlights of our two extraction systems Eco 3000 and Eco 5000 +Solid sheet metal construction ensures ideal flow conditions +resistant wind impeller +constant extraction performance even under constant stress + Connection of up to a maximum of 3/4 machines possible using the supplied distributors +high suction power due to large filter surface (filter dimensions: ø500x1100mm) +Integrated driving device for easy manoeuvring Scope of delivery: Running gear, filter and chip bag, distributor (connection for 3/4xø100mm suction pipes), incl ---- Device available in two designs: *in the following marked with position 1) and 2) 1) Extraction system Eco 3000 - 1.5 kW Prjdjidma Nopfx Adned * with a chip bag and an industrial polyester filter Motor power S1 in W 1500 Installation dimensions in mm 985x560x2250 Extraction capacity in m³/h: 3,000 Suction outlets 3x (ø100mm) Negative pressure in Pa: 2200 2) Extraction system Eco 5000 - 2.2 kW * with two chip bags and two industrial polyester filters Motor power S1 in W 2200 Installation dimensions in mm 1540x560x2270 Extraction capacity in m³/h: 5,000 Suction outlets 4x (ø100mm) Negative pressure in Pa: 2600 --- Information applies to both devices: Sound pressure level in dB(A) < 85 dB Voltage: 400V / 50Hz *Option: also available in 230 V Chip bag diameter in mm: 500 Chip bag length in mm: 850 Delivered in a box for self-assembly in a few steps The filters must be cleaned manually at regular intervals. Surcharge for suction with automatic cleaning + €4,700 net

Condition: good (used), Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 Podeu N Sibepfx Adnerd -Power: 53.5/64.9 kW -Fan: Ziehl-Abegg -Operating pressure: max 16 bar Quantity: 1 piece available -Dimensions: 800/390/H880 mm -Weight: 49 kg

Condition: excellent (used), Year of construction: 2022, Also for direct use on the processing machine. RRP approx. €50,000 Documentation -Laptop including software -Measuring device with table and camera -Measuring probe -Tripod for measuring in the machine or for large workpieces Podpfxov N Dzrj Adnord -Charger including spare battery for measuring probe

Condition: used, mileage: 223,294 km, power: 160 kW (217.54 HP), first registration: 11/2006, overall weight: 11,990 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, gearing type: semi-automatic, emission class: euro3, Equipment: ABS, air conditioning, all wheel drive, crane, parking heater, Unimog U 5000 Double Cab Flatbed with Palfinger Crane! Emission standard: Euro 3 WITHOUT AdBlue Body/Crane: - Flatbed with aluminum drop sides - Palfinger crane PK 10502, year 2006 - Prepared for remote control - 4-point stabilizers - Work and auxiliary lights - Crane not functional, electrical issues Outreach/Lifting capacity: Prjdpfxsxvv Hps Adnsd - 4.1 m = 2,170 kg - 5.6 m = 1,450 kg - 7.6 m = 980 kg Features: - Double cab - 4 doors - Air conditioning - Auxiliary heater - 6 seats - Driver’s air-suspension seat - Passenger individual seat - 4-seat bench in crew cab section - Engine brake - Tyres: 445/70 R24 “MPT” - Differential locks - Towing jaw with full braking system Other details: - German first delivery - One previous owner (utility company) - Engine version Euro 3 with 160 kW - Mercedes-Benz data confirmation available - Vehicle shows signs of use and wear Since 1972, your reliable partner for automotive/commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly stocks approximately 200 vehicles in the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to create a personalized offer for you! Trade-in of your commercial vehicle is possible. If a new TÜV inspection is required, we are happy to provide you with a quote from our partner workshops. Our offers generally do NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged through our external partners for an additional fee. All information in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment may need to be checked separately. Subject to errors and prior sale.

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Prsdpoxvbw Hefx Adnsd Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3.000 ml/min (capillary). Flow rate accuracy: < 0.1 %. Flow rate precision: < 0.1 %. Predpjhh Ibtefx Adnod Gradient dosing accuracy and precision: ± 0.5 % at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 55 lb. (24.1 kg) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used / used Scope of delivery: (See pictures as shown) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, functionality: fully functional, operation weight: 7,100 kg, Year of construction: 1989, operating hours: 3,400 h, Dynapac 5000R asphalt paver Year of manufacture: 1989 3400 operating hours (indicated) Operating weight: 7,100 kg Deutz 3-cylinder engine Paving width: 250 cm Extensions: 2x25 cm for total working width: 300 cm Podpfx Adexvr Ddonord Standard width: 150 cm

Year of construction: 2012, condition: excellent (used), Belt Pasteurizer Steiner Model: TP-1000-5000 Build: 2012 1heating zone up to 95 degrees 3 cooling zones Prsdpjibyqqjfx Adnsd Belt wide 900mm Belt long 5.000mm Infeed height 950mm adjustable Max product height 220mm Steam 70kg/hr (continue) 4 Circulation pumps

Condition: used, Year of construction: 2014, Hydropneumatic operation Profile height: 160 mm below hold-down Max. punching height: 145 mm thanks to 2-way adjustable punch heads Abutment height: 120 mm Pjdpoxta Rgofx Adnord Pressing force: 56 kN at 8 bar Weight: approx. 400 kg

Condition: used, mileage: 52,036 km, power: 130 kW (176.75 HP), first registration: 07/2013, overall weight: 10,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, Internal vehicle number: G300151 German vehicle Available immediately at our premises in Kaufungen - Kassel For more information, contact: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Bucher Schörling CityFant 5000 Sweeper, Mercedes Benz ATEGO 1018, Year of manufacture 2013 - 6,594 operating hours Self-propelled sweeper - Manufacturer: Mercedes Benz Predpfx Adowt Ipaenod - Model: ATEGO 1018 - Configuration: Right-hand drive - First registration: 30.07.2013 - Engine: Diesel with AdBlue - Power output: 130 kW - Transmission: 6-speed - Permissible gross weight: 10.5 t - ABS: Yes - Engine brake: Yes (manual lever) - Driver's seat: Pneumatic - Passenger seat: Single seat - Air conditioning: Yes - Safety equipment including camera system - Electric window lifters right/left: Yes - Side underrun protection left: Yes - Beacons: Yes (two) - Rear axle differential lock: Yes, electrically actuated - Hill-start assist: Yes - Electric exterior mirrors right/left: Yes - Mirror heating: Yes Construction: - Body manufacturer: Bucher Schörling - Model designation: CityFant 5000 - Turbine driven by auxiliary engine - Gross tank volume: 5 m³ - Suction hose boom with rear suction hose: Yes - Body: hydraulically tiltable - Right side brush: Yes - Central brush: Yes - Reverse alarm: Yes, acoustic Permissible gross weight: 10,500 kg Unladen weight: 7,980 kg Financing example: * Internal number: G300151 * Purchase price: €41,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €656.25 * Final instalment: €8,380.00 If you are interested in this offer or would like it tailored to your requirements, please contact Mr. Enchev. We look forward to your call Errors and omissions excepted We are happy to take your used vehicle in part exchange. Financing is available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm Podpexvbu Ejfx Adnerd 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring Head Light Sources Viewing Light Source: LED Ring Light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Viewing and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measurement Resolution 0.1 µm Height Measurement Range Without Z-Compositing Macro Mode: 10 mm Micro Mode: 1 mm With Z-Compositing Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z Pjdjwc Sxdopfx Adnord 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setup Measurable XY area 206 x 104 mm Stage XY travel 184 × 88 mm (motorized) Z travel 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image pickup element 4-megapixel CMOS, B/W Transmitter lens Dual telecentric lens x 2 Receiver lens Dual telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30 °C Relative humidity 20 to 80% RH (no condensation) Weight Approx. 28 kg (weight of the measurement unit only: approx. 11 kg) Distance extension stage Viewing software VR-5000 Version 3.3.5.75 Image composition module VR-H3J Creates a single large image from a series of images captured with the viewing software. You see color images. Analysis Expansion Module VR-H3CA Extends the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as shown) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.