Used Ng 200 for sale (23,405)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Rcsdpfx Ajykub Aehcsf Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: new, functionality: fully functional, power: 320 kW (435.08 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, CONSTMACH PI-1 mobile limestone crusher is a high-performance mobile crushing plant that offers maximum efficiency in crushing materials with low hardness and abrasiveness. Designed specifically for processing materials such as limestone, this plant provides long-lasting use with its durable structure and superior engineering. The PI-1 model combines all equipment, such as the primary impact crusher, vibrating screen, feed and stock belts, on a single mobile chassis, offering a compact and easily transportable solution. With its high production capacity, the PI-1 can crush between 150 and 200 tons of material per hour and can process feed sizes up to 850 x 850 mm. The products obtained thanks to the primary impact crusher have an excellent cubic shape and offer ideal granulometry for concrete production. Three or four different sizes of material can be obtained simultaneously. The PLC-controlled automation system, remote control, and optional diesel generator integration provide full control and independent operation. Thanks to its user-friendly design, the plant can be set up and commissioned in a short time. The hydraulic foot system eliminates the need for an external crane and allows for easy transport from site to site. The use of SIEMENS – SCHNEIDER branded components in all electrical and control systems ensures reliability and long-term performance. PI-1 Mobile Limestone Crushing Plant Technical Specifications Production Capacity: 150–200 tph Maximum Feed Size: 900 x 900 mm Feed Height: 4.5 meters Main Configuration: Primary Impact Crusher + Vibrating Screen Total Motor Power: 320 kW Electric Generator Requirement: 850 kVA Plant Weight: 49 tons Plant Dimensions: 18 (L) x 3.65 (W) x 4.5 (H) meters Chassis Type: Single wheeled chassis equipped with hydraulic opening legs Rcedpfxoxqcrho Ahcsf Why Choose the PI-1 Mobile Limestone Crusher? CONSTMACH PI-1 combines high efficiency, easy transportability, and low operating costs in a single structure. With its European standard production quality, superior automation system, and durable components, it can be used reliably for many years. It provides maximum return on your investment with fast transition between sites, easy maintenance, and low energy consumption. With reliable performance, excellent cubic product quality, and the CONSTMACH guarantee, the PI-1 mobile limestone crusher is your best choice for professional stone crushing solutions. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2026, functionality: fully functional, 7.5 hp 200 mm cutting height 1 hydraulic feed brake Tilts to the left up to 60°, to the right up to 30°, can be tilted from the front using a hand crank When tilted at 45°, the cutting height is 140 mm Swivels to the left up to 60°, to the right up to 45° Cutting length at 90° - 420 mm Cutting length at 45° - 295 mm Length of the outfeed roller conveyor with scale and stop guide on the left - 6000 mm Length of the infeed roller conveyor 2000 mm, mounting side on the right Rjdpfsb Dkyvex Ahcjcf Machine is fully mobile, overall length 9000 mm Can be tilted from the front with a hand crank; the machine is also available with a 215 mm or 240 mm cutting height and other options.

Condition: new, sheet length: 2100sheet thickness: 6,0total power requirements: 11weight approx.: 5500messurements (LxWxH): 3110x2195x1770 Redpfx Aefhlbdjhcocf Our strong brand KK Kletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 6 mm  Cutting length: 3.100 mm Cutting angle: 1,5°  number of hold-downs 15 Backgauge: 1,000 mm via CNC  Motor power: 11 kW  Strokes per minute 15 Projection: 50 mm  Length: 4110 mm  Width: 2195 mm  Height: 1770 mm  Weight: 7000 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 3.900, -  We have many references!

Condition: used, Year of construction: 2001, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI30 - Overhauled 2023 - Year of construction 2001 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm Redpfxjvf I Dis Ahcscf - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 6.8 Nm - DC motor X-axis power: 3.4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2300 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: new, empty load weight: 116 kg, maximum load weight: 634 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,063 mm, loading space height: 320 mm, loading space volume: 0.9 m³, tire size: 155/70 r13, wheelbase: 1,499 mm, color: grey, Year of construction: 2024, Equipment: trailer coupling, SHIPPING ONLY! UT004045 Car trailer Garden Trailer 200 TILT with a tilting drawbar and a maximum permissible total weight of 750 kg. If you want to buy a new car trailer in our shop, you don’t have to worry about documents. The car trailer Garden Trailer 200 TILT is supplied with a tarpaulin in gray, a bow bar and a support wheel. The tarpaulin with the bow bar protects transported goods from rain, snow, wind and sun. This set includes: sturdy bow, waterproof tarpaulin and a round button for attaching the elastic cord. The frame of the trailer with additional cross members represents a very solid construction compared to other trailers. All trailer parts have been galvanized, which provides precise corrosion protection. The twisted design enables a very low total weight and thus a high load capacity. Rcodpfx Aheir H Rlocef During the ordering process, please enter the desired permissible total weight of the trailer in the field "Notes for the shop" (as indicated in the vehicle registration document for light trailers). If you have any further questions, please contact us via online chat or telephone. When ordering a car trailer, please specify the permissible total weight of the vehicle that will tow the trailer. You can find the information on the permissible total weight on the last page of the vehicle registration document. Possible permissible total weight values: 300 kg, 350 kg, 400 kg, 450 kg, 499 kg, 500 kg, 525 kg, 550 kg, 575 kg, 600 kg, 625 kg, 650 kg, 675 kg, 700 kg, 725 kg, 750 kg. Shipping costs will be charged separately.

Condition: refurbished (used), Year of construction: 2002, operating hours: 23,000 h, functionality: fully functional, machine/vehicle number: GSO-1513, total length: 3,840 mm, total width: 1,230 mm, total height: 2,600 mm, type of input current: AC, input voltage: 400 V, feed rate X-axis: -2,000 m/min, working width: 200 mm, warranty duration: 12 months, power: 29.5 kW (40.11 HP), DSG-200 for slat production Machine has been completely overhauled and brought up to date in terms of control technology - this guarantees the supply of spare parts. Very robust machines - feed system is controlled by servo motors. Rcedpfx Aet Hd Enshcjf Machine is equipped with 2 saw frames - transport system channel or side center ruler module Cutting height - 250mm Saw blades, machine and service from Wintersteiger

Condition: good (used), Year of construction: 2014, first registration: 06/2014, fuel type: diesel, color: red, fuel: diesel, Swingo 200 + - 4 wheel steering - Dutch Registration Year of manufacture: 30-6-2014 WSVS462S2E1730012 Redpfx Aexcnynshcocf TZR-38-N = Further information = Intended use: Internal logistics Permissible total weight: 4,500 kg Technical condition: good Visual condition: good Registration number: TZR-38-N Contact VAEX The Truck Traders for more information.

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Made in Germany. Very good condition. Cutting length approx. 1200 mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Front cutting stop with millimeter scale. Two additional sliding stops on the table. Feet-operated material clamp. High knives, in very good condition. Rcedpszv Nl Ssfx Ahcef Weighs over 400 kg

Condition: good (used), Horizon VAC-600Ha + VAC-600Hc + SPF-200a + FC-200a Booklet Making Line The machine is fully operational and ready for production. Very low mileage, with only 1.3 million bindings. Rcedpfx Ahezur Hcjcof This is one of the newest Horizon models. The entire machine is set up from the control panel. Made in Japan. The line consists of: Max size: 350x610mm (with shelf extension) Min size: 120x148mm Max speed: 9500 sets/h Vacuum-air feeding 6 shelves x 2 towers. Stack height: 130mm Weight: 40-350g Power supply: 230V Weight: 325kg/piece The towers are of the latest generation with new compressors (large box), a new type of photocell, and a new wireless remote control. Controlled via a color touchscreen display and a wireless remote control. Jam, double-feed, and misfeed sensors Horizon SPF-200A 10.4″ color touchscreen display Non-stop operation thanks to the mis-collection ejection function Max size: 508x356mm; Min size: 180x120mm Max speed: 4500 booklets/h Weight: 500kg Wire stitching Folding Two Hohner 43/6 s heads (max. 4) Storage capacity: up to 200 jobs in the machine’s memory. Horizon FC-200A Cutting thickness: 4-5mm 230V power supply Weight: 244kg New trimmer design, stable operation with servo motors, and additional booklet guide. The machine includes: LC-200 delivery, PK-20 bundling device, and a jogging table. PJ-77R service tools, spare parts, documentation.

Condition: excellent (used), Year of construction: 2002, 6 axles Rcjdpfx Ahezcvwcscjf Operating hours approx. 50,000 hours.

Condition: excellent (used), Year of construction: 2002, Operating hours: approximately 39,000 hours. Rcedpfx Ahozcvvfjcsf

Condition: good (used), We are offering you a used shelf connector from the manufacturer Jung Heinrich for sale. Technical data for the shelf connector: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Used shelf connector Material color: Sendzimir galvanized Shelf spacing: approx. 200 mm Rcsdpfx Ajd Tt Afohcjf L-profile: approx. 85 x 40 mm Weight/piece: approx. 0.519 kg / piece 04x Hex head screws, M8 x 20 8.8 04x Hex nuts, M8 04x Washers, M8

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Redomhhypjpfx Ahcocf Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Rjdpfjmidyfjx Ahcjcf The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Rjdpjrfucfjfx Ahcocf Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: good (used), Brand: Videojet Type: Inkjet Marking Machine Model: Excel 2000 Redpfxeyt Hmpo Ahcecf

Condition: excellent (used), functionality: fully functional, DEMAG P2000 / P1600 25t Rcjdpfx Ahsv Uvvfocsf Main hoist motor 36/24 K6P 36/20 K6P, fine travel FG 35, wire rope guide, rope drum, drum shell, hoisting gearbox Significantly below manufacturer's list price Top condition Also suitable for P1000 / P1200 P600 P400 P200 Info: We have over 20,000 DEMAG spare parts in stock! Over 20,000 DEMAG spare parts in warehouse! Be sure to check my other offers from stock!

Condition: new, new ! all stainless steel safety lid 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc. Redpszwu D Asfx Ahcecf

Condition: used, 2.000L capacity all stainless steel with stirring system conical bottom Rsdpjzwlrksfx Ahcscf double-jacket (suitable for cooling) with centrifugal pump power : 4 kW dimensions (w x h) : ± 1800 x 3.035 mm

Condition: used, empty load weight: 5,787 kg, maximum load weight: 14,213 kg, overall weight: 20,000 kg, axle configuration: 1 axle, first registration: 05/2025, next inspection (TÜV): 05/2027, suspension: air, tire size: 235/72R17,5, Equipment: ABS, truck registration, | Krone City Liner Profi/1-axle curtain-sided semi-trailer, forced steering | Toolbox | Spare wheel holder, Edscha convertible top | SAF axles with disc brakes | Tare weight: 5,787 kg, payload: 14,213 kg | Tires: 275/70R22.5 | 2000kg tail lift | Loading area length: 11.25m | Subject to errors, input errors, and prior sale. Rcodpfxjzv U R Ho Ahcjf

Condition: excellent (used), For sale: KSB ETABLOC G 32-200/752 centrifugal pump with electric motor. The pump has been inspected and is in fully working condition. It features a robust industrial design from the renowned manufacturer KSB, and is suitable for water, circulation, and various industrial applications. Technical data: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 32-200/752 No.: 0-118-902 133 Flow rate Q: 10–37 m³/h Head H: 57–34 m Rotational speed: 2950 rpm Motor power: 7.5 kW Voltage: 380 V Current: 14.2 A cos φ: 0.91 Frequency: 50 Hz Protection class: IP54 Insulation class: B Motor: three-phase Motor type: ZKA 132 S-2 Connections: flanged Condition: used, inspected, and in fully working condition. It has normal signs of use and storage, as visible in the photos. Rcodezvzvijpfx Ahcsf The item for sale is a complete KSB pump with an electric motor, exactly as shown in the photos.

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Motor data: Rjdozvzu Eopfx Ahcscf Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Power: 11 kW Connections: flanged Technical data of the electric motor: Rcsdpfxozvyw Ee Ahcof Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: B Operating mode: S1 Mounting form: B3/B5 Condition: Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: excellent (used), For sale: KSB ETABLOC G 40-200/1102 G4 centrifugal pump with an 11 kW electric motor. The pump is used, inspected, and in fully working condition. It was checked before being listed for sale. The visual condition corresponds to the photos – normal signs of use and storage are visible. Pump specifications: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 40-200/1102 G4 Flow rate Q: 20–60 m³/h Rsdpfozvymgjx Ahcjcf Head H: 57–35 m Rotational speed: 2900 rpm Serial No.: 5-118-547 043/1 Motor specifications: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: ZKA 160 MK2 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2880 rpm cos φ: 0.9 Serial No.: 0-118-886321 Ident-No.: 00533537 Motor No.: 544077 Condition: used – inspected – 100% functional. This is the exact unit shown in the photos that is being sold.