Used Newton 25 for sale (39,476)

Condition: used, mileage: 1,001 km, first registration: 01/2002, color: red, driver cabin: other, gearing type: other, Year of construction: 2002, Equipment: cable winch, central locking, crane, Vehicle location: Bovenden, crane behind house, emergency stop, foldable, 2-point hydraulic outriggers, radio remote control, 5xhydr. extensions, cable winch Hnsdpslp Rpfofx Ah Njg Superstructure: Fassi F230AXP.25 with cable winch & radio Ex-Swiss Army! Hardly used! Load diagram: 2m-9100kg, 4,55m-4175kg, 6,35m-2830kg, 8,25m-2060kg, 10,30m-1570kg, 12,35m-1210kg, 14,35m-1000kg. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, working height: 520 mm, input voltage: 400 V, overall weight: 4,500 kg, load capacity: 150 kg, type of input current: AC, power: 12 kW (16.32 HP), Lisec sealing robot VFL-1DS/25, year 2001, working direction left/right, consisting of following: - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, - DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001, completely overhaule prior delivery The machine is still working and can be seen in production on appointment. Will be sold as described above, EXW our client's factory in Germany. No further guarantee or warranty given. Hnjdpfewuri Tsx Ah Nog Available February 2026

Condition: used, Year of construction: 1980, pressure 200 t chamfer lenght 3000 mm distance between columns 2560 mm dayligth 450 mm throat 450 mm adjustment of stroke 240 mm horn length over column outer edge each 175 mm table length 3050 mm table width 280 mm table height over floor 820 mm electrics - voltage/frequency 220/50 V/Hz control CYBELEC, DNC60 stroke 250 mm operating pressure 150 bar weight of the machine ca. 15 t dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC 60 • lower part of the machine moves down 500 mm to the floor, • at the moment the machine is mounted on a double-T-support; Hedpot Hllpefx Ah Njng • prism and upper part of the machine in 3000 mm length

Year of construction: 1973, condition: used, Great condition. 900 nails per minute. Minimum diameter of wire 0.7 mm Maximum diameter of wire 1.4 mm Minimum length of nail 6 mm Hnjdsfy Uwdopfx Ah Neg Maximum length of nail 25 mm Oil consumption 0.1l/ 8 hours Total weight 540 Kg

Condition: used, Year of construction: 2023, for Iromat normal sprinkler / Hsdet Ebinepfx Ah Njng

Condition: used, mileage: 26,000 km, power: 206 kW (280.08 HP), first registration: 09/2001, fuel type: diesel, empty load weight: 9,000 kg, maximum load weight: 9,000 kg, overall weight: 18,000 kg, tire size: 315/60R22,5, axle configuration: 6x2, wheelbase: 4,200 mm, next inspection (TÜV): 03/2023, brakes: retarder, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: air, number of seats: 2, Equipment: ABS, additional headlights, cabin, differential lock, fog lights, low noise, power assisted steering, seat heater, Vehicle location: Bovenden, registration number house, 1x comfort seat, seat heating, rear window, ABS (anti-lock braking system), retarder, power take-off, automatic, lifting+lowering, differential lock, fog lights, work lights, rotating beacon, air suspension, low-noise G1, last axle hydr. steered, side aluminum driving protection, roof hatch, environmental badge red Wheelbase: 4200 mm Body: For bodies up to approx. 6300 mm Can be loaded up to 25 tons! Gearbox 5HP-590 automatic, 6-cylinder engine, K-cab! Power take-off: ZF for HP automatic transmission, engine-dependent, output speed = 0.97 x engine speed, direction of rotation left (like engine), max. 700 Nm, suitable for continuous operation, installation position top right, direct pump drive, output flange 120 mm diameter (8-hole)! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hnodpfjvhi T Dox Ah Nsg - .

Condition: used, mileage: 17,500 km, power: 159 kW (216.18 HP), first registration: 12/1987, fuel type: diesel, empty load weight: 7,600 kg, maximum load weight: 4,400 kg, overall weight: 12,000 kg, tire size: 10R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 9, Equipment: ABS, cabin, differential lock, fog lights, trailer coupling, Vehicle location: Bovenden, Doka, 1x air seat, switch 5, ABS (anti-lock braking system), power take-off, differential lock, fog lights, rotating beacon, storage box, leaf suspension, trailer hitch Wheelbase: 3600 mm Body: TLF16/25 tank fire-fighting vehicle, built-in pump FP 16/8 & 2500l water tank Body length approx. 3700mm! Spare wheel available for an extra charge! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hnjdevhknvopfx Ah Neg - .

Condition: used, mileage: 24,833 km, power: 124 kW (168.59 HP), first registration: 12/1972, fuel type: diesel, empty load weight: 5,785 kg, maximum load weight: 5,215 kg, overall weight: 11,000 kg, tire size: 8.25-20, axle configuration: 4x2, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 9, Equipment: additional headlights, cabin, Vehicle location: Bovenden, Doka, switch 5, rotating beacon, storage box, leaf suspension Wheelbase: 3600 mm Body: Ziegler TLF 16/25 water tender with FP 16/8 built-in pump & 2500l water tank Sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Hodpfx Ahevhkkke Neng

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 11,746 h, load capacity: 2,500 kg, lifting height: 3,680 mm, construction height: 2,300 mm, overall weight: 3,820 kg, Equipment: sideshift, TECHNICAL DETAILS Hsdpfx Ahsx E Tdye Neng Load capacity: 2,500 kg Lift height: 3,680 mm Overall height: 2,300 mm Fork length: 1,100 mm MACHINE DETAILS Drive type: 4-cylinder LPG engine Front tires: 7.00-12 (70%) Rear tires: 6.00-9 (60%) Weight: 3,820 kg Operating hours: 11,746 h EQUIPMENT 3rd valve Front work lights Side shift

Condition: used, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 2,200 mm, fuel type: electric, mast type: triplex, construction height: 2,950 mm, Still RX60-25 electric forklift truck Year of construction 2017 Hsdjv Hhcnspfx Ah Nong Operating hours read approx. 5550 Overall height 2940mm Lifting height 6000mm Triplex mast with free lift approx. 2200mm Fork length 1000mm Battery from 2017 Residual capacity 88% FEM 4.004 test new on sale The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Max. Sheet thickness: 8 mm Hnedpfx Ajtvfzcsh Njg Weight, approx.: 6400 kg

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping Hedpfxoifn N Ne Ah Nong - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: used, Electric Forklift Truck OM PIMESPO Type XE 25 ac Counterbalance forklift, electric forklift, compact forklift Serial No. SES23X9-10 – Manufacturer No. F14024W00609 Year of manufacture 2008 Rated capacity 2500 kg Capacity at 500 mm load centre 2500 kg Lift height 4340 mm Overall height 2220 mm (container compatible) Mast height 2220 mm Free lift 1600 mm Fork length 1150 mm Fork width 100 mm Fork thickness 40 mm (actual 38 mm - at heel 35 mm) Fork carriage width 1030 mm Operating voltage 80 Volt - 4-wheel, superelastic, solid rubber tires front 23x9-10 / rear 18x7-8 - Hydraulic power steering - Triplex free lift mast - Sideshift - Overhead guard - Drive battery HAWKER, 80 Volt, 560 Ah, year of manufacture 12/2022, supplied with automatic charger Hedpfx Ajt Ac Ersh Nong - Operating hours counter shows 2969 hours - New UVV safety inspection by TÜV (additional cost 150,-- EUR net) Length without forks 2400 mm Overall width 1190 mm Own weight with battery 4800 kg Good condition

Condition: used, Year of construction: 1990, pressure 25 t total power requirement 4 kW 200 mm inward space Hedpfx Ahjxzk S Do Njng

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Hnodpfx Ahjx Uyzqj Nog 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 6,166 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: diesel, mast type: telescopic, construction height: 2,525 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel Forklift Load Centre: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Telescopic Transmission: Electromechanical Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Size: 23x9-10 Rear Tyres Type: Superelastic Rear Tyres Size: 21x8-9 Description: In addition to this machine, we offer further forklifts and warehouse equipment. All our machines are workshop-inspected and comply with FEM 4.004 regulations. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not acquire a vehicle from us. Hire purchase and financing under attractive conditions are available on request. We are pleased to offer you professional and comprehensive advice on our vehicles. Side shifter, fork positioner, Hsdpfxexybcqe Ah Neng 3rd valve, 4th valve, rear work lights, front work lights, heater, soot filter, fully enclosed cab, safety light, interior mirror, joystick, rotating beacon, windscreen wiper, single pedal, LED, seat,

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 380 h, load capacity: 2,500 kg, lifting height: 3,300 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,145 mm, fork length: 1,200 mm, empty load weight: 4,200 kg, total length: 2,700 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift truck Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Hedewti Epjpfx Ah Nong Technical condition: very good Front tyre type: superelastic Front tyre condition: 100% Rear tyre type: superelastic Rear tyre condition: 100% Description: Factory-refurbished used unit including new inspection and new approval according to FEM (formerly UVV). Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, overhead guard, front windscreen, heater, full cabin, full free lift, CE certificate, safety light, opening range 350–1050 mm

Condition: used, Double valve Rexroth 4WRKE 25 Hsdpfjx Uqxyjx Ah Njng

Condition: new, bending length: 2600sheet thickness: 6upper roll diameter: 190 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings Hnedpfx Aox Twiijh Njg - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 working length 2550 mm Hjdpfx Ahoq Awh Rj Nong output 2000 KN tracking travel 13 mm safety distance 176 mm

Condition: used, Year of construction: 2009, operating hours: 3,867 h, 2009 | Haulotte H 25 Tpx (25m) | Used Telescopic Boom Lift | 3867 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 51 inspection points 46 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ Hnodpfx Ahjx Urm Ee Nsg 📌 Inspector's Comment: Good general condition of the Platform, the hood fastenings are damaged. Presence of oxidation and aging paint. The rubber of the knots is partially torn. Presence of play in the rotation of the basket. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40208 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Hodpfx Ajx Twdysh Neng

Condition: ready for operation (used), Press force: 250 t greatest working length: 4050 mm equipped with CYBELEC DNC 70 PSG control Hnjdpfxsx Tr Uge Ah Njg

Condition: new, The TSB 25 is a versatile Column Drilling Machine that offers impressive performance and compact dimensions, making it an ideal choice for any workshop, whether in steel construction or repair. As part of the KNUTH TSB bench drill series, this machine features a robust main spindle gearbox that provides high torque along with a wide speed range, accommodating various drilling tasks with ease. With a drilling capacity of 25 mm, a throat of 240 mm, and a spindle speed range of 125 to 2825 rpm, the TSB 25 is designed for efficiency. The swivel drill head allows for angled drilling, while the height-adjustable machine head ensures optimal usability. Additionally, standard equipment includes a base, protective shield, LED work lamp, and drill chuck, which enhance safety and convenience during operation. For those looking for a reliable and powerful Column Drilling Machine, the TSB 25 is an excellent choice. Request a quote today to learn more about this robust addition to your workshop. Hnjdpfsqa Au Tox Ah Nsg

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation Hjdovuudnopfx Ah Nong as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request