Used Newton 20 for sale (28,845)

Condition: used, machine/vehicle number: 516223V00900, Year of construction: 2019, operating hours: 4,777 h, load capacity: 1,800 kg, lifting height: 4,500 mm, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 4,500 mm MACHINE DETAILS Mast design: Triplex mast with full free lift Drive type: Electric Battery year of manufacture: 2019 Battery voltage: 48 V Battery capacity: 625 Ah Measured idle voltage: 50.83 V Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,150 x 2,060 mm Own weight: 3,400 kg Service valid until: 10/2027 UVV inspection valid until: 10/2027 Operating hours: 4,777 h EQUIPMENT Former Still full-service unit Battery charger Fork positioner with side shift Side fall protection Dodpfxj Ahrcae Alfswd LED work light at the rear Orange warning light Comfort seat with lumbar support Seat heating Hydraulic valves: 3rd and 4th valve Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not done on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 219

Condition: used, mileage: 436,340 km, power: 206 kW (280.08 HP), first registration: 12/2015, fuel type: diesel, number of seats: 45, gearing type: automatic, next inspection (TÜV): 06/2027, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typographical errors, and prior sale: MAN Lions City UE A20, 45+44+1 + 2 emergency seats (Vehicle 80) Dsdpfez E Abisx Alfjwd First registration: 16.12.2015 436,340 km Engine: 10,518 cc 205 kW / 279 hp Euro 6 MOT valid until 12/2026, technical inspection valid until 06/2027 Permissible total weight 19,500 kg, unladen weight 11,687 kg, payload 7,813 kg Overall length 11,980 mm x overall width 2,500 mm x overall height 2,985 mm Single door at the front, double door at the rear Driver's cab with door 45+44+1+2 emergency seats Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave oven 2 x electric mirrors + mirror heating 12-volt socket Emergency stop Stop brake Driver's seat ISRI with heating and ventilation Lawo system connected to the cash register Tires 275/70R22.5, front approximately 60%, rear approximately 30/40% 26.03.2024: New oil filler pipe 09.12.2024: New upper axle strut on the right rear axle, new engine mount on the left, new V-ribbed belt for the generator 09.12.2024: New brake cam on the right front axle, brake caliper on the left front axle overhauled, new brake caliper on the left rear axle 10.12.2024: New pressure limiting valve next to the gearbox New tie rod 03.06.2025: New engine mount on the left 15.12.2025: New engine mount on the left Various signs of wear and tear, consistent with the age Good overall condition Last inspection at 428,444 km on 03.03.2026, next inspection at 498,464 km Price: €30,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the district court of Ludwigslust for disputes up to a value of €10,000. For disputes exceeding this value, the regional court of Schwerin is the competent court. Errors, typographical errors, and prior sale are subject to change.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,443 h, load capacity: 2,000 kg, fuel type: electric, battery capacity: 250 Ah, battery voltage: 24 V, fork length: 1,200 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 644 kg, total length: 1,800 mm, total width: 720 mm, fuel: electricity, STILL EXU - H 20 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.000 kg Fork length: 1.200 mm Drive: Elektro 24V Battery: 24 V 250 Ah v. 12/2016 Charger: ohne/without Dedpfx Aloz Aqf Tsfswd Tyres: Polyurethan Tandem Service weight: 644 kg Length: 1.800 mm Width: 720 mm Year of manufacture: 2017 Operating hours: 3.443 h Condition: working condition Internal no.: 1309239 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 1,948 h, load capacity: 227 kg, lifting height: 11,140 mm, empty load weight: 6,615 kg, construction height: 2,080 mm, fuel type: electric, Telescopic articulated boom lift GENIE Z30/20N Year of manufacture: 2006 According to the hour meter: 1,948 operating hours 11.14 meters working height 9.14 meters platform height 6.53 meters lateral reach 227 kg payload 6,615 kg total weight - Telescopic boom - Articulated boom - White tires - Integrated charger - 48V - Ready for immediate use - Well-maintained machine - Upon request: new Austrian inspection certificate provided before delivery! Selling price: €6,600 net Affordable delivery also possible! Dwedpez Du Iljfx Alfjd

Condition: used, functionality: fully functional, We offer 20-foot bulk containers. A 20-foot bulk container is a standard ISO container that has been modified for the transport of free-flowing bulk goods. It has loading hatches in the roof and discharge flaps at the end. This allows it to be filled from the top and emptied by tilting, without the need to package the goods in bags. It is particularly suitable for grain, seeds, and similar dry bulk goods (wheat, corn, barley, rice, soybeans, etc.). ✅ CONTAINER TYPE: 20-foot bulk container ✅ DELIVERY CONDITION: used, wind and watertight, cargo worthy, original images ✅ COLOR: Gray ✅ DIMENSIONS L x W x H: According to ISO standard External dimensions: 6,058 x 2,438 x 2,591 mm, internal dimensions: 5,898 x 2,352 x 2,390 mm, door dimensions: 2,338 x 2,280 mm, volume: approx. 33 m³, weight: depending on the design, 2,200 – 2,400 kg ✅ ADVANTAGES: Bulk containers save on packaging, can be loaded and unloaded quickly, and are still stackable and can be used in multimodal transport (ship, rail, truck) in regular container traffic. ✅ TRANSPORT: Please provide us with your postal code so that we can prepare a free and non-binding offer for containers including delivery and, if necessary, unloading from the truck. ✅ VARIETY: You can also find a wide range of sea containers in all common sizes (20DV, 40DV, 20HC, 40HC, etc.) and for every need. Whether for storage, construction projects, logistics solutions, or sea transport. Djde Ahm Rpjpfx Alfswd We look forward to hearing from you! NAUTEXA GmbH

Condition: used, Hydraulic valve, servo valve, proportional valve Hydraulic servo valve, continuously variable valve, PARKER DFplus type D1FPE02MC9NB00 20 Manufacturer: Parker Hannifin GmbH Operating voltage: 24 VDC Dodpfx As Agw D Rjlfswd Operating pressure: max. 350 bar Length = 220 mm Width = 48 mm Height = 145 mm Weight: 4 kg Good condition 3 pieces available, price per piece.

Year of construction: 2026, condition: used, Suitable for measuring tooth tips and tooth back on circular saw blades of all kinds within 1 minute. Equipment: Dwodpfs Ahhtlox Alfod Saw blade cone mount, bore from 15 to 50 mm Digital display Circular saw blade diameter: 80 - 650 mm Zoom factor: 10x Distortion:

Condition: good (used), functionality: fully functional, power: 13 kW (17.68 HP), fuel type: diesel, empty load weight: 2,020 kg, Year of construction: 2016, operating hours: 4,472 h, Equipment: cabin, gripper hydraulics, hammer hydraulics, Mini excavator TEREX TC 20 (identical to Schaeff model) Year of manufacture: 2016 According to the hour meter: 4,472 hours 2,020 kg 13.1 kW - Quick coupler MS 01 - All hoses - Hydraulic tilting bucket - Deep excavation bucket - Cabin with heating - Work lights - Immobilizer - Central lubrication system - Hydraulic adjustable undercarriage - Ready for immediate use - Good tracks - Well-maintained machine - Includes CE certificate and all other documents Selling price: €15,500 net Dwjdj Agwyfspfx Alfed Affordable delivery options also available!

Condition: new, Year of construction: 2026, - Pressing force: 20 tons - Bending capacity: 200 x 10 mm - Automatic function - Adjustable stroke Dsdps Aidq Usfx Alfswd - Foot pedal operation - Emergency stop switch - Material stop - Documentation - 400V

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 740 h, machine/vehicle number: Z30N14-15413, load capacity: 227 kg, mast type: other, lifting height: 10,890 mm, platform width: 1,170 mm, empty load weight: 6,450 kg, transport width: 1,190 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 06/2027, fuel type: electric, tire condition: 80 %, drive condition: 80 %, wheelbase: 1,580 mm, ground clearance: 90 mm, color: blue, arm reach: 6,250 mm, For sale is a Genie Z30/20N RJ, ideal for industrial applications, assembly work, indoor tasks, maintenance, electrical installations, and facility management. Sale / Invoice / VAT Commercial sale with a proper invoice including VAT. Condition: Used, well-maintained Description: The platform lift is in good technical and visual condition. It has been regularly maintained and comes from a well-maintained fleet. No damage, no error messages – everything functions perfectly. Technical data: Year of manufacture: 12/2013 Commissioning: 04/2014 Operating hours: 859h Working height: 10.89 m Platform height: 8.89 m Horizontal reach: 6.25 m Width: 1.19 m Overall height: 2.00 m Load capacity: 227 kg Weight: 6,450 kg Platform dimensions: 1.17 × 0.76 m Platform rotation: 180° Turret rotation: 355° Drive: Electric – ideal for indoor use Tires: Non-marking solid rubber tires Dwodpfxezhtnhe Alfjd ----- Sale exclusively to businesses. Sale is subject to exclusion of liability for material defects, to the extent permitted by law. Subject to prior sale, errors and changes.

Condition: used, maximum load weight: 13,570 kg, overall weight: 21,500 kg, axle configuration: 1 axle, first registration: 04/2019, loading space length: 11,800 mm, loading space width: 2,500 mm, loading space height: 2,480 mm, loading space volume: 73 m³, Equipment: ABS, Lanz + Marti SA 20 refrigerated box body, LBW, steered axle, new TÜV inspection For inquiries: 1026875 Dedpfx Alo Ah I U Hsfowd * First registration: 04/2019 * Condition: very good * Permissible total weight: 21,500 kg * Weight: 7,930 kg * ABS * EBS * 1-axle air suspension / steered * Drum brakes * Underrun protection, aluminum Refrigeration unit: Carrier - Vector 1950 Mt° * Diesel hours: 3,690 h * Electric hours: 18 h Tail lift: Zepro Load capacity up to max. 2,000 kg, dimensions: Cargo space length: 11,320 mm Cargo space width: 2,470 mm Cargo space height: 2,790 mm Tires: 1st axle: 245/70 R 19.5, 40% tread, air suspension ----Price: 21,900 EUR + 19% VAT For further questions, you can reach us at the following telephone numbers: * We speak: German, English, French, Polish, and...? Typographical errors, errors and prior sale are subject to change.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 20 mm -Dimensions: see photo technical drawing -Overall dimensions: 70/80/H55 mm -Total weight: 1.4 kg Dwsdpfx Aj Air A Sslfed

Condition: used, Year of construction: 1959, functionality: fully functional, overall weight: 43,000 kg, LASCO KH200 forging hammer from company stock. The conversion to Siemens S7 is documented for 2010/2011. Control panel, foot pedal, installed dies, and tension wedges are included. Technical specifications: • Year of manufacture 1959, according to available documents • Impact energy 20 kJ, ram weight 1,800 kg • Impact rate up to 100/min • Total weight approximately 43 t Impact data and total weight are documented in the KTI documents. Drawings, hammer path documentation, and electrical diagrams are available. Condition and inspection The machine is functional and can be demonstrated under power by arrangement. To the seller's knowledge, no defects are known. Availability and collection Available immediately. Disassembly, loading, and transport are the responsibility of the buyer. The exact scope of delivery and the collection date will be agreed upon. Dsdo Aia Ubjpfx Alfowd

Condition: used, machine/vehicle number: 14153, Rotor blades = 3 Stator blades = 3 Drive power: 4 kW Dodpfx Als Aa D Dzsfowd

Condition: good (used), Year of construction: 1983, Pitch 32 mm Motor output 1,8 kW Dwsdpjzfqk Isfx Alfod Weight 240 kg Number of boring spindles 21 St.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: M06I/8947, Offer Number: M06I/8947 Machinetype: double blow header Make: FENG PEI Dedpfxjwi Tcwj Alfowd Type: FWB 20-165 Constr. year: 2000 diameter range: 2-6 mm shaft length under head: 145 mm cutting length: 165 mm output - pieces/min: 100 Location: Germany

Condition: used, mileage: 58,695 km, power: 235 kW (319.51 HP), first registration: 01/1978, fuel type: diesel, overall weight: 22,000 kg, axle configuration: 3 axles, color: green, gearing type: mechanical, Year of construction: 1978, Equipment: all wheel drive, crane, 1429. GW186970259 Year of manufacture: 1978, vehicle has never been registered, recorded mileage: approx. 58,695 km (no guarantee) Power: 320 hp Engine displacement: 12,763 ccm Drive type: Diesel Unladen/Gross vehicle weight: 13,190/22,000 kg Number of seats: 3 in the front Equipment: Crane Palfinger PK7500N V751, year of manufacture 1976: Crane capacities: * 730 kg at 7.10 m * 1180 kg at 6 m * 1450 kg at 5 m * 1850 kg at 4 m * 2450 kg at 3 m * 3750 kg at 2 m Canvas cover installed at the rear ----We will gladly accept your vehicle as a trade-in. Financing/leasing is also possible without a down payment. Errors and prior sale excepted. Dsdpo Afrthofx Alfowd Do you have any further questions? We will be happy to advise you!

Condition: good (used), Horizon VAC-100a + VAC-100c + SPF-20 + FC-20 Booklet Maker The machine is in very good condition, well-maintained, and ready to work. Made in Japan. The line consists of: – Horizon VAC-100a / VAC-100c Max size: 350x500mm Min size: 120x148mm Vacuum feeding 10 shelves Stack height: 55mm Basic weight: 40-270g 230V power supply Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Horizon SPF-20 Max size: 500x350mm Min size: 120x180mm Wire stitching Folding Two Hohner heads (max. 4) 230V power supply Weight: 490kg Horizon FC-20 Cutting capacity: 88 sheets 230V power supply Dwsdpfjz R Irlox Alfjd Weight: 240 kg The machine includes: an LC-20 delivery system, additional EAB-100 compressors, a PK-20 packaging kit, a PJ-75 jogging system, operating tools, spare parts, and full documentation with parts catalogs.

Condition: used, maximum load weight: 37,725 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 09/2016, next inspection (TÜV): 10/2027, total length: 9,460 mm, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2016, Additional information: Djdpfxo Ahmide Alfswd * Type | First axle: Bridgestone R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Bridgestone R * Type | Third axle: Bridgestone R * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner left | Third axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional features: * Homepage * Lift axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. The stated prices exclude BPM and are valid only for export.

Condition: new, Year of construction: 2023, Horizontal bending machine AH 20 with backgauge - ZOPF - with semi-automatic control - hydraulic pressure 20 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 2,2 KW - 400 V 50 hz 3 ph. - working height 900 mm Djdpfx Alswyt Tqjfjwd - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x12 mm round tube up to 48 mm

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used press brake by Darley Type EHP 50 20 15 Capacity 2050 x 50 tons Equipped with new Esa S630 control and Merlino lasersafe Includes set of tools Djdpfx Ajxq Dfvjlfjwd

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 17,859 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 32,700 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,050 mm, Diesel Forklift Load Centre: 1200 Fork Width: 200 mm Fork Thickness: 110 mm Mast Type: Standard Transmission: NEW Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Dwodpfx Alez Ev Nysfed Front Tyres Size: 14.00-24 Rear Tyres Type: Pneumatic Rear Tyres Size: 14.00-24 Description: In addition to this Konecranes model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Leasing & financing at attractive rates are always available. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide detailed advice on this SMV20-1200B. P.S.: Our forklift master workshop specialises in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Sideshift, fork positioner, Heater, full cab, air conditioning, NEW ENGINE AND TRANSMISSION

Condition: used, power: 11 kW (14.96 HP), gearing type: mechanical, fuel type: diesel, color: green, empty load weight: 707 kg, first registration: 01/2007, suspension: other, , wagon no. 38, AMMANN AVH 100/20 vibrating plate, year of manufacture 2007, Hatz diesel engine with 11.3 kW, hydrostatic drive, operating weight: 707 kg, electric start. For inquiries, please contact or . Subject to errors and prior sale. Djdpfo Agggvex Alfswd

Condition: used, Year of construction: 1995, pressure 55 t chamfer lenght 2000 mm distance between columns 1640 mm height of stroke 325 mm work feed 15 mm/s control SOMABEND total power requirement 12,5 kW weight of the machine ca. 4,3 t Dwodpfxjx Tu Sze Alfed LVD PPI 55/20 MNC 95 – CNC Press Brake – Year 1995 For sale is a used hydraulic CNC press brake manufactured by LVD, model PPI 55/20 MNC 95. Technical Specifications: Manufacturer: LVD, Belgium Model: PPI 55/20 MNC 95 Year of Manufacture: Pressing Capacity: 55 tonnes Bending Length: Approx. 2,000 mm CNC Control: MNC 95 Power Supply: 380 V / 50 Hz Connected Load: 12.5 kW Rated Current: 25 A Machine Weight: Approx. 4,300 kg Serial Number: 22162 Condition: The machine is used and shows signs of wear consistent with its age. It is offered as being in working condition. However, its full technical functionality and all machine functions have not been comprehensively tested and therefore cannot be guaranteed. The machine is offered in its existing as-is condition, as inspected and/or shown in the photographs. Age-related wear, technical defects and potential maintenance or repair requirements cannot be ruled out. Important Notice: All technical specifications, equipment details and information regarding the machine's condition are based on the available nameplates, photographs and other information currently available. All information is provided in good faith but is strictly subject to verification and without any guarantee as to its accuracy, completeness or continued functionality. The technical specifications and statements regarding operational condition do not constitute a guarantee of condition, performance or fitness for purpose. Errors, omissions, technical discrepancies and prior sale excepted. Prospective buyers are strongly advised to inspect and test the machine and independently verify all relevant technical specifications and its operational condition before purchasing. Inspection by prior appointment is possible.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 11/2012, loading space length: 13,610 mm, loading space width: 2,490 mm, loading space height: 2,740 mm, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 275/70, tire condition: 60 %, wheelbase: 8,860 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Steering Axle = More information = General information Year of construction: 2012 Registration number: OL-87-VB Dsdpfxs Ahpc Do Alfewd Axle configuration Make axles: BPW Tyre profile: 60% Suspension: air suspension Rear axle 1: Tyre size: 275/70; Max. axle load: 10000 kg Rear axle 2: Tyre size: 385/55; Max. axle load: 10000 kg; Steering Weights Empty weight: 8.700 kg Carrying capacity: 25.300 kg GVW: 34.000 kg