Used Nesting for sale (258)

Condition: new, Year of construction: 2025, Machine includes: Pre-milling, pre-heating, pre-melting, pressing, fine trimming, end cutting, corner rounding, cutter scraping, flat scraping, buffing Heavy duty machine body and most mechanical machine parts are proceeded by advanced CNC machines for higher stability and longer service life without deforming; Merges numerous functions in one machine, including pre-milling, pre-heating, pre-melt gluing system, snipping, end trimming, fine trimming with servo, corner trimming, scraping with servo, surface scraping and buffing, sprayers, edge banding work can be done in one process. Fgjdpfxexd Ubbj Ab Tok Intelligent PC control, infeed fence, tape pressing rollers, fine trimming and scraping are servo adjust. Corner rounding pneumatic adjust. Machine Speed 16/20/24m/min; Nesting kit design, pre-drilled nesting hole friendly Fine trimming and Corner rounding by HSK25

Condition: good (used), Year of construction: 2013, 1 laser system with 1 loading station, 2 nests each - Up to 4 welding fixtures - Laser power: 3.3 kW - Beam source: Trumpf Trudisk 3302 disk laser - System manufacturer: Sitec - Operating hours: approx. 70,000 h - Max. workpiece dimensions: approx. 300 x 100 x 100 mm - Larger workpieces possible - Beam guidance via laser light cable (LLK) - Laser welding with Trumpf BEO D 70 welding optics on one axis system. Fgjdpfx Ajwm I H Ssb Tsk - Inline laser monitoring system for weld seam monitoring - Welding speeds: up to 5600 mm/min - Welding penetration depth: 1.5 mm - Welding with shielding gas possible! For aluminum or stainless steel - Fixtures can be water-cooled! - 2 rotary axes per table side, individually programmable PROGRAMMING: 4 cylinder clamping circuits per tool 10 inputs via slip ring rotary distributor 8 additional inputs per tool via radio system Inputs freely configurable via user interface (end position / part control / setup control) Clamping and release programs and part queries fully programmable via NC program No PLC programming required System fully programmable via Siemens control (G-code) Laser programmed via Trumpf TruControl and called via Siemens control (G-code). Output Guidelines T 1: 2 weld seams (each 100 mm in diameter, weld penetration depth = 1.5 mm) 2 components per side of the table approx. 250 parts per hour T 2: 17 weld seams (each 10 mm in diameter, weld penetration depth = 1.2 mm) 2 components per side of the table approx. 190 parts per hour The system can be viewed live!

Condition: new, Year of construction: 2025, Product characteristics The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Technical data Power supply 230 V LCD 7" color Code format G-Code Working dimensions Fjdpfxevxhwvo Ab Tegk 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, HOLZ-HER Dowel Drilling & Inserting Machine POWER-PIN 7605 • Minimum workpiece length 60 mm, maximum unlimited – limited only when workpieces are positioned against the stop elements. • CAPMUS V7x POWER-PIN software Fsdpfx Asxdlwgjb Tsgk • LED strip for easy orientation • Dowel insertion unit DA102 for pre-glued dowels, as well as use with raw dowels in combination with white glue. The POWER-PIN dowel machine – suitable as a standard dowel inserting machine or the perfect addition to, for example, nesting or console machines. From carcase furniture to high-quality solid wood drawers with a minimum material thickness of 12 mm, the 7605 is the ideal machine for drilling and inserting wooden dowels. The continuous LED strip displays the machine status and indicates to the operator the correct insertion position for the workpiece. A barcode scanner can be used to scan, for example, DataMatrix codes containing the processing instructions for the workpiece. Drilling positions and depths are automatically adjusted and approached by the machine. Also visit our Classic Shop on our homepage.

Condition: excellent (used), Year of construction: 2008, Microstep plasma cutting machine cutting format 2000x6000MM power source Hypertherm 260 AMP year 2008 with nesting program Fodpfx Abst Uz Upo Tsgk on computer at the machine, incl. extraction and filter, many new wear parts

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm 22 mm solid wood Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Fgjdsr Ip Sdspfx Ab Tek Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Base Machine - Dynestic 7521 20.6 Dynestic Table For classic nesting processing with wear plate Processing length 6250 mm (DYNESTIC 20.6 comes with additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles Gantry-type design Rack and pinion drive, helical-toothed, in X and Y directions, Ball screw spindle in Z direction for precise positioning Technical Data: The technical data refers to the DYNESTIC 7521 - 20.6 Please refer to the respective datasheets. Processing Dimensions: Max. workpiece size for trimming: X = 6250 mm Y = 2100 mm Max. travel distances: X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height on DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm from table surface (without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and observation window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system Windows XP 80 GB hard disk / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD writer) Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection required. Requirement: High-speed internet connection at the machine. DYNESTIC Table Fixed, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for fixing the wear plate 1 processing field with stop rails / stop Height 30 mm, pneumatically retractable 2 stop rails each in Y-direction and 1 stop in X-direction right side (from machine front edge perspective) Vacuum Fields Single-circuit vacuum system Drilling Unit 7976, 24 spindles Motor power 3.0 kW 18 vertical spindles, individually selectable L-shaped arrangement: 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on board thickness) Spindle extension stroke: 70 mm Rotation: Alternating right/left n(max.) 1000 - 5710 rpm steplessly adjustable Fgsdpfxsw I U Eco Ab Tek Mounting: M10 thread - 11 mm fitting Without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction (Distance 32 mm between 1st and 2nd horizontal spindle) 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Max. total drill length 70 mm from mounting end Without tool, without holder Free slot 1 for: Optional double drilling spindle in X-direction or Vertical adapter with double pressing force Free slot 2 for: Optional saw in X-direction or Vertical adapter with double pressing force Milling Unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, two-stage feed stroke max. power at 12000 rpm to 24000 rpm Air-cooled with HSK-F 63 tool holder with right-hand rot...

Condition: new, functionality: fully functional, feed rate X-axis: 9 m/min, total length: 2,600 mm, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, warranty duration: 12 months, Automatic edge banding machine with bottom glue pot for hot melt adhesive (EVA), and, depending on the model, also suitable for polyurethane (PUR) on request. Features include a jointing/milling unit, corner rounding device, spraying system, and buffing unit. Feed speed: 9 m/min Panel thickness: 50 mm Edge thickness from roll: 3 mm Edge thickness solid wood strips: 5 mm Chain feed Prefeeding/jointing and gluing unit Corner rounding device Unit adjustment by sample edges or Unit adjustment by scale Simple and intuitive controls Fgodpfx Ajxanllsb Tok Machine equipment: Display: 7'' color touchscreen Option for programmable memory operation Graphical interface directly indicates processing result on the panel Single-click access to desired processing function Interchangeable glue pot 6 heating elements ensure guaranteed, uniform glue temperature Motorized glue application roller with internal electric heating element Teflon-coated glue pot for fast and thorough cleaning EVA & PUR in the same glue pot possible! (depending on model) Quick-change system for fast and easy glue pot replacement Teflon-coated glue pot for complete and easy cleaning Glue pot capacity: 1 kg Depending on adhesive type, two different temperatures with automatic standby function can be set Tool kit R = 2 mm Quick change between processing types: thin edges, radius, solid wood strip 2 HF motors 200 Hz, 12,000 rpm Flush trimming unit with multi-profile tool for thin edge and solid wood radius Nesting package optional Scraper unit Flat surface scraper Buffing unit Cleaning spray unit Electronically controlled spraying function 2 spray nozzles (top and bottom) and fluid tank LED interior lighting The LED interior lighting ensures safe machine adjustments even in low ambient light The complete price list will soon be available in German. List prices subject to our discount, which will be passed on to you. See the attached PDF document for all details. All machines available. Please note respective delivery times. Installation, training, and repair services provided by Bima throughout Germany. Contact us for more information :)

Condition: new, Year of construction: 2024, The INDUSTRY 2.0 ATC series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 ATC series CNC milling machine with a working surface of 2100x4000mm and a clearance in the Z axis of 300mm is equipped with a 9kW electrospindle and 24000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots allowing manual clamping of irregular shapes. Fgjdpfx Ajtvmcmjb Tek ATC - The machine is equipped with an automatic linear magazine with a capacity of 8 tools. The automatic cutter changer does not require manual tool changing by the operator. Within one process, the machine can perform a multitude of operations such as surface planning, milling and drilling with various tools. Reinforced HEAVY DUTY construction - the machine body consists of profiles with a wall thickness of up to 10 mm. The frame is welded in its entirety, then subjected to a stress-relieving process in special conditions, and finally milled. This sequence of the process ensures the achievement of excellent results in stiffness, stability and vibration resistance. INDUSTRY 2.0 is a must-have in production plants requiring maximum machine efficiency. Worktable size - X - 2100mm, Y - 4000mm, Z - 300mm Drive - Leadshine servo drives with 1500W power and high holding torque (Double on the Y axis) Drive transmission - The most precise NIDEC SHIMPO planetary reducers Runner system - PMI 25mm linear guides and carriages with helical inclined strips with maximum contact surface Electric spindle - 9kW, 24000 rpm on full ceramic bearings Guide lubrication system - Automatic Tool length measurement system - Automatic Control system - NK-105 G3 controller Cables - Fireproof, adapted to bending and protected against deformation Manufacturer: TechnologieCNC Model: 2140 INDUSTRY 2.0 ATC Max. working speed in free passes: up to 33m/min Max. working speed in material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (ramp entry function, automatic NESTING) - additional cost PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz A German vacuum pump BECKER VTLF 2.250 of the renowned BECKER brand with a capacity of up to 244m3/h is included in the standard equipment of the machine.

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w X/Y-axis positioning accuracy: 0.05mm X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, installing in place, greatly reducing installation time. 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. 3. Rectangular Tube Welded Bed Fedeg I H Ntopfx Ab Tjgk Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 22.198, input frequency: 50 Hz, Showroom model Fully CNC-controlled edge bander, very comprehensively equipped: Pre-milling unit Gluing unit Front and rear cut-off saw unit Fine milling unit (top and bottom) Corner rounding unit (front and rear) Radius scraper unit Additional options available: Infeed roller for 2 types of edge bands, including solid up to 5 mm. R-8 N glue scraper unit. PC 19” touch screen (new). CNC-controlled infeed guide. Pre-milling unit with 65 mm high diamond tools. Pneumatic on/off. Infrared lamp at infeed. Universal feed rule. Antistatic at infeed (type Riepe) Fedpfx Asw Ufuhjb Tsgk Anti-adhesive unit after the milling unit (type Riepe) Cleaning unit at outfeed (type Riepe) LED in the cabin. WiFi Kit unit. LED motion system. Duo Melt EVA/PUR glue unit. Nesting for panels with hinge holes. Automatic chain lubrication.

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Fsdpfx Aewt Snyeb Tjgk

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and technical specifications: Gluing max. 8-55 mm Fgsdpfx Abew Nadgs Tsk Including rotating control panel Dual-motor HF joining unit Including replaceable, Teflon-coated rapid heating tank Including electronically controlled positioning of the pressure rollers Including pivoting double cross-cut saw unit Including flush trimming unit Including application-controlled bevel, radius, and corner rounding unit with nesting package Including radius scraper with nesting package Including flat scraper Including grooving unit Including buffing unit Including spray unit Location: Hesse Availability: Upon request !Sold on behalf of customers!

Condition: used, Fiber laser, fiber laser cutting machine with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer DURMA Type HD-F III 3015 III BH-IPG 2kW Serial no. 822817712 Year of construction 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area 3000 x 1500 mm Pipe cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50,100,200,300 µm - Max. power consumption 42 kW - Machine power consumption 20 kW - Filter power consumption 4 kW - Cooler power consumption 10+1 kW - Resonator power consumption 7 kW Mild steel Sheet thickness max. 12 mm - Stainless steel Sheet thickness max. 6 mm - Aluminum Sheet thickness max. 6 mm - Copper Sheet thickness max. 3 mm - Brass Sheet thickness max. 6 mm Working range X-axis 3060 mm Working range Y-axis 1530 mm Working range Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator opposite - Water recooling unit for laser source and cutting head opposite - Under-table extraction and extraction filter system opposite - with 2-fold shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flatbed Fedpfxskdnv Te Ab Tegk - Lynettes for Rorlaser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: new, Year of construction: 2024, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels Fgedpfog Tu Rkjx Ab Tjk release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: ready for operation (used), Year of construction: 2004, Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Fgjdpow Sxyfjfx Ab Tsk

Condition: new, functionality: fully functional, controller model: HSG-X9000, pipe diameter (max.): 273 mm, positioning accuracy: 0.03 mm, workpiece weight (max.): 200 kg, workpiece length (max.): 7,100 mm, Machine is still completely new & in its original packaging! TECHNICAL DETAILS Workpiece Round tube: φ12 - φ273 mm Square tube: 12 × 12 - 200 × 200 mm Rectangular tube (diagonal): ≤273 mm U-profile (per side): ≤180 mm L-profile (per side): ≤180 mm H-profile (per side): ≤180 mm Max. single tube weight: 200 kg Max. manual loading length: 7,100 mm Max. acceleration: 1.2 G Max. rapid traverse: 120 mm/min Positioning accuracy: ±0.03 mm/m MACHINE DETAILS Laser source: 3 kW Raycus Laser head: HSG Blade CNC control: HSG-X9000 Dimensions: 12,500 × 4,700 × 2,600 mm Fedsw Rqmuspfx Ab Tsgk EQUIPMENT - Loader AL03 - Software: Intelligent Control System, Nesting Software, Tube Splicing Technology, Cutting Line Common Side Function, Intelligent Leapfrog Function

Condition: used, Year of construction: 2012, Nesting machining center with automatic unloading PC-based numerical control - ALPHCAM user interface software + Alphacam Nesting software X-axis work range: 4200 mm Y-axis work range: 2100 mm Nesting work table One 3-axis vertical electrospindle, 9 kW, with automatic tool changer, HSK F63 type cones Automatic tool changer with 6 positions DH 17 drilling head with 17 vertical spindles Automatic unloading system with motorized conveyor Adhesive label printing and application system with labeler Protection and safety system with perimeter grilles Safety system with front safety mats Automatic lubrication system Air conditioning system for cooling and cleaning the machine control Three 250 m3/h vacuum pumps TECHNICAL DETAILS TO BE VERIFIED Fgedpfx Abjwc Uwie Tok

Condition: ready for operation (used), Year of construction: 2017, Swift Jet Water Jet Cutting Machine Ex University Machine Cutting Area 1525 x 3050mm Z axis Clearance 220mm Tank Depth 840mm Water Pump Hypertherm HyPrecision 30Hp Positional Accuracy + - 0.015mm Fedsw Rg Sajpfx Ab Tsgk Traverse Speeds 15m/min Advanced nesting and cutting software Collision Protection, heavy duty build that will cut almost any material with no heat distortion. *For sale with Jet Machinery Ltd* Stock No: 78971 Serial No: 1160111 Price: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 4,450 h, KIMLA POWERCUT LF 1530 6 kW Fiber Laser manufactured in 2022 in Poland by POLCOM Przemysław Kimla. Laser cutting is performed using a stable 6 kW fiber optic beam. The head includes a lens assembly ensuring optimal beam geometry for various component types. The entire machining process is supported by an automatic pallet exchange system, which allows for simultaneous loading and unloading of parts during cutting. All linear axes (X, Y, Z) are powered by high-performance servo drives. Their innovative technology, based on real-time Ethernet data transmission, allows configuration of four motion parameters (position, speed, acceleration, and jerk). The POWERCUT LF 1530 fiber laser is built on a rigid, monolithic frame. The gantry design draws inspiration from aerospace structures, prioritizing low mass and high rigidity. Extensive equipment includes, among others, an interactive control system integrating CAD/CAM software and CNC control. Among the many advantages of this solution, the machine operator always has the ability to edit, correct, modify geometry, arrange, generate toolpath, and resume work. This system also features automatic nesting with production management modules. The offered KIMLA POWERCUT tube and profile laser cutter was installed and commissioned in February 2023. Since then, the machine has operated for only 4,450 hours. Technical Specifications of KIMLA POWERCUT LF 1530 Laser Cutter: - Laser power: 6 kW - X/Y/Z axis travel: 1500/3000/120 mm - X/Y/Z axis feed rate: 180/180/70 m/min Fgjdpfx Abow N Il Ss Tek - Maximum sheet dimensions: 3050 x 1550 mm - Maximum sheet weight: 900 kg - Max. rectangular profile cross-section: 100x100 mm - Min. rectangular profile cross-section: 20x20 mm - Maximum pipe diameter: 150 mm - Minimum pipe diameter: 20 mm - Table height: 850 mm - Table exchange speed: 1 m/s - Operating hours: 4450 h - Air pressure: 7 bar - Nitrogen pressure: 30 bar - Oxygen pressure: 10 bar - Power supply: 3x 400 V; 50 Hz - Machine dimensions without additional devices (L x W x H): 4400 x 2800 x 2400 mm - Machine weight: 10,000 kg KIMLA Laser Cutting Machine Equipment: - CNC controller - CAD/CAM software - Integrated system for cutting tubes and rectangular profiles - Ability to cut with compressed air - IPG laser source with safety module and power control system - Pallet exchange system - Automatic sheet position detection system and adaptive toolpath adjustment - Dedicated parametric laser beam modulator for customizable modulation characteristics - Automatic nozzle height control calibration - Multi-chamber DONALDSON Torit DCE extraction system with pulse cleaning - 20 kHz linear motors in all axes - RENISHAW measuring scales - Dual-sided gantry drive - Multifunctional control panel - Integrated cooling system with digital temperature stabilization - Worktable with precision mechanical locking - Gas supply system (oxygen and nitrogen) with pressure regulation and safeguards against pressure loss - RJ45 port - USB port - Waste bins

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, GS-20050H0G Section Steel Laser Cutting Machine Beam cross-section size: 450×400mm Beam center span: 2400mm Bevel cutting highly enhances competitiveness Smart cutting head equipped with professional Acu3D rotary axis Achieves multi-directional, multi-angle 3D cutting (Web beveling, R-corner cutting, V bevel, Y bevel) Versatile cutting Fgjdpfxew I Ilis Ab Tok Sheet, tube, and section steel cutting in one One-stop processing workflow, seamlessly integrated with TEKLA Easily complete drawing import - nesting & programming - process setup - material alignment - cutting Tube cutting Supports high-precision cutting of round tubes with diameters from 600–1200 mm Section steel cutting Supports cutting of H-beams up to 1200 mm

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Fgedpfx Abewmqwyj Tsk

Condition: used, Year of construction: 2010, 5-axis machining center with nesting table Numerical Control with OSAI software Axis travel (X, Y, Z) mm 4950, 2050, 1000 Working range on X-axis mm 4250 Working range on Y axis mm 1560 Working range on Z axis mm 800 FT multifunctional nesting full-surface worktable No. 1 PRISMA 5-axis electrospindle, kW 12 (hp 16), 900 - 24000 rpm, rotation directions SX / DX Automatic tool changer with 12 positions, HSK-F 63 type cones * n 12 tools diameter 80 mm * n 6 tools diameter 160 mm * max tool diameter mm 250 * maximum weight per tool 4 kg * maximum weight in the warehouse 24 kg Drilling head with 9 spindles arranged as follows: - No. 5 vertical spindles; - No. 4 horizontal star spindles; * Distance between spindles mm 32 * rotation speed rpm 4000 * engine power kw 2.2 Protection and safety system with photocells and perimeter walls Automatic lubrication system Air conditioning system for the electrical panel No. 2 vacuum pumps, one of 250 m3/h Accessories and tools are sold separately Overall dimensions mm 7865 x 4200 x 4000 TECHNICAL DETAILS TO BE CHECKED Fgedpowdvr Rofx Ab Tek

Year of construction: 2023, condition: ready for operation (used), A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025. Fgedpown H Udofx Ab Tok

Condition: used, Numerical Control NC 1000 Software Biesse Works Working field in X axis 3685 mm Working field in Y axis 1290 mm Working stroke in Z axis 200 mm - piece passage 70 mm FT nesting full plane worktable Automatic loading system with side lifting table N ° 1 vertical electrospindle, with automatic tool change, Automatic tool change system with 18 positions - positioned on the rear of the machine Boring head with independent spindles arranged as follows: - N ° 7 vertical in X axis - N ° 7 vertical in Y axis - N ° 2 horizontal in X axis - N ° 2 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE Fjdpfx Ajwufv Teb Tjgk