Used Nesting for sale (248)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used BIESSE Rover A - Nesting CNC - Year of manufacture: 2016 - Available from November 2025 Lsdpfexhcndox Ab Usah - Additional photos and video available

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm Laodpfoxg Ix Sex Ab Ujh - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: excellent (used), Year of construction: 2019, operating hours: 9,930 h, functionality: fully functional, machine/vehicle number: AA10001591, travel distance X-axis: 3,770 mm, travel distance Y-axis: 2,585 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 3,086 mm, feed length Y-axis: 2,185 mm, feed length Z-axis: 150 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 6 m/min, nominal power (apparent): 29 kVA, controller manufacturer: SCM, workpiece length (max.): 3,086 mm, workpiece width (max.): 2,185 mm, workpiece height (max.): 150 mm, total height: 2,190 mm, total length: 5,215 mm, total width: 3,472 mm, table width: 2,185 mm, table length: 3,086 mm, overall weight: 2,800 kg, spindle speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 2,000 h, spindle motor power: 10 W, number of spindles: 1, number of slots in tool magazine: 19, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, Brand and Model: SCM MORBIDELLI N100 22-31 C Serial Number: AA10001591 Year of Production: 2019 Condition: Excellent Location: Northern Ireland Almost as new condition and well maintained In full working order and still in use Includes many extras for a cost free set-up Financial information VAT: The price shown is exclusive of VAT which is not applicable for purchasers outside the UK Duty: Shipments from Northern Ireland to the EU are excempt from customs and duty Price: As seen and excludes any moving of the machine or preparation for shipping Machine Specification: High Performance aluminium worktable 8 rectractable stops NC managed Two vacuum fields half and full table Vacuum cup set Automatic centralised lubrication system 2 off Becker 250/300 m3/hr vacuum pumps 9.5KW spindle 1500-24000 rpm with left and right rotation HSK F 63 quick release toolholder With exhaust hood for spindle 4 off air blowers on the spindle 1 off lateral pickup for aggregate tool High capacity toolholder with 19 places F12L drilling head comprising 4xleft and 4xright spindles 1off X and 1off Y double drilling heads 1off integrated blade in x axis Drill head complete with exhaust hood Bit speed 4500rpm 60mm stroke Blade 5500rpm Tool length detection system "Tecpad" wired remote control with 7 inch touch screen colour Eye-M PC integrated touchscreen control station Laodpfx Abow Nyd Ts Ueh Maestro CNC with 2 off dongles Extras include in price: Ducting for the machine to an extraction unit Switchgear and cables Tooling approx 20 HSK 63F ER32 holders plus collets 4 off EMST extract max tool holders PCD cutters Skimming tool Maestro nesting Alphacam 1 seat Full original documentation is available Also available: Extraction system to suit €4000 Compressor to suit €4500 Panel lifting unit to suit €12000

Condition: excellent (used), Year of construction: 2018, Used 5-axis CNC machining center including edge banding Manufacturer: HOMAG Model: PROFI BMG310/42/F/V/K Year of manufacture: 2018 Main spindle overhauled by Benz GmbH Working area X: 4200 mm (4375 mm with tool diameter 25 mm) Working area Y: 1350 mm for all units - Milling with tool diameter 25 mm: 1600 mm - PowerEdge: 1600 mm Workpiece thickness: 300 mm Equipment: - Speed Pack - 32-position disc tool changer (24+8) Lajdpfew H Nzdsx Ab Uoh - 10-position disc tool changer - 8-position linear tool changer - Processing spindle 12 kW Drive5C - Spindle vibration visualization - Drilling head with 31 spindles: Vertical 21 / Horizontal 10 / 0° / 90° - Additional milling spindle 6 kW for drilling head - Blowing nozzle for workpiece edge, 60 mm - PowerEdge edge banding unit - Pre-trimming station and double roller BMG310/V - Additional roll plate for pre-trimming station KH 65 mm - Pneumatic lift for drive spindle - Saw/trimming unit for tool changer - Combination flush trimming and scraper unit - LED positioning display system - PowerClamp fixture interface for console table - Dynamic nesting management - Vacuum system 290/345 m³/h - PowerControl PC87 Powertouch - Collision control - Tool length measuring system - WoodWop component Lamello Clamex-P - Chip conveyor - SafeScan for Speed Pack BMG And much more. Complete technical data available in the attached PDF document.

Condition: like new (used), Year of construction: 2020, I am offering furniture dollies/storage trolleys with the following dimensions: Width x Depth x Height: 2000 x 1150 x 1800/2000/2200/2400 mm ✅ Current stock: approx. 2,000 units ✅ Other sizes of furniture trolleys available on request. ✅ Each furniture dolly is fully refurbished (replacement of panels, pins). ✅ We provide a 1-year warranty on used furniture trolleys. • Stackable up to 3 units high Lasdpfxoxgifyo Ab Ush • Wheels made of 100% polyamide, 4 swivel casters, 1 wheel with directional lock • Empty trolleys can be folded and nested into each other The furniture dolly is ideal for in-house transport and storage of almost all types of goods. Thanks to the triple stacking capability, the full storage height can be optimally utilized. All trolleys are in very good condition. Invoice provided as a matter of course. Transport available across Europe. KAM-KUB Logistic&Trolleys Europe – Your specialist for sales and service of furniture dollies in Europe.

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Condition: as new Includes 6 months full warranty! Only 70 operating hours; the machine has not yet been used in production! Equipment and technical data: BASE MACHINE Holz-Her Processing Center DYNESTIC 7535 10.5 Lift Processing length: 3100 mm Machine frame: welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles. Gantry design. Rack-and-pinion drive, helical gears in X and Y direction, 1 precision ball screw in Z direction for accurate positioning. MATRIX TABLE Fixed, continuous processing table with grid markings and through-slots in X and Y direction, slot spacing 50 mm. Includes 25 meters of sealing cord for fixing the sacrificial plate. 1 work zone with stop rails/stops - stop height 30 mm, pneumatically retractable. 2 stop rails in Y direction and 1 stop in X direction right (as seen from the front of machine). Remote maintenance capability Integrated network card for transfer of control and program data. Data transmission via high-speed internet connection. Requirement: High-speed internet connection at the machine. USB port For data backup and for directly importing processing programs at the control panel. Lsdpfxewxz Uyo Ab Usah TECHNICAL DATA Working dimensions 7535 10.5: Max. nesting table surface: X = 3100 mm, Y = 1560 mm Max. travel paths: X = 4695 mm, Y = 2305 mm, Z = 565 mm Max. machining height 7535/7735 Classic without pusher: Z = 300 mm from table top (excluding sacrificial plate) Max. pusher clearance height above table for Push/Auto/Lift versions: Z = 250 mm from table top (excluding sacrificial plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE OPERATION SOFTWARE CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim 1 software license secured via dongle for the machine CAMPUS V7 PLUS software for CNC processing centers: Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with conversational programming and CAD/CAM features for creating part variants using macro technology. Hi-Speed USB-Device Network Server Allows use of the CAMPUS single license on the machine or a PC in the same network. Only one license may be used in the network at a time! Additionally: CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim 1 software license secured via dongle for office or machine CAMPUS V7 PLUS software for CNC processing centers: Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with conversational

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 112290 € 2122.28 € 3020 x 1520 mm Kjellberg Smart Focus 300 80 mm 40 mm 60 mm Lodpfswrmazex Ab Uoah 300 A 100 % A 24 m/min < 1/10 mm 400 kg/m² KJELLBERG Smart Focus 300 plasma source - Manual gas console - Torch: PerCut 4000 - Process gases: Air and oxygen, nitrogen, argon, hydrogen, F5 forming gas - Required hoses and connection cables - Including initial equipment recommended by Kjellberg CNC Workbench software (external PC not included) Cutting table with guide and drive system including flap-controlled extraction table with support grid Handheld control unit CAD-CAM control software cnc-workbench plasma Serial connection cable Operating manual Guide system and drive - Hardened precision round steel guides with adjustable V-shaped rollers on the X-axis - Bosch Rexroth profile rail guides on the Y-axis - Drive via hardened racks and pinions - Closed-loop stepper motor drive - Positioning speed 24 m/min - Repeatability better 1/10 mm Software The all-in-one cnc-workbench Plasma software enables quick and easy operation. Changes to dimensions and parameters can be made directly on the machine. The program can be installed on multiple PCs, allowing cutting job preparation to take place in the office. Key functions: - Importing DXF files - Creating simple geometries (circles, rectangles, polylines, etc.) - Post-processing, correction, part definition, duplication - Cutting width correction, lead-in arcs - Manual nesting - Setting the sequence - Parameter database for cutting parameters A PC with Windows XP/7/8.1/10/11 is required for operation (not included). INCLUDES THE FOLLOWING OPTIONAL FEATURES: Setup laser pointer, simplifies workpiece setup, contour tracking before cutting, THC torch height control, fully automatic torch distance control via the arc voltage, OPTION: Extraction system with filter system

Condition: ready for operation (used), functionality: fully functional, cutting speed: 100,000 mm/min, cutting range round steel at 90°: 360 mm, cutting range square steel at 90°: 360 mm, empty load weight: 2,300 kg, Equipment: chip conveyor, TECHNICAL DETAILS Working range round: 360 mm Working range square: 360 x 360 mm Bundle working range (W x H): 180 - 280 x 50 - 160 mm Cutting speed: 20 - 100 m/min (stepless) Saw blade dimensions: 4,420 mm x 34 mm x 1.1 mm Saw blade tensioning: hydraulic Multiple feed: 500 mm MACHINE DETAILS Drive power: 3.7 kW Dimensions & Weight Machine dimensions (L x W): 2,500 x 2,200 mm Machine weight: 2,300 kg EQUIPMENT Hydraulically controlled full-stroke double vise clamping system Lodpfx Abexculwo Usah Drive by IE3 motor with frequency inverter (PMSM, equivalent to IE4) User-friendly PC control with touch screen Feed speed displayed on HMI (10" HMI display) Automatic chip conveyor Automatic shuttle feed IC board control for all electrical and hydraulic functions Floating swing vice Two-part front vice Stepless speed control via inverter Hydraulic blade tensioning Roller bearings with hydraulically controlled carbide blade guide system Automatic working height control via quick start sensor Preset cutting counter with shutdown function Nesting device for bundle cutting (hold-down) Power-driven blade cleaning brush Saw blade monitoring for standstill and blade breakage Rinse hose for machine cleaning Work light Roller table, 2 m in length One M42 bi-metal bandsaw blade One set of tools and a toolbox Full cover

Condition: like new (used), Year of construction: 2023, Edgebanding Machine SCM Model: olympic 500 HP 'T-ER2' Offer type: LEASE RETURN, Used machine Availability: Immediately Location: Austria Condition: Like new Year of manufacture: 2023 GENERAL DESCRIPTION: A complete and versatile edgebander for small and medium-sized enterprises, capable of processing a wide range of materials to high quality standards in a compact footprint. The SCM Olympic 500 features electronic adjustment devices and allows for the processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for the human-machine interface (HMI) • Maestro connect: Prepared for later installation without gateway • Dual-radius processing, beveling on all units with multi-blade tooling: - Fine-trimming and radius scraper unit, radius = 1 mm - Fine-trimming and radius scraper unit, radius = 2 mm • Electronically positioned pressure beam OPTIONAL EQUIPMENT: Lasdpeq A Tyzsfx Ab Ush Workpiece spacer at infeed KIT “SAV€NERGY” Cabin and edgebanding area internal lighting “Nesting” tracing roller kit Release agent spray unit “AAR” Edge finishing spray unit Spray unit for sensitive edges Jointing milling unit “RT-V1” “EASY SIZE” device – electronic quick adjustment for jointing milling unit Glue pot “VC-VM” Ceramic infrared lamp for workpiece preheating Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Chamfer and radius milling unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3’ – automatic changeover between straight/radius/radius positions for “Round 2-A Multiedge 1R” unit Radius scraper unit “RAS-HP Multiedge 2R” Flat scraper unit “RC-N” Buffing unit “SP-V” MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!!

Condition: new, Year of construction: 2024, Edge Bander F4 Brand new machine Year: 2024 Edge banding machine with PLC control system (touchscreen included) and glue application system for edge materials up to 3 mm thick: - Pre-milling unit (with diamond tools) for up to 2 mm thick panels - Quick-heating glue pot with coated, maintenance-free interior - Pre-equipped for interchangeable glue pots (hot glue change system included) - High-frequency end trimming station (~12,000 rpm) - High-frequency milling station (~12,000 rpm) with independent pneumatic adjustment and reversible panel saw (combined execution) - Robust feed chain - Double-roller top pressure unit (on ball bearings) - Rear window for visibility Lodpoxf H Snsfx Ab Ujah - Extendable front support arm - Feed speed approx. 10 m/min OPTIONS ON STOCK MODEL: - Quick-change device for corner milling unit (F4/08/4) - Nesting unit (for milling and radius scraper stations) (F4/27) - Pneumatic adjustment on three points (straight, bevel, radial cuts) (F4/30) - Internal LED lighting (F4/32)

Condition: as good as new (ex-display), functionality: fully functional, Edgebander with most accessories in its technological range, with an excellent quality/price ratio. Work table dimensions 3465 x 710 mm Min. ÷ max. thickness of rolled edges 0,4 ÷ 3 mm Max. thickness of edges in strips 5 mm Min. ÷ max. panel height 8 ÷ 50 mm Min. panel length/width 190/110 mm Feed speed 9 m/min This edgebander increases productivity with the feed track of the panel brought to a speed of 9 m/min and it guarantees high quality standards in processing thanks to the possibility of working with polyurethane glue, perform grooves, all being extremely easy to use. Lajdeqw Ux Tjpfx Ab Ush MACHINE COMPOSITION: ME 40TR AUTOMATIC EDGE BANDER 109999 Security execution R00341 me 40tr versione CE 930731 Volt 400 EU 931201 Frequency 50 Hz 580653 EDGE SCRAPING UNIT 580444 BRUSHING UNIT 580654 GLUE SCRAPING UNIT 580656 Spare glue pot for poliurethane glue with fast unloading system 580509 Device for the panel edge heating 580510 Anti-adhesive unit 580548 Spray-mist device for edge finishing 580658 "Nesting" copying device kit for Trimming unit 580659 "Nesting" copying device kit for Edge scraping unit 580666 Internal machine lightening

Condition: new, laser power: 3,000 W, travel distance X-axis: 200 mm, travel distance Y-axis: 6,500 mm, travel distance Z-axis: 300 mm, DESCRIPTION K12C Two-chuck High-speed small tube laser cutting machine The K Series high speed small tube laser cutting machine, independently developed and produced by Baison Laser, is specifically designed for the high-speed cutting of a large batch of small metal tube materials in various sizes and shapes. It reliably cuts a variety of metal tubes, including round, square, rectangular, I-beam, angle iron and special-shaped tubes, crafted from stainless steel, carbon steel, and other metals. Technical specifications Tube size range "Round tube: φ10-φ120mm
 Square tube: □10*10-□120*120mm (> R10 mm)
Channel Steel: 8#（need nesting software and specialized work-holding fixtures） 
 Angle Iron: 8#（need nesting software and specialized work-holding fixtures）" Laser Power: 3.000 W (Raycus) Max. Single Tube Weight: 80 kg Chuck Stroke: Full stroke Max. chuck speed: 180 r/min Max Speed: 100 m/min Max Acceleration: 1.5 G Max.Tube Cutting Length: 6.500 mm Tail Material: ≥60 mm X-axis: 200 mm Y-axis: 6.500 mm Z-axis: 300 mm Positioning Accuracy (X/Y): ±0.03 mm/m Repeated Positioning Accuracy (X/Y): ±0.03 mm Power Data: 19.8kw/51A Lajdpfxexfrlae Ab Ujh Power supply: 380V/50Hz/3Phases Machine Size: 9.550*1.850*2.135 mm Machine Weight: 3.250 kg (Including automatic loading frames)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25230 € 481.89 € 1250x2500 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm Lsdpfxewiryuj Ab Usah 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.820,- € 28.440,- € 30.100,- € 33.290,- (Hypertherm MaxPro200 and KJELLBERG plasma sources available on reques) OPTIONS: water tank to quickly fill and drain thetrough € 2.560,- height adjustment by arc voltage € 2.450,- set-up laser € 240,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 3,117 mm, travel distance Y-axis: 1,557 mm, travel distance Z-axis: 150 mm, rapid traverse X-axis: 25 m/min, rotational speed (max.): 24,000 rpm, spindle motor power: 14,000 W, number of spindles: 20, number of slots in tool magazine: 18, The new generation of Nesting CNC machining centers for flexible and batch-1 production combines excellent performance for increased flexibility and productivity. FLEXIBLE - Any way of processing without removing the spoilboard, even in 3D thanks to X-PODs and JQX (Just Quality eXtreme) 5-axis electrospindle. PRO-SPACE safety system - max speed of X axis = 25 m/min. TABLE dimensions X= 3117 mm Y= 1557 mm; Z axis = 150 mm Electrospindle 14kW - up to 24,000 rpm; HSKF63 reception RO.AX F20LLR drilling head with 12 vertical and 8 horizontal drilling spindles FAST18 fast linear tool changer with 18 positions X-POD vacuum slippers – 12 pieces Lasdpfx Aswcqhqeb Ueh MAESTRO CNC and MAESTRO CONNECT (1 year) software

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 28370 € 541.87 € 1500x3000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 630 l 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg Lasdpfxswirx Ro Ab Uoh compressed air powered plasma sourceHYPERTHERM Powermax 45 CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 29.960,- € 31.580,- € 33.240,- € 36.420,- (Hypertherm MaxPro200 and KJELLBERG plasma sources available on reques) OPTIONS: water tank to quickly fill and drain thetrough € 3.500,- height adjustment by arc voltage € 2.450,- set-up laser € 240,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu Laodswirpcspfx Ab Ush ca. 12 - 14 Wochen ab Auf Türkei 209800 € 3896.66 € 20 to 2000x1250 mm 2000 mm 1250 mm 90 m/Min 70 m/Min 114 m/Min 1100 1/Min 375 1/Min 1200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 30 U/Min 150 U/Min 100 kg 940 mm 6 bar 88.9 mm 7.5 kW 5600 mm 6600 mm 4200 mm 6200 mm 2310 mm 11000 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index: 12,8 - 31,7 mm 1 x C-Station fix: 31,8 - 50,8 mm 1 x C-Station Index: 31,8 - 50,8 mm 2 x D-Station fix: 50,9 - 88,9 mm Infra-red light barriers according to CE rules

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 214704 € 6 kW Wechseltisch 20 mm 15 mm 20 mm 10 mm 12 mm 3.048 x 1.530 mm 3060 mm 1530 mm 140 mm 3.048 x 1.524 mm 90 m/min 90 m/min 127 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm FIBER LASER HESSE HD-FO MADE BY DURMA The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The shuttle table is positioned at the front, making this system ideal for customers who do not have sufficient space for classic longitudinal positioning. Optionally, the HD-FO can also be equipped with a manually extendable table. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. Laodpfx Aewirmzjb Ush The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Slug box Working area lighting Multi-chamber suction system Remote maintenance access Equipped according to CE guidelines OPTION: suction unit with filter manually extendable table Further options as Durma cloud on request.

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 202245 € 3694.95 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm Ljdowiq T Topfx Ab Uoah 12 mm 28,5 kW 3060 x 1525 mm 3060 mm 1525 mm 125 (275) mm 3084 x 1524 mm 240 kg/m² 2160 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s FIBER LASER HESSE HD-FN MADE BY DURMA The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Equipped according to CE guidelines OPTION: Extraction with filter unit

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 203565 € 3910.45 € 4 kW Wechseltisch 20 mm 10 mm 12 mm 6 mm 10 mm 3.048 x 1.530 mm 3048 mm 1530 mm 125 mm 3.048 x 1.524 mm 90 m/min 90 m/min 127 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm FIBER LASER HESSE HD-FO MADE BY DURMA The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The shuttle table is positioned at the front, making this system ideal for customers who do not have sufficient space for classic longitudinal positioning. Optionally, the HD-FO can also be equipped with a manually extendable table. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Slug box Working area lighting Multi-chamber suction system Remote maintenance access Equipped according to CE guidelines OPTION: suction unit with filter Laodpfx Abjwiq T Hj Ush manually extendable table Further options as Durma cloud on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 22750 € 436.8 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules alternative plasma sources: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm Ljdpewiq Scsfx Ab Ueah recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.340,- € 25.960,- € 27.620,- € 30.800,- (Hypertherm MaxPro200 or KJELLBERG plasma sources available on request) options: water tank to quickly fill and drain thetrough € 2.560,- height adjustment by arc voltage € 2.450,- set-up laser € 240,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 163101 € 3082.61 € 2000x6000 mm Hypertherm XPR 170 CORE 60 mm 38 mm 38 mm 35 mm 22 mm 25 mm 170 A 12 m/min 35 m/min +/- 0,1 mm 0,1 mm 6000 kg HyPerformance plasma power sourceHyperthermXPR 170 COREWITH "TRUE HOLE" TECHNOLOGY Automatic gas console Plasma torch height control Collision protection (torch brake away system) CNC control with Aurora Software Lantek CAD/CAM software with auto nesting Control of filter unit by CNC Remote control diagnostic by Ethernet Cutting plate alignment function User manual in GERMAN or ENGLISH Options: Suction with filter Morepricefor Optimix instead of Core Further options as CNC bevel head, drilling head, oxyfuel torch, Durma cloud etc. on request. Lsdpfx Abjwiq Has Ueah

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 188945 € 3571.06 € 6 kW Manueller Tisch 20 mm 15 mm 20 mm 10 mm 12 mm 3.048 x 1.530 mm 3048 mm 1530 mm 125 mm 3.048 x 1.524 mm Lasdpfjwiq Dxox Ab Ueh 127 kg/m² 90 m/min 90 m/min 127 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 6600 kg FIBER LASER HESSE HD-FO MADE BY DURMA The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software LANTEK for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Slug box Working area lighting Multi-chamber suction system Remote maintenance access Equipped according to CE guidelines DIMENSIONS: Lenght of Guiding Machine: 5.600 mm Width of Guiding Machine: 2.700 mm Height of Guiding Machine: 2.130 mm Height of Guiding Machine when loading door are open: 2.725 mm Length of exhausting unit: 2.500 mm Width of exhausting unit: 1.400 mm Dimensions according to layout plan 8.500 x 5.500 mm OPTION: exhaust unit with filters shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time Further options as Durma cloud on request.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 177806 € 3360.53 € 4 kW Manueller Tisch 20 mm 10 mm 12 mm Lajdpfx Ajwiqzqeb Ujh 6 mm 10 mm 3.048 x 1.530 mm 3048 mm 1530 mm 125 mm 3.048 x 1.524 mm 127 kg/m² 90 m/min 90 m/min 127 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 6600 kg FIBER LASER HESSE HD-FO MADE BY DURMA The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software LANTEK for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Slug box Working area lighting Multi-chamber suction system Remote maintenance access Equipped according to CE guidelines DIMENSIONS: Lenght of Guiding Machine: 5.600 mm Width of Guiding Machine: 2.700 mm Height of Guiding Machine: 2.130 mm Height of Guiding Machine when loading door are open: 2.725 mm Length of exhausting unit: 2.500 mm Width of exhausting unit: 1.400 mm Dimensions according to layout plan 8.500 x 5.500 mm OPTION: exhaust unit with filters shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time Further options as Durma cloud on request.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 191106 € 3611.9 € 4 kW Wechseltisch 20 mm 10 mm 12 mm 6 mm 10 mm 27,5 kW 3060 x 1525 mm 3060 mm 1525 mm 125 (275) mm 3048 x 1524 mm 240 kg/m² 2160 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s FIBER LASER HESSE HD-FN MADE BY DURMA The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Lasdpfxowiqtaj Ab Ujh Integrated cooling unit for cutting head and laser source CAD/CAM software for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Equipped according to CE guidelines OPTION: Extraction with filter unit

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 154988 € 2929.27 € 3 kW 12 mm 6 mm 6 mm 3 mm 6 mm 26,5 kW 250 mm 16 mm 160 x 160 mm 200 x 150 mm 6000 mm 58 kg/m +/- 0,2 mm +/- 0,05 mm rund, quadratisch, rechte 40 m/min 94 m/min 30 m/min 510 °/s The machine consists of the following components: Lsdpfewiqr Ajx Ab Uoah - Encapsulated cutting room with protective glazing - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request