Used Nardini Ms 175 E for sale (12)

Condition: good (used), Year of construction: 1991, machine/vehicle number: DO-JAO-011, Offer 24306 Technical data: - Center height 175 mm - Turning diameter 330 mm - Center distance 800 mm - Spindle holder according to DIN - Spindle bore 46 mm Nwsdpfxst H I Uys Af Een - Taper of the tailstock quill MK 3 - Travel of the tailstock quill 120 mm - Spindle speeds 6.3 - 2500 rpm - Longitudinal + flat feeds - Drive 400 V / 6 kW - with: - 3-jaw chuck - SWS steel holder with 1 insert - chip tray - coolant device - lighting - Space requirement approx. W 1850 x H 1750 x D 990 mm - Weight approx. 850 kg

Condition: used, Year of construction: 1994, turning diameter over bed 350 mm turning diameter over slide rest 310 mm turning length 700 mm total power requirement 4,6 kW weight of the machine ca. 1,0 t Dimensions (HxWxD) 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm --> Height: 300 mm --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - 0.929 mm Rev Nwodpfx Aewc Dzwof Ejn --> Cross feeds (128): 0.015 - 0.338 mm Rev 3 - jaw chuck Multifix steel holder size B, 1 x inserts 2 x travelling steady rest, Operating instructions

Condition: good (used), Internal Article No.: 25013 Leadscrew and Feedshaft Lathe Nardini MS 175E Year of manufacture: 1986 The machine is equipped as follows: Nwedjwdu R Sepfx Af Esn + 3-jaw Röhm chuck 160 mm - Multifix tool post incl. 2 x tool holders - MK3 drill chuck - 2 x revolving centre - Operating manual / electrical wiring diagram - Collet chuck 185E, incl. one collet - 2 x steady rest - Chuck flange - 6 machine feet Technical data: Centre distance: 800 mm Centre height: 175 mm Tailstock quill: MK3 Tailstock quill travel: 130 mm Total power requirement: 4.8 kW (380V / 16A) Spindle nose: DIN 55022 / Size 5 Spindle bore: 46 mm Speed range: 25 - 2000 rpm Bed width: 220 mm Dimensions (LxWxH): 220 x 150 x 120 cm Weight: approx. 1000 kg The machine is fully functional and can be inspected under power by prior arrangement.

Condition: good (used), functionality: fully functional, Price incl. 3-jaw chuck + digital readout + Multifix tool post! .....Additional accessories available on request at extra cost!..... Nsdew Dfa Repfx Af Eswn Distance between centers: 800 mm Center height over bed: 175 mm Spindle bore: 46 mm 18 speed ranges, stepped: 25 - 2000 rpm Power approx.: 2.2 / 4.4 kW..... More accessories available at additional cost!

Condition: good (used), Centre height: 175 mm Distance between centres: 800 mm Swing diameter over bed: 350 mm Swing diameter over cross-slide: 310 mm Spindle bore: 46 mm Nwsdpfxoxc Ewws Af Eon Speed range: 25 - 2000 rpm With digital readout

Condition: good (used), Leadscrew & feed rod lathe "Nardini MS 125 E" - Center height over bed: 150 mm - Swing over cross slide: 140 mm - Distance between centers: 500 mm - Spindle speeds: 50–2500 rpm - Spindle bore: 34 mm - Automatic longitudinal / cross feeds - Threading: metric / imperial - Tailstock taper: MK 3 - Multifix toolpost with inserts - Quick-action collet chuck type 173 E incl. 16 collets - Change gears - Tool cabinet incl. various accessories - Machine mounts - Chip guard rear panel - Drill chuck / live center - Work light - Documentation Dimensions: LxWxH: 1.6 x 0.7 x 1.6 meters / Weight: 1250 kg Errors and omissions excepted. Nsdpow Al Ulsfx Af Eswn

Condition: good (used), functionality: fully functional, turning diameter: 360 mm, turning length: 700 mm, total length: 1,800 mm, total width: 900 mm, total height: 1,600 mm, overall weight: 1,000 kg, center height over top slide: 120 mm, NARDINI MS 175 E Lead and Feed Screw Lathe TECHNICAL DATA & FEATURES: - Operating voltage: 380 V - Frequency: 50 Hz Njdjw U Tr Ijpfx Af Eown - Control voltage: 220 V - Power connection: 4.8 kW - Spindle bore: approx. 48 mm - Centre distance: approx. 700 mm - Centre height over bed: approx. 180 mm - Swing over bed: approx. 360 mm - Centre height over cross slide: 120 mm - Swing over cross slide: 240 mm - The machine is equipped with a tailstock, a Multifix quick-change tool holder, a quick-action chuck, various steady rests, and a digital readout - REFERENCE NUMBER 18 DIMENSIONS & WEIGHT: - 1800 x 900 x 1600 mm - 1000 kg COLLECTION NOTES: - The item will be available from September 2025. A collection appointment must be scheduled on a specific day starting from 01.09.2025. - FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Year of construction: 1987, condition: ready for operation (used), A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible. Nwedpfx Aoxq Eyzsf Esn

Condition: good (used), Technical data: - Center height 220 mm Nwodeqff D Ijpfx Af Eon - Turning diameter over bed 440 mm - Center height over bridge 330 mm - Turning diameter in the offset 630 mm - Center height / turning diameter over support 135 / 270 mm - Center distance 1000 mm - Spindle bore 52 mm - Taper of the tailstock quill MK 4 - Travel of the tailstock quill 310 mm - 18 spindle speeds 25 - 2000 rpm - feeds longitudinal + plane - metric thread / Withworth thread / modular thread / DP thread - Drive 400 V / 6 kW - 4-jaw chuck with interchangeable jaws and center point, new Multifix size B with 3 inserts

Condition: excellent (used), functionality: fully functional, spindle bore: 52 mm, turning diameter: 440 mm, center height: 220 mm, turning length: 1,500 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, Very well-preserved machine with good equipment Nodpfx Ajw T Tq Iof Ejwn Technical data and accessories are listed in the offer! . .

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 570 mm, turning diameter: 800 mm, center height: 400 mm, center width: 4,000 mm, turning length: 3,800 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 800 mm Center height: 400 mm Turning length: 3,800 mm Distance between centers: 4,000 mm Max. swing diameter over cross slide: 570 mm Max. swing diameter in gap: 1,130 mm Work spindle Spindle head according to DIN: 55027, size 11, internal taper 20 Spindle diameter at front bearing: 165 mm Spindle bore: 120 mm Face plate diameter: 564 mm Max. chuck diameter: 380 mm Max. spindle speed: 750 rpm Nedpfxsw Rqrwo Af Eswn Tailstock Quill taper: Morse 6 Quill diameter: 110 mm Max. manual quill stroke: 310 mm Feed rate Longitudinal carriage: 0.092 - 1.590 mm/min Cross slide: 0.046 - 0.795 mm/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6600 x 1850 x 2250 mm Weight: 10,900 kg EQUIPMENT Comprehensive accessory package included.

Condition: ready for operation (used), Year of construction: 1989, turning diameter over bed 440 mm turning diameter over slide rest 270 mm turning length 1000 mm turning dia. in gap 630 mm centre height 220 mm spindle head DIN 55027/6 spindle bore 52 mm bed width 270 mm spindle turning speed range 18, 25-2000 U/min total power requirement 6/3 kW weight of the machine ca. 1,350 t Nodpswmwv Ajfx Af Eewn dimensions of the machine ca. 2,5 x 1 x 1,47 m Universal lathe with a turning diameter of 440 mm and a turning length of 1000 mm. The machine was only used sporadically for rework. Machine dealer with own stock of 1600 m².