Used Multiple Rip Saw for sale (8,056)

Condition: used, Year of construction: 2006, functionality: fully functional, cutting height (max.): 170 mm, saw blade diameter: 450 mm, cutting width (max.): 450 mm, – Year of manufacture: 2006 – Original paint TECHNICAL SPECIFICATIONS: – Main motor: 30 kW – Feed motor: 1.5 kW – Cutting height: 170 mm – Cutting width: 450 mm – Max. blade diameter: 450 mm – Two upper pressure rollers – Two lower feed rollers – Spindle diameter: 70 mm – Feed speed adjustable via gear motor – Three rollers before and after the saw – Roller length: 64 cm Nodpfoxqlu Ejx Ad Necl – Dimensions (L/W/H): 280 x 140 x 160 cm – Weight: 1100 kg

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Ncodpfsmk E D Iox Ad Njl Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: excellent (used), functionality: fully functional, saw blade diameter: 350 mm, chain width: 300 mm, extraction nozzle diameter: 150 mm, working height: 110 mm, type of input current: three-phase, height adjustment type: mechanical, saw blade bore: 70 mm, spindle diameter: 48 mm, OGAM PO-280 Track Multirip Saw Specification: • Condition – used, after complete overhaul • Manufacturer – OGAM • Model – PO-280 • Track width: 300 mm • Max working height – 110 mm • Main motor power: 25 HP (~18 kW) • Maximum blade diameter: 350 mm • Spindle Ø48 mm, sleeves Ø70 mm • Track feed speed adjustment range: 5–40 m/min • Track in very good condition, no wear • Extraction nozzle Ø150 mm • Weight – approx. 2000 kg • Overall dimensions – 190 x 150 x 165 cm (W x L x H) Additional information: Nsdpfoxtc Iujx Ad Njcl • The machine is in very good technical condition, ready for immediate use • The photos shown represent the actual condition of the item for sale • Test running and inspection of the machine on site are possible.

Condition: good (used), Year of construction: 2010, RAIMANN Econorip 310 multi-saw - German production - CE marking - Quickfix disc sliding system - year of production 2010 TECHNICAL PARAMETERS: - cutting height 110 mm - cutting width 340 mm Nedpfsh Tm Alsx Ad Nocl - engine power 22 kW - adjustable feed on the inverter - electric shaft height adjustment - electric adjustment of the pressure height - spindle in the Quickfix system (the possibility of changing the dimensions without the need for tools) - track diameter max 350 mm - spindle diameter 65 mm - sleeve diameter 80 mm - four upper pressure rollers - four rows of anti-jet pawls - boot for short elements - max width of the element 700mm - minimum element length 300 mm - central lubrication - diameter of the stub pipe 250 mm - ruler Machine dimensions: 190x185x165 cm weight 1800 kg

Condition: used, functionality: fully functional, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, type of input current: three-phase, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW Nsdjw H R R Hspfx Ad Nscl – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, MULTIRIP CIRCULAR SAW AND EDGER - IN ONE MACHINE 20-160: 🔹 Main Drive Motor: 37–75 kW for consistent, powerful cutting Ncodjwf Ihtepfx Ad Nsl 🔹 Flexible Cutting Configuration: • 1–4 fully adjustable movable - HYDRAULIC OR SERVO - heads • 1 fixed head, with the option to mount multiple fixed circular blades 🔹 Customizable Board Width: Up to 1000 mm or 1300 mm — tailored to your production needs 🔹 Advanced Mechanisation Options: • Manual or motorized feeding • Centering systems for precise positioning • Outfeed conveyors with integrated sorting lamellas for efficient waste handling • Fully adaptable to your specific requirements Built for durability. Engineered for precision. Designed to optimize your production flow. 👉 Contact us today to customize your EDGER 20-160 to your exact specifications!

Condition: new, Type MJ1435F Feed speed (inverter) 6-35 m/min. Spindle diameter 70 mm Diameter of sawblades 250-355 mm Njdpfx Adjd Nlvps Nocl Cutting width 300 mm Cutting height 100 mm Min. cutting length 360 mm Motor power 22 kW Total power 26,1 kW Transport dimensions 2670x1200x1500 mm Weight 1700 kg Delivery term: ~ 3 months.

Condition: new, Type MJ1412-40 Feed speed (inverter) 9-35 m/min. Spindle diameter 70 mm Diameter of sawblades 355-405 mm Nedpfxsitvfpe Ad Nscl Cutting width 400 mm Cutting height 100/115 mm Min. cutting length 290/480 mm Motor power 37 kW Total power 42,1 kW Transport dimensions 3000x1300x1500 mm Weight 2000 kg Price 22450 Eur (EXW Jonava, Lithuania)

Condition: like new (used), Cutting width mm: 310 Cutting height mm: 120 Chain width mm: 340 Workpiece length min mm: 700 Saw blade diameter max mm: 360 Feedrate max/min: 5/48 Saw revolutions rpm: 3900 Working height mm: 850 Motor Kw: 37 Ncjdpfx Adshm E Ncj Nel Weight Kg: 3500

Condition: like new (used), I sell the multirip saw of italian production SCM M3. Cutting height under the blade 120mm / possibility of adjustment Nodpfxjvll Eks Ad Necl Width of cut on the feed belt max. 300mm. Open design / possibility to insert wider workpieces Motor approx. 20KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator. Total weight approx. 2500kg. Blades and adjusting rings included. Feeding band very good condition. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: excellent (used), chain width 320mm cutting height 120mm max blades diameter 350mm Nsdpfx Adjw A H Dhe Necl shaft diameter 70mm shaft speed 3700 RPM two feeding speed iron cast body motor power 37kW weight 2200kgs

Condition: excellent (used), Outfeed table for multirip saw witich floating blade Raimann DTF Nedpfx Ajw A H Dued Njcl

Condition: excellent (used), chain width 320m cutting height 120mm Motor power: 30 kW max blade diameter 350mm shaft speed 3700 RPM Ncjdpfew A H Aksx Ad Nel shaft diameter 70mm variable regulated feeder 4-24m/min iron cast body

Condition: good (used), chain width 200mm motor power 18,5kW max material heigth 120mm Refurbished track variable regulated feeder manual regulation of pressure rolls Ncedpfxew A H Awj Ad Nol manual regulation of shaft max blade diameter 350mm

Condition: used, Technical data: Noderi Si Dopfx Ad Njcl Max saw diameter: 600 mm Min saw diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Max cutting height: 210 mm Max saw blade advance width: 500 mm 2 pneumatic clamps Extraction spigot diameter: 155 mm Work table dimension: 790x910 mm Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm

Condition: excellent (used), Year of construction: 1985, Costa Leopard Cutting height: 160 mm Cutting width: 350 mm Engine power: 2 x 37 kW Njdpfx Ael Tf N Hjd Nocl Weight: 4200 kg

Condition: reconditioned (used), Year of construction: 1998, machine overhauled, major overhaul - year of production 1998 TECHNICAL PARAMETERS: diameter of the main saw ⌀ 350 mm max. sawing height 70 mm max. sawing width 150 mm engine power 3 kW rotational speed of the spindle 4500 rpm diameter of spindle tip ⌀ 30 mm nominal pressure of compressed air 0,6 Mpa frequency of working cycles 0 - 28 cycles/min max. stroke of saw 100 mm connection diameter of suction nozzle 1 x ⌀ 125 mm air demand (in dust extraction system) 1300 m3/h Nedpfx Aot Dxwajd Necl height to table surface 850 mm weight 160 kg The DMDK-35 circular saw is used for transverse sawing of wood. The maximum cutting width is 220 mm with a height of 35 mm. The saw is controlled by a foot switch. The saw guard assembly is equipped with safety curtains. The material is pressed with two point presses. This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min. The saw is often used to manually cut out defects in the material. net price invoice va

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. Nodsq Nfuzspfx Ad Necl 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: excellent (used), functionality: fully functional, overall weight: 50,000 kg, total height: 5,400 mm, total width: 4,500 mm, total length: 14,000 mm, feed length X-axis: 800 mm, rotational speed (max.): 80 rpm, 80-blade gang saw with top cutting quality, easily achieving C120 surface finish, so no honing is required. Blade stroke: 800 mm. Number of blades: 80 Blade length: 4,350 mm Motor power: 110 kW Cycles per minute: 85 Ncsdpfjv D Napsx Ad Nol Voltage: 400V/50Hz Machine weight: 54,000 kg Useful cutting area: 3,200 x 2,000 x h 2,000 mm Overall dimensions: 13,600 x 4,500 x h 5,400 mm Includes 2 block trolleys. More data or pictures available upon request. One brass drawback sleeve is required to be renewed during relocation. Machine is fully functional and in top condition.

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece Ncsdpfsb A N Alox Ad Nel -Quantity: 180 pieces available -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available Nedpfxob A N Aks Ad Nocl -Weight: 2 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Ncsdswxmhlepfx Ad Nol Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: used, Three head band saw IDC000093 - manufacturer: Talsu - each electric motor: 11 kW Njdpfx Adsupt Sij Nscl - for square log cutting - with electric cabinet - hydraulic station - three head - for sawing pallet boards - feed chain - feed pushers from the top

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type negotiated Description Notes Ncsdpfsb Rnv Sex Ad Njl Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Ncsdpod H Hmhsfx Ad Njl Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT