Used Multiple Rip Saw for sale (8,349)

Condition: new, Year of construction: 2026, I am selling this excellent helper in a carpentry workshop or a smaller sawmill for preparing plastered lumber and producing boards. This is a double-blade edge saw / Rip saw KUSING OP-400 ECO. Motor power: 2x 4kW Maximum cutting height: 55mm Feed speed: 4-18 m/min Maximum material width: 600mm Maximum width between blades: 400mm The machine's primary purpose is as a complementary machine to smaller band saws. The machine rapidly speeds up the process of producing boards, saving time in their production. With a special option, it is possible to adjust and extend individual shafts by 55 to 105mm, thanks to which you can place up to 4 blades in the machine at once. KUSING OP-400 ECO Double-Blade Rip Saw Are you looking to speed up board production in your carpentry workshop or smaller sawmill? The KUSING OP-400 ECO is the perfect partner for preparing planed lumber and turning logs into boards quickly and efficiently. _____ Why Choose the OP-400 ECO? • High Productivity: Dual 4 kW motors ensure consistent cutting power, allowing you to process lumber faster than with a single-blade setup. • Versatile Cutting Capacity: o Max. Cutting Height: 55 mm o Max. Material Width: 600 mm o Max. Distance Between Blades: 400 mm • Efficient Feed System: Adjustable feed speed from 4 to 18 m/min gives you precise control over material flow for different wood densities and board thicknesses. • Expandable Blade Configuration: With the optional shaft-extension kit, you can extend each shaft from 55 mm up to 105 mm, accommodating up to four saw blades simultaneously. This means you can rip multiple boards in a single pass, dramatically reducing setup times. • Ideal Secondary Machine: Designed as a complement to smaller bandsaws—speed up your workflow by rough-cutting logs into boards before final dimensioning. Dwodox Utv Iepfx Al Asc Technical Specifications • Motors: 2 × 4 kW • Maximum Cutting Height: 55 mm • Feed Speed Range: 4 – 18 m/min • Maximum Material Width: 600 mm • Max. Blade Gap (between blades): 400 mm • Shaft Extension (optional): 55 – 105 mm (fits up to four blades) The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: new, Year of construction: 2026, I am selling this industrial heavy-duty rip saw RS-ES-800 KUSING. The machine is in stock in Kežmarok (Slovakia). It is an industrial heavy-duty rip saw intended for processing soft and hard lumber of larger cross-sections with multiple blades. Technical parameters • Number of blades: up to 15pcs (+ 3pcs on the movable unit) • Motor power: 37 kW (standard), adjustable according to requirements • Machine weight: 3 500 kg • Pressure roller lift: Electric, controlled from external panel • Blade positioning: Electric, via computer • Number of feed rollers: 6 + 3 (upper and lower) • Front traction roller: Positioned in front of the wedges for rapid ripping • Extraction system: Upper and lower dust extraction for maximum cleanliness • Material width: 800 mm Multi-blade solution: - Possibility to install up to 15 blades + 3 movable blades. - Movable unit with a separate space for 3 blades, each 110 mm in length. Power: - Standard motor 37 kW (adjustable according to customer requirements). - Feed motor power 1.5 kW. Material feed: Dwedox Uty Tjpfx Al Aec - A total of 9 feed rollers (6 + 3) ensures even advance and prevents torsion of the lumber during cutting. - Front traction roller placed in front of the wedges minimizes kickback and significantly facilitates feeding of boards or tall timbers. Electric control: - The lift of the pressure rollers and blade positioning are performed electronically via an external control panel, which increases the speed of setup during line ripping. Perfect dust extraction: - Integrated extraction systems in both upper and lower parts of the machine ensure maximum cleanliness of the workspace. Easy maintenance: - Special construction allows the top cover to be folded up, so maintenance and cleaning of the machine are quick and hassle-free. The specialty of this machine is the front traction roller, which is placed in front of the wedges against kickback—this speeds up feeding boards into the machine and especially helps when feeding tall timbers, as it is not necessary to overcome the resistance of the wedges and the machine pulls the material in by itself. Thanks to the three traction rollers, it is ensured that the material does not tend to twist during the cutting process, thereby increasing the quality of the cut. The machine has excellent dust extraction from both the upper and lower parts, which ensures maximum cleanliness of the machine. The machine is specially constructed to be as easy as possible to maintain and clean. The top cover folds open and allows the operator to easily clean the machine.

Condition: used, power: 11 kW (14.96 HP), cutting height (max.): 170 mm, total length: 5,850 mm, total width: 2,000 mm, total height: 2,040 mm, overall weight: 3,500 kg, No. 04548 Rip saw / longitudinal circular saw MABA ECO 4200 Used, good condition Automatic longitudinal circular saw with extraction system Cutting length 4200 mm Motor 11 kW Saw blade diameter 350 - 550 mm Saw blade bore 30 mm Hydraulic feed 1 - 80 m/min, infinitely variable, with automatic cutting pressure compensation Cutting height 0 - 170 mm, infinitely variable, circular saw blade lowerable Automatic width stop, hydraulic, infinitely adjustable, LED display for width setting Djdpezcdn Nefx Al Aewc PLC control Rear table width approx. 1500 mm Extraction connection diameter 150 mm Transport dimensions approx. 5850 x 2000 x 2040 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, Year of construction: 2024, MULTIPLE RIP SAW ANGOMAC MAX DEPTH OF CUT 120 MM Max. width of cut 480 mm Dwjdpfx Ash Ia Upol Aoc Max. passage width 600 mm

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. It has 18KW motors. This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. It runs on 30mm blades. Dwedezwh Rcepfx Al Ajc All new power feed sprockets and fully DC braked.

Condition: good (used), Year of construction: 2009, Edger and panel saw in one machine. Max. cutting length: 6.2 m Max. cutting width: 2.1 m Dsdpfxez Abpij Al Ajwc Max. cutting height: 120 mm With alignment laser for the cutting line 2 clamping devices, left and right 6 retractable cross-feed chains in the rear table Saw motor: 11 kW

Year of construction: 2024, condition: new, - 50 mm cutting height - 1210 mm cutting width - 12 driven rollers - 10 - 30 m/min variable feed rate - 37 KW Sawing Motor (more is possible) - 2,2 KW Feed Gearbox - 70 mm Sawing spindle - 225 mm Circular Saws - 4000 Kg weight of the machine Dwsdpfjfdzrhjx Al Aoc

Condition: like new (used), I sell the multirip saw of italian production SCM M3. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 300mm. Open design / possibility to insert wider workpieces Motor approx. 20KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator. Total weight approx. 2500kg. Blades and adjusting rings included. Feeding band very good condition. Dodpfx Aljvll Eke Aswc The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: excellent (used), CATALOGUE NUMBER 7901 Technical specifications: - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1530mm - from above: - ejectors (barrier to prevent material from moving backward) - sliding roller, metal - ejectors - sliding roller, metal - roller with saw blades - 2 smooth sliding rollers, metal - from below: - guide strip - ejectors - track - central track lubrication - stepless feed speed adjustment - feed motor 1.5kW - main motor 22kW - brake - diameter of the dust extraction nozzle 200mm Dwsdezul Akopfx Al Ajc - overall dimensions L/W/H 2300x1370x1570mm - weight approximately 1700kg ADVANTAGES - Made in Italy - Very good condition - DTR documentation - Used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: good (used), Year of construction: 2011, beautiful rip saw with max. 8 m cutting length max. width 1.9 m max. cutting height 160 mm motor 11 kW Dwedpfxswrb Rus Al Asc with laser for cutting joint display with integrated pressure beam

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, cutting height (max.): 110 mm, For sale: a Forma DZ 4 - 450 multi-blade saw with four positionable saw blades equipped with lasers. Each blade is driven by its own 11 kW motor. Maximum timber thickness: 110 mm. Board length: up to 6.0 meters. The set also includes an infeed roller table and an outfeed roller conveyor with side ejectors. Dsdpfszul Dnsx Al Ajwc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1250 mm Weight 1700 kg Dsdpfxjvz Hrko Al Aowc Total power requirement 23,5 kw

Condition: excellent (used), Track width: 25 cm Cutting height: 10 cm Engine: 22 kW Djdpfjy S Rpmsx Al Aewc Ready for immediate use.

Condition: new, Spindle diameter 90 mm Diameter of sawblades 255 mm Cutting width 1600 mm Cutting height 0-50 mm Motor power 37 kW Speed 2800 r/min Djdpsd Nluwefx Al Aowc Feed speed 0-15 m/min. Feeding motor 3 kW Delivery term: ~ 3 months.

Condition: good (used), Year of construction: 2010, RAIMANN Econorip 310 multi-saw Dwodeh Tm Alopfx Al Ajc - German production - CE marking - Quickfix disc sliding system - year of production 2010 TECHNICAL PARAMETERS: - cutting height 110 mm - cutting width 340 mm - engine power 22 kW - adjustable feed on the inverter - electric shaft height adjustment - electric adjustment of the pressure height - spindle in the Quickfix system (the possibility of changing the dimensions without the need for tools) - track diameter max 350 mm - spindle diameter 65 mm - sleeve diameter 80 mm - four upper pressure rollers - four rows of anti-jet pawls - boot for short elements - max width of the element 700mm - minimum element length 300 mm - central lubrication - diameter of the stub pipe 250 mm - ruler Machine dimensions: 190x185x165 cm weight 1800 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1500x1580 mm Dwodevz Hwyopfx Al Aec Weight 2300 kg Total power requirement 40 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1930x1580x1580 mm Dwodpovz Hw Tefx Al Asc Weight 2250 kg Total power requirement 32,57 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1900x1000x1250 mm Dedpfx Aovz Hr Rjl Aewc Weight 800 kg Total power requirement 12,5 kw

Condition: new, Year of construction: 2026, cutting width 450 mm Weight 5500 kg Dodpsyk Icgefx Al Aowc work height max. 850 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1200x1250 mm Weight 1000 kg Total power requirement 16,5 kw Dwjdpfxjvz Htbe Al Ajc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2500x2170x2080 mm Weight 4250 kg Total power requirement 81 kw Dodpfx Asvz Hwtjl Aswc

Condition: used, Technical data: Max saw diameter: 600 mm Min saw diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Max cutting height: 210 mm Max saw blade advance width: 500 mm 2 pneumatic clamps Extraction spigot diameter: 155 mm Djdpfsri Si Dox Al Aewc Work table dimension: 790x910 mm Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately. Dsdpfx Alsmk E D Ij Ajwc

Year of construction: 1982, condition: used, In Good Condition Dwsdpfx Ajdq Ug Isl Aec

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2100x1900x1980 mm Weight 3500 kg Dedpfx Alsvz Hwms Aowc Total power requirement 77,2 kw