Used Multifunctional Bench for sale (5,954)

Condition: good (used), Scharmann - WB 80 / Heidenhain digital display -Travels X/Y/Z 1300x1200x1200mm -Heidenhain digital display -Rotary table - 1200x1200mm -Table load max. 5 tons -Spindle mount MK5 -Automatic feeds 0.053-6.35mm -Rapid traverses Gjdpfx Agjwqz I Debsil -Spindle speeds 24-2880 rpm -Coolant system -Various accessories / tool holders etc. Subject to errors / input mistakes

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. Gijdsvc Aytepfx Agbsl *

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm Gijdexaa Thjpfx Agbel voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: ready for operation (used), Grinding wheel diameter: 250 mm Grinding wheel width: 32 mm Grinding wheel bore: 51 mm Grinding wheel speed: 1450 rpm Grinding wheel drive motor: 1450 rpm Drive power: 0.73 kW Gjdpexpv Aqsfx Agbjil Electrical connection: 380 V, approx. 1.1 kW Required space: 630 x 550 x 1100 mm Weight approx.: 75 kg

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Gedpfx Agjxpqy Rjboil Good condition

Condition: good (used), Stock number: 2993 Manufacturer: WMW Machine number: 15880 Type / Model: BT 2 Drilling capacity: up to 16 mm Gsdpfowvfa Uox Agbeil Spindle mount: Drill chuck Speed range: 355 / 710 / 1,400 / 2,800 rpm Stroke: 100 mm Throat depth: 210 mm Table: 340 x 470 mm Head adjustment: 120 mm Total power: 1.1 kW Accessories/Equipment: Drill chuck Condition: Good, housing slightly damaged Weight: 165 kg Dimensions: 480 x 550 x 1,150 mm

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake Giedpfxexm Rzij Agbsl -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: used, Double Bench Grinder REMA DS 04/150 Rotation: 2900 RPM Grinding wheel: Ø 150 x 25 mm Gisdpfsxr D Aqjx Agbsl Motor power: 0,3 kW Voltage: 380 V Width: 450 mm Depth: 300 mm Total height: 1100 mm Weight: env. 50 KG

Condition: excellent (used), Steel grinding machine REMA Gjdjwv Smnspfx Agbeil 2 speeds 1450–2900

Condition: new, Year of construction: 2025, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Gsdpefx U D Aefx Agboil Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: excellent (used), Drilling capacity -18 mm Spindle taper FEHLMANN Spindle speeds 135-4500 rpm Throat 225 mm Cross table 530 x 255 mm Giedpfx Agjlyrcmebjl Digital read-out Accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2019, TITANIUM PICKLING PLANT Giedsxa Dmlspfx Agbol Comprises 16 tanks Tank – Degreasing, large 1150 x 1000 x 1200/1250 mm Tank – Rinsing Tank – Hot rinse Tank – Etching Circulation pump 1 - Level probe; PTFE 1 - Temperature sensor 1 - Manual top-up DI water valve 1 - Manual lid 1 - Supports 2 Complete titanium pickling plant

Condition: excellent (used), Workbench Brand Garant Kombi, lockable Width 1500 mm Giodowc Nvtjpfx Agbjl Depth 700 mm Height 850 mm Height with pegboard 1330 mm Total width with vise 940 mm Vice Leinen junior 125 Base cabinet with 5 drawers 1 x 50 mm high 1 x 90 mm high 1 x 125 mm high 1 x 165 mm high 1 x 225 mm high

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Width: 600 mm Gijdpfxjxr Dyvj Agbel Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Condition: new, functionality: fully functional, Year of construction: 2025, TI-CAR universal loader 225 The Polish company TICAB offers its own equipment for patching and road maintenance. OUR ADVANTAGES: - we are a manufacturer, - our equipment operates in 57 countries around the world - availability of finished products in stock, - fast execution of individual orders, - production capacity of 50 units per month, - own engineering and design bureau - 12 engineers Giodpsvprpkjfx Agbel - 15 years of experience in mechanical engineering, we have been working since 2009 We offer the TI-CAR 125/225 forklift model as a universal working machine. The stable boom allows you to easily and safely lift loads with pallet forks. The adjustable steering wheel and comfortable seat suspension reduce fatigue from travelling. The dual-pedal steering system allows you to control the movement with amazing precision, even with demanding attachments and difficult terrain. The TI-CAR is an effective tool for a variety of jobs in construction, agriculture, municipal services, with alternating loading into the body, snow removal, soil moving, transporting cargo, levelling the surface. Technical characteristics: Engine - Kubota (Japan), model - 1105; cylinders - 3, or Yanmar (Japan), model 3TNM72 Engine power - 18 kW/25 k/s, Cylinder capacity (cm³): 784-1120 Cooling system - liquid; Hydraulics - HANSA (Italy), Battery (V-Ah): 12-65 Generator (A): 40 Maximum torque (Nm): 72-77,6 Operating speed of the engine, rpm - 3000 The maximum engine speed without load is 3600 rpm; Maximum lifting capacity to a height of 50 cm, kg-800-90 Tipping load with a straight frame, kg-480-780 Tipping load with a bent frame, kg-350-500 Boom lifting time, sec-2.8 Boom lowering time, sec-2.1 Loader weight, kg 1000-2550 Maximum lifting height, mm -2100-2860 Boom self-levelling - for model 225 Operating volumes: Cooling system, (l): 3,1 Engine oil, (l): 5,11 Fuel type - diesel (fuel tank - 18 l) Hydraulic tank (l): 44 Total capacity of the hydraulic system (l): 48. Driving characteristics: Travel speed (km/h)-0-13, Breaking angle-56°, Turning radius in place-1.63 m Boom lift with tipping bucket 210 cm. Wheelbase: Outer wheel diameter (inch) - 23’ Inner diameter of the disc (inch) - 12’ Tyre width (inch) - 8.5’ The cost of the forklift* is as follows Ti-Car 125 - 20450 € with PDS Ti-Car 225 - 22450 € including VAT *All prices are calculated in UAH at the NBU exchange rate on the day of signing the contract Attachments: - Cylindrical sweeper -4800 €. - Brush with a garbage hopper with self-unloading function - 5500 € - Bucket for transporting cargo - 650 €; - Fork for stacking - 650 €; - Blade for snow removal - 1200 €; - Silo fork - 1300 €. - Jaw bucket -670 €.

Condition: used, Double Bench Grinder GREIF Type D 17 Serial No. 05105 Grinding wheel diameter: 175 mm Grinding wheel width: 25 mm Motor power: 0.35 kW Grinding wheel speed: 2800 rpm Power supply: 380 Volt, 50 Hz - Grinding spindle newly fitted with bearings - Original pedestal Required space (L x W x H): 500 x 450 x 1120 mm Gedpfx Agjxciu Tsbeil Weight: approx. 100 kg Good condition

Condition: excellent (used), Working travels 450 x 260 x 560 mm Spindle stroke 120 mm cross table 770 x 320 mm Drilling capacity 25 mm Spindle speeds 55 - 9200 Rpm With DRO With Threading attachement Misc accessories Godstpgcnjpfx Agbsil MARCELS MASCHINEN CH

Condition: new, Continuous drilling capacity in E 335: 18 mm Normal drilling capacity: 20 mm Tapping capacity: M 12 Gedocw H Syopfx Agbsil Spindle: MK 2 Drilling depth: 100 mm throat depth: 225 mm Speed range A: 100 - 2,000 min-1 Speed range B: 200 - 4,000 min-1 Spindle/table distance: 60 to 440 mm Table surface: 345 x 372 mm Column diameter: 90 mm Total height: 955 mm Weight: 110 kg Frequency-controlled three-phase motor: 1.5 kW Powerful, precise universal drill with a wide range of applications. Table/height adjustment via gear rack and worm gear. Three-phase motor, reversing switch right/left rotation, digital speed display, speed adjustment via potentiometer. UNIMAX 2 T with height adjustment from the front. Mains connection 230 V.

Year of construction: 2019, condition: as good as new (ex-display), multifunctional end face mill Make Mitsubishi Type SPX4RO 5034 BT 50 NM diameter 50 mm 157 mm max. cutting depth Gsdpfx Aofcrwcjgbjil 339 mm Total length 190 mm roll length = maximum immersion depth tipped with carbide plates VP 15 TF

Condition: used, Double Bench Grinder STEPHAN-WERKE HAMELN Type SLD 121 Serial No. 1176445 Grinding wheel diameter: 175/145 mm Grinding wheel width: 20 mm Motor power: 0.37 kW Grinding wheel speed: 2800 rpm Mains connection: 380 Volt, 50 Hz - Original base - Side-mounted ball bearing slide with dovetail guide - Universal holder for the sliding carriage Space requirement (L x W x H): 470 x 430 x 1160 mm Weight: approx. 80 kg In good condition Gsdjxciu Hspfx Agbeil

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Giodeuy Sazepfx Agbsl Throat 276 mm Cross table 530 x 255 mm Digital read-out Accessories MARCELS MASCHINEN CH

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Technical data: Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron - Powerful pulling power thanks to powerful Drive motor Scope of delivery: - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides - Workpiece support Gisdpfx Aovnrm Hsgbjl Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge)

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction Gisdpotrpiisfx Agbol - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle Gedpeda Nqxsfx Agboil in stock, available now

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm table surface: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display machine in stock and immediately available Gsdpob Eldnefx Agbjil