Used Multi Spindle Machine for sale (67,632)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, AC motors for spindle speed and feed Chip conveyor No. 2 polygon milling/thread milling devices No. 1 broaching unit No. 1 threading unit No. 1 pick-up with retraction slide No. 1 deburring unit No. 1 rack milling device No. 2 wedge recesses No. 2 marking devices No. 1 carriage on 6th radial CNC axis (Siemens), with X and Z Ksdpfx Asxyghfjhvedi No. 2 sensors for length control of short, non-threaded or first of bar piece, with automatic discharge into bin at 4th and 8th station Giovanni Cucchi integrated bar feeder No. 1 bar elevator Tool holders

Condition: new, Multi-spindle groin drilling machine Kdodpfxsd Rhx Se Ahvei Number of drilling spindles, clamping devices, etc. depending on customer requirements spindles can be controlled individually at your speed. We will be happy to provide you with an offer tailored to your requirements.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, INDEX MS40-6 CNC Multi-Spindle Year of Manufacture: 2011 Commissioned: 2012 Control: Siemens 840D (Dual NCU) Bar Capacity: 40 mm Slide Units Position 1.1: X / Z NC controlled Position 1.2: X / Z NC controlled Position 2.1: X / Z NC controlled Position 2.2: X / Z NC controlled Position 3.1: X / Y / Z NC controlled (Y ± 21 mm) Position 3.2: X / Z NC controlled Position 4.1: X / Z NC controlled Position 4.2: X / Z NC controlled Position 5.1: X / Z NC controlled Position 5.2: X / Z NC controlled Position 6.1: X / Z NC controlled Position 6.2: X / Z NC controlled Position 6.3: X NC controlled, Z fixed Bar Feed IEMCA SIR MS40/33/P magazine bar loader Workpiece Handling Parts chute at spindle position 6 Workpiece conveyor at spindle position 6 Synchronization unit at spindle position 6.1 Kdedpfx Aoxndgzshvsi Parts ejector Coolant feed preparation through counter spindle Back-Working Attachment at slide position 6.2 Up to 3 fixed toolholders Auxiliary Drive Preparation Electrical preparation for 2 auxiliary drives with electronic shaft (positions 1–3), synchronous with main and counter spindle Electrical preparation for 2 auxiliary drives with electronic shaft (positions 4–6), synchronous with main and counter spindle Compatible with auxiliary drives with incremental encoder (double module) Chip & Coolant System Hinge-belt chip conveyor (cross type), discharge height 1200 mm, front discharge with lift pump for filter unit Coolant filtration unit (50 Hz): Coolant tank: 800 L Vacuum rotation filter: 650 L capacity Plate heat exchanger for coolant cooling Heat exchanger pump: 80 L/min 7 bar Low-pressure pump: 300 L/min 4 bar High-pressure pump: 55 L/min 40 bar Safety & Environmental Automatic CO₂ fire extinguishing system with optical/thermal detection Preparation for central exhaust system Shut-off flap for central oil mist extraction Control Options & NC Functions 16/16 freely programmable I/O interface Transmit / Tracyl function (milling cylindrical paths on OD and face) Dual transmit function for Y-axis transformation NC option: counter spindle / polygon turning with electronic shaft Process Monitoring Integrated ARTIS monitoring system based on torque, current, or power evaluation Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 1–3 Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 4–6

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2920x980x1450 mm Weight 1500 kg Kdsdpfxevz Hx Do Ahvji Total power requirement 12 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x2300x1780 mm Kodpsvz Hrdsfx Ahvjdi Weight 4000 kg Total power requirement 27,2 kw

Year of construction: 1982, condition: good (used), IESSE - multispindle boring machine model BEAVER year 1982 manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm Horizontal drilling motor 2.2 kW Vertical drilling motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs pneumatic responses with kSsi control levers weight 865 kg Kdodpfjfriztex Ahvei L x W X H 280cm × 150cm × 150cm

Condition: new, Type: Z4A Number of drills/spindles Various head variants are available 4x3 Distance between first and last spindle 2300 mm Adjustable drilling speed Height of the working table 840 mm Kodpfohmbktjx Ahvjdi Table dimensions 600x2350 mm Number of clamps 8 Motor power 6 kW(4x1,5) 400 V Motor r.p.m. 2840 r.p.m Working air pressure 6-8 bar Weight 425 kg Transporting dimensions 2450x960x1550 mm

Condition: new, Type: BM21S Number of spindles 21 Adjustable drilling angle Working width 700 mm Table dimensions 1000×900 mm Additional support fence 3000 mm Number of clamps 2 Motor power 1,5 kW 380 V 50 Hz Working air pressure 8 bar Drilling step 32 mm Weight 150 kg Ksdpjfbubuefx Ahvedi Transporting dimensions 1200x1000x1300 mm

Condition: not inspected (used), Year of construction: 1976, machine/vehicle number: 1299, Brand: Weeke Model: PE 75 Year of manufacture: 1976 Kdedpfou Nwzcox Ahvoi Motor: 7.5 kW, 50 Hz, 380V, 3-phase Stock number: 10316

Condition: like new (used), Year of construction: 2018, functionality: fully functional, SPECIFICATION • Diverse solutions for woodworking: The "F" series throughfeed CNC machine offers unique solutions for modern woodworking • Zero setup time: The toolhead also functions as a tool magazine, reducing changeover times • All drilling operations performed in a single cycle • Load capacity up to 70 kg, enabling processing of larger/thicker elements such as kitchen countertops • Software control via machine control panel or remote controller • Machine manufactured in compliance with CE standards Working dimensions: X-axis: min. 240 mm, max. unlimited Y-axis: min. 80 mm, max. 1200 mm* Z-axis: min. 10 mm, max. 40 mm TECHNICAL DATA • 12 vertical drilling spindles • 4 + 4 horizontal drilling spindles (front/rear, TH1–TH4) • Independent milling unit with ER25 collet, max Ø 16 mm, 2.2 kW, 18,000 rpm • Front/rear panel edge sensors for precise sizing • "Unica" version system reduces table gap from 240 mm to 30 mm for milling, allowing for the removal of small parts • Industrial PC, 160 GB drive, 2 GB RAM • 14" color screen with CD drive, keyboard, and mouse • USB, Ethernet, and serial ports • Operating system: Windows 7 Professional • CNC automation software: SW-FW ALBATROS • CAD software: TPA • Machine dimensions: approx. 2150 × 1330 × 1560 mm • Weight: approx. 1150 kg • Operating pressure: 6 bar Kdsdpfx Ahsw D Dt Ajvsi • Feed speed: 25 m/min with material, 40 m/min without material • Power supply: 400 V, 50 Hz, 3-phase (TPA) • Tools not included in the price

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, SPECIFICATION “User-friendly” software interface Compliant with all Industry 4.0 requirements. Features an intuitive, icon-based interface, step-by-step data input, and a simulation program. Quick program selection and part execution, task lists, and a wide range of macros. Parametric programming and PC “Office Creator” license included. Optional direct import of popular 3D CAD file formats: *.stp, *.iges, *.obj, .skp and 2D formats: *.dxf, .dwg. Direct import of complete cabinet projects is also possible using simple decoding software (optional). Free software updates ensure maximum performance at all times! Multifunctionality Maximum working width: 1000 mm (with any spindle, across the entire panel surface). Maximum panel weight: 70 kg, suitable for heavy kitchen countertops and custom workpieces. Working cycle: through-feed or return-to-operator mode. Quick set-up All working operations in one cycle. The machine’s horizontal design makes loading workpieces easier for the operator. Fast program execution using a barcode scanner. Highest precisions Large and robust worktables ensure maximum stability of the workpiece, while the laser panel length sensor guarantees the highest drilling accuracy. Quality Sturdy construction, made of electrolytically welded steel, built to withstand heavy-duty use and demanding tasks. Well-dimensioned pneumatic clamp, capable of handling panels up to 70 kg, combined with double hold-down clamps. High-precision mechanics, 1 kW brushless motors, and roller guides. TECHNICAL DATA • Load capacity up to 70 kg, allowing processing of large and heavy panels, such as kitchen countertops • 11 vertical spindles: 6 horizontal spindles (front/rear, left/right), and grooving saw • Electrospindle 3.3 kW, 3000–24,000 rpm, right/left rotation • ER25 DIN 6499 collet, max Ø 35 mm • Tool size: Ø 8–16 mm, max width 98 mm • Laser referencing controlled by software for automatic length error correction • Automatic air blowers for effective cleaning of the drilling head unit • Air cushion tables at front and rear (940 × 550 mm) • Automatic lubrication on Y and Z axes • Working dimensions: o X: min. 300 mm o Y: 75–1000 mm o Z: 8–60 mm • Industrial PC: 160 GB drive, 2 GB RAM, 17” color screen with keyboard and mouse • Weight: approx. 1450 kg • Axis feed speed: o X – 42 m/min o Y – 42 m/min o Z – 10 m/min Kdjdpfx Aewn Hmaohvei • Installed power: 6.5 kW

Year of construction: 1992, condition: excellent (used), 23 spindles working width 720 mm vertical drilling depth 45 mm Ksdpfx Ajk Up Itjhvedi horizontal drilling depth 120 mm

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 080005, • Turning diameter over slide: 1920 mm • Axis height: 1300 mm Kedpewab Rdofx Ahvodi • Center distance: 2000 to 30000 mm • Maximum workpiece weight: 10–40 tons • Bed width: 2119 mm • Spindle speed: 1–500 rpm • Gear ratios: 4 • Spindle end: A2-15 • Spindle motor: 30/37 kW (optionally up to 60/75 kW) • Spindle bore: 230 mm (can be extended up to 610 mm) • Turret type: servo, 4 or 10 positions • Tool cross-section: 50/40 mm • X-axis travel: 1200 mm • Z-axis travel: 2000 to 30000 mm • X-axis ball screw: 63 mm x P10 • Ball screw in Z axis: 63 mm x P10 (over 5 m: 80 mm x P10) • Tailstock quill diameter: 235 mm (possible up to 360 mm) • Tailstock quill extension: 250 mm (possible up to 300 mm) • Tailstock quill taper: MT #7 • Rapid traverse: 7 m/min

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 12-9, number of spindles: 6, spindle bore: 67 mm, year of last overhaul: 2024, Fully overhauled on 2024, DNT, perfect quality, perfect accuracy Kedpfstw R Huox Ahvjdi

Condition: reconditioned (used), functionality: fully functional, GILDEMEISTER GS20 LATHE VARIANT 25 MM Ksdew Sxptjpfx Ahvjdi ELECTRICALLY AND MECHANICALLY REFURBISHED -REFURBISHED PNEUMATIC SECONDARY CHUCK -NEW AIR TREATMENT UNIT AND SOLENOID VALVES -RADIAL AND AXIAL SLIDES IN POS. 1-2-4-5 -WORKPIECE PICK-UP AT POS. 6 MECHANICAL OVERHAUL: 1. TURNTABLE OVERHAUL 2. SLIDE OVERHAUL 3. FRONT AND LEVER OVERHAUL 4. SPINDLE OVERHAUL 5. COLLET OPENING/CLOSING SYSTEM OVERHAUL 6. THREAD CUTTING UNIT OVERHAUL ELECTRICAL OVERHAUL: 1. NEW SIEMENS S71200 PLC AND SIEMENS KTP700 PANEL 2. CAM ENCODERS 3. RELAY REPLACEMENT

Condition: used, functionality: fully functional, MACHINE IN VERY GOOD CONDITION. SOLD WITH: 1 PICK-UP, 1 CHIP CONVEYOR, AND A WIDE RANGE OF GRIPPERS. MANUAL INCLUDED. FOR SALE DUE TO RETIREMENT OF MANAGING PERSONNEL. Kodown D R Aepfx Ahvodi

Year of construction: 1983, condition: used, machine/vehicle number: 7180793, Manufacturer: SAS-Zadar Model: SS Year of manufacture: 1983 Weight: approx. 4,000 kg Machine no.: 7180793 General / Technical Data: Special-purpose drilling machine for drilling holes in the lateral surface of cylindrical workpieces Drilling units: 8 units Kedpewylwzjfx Ahvsdi Feed system for drilling units: hydraulic feed via quill Drilling heads: interchangeable multi-spindle heads Workpiece diameter: approx. Ø30 to Ø40 mm Workpiece length: approx. 80 to 100 mm Workpiece clamping: hydraulic Cutting speed: hydraulically variable, stepless adjustment Machine dimensions (W x D x H): approx. 2,600 mm x 2,600 mm x 1,750 mm (excluding working area) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine designed for mass production • Equipped with a sturdy machine table with chip disposal through the underside of the table center • Drilling heads are interchangeable • Machine does not have an indexing table Remarks: The machine is exclusively designed for high-volume production. The machine is in its original paint and available for inspection at our warehouse.

Condition: new, Year of construction: 2024, This is a CNC router that has 4 spindles operating simultaneously and can change automatically! That increases the effectiveness of the production, making it 4 times faster. That CNC milling machine is perfect for big production of facades, doors, windows, casing moldings, etc. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 S4 machine characteristics: Working area: 1300x2500 mm Spindle: 6 kW Machine size: 2000 x 3040 x 1780 mm Weight: 1000 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Kjdpfer D Ntfox Ahvjdi On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price Kodpfecuwptjx Ahvedi • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2024, functionality: fully functional, FIVE STAR THM-460 Kodpsvi I Nmsfx Ahvjdi Horizontal dual-head milling machine with indexing axis Ideal machine for milling and chamfering P-plates for toolmaking from 4 sides in one clamping. Basic technical equipment: Control system - FANUC 0i-MF - User-friendly touch screen, 10.4" color display - Dialog-supported data input Machining capacities - Workpiece length min./max.: 20 - 460 mm - Workpiece width min./max.: 20 - 460 mm - Workpiece height min./max.: 12 - 150 mm (opt. 180 mm) - Workpiece corner chamfer Cmax.: 10 mm Travel paths - X-axis (machine table): 620 mm - Y/Z-axis (infeed axis/headstock): 330 mm / 330 mm Drive power of the axes - X-axis motor: 2.5 kW - Y/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (infeed axis): 10 m/min - Rapid traverse Z (headstock): 10 m/min - Manual feed: 0 - 1,500 mm/min - Automatic feed: 0 - 5,000 mm/min Main spindles - Two horizontally opposed milling spindles, designed for heavy-duty cutting - Drive type: Belt drive - Speed range: 100 to 1,000 min-1 each - Drive power: 11 kW each - Spindle interface: 2" / Ø50.8 mm each - Oil-cooled with separate spindle oil cooler (optional) Tools (standard) - Cutter head: Ø160 mm (opt. Ø200 mm) Note: Tools not included in the standard scope of delivery! Rotary axis (B-axis) - Indexing: (standard 5° pitch) - Indexing angle: 0°, 45°, 90°, 135° and 180° (for 2-sided machining) - Table size: Ø320 mm - Max. Max. load: 320 kg Workpiece alignment - 90° stop for easy positioning of the workpieces by the operator - Automatic measuring unit for detecting the workpiece position Guides - X-axis: Linear roller guide - Y-axis: Flat guide, TURCITE-B coated - Z-axis: Flat guide, TURCITE-B coated - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Miscellaneous - Central lubrication oil / air - Switch cabinet with heat exchanger - Machine sheet metal partial cladding - Support work table - Hand tool box - LED work light - 3-color warning light - CE declaration of conformity according to European directives Machine dimensions and weight - Machine size: 2,800 x 3,410 x 2,200 mm - Machine weight: approx. 7,500 kg Spindles - Power-Up spindle motor 15kW - Spindle interface 1-7/8" each, suitable for face cutter head Ø200 mm arbor diameter: Ø47.625 mm tools - Face cutter head Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angle: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. Load capacity: 320 kg Compressed air, coolant and chip management - Chip compressed air nozzle, 1 piece each, external to the spindles, standard option (metal compressed air articulated tube) - Coolant system with separate cooling lubricant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters Filter capacity: 80 l/min. - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Kedpfx Ahoyi A Tdovjdi Storage location: Nattheim

Condition: ready for operation (used), ROTOX copy milling machine, single-spindle Kjdjyv D Epspfx Ahvjdi

Condition: excellent (used), CATALOG NUMBER 7762 TECHNICAL DATA THICKNESSER: - shaft width: 320 mm - 3-knife planer shaft Kdedjxhdtnepfx Ahvei - max thickness of the processed element: 180 mm - thicknesser shaft guard - from above: – anti-kickback fingers – feed shaft, toothed – planer shaft – outfeed shaft, smooth, feed CIRCULAR SAW: - max blade diameter: 300 mm - max cutting height: 80 mm - blade bore diameter: 30 mm - adjustable blade up/down - cutting width with fence: 270 mm - table dimensions: 750x460 mm - fence SPINDLE MOULDER: - spindle diameter: 30 mm - adjustable spindle up/down - spindle height: 100 mm - fence - extraction port diameter: 100 mm - dimensions (LxWxH): 1700x2400x1100 mm - weight: 340 kg ADVANTAGES – Bulgarian production – Very good condition – Multi-function, used Net price: 6,900 PLN Net price: 1,640 EUR at exchange rate 4.2 EUR (Prices may vary with larger fluctuations)

Condition: used, TORNOS MULTIDECO 20/6b is a CNC Multi-spindle turning lathe engineered for high-precision machining with excellent accuracy and reliability. Key capacities: 17 axes total, 6 cross slides, 5 plain turning slides, longitudinal carriage way 160 mm, 6 spindles + 1 back spindle, round bar capacity Ø 5–20 mm, max workpiece length 100 mm, production rate 45 pcs/min. Technical specs: stepless spindle speeds up to 5000 rpm, spindle power 15 kW, total installed power 43 kVA, supply 3x 400 V 50 Hz, machine weight ≈8500 kg, dimensions L3500×W1600×H1950 mm. Equipment: ROBOBAR bar feeder type MSF 522/6, coolant system, chip conveyor, pick-up spindle, spindle stop device, lamp and status light. Delivers tight tolerances; suitable for automotive, watchmaking, toolmaking, aerospace and medical industries. Kjdpfxeytuxms Ahvjdi

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Kdodpfew Rrvwex Ahvei Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm