Used Multi Head Drilling Machine for sale (70,009)

Condition: used, Multihead cutting machine TRA2000/7/7, made by MAIR Including: 1) Loading table 2) Cutting machine with 7 cutting heads 3) Operator control panel 4) Unloading bin Optional to be build new upon requirement : 5) Double output craddle Dedpfjymaypsx Aahsuw 6) New electrical control panel with frequency converters for cutting motors 7) Sound and safety protection cover Max. tube length: 7.500 mm Max. loading capacity: 2.000 kg Round tubes (outer ø): 12 – 50 mm Square tubes (hxw): 12×12 – 40×40 mm Rectangular tubes (hxw): 12×16 – 50×30 mm Max. thickness: 2,5 mm Length of tubes to be cut: 330 – 7.400 mm Number of cutting heads: 7

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Dsdeymax Ejpfx Aahsuw 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: Dusdpfx Aoymaw Usahjw - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 755 mm, travel distance W-axis: 500 mm, number of slots in tool magazine: 54, TECHNICAL DETAILS Type: CNC EDM drilling machine Travel in X-axis: 600 mm Travel in Y-axis: 500 mm Travel in Z-axis: 755 mm Travel in W-axis: 500 mm W-axis type: Servomotor Electrode length: 800 mm Drilling diameter: from 0.10 mm MACHINE DETAILS Width: 1,975 mm Depth: 1,445 mm Height: 2,280 mm Height: max. 2,785 mm EQUIPMENT Electric changer with 18 stations Electric changer with 36 stations Automatic electrode and guide changer Breakthrough detection Duodozhnigjpfx Aahjw CAD import with intuitive touch operation Detection of holes by color code Automatic wear compensation Blind hole machining with depth control 3-stage discharge control Thread erosion for hardened materials M3 - M16 Generator power booster for large diameters Indexing axes, 1- and 2-axis available Large water tank with 175 l and filter system Drilling depth measurement Automatic electrode control

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Duodpfewuz Ekjx Aahow Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: reconditioned (used), functionality: fully functional, Maximum cutting length: 6000 mm Duedpozkt Tvsfx Aahjw Blade diameter: 500 mm Pneumatic tilting of the cutting heads Radial blade feed

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, workpiece height (max.): 30 mm, TECHNICAL DETAILS Duedpfx Ajzkt A Rsahjw Axis: 920 mm X-axis: 3,000 mm A-axis: 360° Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min Minimum dimensions (plate): X: 300 mm Y: 120 mm Z: 12 mm Maximum/minimum hole diameter: 3 mm - 35 mm Maximum cutting depth with saw blade: 10 mm MACHINE DETAILS Motor power: 0.75 HP Voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade in the X direction

Condition: used, Year of construction: 1987, total width: 800 mm, total length: 1,200 mm, total height: 2,600 mm, Colour: Green Empty weight: 700 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 14441 - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 2.2 - Table type: Fixed table - Table length [mm]: 500 - Table width [mm]: 500 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 32 - Reach [mm]: 320 - Tool holder: MK4 - Main spindle power [kW]: 1.5 - Min. spindle speed [rpm]: 85 - Max. spindle speed [rpm]: 1500 - Options: Drill unit feed - Transport dimensions: 1200mm x 800mm x 2600mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Duodpfxozkq Aue Aahow

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Dodpfxszdki Uj Aahouw Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Energy Saving Mode

Condition: used, y-axis 1.000 mm table dimensions 1.000 x 600 mm bore depth 150 mm bore diameter 32 mm spindle tunring speed 30 - 2.650 U/min Dedsy A Tc Dopfx Aahsuw output 6 kw In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1990, taper MK 3 Dusdpfxozkbqvj Aahew serial number 4131 throat 1000 mm documentation ja clamping hydraulisch kW weight of the machine ca. 2,6 t

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Dedpoh Ek H Sjfx Aahouw Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: new, Automatic mortising machine with 3 heads Worktable dimensions 3000 x 300mm Cast iron construction to give maximum rigidity 3 x vertical hydraulic work piece clamps Dujdsn Nv Txspfx Aahjw 3 x horizontal hydraulic work piece clamps Speed movement in adjustable through hydraulics Automatic operation Mortising heads x 3. Manually positioned in X axis with mechanical locks Mechanical siko readouts for height position - Z axis Double eccentric operation of the mortising heads (patented design) Motor HP3 RPM 2800mm Max distance between 2 x outside mortising heads 2800mm Min distance between 2 x outside heads 180mm - ctre to ctre of mortise. Dust extraction outlets 100mm Hydraulic pump motor 10hp

Condition: used, Year of construction: 2011, total width: 1,500 mm, total length: 3,000 mm, total height: 1,750 mm, Colour: White Empty weight: 450 kg - Year: 2011 - Documentation available: No - CE certificate present: No - Serial number: 11060282 - Main motor power [kW]: 1.3 Duodpfxszizqgj Aahow - Table length [mm]: 2000 - Table width [mm]: 520 - Max. drilling stroke [mm]: 60 - Number of spindles [pcs]: 27 - Spindle speed: Manual - Min. spindle speed [rpm]: 2820 - Max. spindle speed [rpm]: 2820 - Distance between spindles [mm]: 30 - Workpiece clamps [pcs]: 10 - Workpiece support/Guide: Traverses - Drills included: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3000mm x 1500mm x 1750mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, number of spindles: 35 pneumatic head inclination Dodpfx Aaew U Aiijhsuw

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements Dedpfx Aaswd Rlfshouw L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment Special drilling machine for stair construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily achieved thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with practical handle switch Duedpjyfta Tofx Aahow Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowelling on two levels without readjustment The desired drilling heights can be set for each drilling level with a handwheel and digital counter; switching is then done pneumatically from the front Crossfeed approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been repaired, very good condition, see original photos A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: new, bore capacity in steel St 60 32 mm bore capacity in cast iron GG 20 38 mm Drilling capacity in St 60 40 mm threading in St 60 M 24 threading in GG 20 M 30 Short spindle MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 515 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117 / 701 mm feed von Hand Dusdpfx Aajyvvptehsw spindle turning speed - stepless 160 - 2250 U/min total power requirement 1,45/1,9 kW weight of the machine ca. 260 kg

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 220 mm tool adaptor MK 4 Duodpfxszip I Hs Aahew machine weight ab. 400 kg

Condition: new, 40 mm Dusdpfx Ajyvvq Doahsw M 24 M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm T-slots: 20 mm T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Dujdjzinz Sopfx Aahow Weight: 150 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm - Fixed tilting table 600 x 210 mm - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table Dujdezinzxopfx Aahew - Original chip tray for mounting on the machine base - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages Dodpfx Aajziny Iehouw - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 179-000-000000-000, functionality: unexamined, Machine data Duedpfx Aajzim R Eohjw Designation: IMI Installation dimensions: approx. 2000 × 1200 × 2300 mm Weight: approx. 1500 kg

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Dusdpfxeyqxxre Aahow Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22