Used Multi Head Drilling Machine for sale (94,885)

Year of construction: 2014, condition: excellent (used), Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Bedofmdcqjpfx Ab Tjdk Location: comes to warehouse 54634 Bitburg - immediately available -

Year of construction: 2004, condition: excellent (used), Technical specifications: System for welding longitudinal seams on steel beams with T- or H-profile, crane runway girders or bridge sections made of sheet metal - Max. boom arm height: 6,600 mm - Total length of the welding system: 6,700 mm - Horizontal reach of the boom arm: 5,000 mm - System runs on rails - Rail gauge: 2,065 mm - Submerged arc welding process (SAW) - SAW welding units - Power source: MESSER LG800N - Number of power sources: 2 units Bedpfsxz Hu Isx Ab Tedk - Output: 400 amperes - Tack welding device The system is assembled and available for inspection under power in production. The seller assumes no liability for typographical or data transmission errors. The machine’s condition in terms of appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 22 mm throat 180 mm bore stroke 120 mm total power requirement 0,75 kW weight of the machine ca. 70 kg Features: V-belt drive via aluminum pulleys Safety switch according to IP 54 Drilling depth stop Drilling table ± 45° tiltable Bdedjxyln Dopfx Ab Tok Height-adjustable drilling table via rack and pinion with diagonal T-slots and surrounding cooling water channel 400 V version

Condition: used, Year of construction: 1995, bore capacity in steel (diameter) 40 mm throat 230 mm bore stroke 130 mm taper MK 4 MK table-size 400 x 315 mm turning speeds 105 - 1257 U/min total power requirement 2,55 KW weight of the machine ca. 0,35 t dimensions 0,8 x 0,6 x 1,95 m Bsdpfx Absxz Hg Rj Tjdk

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle speed (max.): 3,000 rpm, total width: 1,000 mm, table length: 1,120 mm, travel distance W-axis: 710 mm, The machine is in very good technical condition, connected and available for testing. Control system: Heidenhain iTNC 530. Accessories: tools, clamping angles, workpiece probe. Bjdjxz E N Djpfx Ab Tedk

Condition: used, Year of construction: 2006, functionality: fully functional, Refurbished, repainted glass drilling machine. Tested together with Bentele manufacturer. Currently disassembled and stored in the warehouse. Bdedpexz Ez Hjfx Ab Tok

Condition: as good as new (ex-display), Year of construction: 2025, OPTIdrill D 26PRO - Column drilling machine Table and column drilling machine with V-belt drive User-friendly safety switch in accordance with IP 54 with undervoltage release and separate emergency stop switch Bjdpfxodqzbne Ab Tedk 400 volt models with right/left rotation Drilling depth stop Precisely machined drilling table with diagonal T-slots Height adjustment of the drilling table via rack Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast spindle lever made from one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electronics in 24 V direct current Guaranteed concentricity

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 910612, Equipment: CE marking, type plate available, Stationary machine for drilling holes in polyurethane foam used in mattress manufacturing. The machine features automatic feeding of foam blocks. Hole diameters range from 10 mm to 40 mm. Drilling depth from 200 to 250 mm. Spindle speed from 1,500 to 3,000 rpm. Automatic feed with adjustable speed. Throughput: 300 to 500 mattresses per day in continuous operation. The machine is complete and in good working condition. Bdodpfx Absxz Dzxo Tsk

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm Bdodpexyf E Nofx Ab Tok • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 25 mm throat 270 mm bore stroke 130 mm taper MK 3 MK table-size 500 x 350 mm turning speeds 100 - 2750 U/min connected load frequency 400 V total power requirement 1,1 KW Bdedpfx Absxz Hgwe Tok weight of the machine ca. 0,22 t dimensions 0,8 x 0,6 x 1,8 m

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm Bedpfx Abewid Uwe Todk table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: reconditioned (used), Year of construction: 1992, With VE 320 electronic Year of manufacture: 1992 Drilling capacity in steel: 32 mm Thread cutting device Mechanical feed infinitely variable via potentiometer Clamping surface table: 500 mm x 360 mm Drilling depth adjustment with digital display Bdjdpfoxc Iw Hsx Ab Tjk Protective device Drilling depth: 150 mm Spindle taper: MK 3 Spindle speeds 140 rpm – 1400 rpm stepless with digital display Drill table illumination

Condition: good (used), Year of construction: 1996, Grass ECO Press pot hole drilling machine Year of manufacture 1995 Right and left stops Weight approx. 45 kg 380 V - 50 Hz - 2.5 A Pneumatic connection - max. 6 bar Bedpfxovzbuys Ab Todk CE marked Location: from warehouse 54634 Bitburg - free loading Immediately available Handed over in the current condition, as inspected in Bitburg, Without guarantee, without warranty

Condition: new, The SSB F 60 Super VT PRO is a cutting-edge Column Drilling Machine that exemplifies KNUTH's commitment to delivering robust and precise machining solutions. Designed for versatile operations, this machine excels in drilling, countersinking, reaming, and tapping, making it a perfect fit for workshops tasked with single and small series production, especially in steel construction and maintenance of large systems. The machine features an electronically controlled servo quill feed complete with a large touchscreen control panel for intuitive operation and effortless selection of machining parameters. Its heavy-duty construction, characterized by a durable cast iron build, ensures high drilling and thread cutting capacity, while the motorized table height adjustment and ± 45° swivel range enhance flexibility during use. With standard features including automatic thread cutting cycles, an efficient coolant system, and a comprehensive accessory set, the SSB F 60 Super VT PRO stands out as an invaluable tool in any professional setting. You can order online today to elevate your machining capabilities with this precision-engineered drilling machine from KNUTH. Bsdpsq Rdqnsfx Ab Tjdk

Condition: new, Special offer price €7,700 instead of €9,500, excl. VAT. - Drill head is 360° swiveling around the column and height adjustable - Gearbox built with traditional, proven technology for maximum torque – helical gears made of fiber-reinforced steel ensure high efficiency, low noise levels, long service life, and virtually maintenance-free operation - Spindle made of steel – adjustable tapered roller bearings (ball bearing design) guarantee optimal tool concentricity - Adjustable spindle return spring – return force can be adapted to the weight of the tool - Automatic feed (Model M) – when the preset drilling depth is reached, the spindle returns to its starting position (the feed gearbox features automatic overload protection and can also be manually disengaged) - Electromagnetic feed and automatic tapping device (Model ME) - High-quality cast iron rectangular table (500 x 400 mm) with T-slots and oil channel – height adjustable and 360° swiveling around the column - Drill column made of steel – guarantees long-term machine stability as well as high precision and angular accuracy between drill bit and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, undervoltage release, and emergency stop switch Optional equipment: - LED work light - Tool set for MT4 - Machine vice, 150 mm jaw width - 2 x T-slot nuts - Drill chuck 1 – 13 mm B16 Metabo, arbor MT4 - Reducing sleeve MT4 / MT3 - Reducing sleeve MT4 / MT2 - Reducing sleeve MT4 / MT1 - Automatic tapping device - Complete coolant system - Swivel device for table 400 x 500 mm - Foot-operated spindle motor on/off switch - Spindle nose with thread for tool holder - Lower spindle speeds 60 – 980 rpm - Higher spindle speeds 180 – 3,000 rpm - Handwheel cross handle with 3 levers - Cross table FB102, 584 x 242 mm, longitudinal travel 415 mm, cross travel 155 mm - Milling chuck ER, MT4, 5, collet sizes 6, 8, 10, 12, and 20 mm - Drill chuck 0 – 13 mm with arbor MT4 - Drill chuck 3 – 16 mm with arbor MT4 - Special paint finish Technical specifications: - Drilling capacity: 40 mm - Quill stroke: 190 mm - Tapping capacity (steel / cast iron): M24 / M28 - Spindle taper: MT4 Bdjdpfx Asw A Ac Heb Tok - Spindle speed: 90 – 1,500 rpm - Gear steps: 8 - Max. distance spindle/table: 830 mm - Max. distance spindle/base plate: 1,210 mm - Throat depth: 330 mm - Table size: 500 x 400 mm - Column diameter: 140 mm - Motor power: 2.6 kW - Voltage: 400 V - Dimensions (W x H x D): 500 x 2,120 x 750 mm - Weight: 310 kg

Condition: used, Year of construction: 2019, bore capacity in steel (diameter) 50 mm throat 360 mm bore stroke 240 mm taper MK 5 MK table-size 580 x 460 mm feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U turning speeds 52 - 1400 U/min total power requirement 3,0 KW weight of the machine ca. 0,75 t dimensions 0,8 x 1,2 x 2,2 m Bsdpfxsxz Hgks Ab Tjdk Pillar drilling machine: - Feed rate 0.1 to 0.4 mm/rev - Tapping attachment - Digital speed display - Coolant pump - Motorized table height adjustment - Rotating and swiveling table - Machine light

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1250 workpiece height max.: - mm distance column till spindle centre: 1250 mm drill head horizontal traverse: 980 mm vertical adjustment of arm: 800 mm distance table - lower edge spindle: 2,05 x 9,2 x 2,85 mm spindle taper MT: MK4 bore spindle stroke: 280 mm range of revolutions per minute - continous: 28-1.195 3 Steps U/min swivel range of the arm: 90 Grad feed: 0,1/0,2/0,3/0,4/0,8/1,2 6 Steps mm/U column diameter: 300 mm base plate surface area: 1.370 x 750 mm Bdodpfxewid Aue Ab Tsk weight of the machine ca.: - t dimension machine xH: 2,05 x 9,2 x 2,85 m Cooling water system with feed Table with clamping surface 1,370mm x 750mm incl. drilling cube *

Year of construction: 2012, condition: used, Used machine Year of manufacture: 2012 Bdjdpexya Rgofx Ab Tek Equipment and technical data: Axes: X-axis: - Max. workpiece length: unlimited - Min. workpiece length: 250 mm - Traverse speed: 0-25 m/min Y-axis: - Max. workpiece width: 1,000 mm - Min. workpiece width: 80 mm - Traverse speed: 0-50 m/min Z-axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 10 mm - Traverse speed: 0-20 m/min Minimum and maximum workpiece sizes depend on the weight and on the length-to-width ratio! Units: 16-fold drilling head: - Vertical spindles in X direction: 5 pcs. - Vertical spindles in Y direction: 5 pcs. - Horizontal double drilling spindle in X direction: 2+2 pcs. - Horizontal double drilling spindle in Y direction: 1+1 pcs. - Spindle spacing: 32 mm - Spindle speed: 4,000 rpm - Motor: 1.7 kW Grooving saw: - In X direction - Speed: 4,000 rpm - Max. saw blade diameter: 125 mm - Motor: 1.7 kW (Grooving saw is integrated in drilling head) Milling unit: - Speed: 1,000 to 18,000 rpm - Motor (frequency-controlled): 3.3 kW - Collet chuck: max. 25 mm - Includes integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Extraction: - Volume: 2,000 m³/h - Air velocity: 25 - 30 m/sec - Extraction nozzle: 1 x 150 mm Software: MASTERWORK-MACHINE VERSION Required air pressure: 8 bar Air consumption: max. 750 l/min Air tables in the working area Roller table at infeed and outfeed Additional foldable roller table at infeed Panel measuring sensor Ball screw spindle and linear guides Rack and pinion drive Central lubrication DXF file import Dimensions: 1,990 x 2,410 x 1,510 mm Weight: 1,300 kg Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 1993, Grass fitting and hole row drilling machine used, good condition Type BBM-R Year of manufacture 1993 Mach. No. 931137 Vertical drilling head Bdedpfxovzb Dne Ab Tsk 1st fitting 2nd fitting 3rd fitting Turret head for selecting the drill head Hole row drilling head with pins Number of spindles in a row 15 pieces with press-in die 1 piece Stop rulers Weight: 95 kg Storage location 54634 Bitburg, free loading, unpacked Handed over in the current condition as inspected

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Bdsdpovvi I Refx Ab Tjk

Condition: new, Special price €2,800 instead of €3,340 excl. VAT - Precise drilling depth adjustment - Suitable for drilling and tapping (optional) - The drilling table is height-adjustable and can be rotated around the column - Made in Sweden Specifications - Drilling capacity: 25 / 28 mm - Spindle stroke: 130 mm - Tapping capacity (steel / cast iron): M 16 / M 20 Bdodpou Tq Stsfx Ab Tok - Spindle mount: MT3 - Spindle speed: 129 - 1498 rpm - Gear ratios: 4 - Max. spindle/table distance: 730 mm - Throat depth: 255 mm - Drilling table size: 500 x 400 mm - Column diameter: 100 mm - Motor power: 0.65 kW - Voltage: 400 V - Dimensions W x H x D: 500 x 1720 x 500 mm - Weight: 185 kg

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Bdodpfx Ajg U Uv Ujb Tsk Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: new, Special offer €5,250 instead of €5,850 excl. VAT Solberga SE2035 – Geared Pillar Drill - Drill head can be swivelled 360° around the column and height-adjusted - Gearbox built with traditional and proven technology for maximum torque – helical-toothed gears made from fibre-reinforced steel offer high efficiency, low noise levels, a long service life and an almost maintenance-free gearbox Bdedpsuzhx Aofx Ab Tsk - Spindle made of steel – optimised tool concentricity thanks to adjustable tapered roller bearings - Adjustable return spring for the spindle – return force can be adapted to the weight of the tool - Automatic feed (Model M) – when the preset drilling depth is reached, the spindle returns to its starting position (the feed gearbox is equipped with automatic overload protection and can also be disengaged manually) - Electromagnetic feed and automatic tapping function (Model ME) - High-quality cast iron rectangular table (500 x 400 mm) with T-slots and oil channel – height-adjustable and 360° swivelling around the column - Drill column made of steel – guarantees permanent machine stability as well as maximum precision and squareness between drill bit and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, undervoltage release and emergency stop switch Optional equipment - LED work light - Tool kit for MK4 - Machine vice 150 mm jaw width - 2 x T-slot nuts - Drill chuck 1 – 13 mm B16 Metabo, arbor MK4 - Reducing sleeve MK4 / MK3 - Reducing sleeve MK4 / MK2 - Reducing sleeve MK4 / MK1 - Automatic tapping device - Complete coolant system - Foot-operated tapping device - Foot-operated on/off switch for spindle motor - Spindle nose with thread for tool mounting - Cross table FB102 584x242 mm, longitudinal movement 415 mm, cross movement 155 mm - Drill chuck 0 – 13 mm with arbor MK4 - Drill chuck 3 – 16 mm with arbor MK4 - Special paint finish Technical specifications - Drilling capacity: 35 mm - Quill stroke: 150 mm - Tapping capacity (Steel / Cast iron): M 18 / M 22 - Spindle taper: MK4 - Spindle speed: 85 – 3160 rpm - Number of speeds: 8 - Max. distance spindle/table: 820 mm - Max. distance spindle/base plate: 1150 mm - Throat: 320 mm - Table size: 500 x 400 mm - Column diameter: 127 mm - Motor power: 1.6 kW - Voltage: 400 V - Dimensions (W x H x D): 500 x 1785 x 700 mm - Weight: 290 kg

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: Bdjdsxdttiepfx Ab Tjk - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: good (used), Year of construction: 2000, Hettich Blue Max 8 hardware drilling machine Bdodpsr Igt Djfx Ab Tsk Make Hettich Type Blue Max 8 FS Number of spindles in row 5 pieces Press-in die Workpiece clamping cylinder 2 x pneumatic Pneumatic drilling feed Stop rulers Pendulum stops Foot control Space requirement approx. 1200 mm x 700 mm x 1500 mm Weight approx. 150 kg Some drill bits included The stops cannot be seen in the photos, but are included Location: ex stock 54634 Bitburg - immediately available -