Used Multi Drilling for sale (8,752)

Condition: excellent (used), Year of construction: 1988, operating hours: 9,807 h, functionality: fully functional, machine/vehicle number: 17483, NOTTMEYER KOMET SUPER S/PN Bdjdpjx Af D Rofx Aa Dsb - very well maintained - fully functional - available immediately

Year of construction: 1995, condition: reconditioned (used), multi-spindle drilling machine Koch 25 automatic spindle drill spacing 32 mm setting in the X and Y axes and using a ruler. The machine has been overhauled. Machine type SPRINT 4kW motor. cylinder stroke 300 mm year of manufacture 1995 machine complete and ready to work Bsdokytcfjpfx Aa Dsdb Heads 25 spindeln pins size width between pins 32 mm standard

Condition: excellent (used), 7 spindles Possibility to adjust the distance between the spindles Minimum distance 5.5 cm Maximum 120 cm 3 1.1 kW motors Maximum working height 20 cm Bdodpfjttaigjx Aa Dsb Pneumatic

Condition: excellent (used), 21 spindles The distance between the spindles is 32 mm 2.5 HP motor Bodpfetrlm Uox Aa Dedb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x2300x1780 mm Weight 4000 kg Bdedjvz Hrdopfx Aa Dob Total power requirement 27,2 kw

Year of construction: 1982, condition: good (used), IESSE - multispindle boring machine model BEAVER year 1982 manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm Horizontal drilling motor 2.2 kW Vertical drilling motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs pneumatic responses with kSsi control levers Bdedpfxefrizts Aa Dsb weight 865 kg L x W X H 280cm × 150cm × 150cm

Condition: new, Type: Z4A Bodpfxohmbkts Aa Dsdb Number of drills/spindles Various head variants are available 4x3 Distance between first and last spindle 2300 mm Adjustable drilling speed Height of the working table 840 mm Table dimensions 600x2350 mm Number of clamps 8 Motor power 6 kW(4x1,5) 400 V Motor r.p.m. 2840 r.p.m Working air pressure 6-8 bar Weight 425 kg Transporting dimensions 2450x960x1550 mm

Condition: new, Type: MZ73031A Number of spindles 3 Distance between first and last spindle 50 mm Adjustable drilling speed Height of the working table 820 mm Table dimensions 735×440 mm Number of clamps 2 Motor power 1,5 kW 400 V Motor r.p.m. 2800 r.p.m Working air pressure 6-8 bar Weight 75 kg Transporting dimensions 900x700x1500 mm Bsdpfx Aod R Rt Sea Djdb

Condition: new, Type: BM21S Number of spindles 21 Adjustable drilling angle Working width 700 mm Bdedofbubuspfx Aa Deb Table dimensions 1000×900 mm Additional support fence 3000 mm Number of clamps 2 Motor power 1,5 kW 380 V 50 Hz Working air pressure 8 bar Drilling step 32 mm Weight 150 kg Transporting dimensions 1200x1000x1300 mm

Condition: used, Year of construction: 2019, functionality: fully functional, Manufacturer: Vitap Model: ALFA 27T Year: 2019 Type: drilling Bdodpfx Aajxwwl Aj Djb TECH DATA Dimensions of the work surface 1062 mm Width/ 365 mm Length Mandrel No. 27/ Weight in Kg 288 Drill run = 80 mm Panel dimensions Depth min.10/ max.70 Length min. 150 / max. 3200 mm Width min. 100 / max. 800 mm Working area Front 2000 mm Side 2500 mm Back 2000 mm Engine power and absorption Hp 2.5 / 1.85 KW Materials: solid wood, laminated and non-laminated chipboard panels, MDF.

Condition: not inspected (used), Year of construction: 1976, machine/vehicle number: 1299, Brand: Weeke Model: PE 75 Year of manufacture: 1976 Bdedpfx Aaju Nwzcs Dob Motor: 7.5 kW, 50 Hz, 380V, 3-phase Stock number: 10316

Condition: like new (used), Year of construction: 2018, functionality: fully functional, SPECIFICATION • Diverse solutions for woodworking: The "F" series throughfeed CNC machine offers unique solutions for modern woodworking • Zero setup time: The toolhead also functions as a tool magazine, reducing changeover times • All drilling operations performed in a single cycle • Load capacity up to 70 kg, enabling processing of larger/thicker elements such as kitchen countertops • Software control via machine control panel or remote controller • Machine manufactured in compliance with CE standards Working dimensions: X-axis: min. 240 mm, max. unlimited Y-axis: min. 80 mm, max. 1200 mm* Z-axis: min. 10 mm, max. 40 mm TECHNICAL DATA • 12 vertical drilling spindles • 4 + 4 horizontal drilling spindles (front/rear, TH1–TH4) • Independent milling unit with ER25 collet, max Ø 16 mm, 2.2 kW, 18,000 rpm • Front/rear panel edge sensors for precise sizing • "Unica" version system reduces table gap from 240 mm to 30 mm for milling, allowing for the removal of small parts • Industrial PC, 160 GB drive, 2 GB RAM • 14" color screen with CD drive, keyboard, and mouse • USB, Ethernet, and serial ports • Operating system: Windows 7 Professional Bdsdpfx Ajw D Dt Aoa Dsb • CNC automation software: SW-FW ALBATROS • CAD software: TPA • Machine dimensions: approx. 2150 × 1330 × 1560 mm • Weight: approx. 1150 kg • Operating pressure: 6 bar • Feed speed: 25 m/min with material, 40 m/min without material • Power supply: 400 V, 50 Hz, 3-phase (TPA) • Tools not included in the price

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, SPECIFICATION “User-friendly” software interface Compliant with all Industry 4.0 requirements. Features an intuitive, icon-based interface, step-by-step data input, and a simulation program. Quick program selection and part execution, task lists, and a wide range of macros. Parametric programming and PC “Office Creator” license included. Optional direct import of popular 3D CAD file formats: *.stp, *.iges, *.obj, .skp and 2D formats: *.dxf, .dwg. Direct import of complete cabinet projects is also possible using simple decoding software (optional). Free software updates ensure maximum performance at all times! Multifunctionality Maximum working width: 1000 mm (with any spindle, across the entire panel surface). Maximum panel weight: 70 kg, suitable for heavy kitchen countertops and custom workpieces. Working cycle: through-feed or return-to-operator mode. Quick set-up All working operations in one cycle. The machine’s horizontal design makes loading workpieces easier for the operator. Fast program execution using a barcode scanner. Highest precisions Large and robust worktables ensure maximum stability of the workpiece, while the laser panel length sensor guarantees the highest drilling accuracy. Quality Sturdy construction, made of electrolytically welded steel, built to withstand heavy-duty use and demanding tasks. Well-dimensioned pneumatic clamp, capable of handling panels up to 70 kg, combined with double hold-down clamps. High-precision mechanics, 1 kW brushless motors, and roller guides. TECHNICAL DATA • Load capacity up to 70 kg, allowing processing of large and heavy panels, such as kitchen countertops • 11 vertical spindles: 6 horizontal spindles (front/rear, left/right), and grooving saw • Electrospindle 3.3 kW, 3000–24,000 rpm, right/left rotation • ER25 DIN 6499 collet, max Ø 35 mm • Tool size: Ø 8–16 mm, max width 98 mm • Laser referencing controlled by software for automatic length error correction • Automatic air blowers for effective cleaning of the drilling head unit • Air cushion tables at front and rear (940 × 550 mm) • Automatic lubrication on Y and Z axes • Working dimensions: o X: min. 300 mm o Y: 75–1000 mm o Z: 8–60 mm • Industrial PC: 160 GB drive, 2 GB RAM, 17” color screen with keyboard and mouse • Weight: approx. 1450 kg Bdsdjwn Hmaopfx Aa Djb • Axis feed speed: o X – 42 m/min o Y – 42 m/min o Z – 10 m/min • Installed power: 6.5 kW

Year of construction: 1992, condition: excellent (used), 23 spindles Bodpfx Aaok Up Ite Djdb working width 720 mm vertical drilling depth 45 mm horizontal drilling depth 120 mm

Condition: excellent (used), Multi-spindle drilling machine SCM Type FM 29/S 29 spindles Distance 32 mm Table 1200 x 780 mm Bedpfx Ajvxtfroa Dedb Max drilling depth for vertical drilling 100 mm/ horizontal 60 mm Spindle speed 3800/min

Condition: excellent (used), Multi-spindle drilling machine BILEK Dowel fix used 29 spindles Bdedpfx Aaokx Hwwe Dob

Year of construction: 1983, condition: used, machine/vehicle number: 7180793, Manufacturer: SAS-Zadar Model: SS Year of manufacture: 1983 Weight: approx. 4,000 kg Machine no.: 7180793 General / Technical Data: Special-purpose drilling machine for drilling holes in the lateral surface of cylindrical workpieces Drilling units: 8 units Feed system for drilling units: hydraulic feed via quill Drilling heads: interchangeable multi-spindle heads Workpiece diameter: approx. Ø30 to Ø40 mm Workpiece length: approx. 80 to 100 mm Workpiece clamping: hydraulic Bdedpfx Aajwylwzo Djb Cutting speed: hydraulically variable, stepless adjustment Machine dimensions (W x D x H): approx. 2,600 mm x 2,600 mm x 1,750 mm (excluding working area) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine designed for mass production • Equipped with a sturdy machine table with chip disposal through the underside of the table center • Drilling heads are interchangeable • Machine does not have an indexing table Remarks: The machine is exclusively designed for high-volume production. The machine is in its original paint and available for inspection at our warehouse.

Condition: excellent (used), Maggi Boring System 35 Multi-spindle Drill Number of spindles 35 Spacing between spindles 32mm Distance between first and last spindle 1088mm Maximum drilling depth 85mm Spindle speed 2800r.p.m Number of pneumatic clamps 4 Machine working pressure 6-8bar Air demand per cycle 15l Number of motors 2×1.5kw Bdsdpsvx Aqdefx Aa Dob Weight 450kg CE certificate

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly) Bdjdpfxox Rqk Io Aa Dsb

Condition: new, CATALOG NUMBER: M0261 TECHNICAL DATA Number of spindles: 21 Distance between first and last drill: 640 mm Distance between spindle centers: 32 mm Max. workpiece size: 50 x 915 x 3000 mm Max. drilling depth: 65 mm Number of pneumatic clamps: 2 Working table height: 860 mm Max. clamp height above table: 70 mm Working pressure: 6-7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Spindle speed: 2800 rpm Dimensions (L/W/H): 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Bjdpfxoymm H Ae Aa Djdb Main machine features: - Single-head boring machine, drilling range 0 - 90 ° - Pneumatically adjustable head inclination angle - Cast iron fences - Spindles adapted for quick-connect couplings - Patented pneumatic workpiece clamps - Cast iron work table - Fast and precise adjustment - Accurate drilling - Made in Italy Standard equipment: - 2 aluminum rulers, 1.5 m each (right and left) with two stops - 5 quick couplings - Wooden box for secure transport of the machine ADVANTAGES - Drilling vertically, horizontally, or at an angle - Multi-spindle - Brand new machine - CE certified - Robust and professional Net price: 13,800 PLN Net price: 3,330 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (prices may vary in case of significant exchange rate fluctuations) - We ship machines to every part of the country - Possibility to trade in another machine as part payment The prices provided are net prices. Net price applies to international transactions and EU customers with a valid EU VAT number. Before placing an order for a new product, please confirm availability and current price.

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs Bedpfx Aaox Rqkho Djdb - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Bodpfx Aeyh H Dnea Dodb Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: excellent (used), Catalogue number 7945 TECHNICAL DETAILS - Number of spindles: 21 pcs - Distance between outermost spindles: 640 mm - Spindle pitch: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 890x380 mm - Height to table surface: 890 mm - Feed cylinder stroke (drilling depth adjustment): 70 mm - Drilling speed adjustable pneumatically - Drilling angle adjustable pneumatically - Main motor: 1.5 kW Bdjdpfx Aajywth Ns Djb - Side fences and stop: 1500 mm - Compressed air requirement: 6-8 bar - Dimensions (L/W/H): 1000x1540x1340 mm – weight: 282 kg ADVANTAGES – Austrian-made – 21 spindles – quick-change drill chuck system – Drilling vertically, horizontally, and at an angle – unpainted – Used drilling machine in very good condition Net price: 11,900 PLN Net price: 2,830 EUR based on an exchange rate of 4.2 EUR (Prices may change with larger exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7829 TECHNICAL DATA - number of spindles: 20 pcs - max. tool diameter: 10 mm - adjustable spindle spacing: front/back, left/right - table surface size: 530x1300 mm - height to table surface: 950 mm - table working stroke: 100 mm - table height adjustment: pneumatic and manual Bdjdpsymm Rzofx Aa Dsb - 3 pneumatic clamps - main motor: 3×2.2 kW - dimensions (L/W/H): 1700x1130x1600 mm - weight: 555 kg ADVANTAGES – Polish manufacture – adjustable spindle spacing: front/back, left/right – pneumatically lifted table – unpainted – used drill, very good condition Net price: 18,900 PLN Net price: 4,500 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Device description Table width - 850mm Drill stroke - max 70mm Number of spindles - 21 Bodpfjyxc Hqsx Aa Djdb Distance between spindles - 32mm 4 pneumatic clamps Drilling depth adjustment Vertical, horizontal and angle drilling 1.5kW main engine Pneumatically adjustable drilling speed Pneumatically adjustable drilling angle Quick-release drill attachment