Used Multi Drilling for sale (9,939)

Condition: good (used), Year of construction: 1989, power: 22 kW (29.91 HP), with electric saw blade adjustment chain width 230 mm motor 22 kW max. cutting height without pressure comb in fixed position: 130 mm max. cutting height without pressure comb with movable blade: 95 mm Guodpfx Aezv Uyusngeh with pressure comb: 15 mm less cutting height still in good condition

Condition: used, bore capacity in steel (diameter) 32 mm arm length 1230 mm Guedpozwg Rusfx Angoh table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 45 - 1370 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: excellent (used), Inline drilling machine Guedpjzdp U Nefx Angjh Manufacturer: Ixion Type: 3 R 15 3 consisting of a tapping machine BT15GL Tapping capacity up to M16 8 tapping chucks Pitch: 0.4 - 0.5 - 0.7 - 0.8 - 1 - 1.25 - 1.5 - 1.75 Drilling machine BT 15 P MK2 10 speeds, 240 - 3800 rpm and drilling machine BT 15 5 speeds, 480 - 3800 rpm Length: 980 mm Width: 660 mm Height: 1600 mm Weight: 420 kg

Condition: good (used), Year of construction: 2014, See documents. Godpfozqtg Ajx Angjuh List of individual machines with operating hours, etc. – see documents.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, TRACKED SINGLE-SHAFT MULTIBLADE SAWMILL TOS SVITAVY PWR 401 450/160, 75 kW MOTOR Note: Fitted with new guides and a new chain (the replacement cost was quite significant – 36,000 PLN) Gujdpfx Aney Nxdyogoh TECHNICAL DATA - Track width: 450 mm - Shaft width: 420 mm - Mounted blade: 400 mm - Maximum blade diameter: 450 mm - Blade bore diameter: 80 mm - Maximum cutting height with 450 mm blade: 160 mm - Table dimensions: 2230 x 860 mm Top side: - Anti-kickback pawls - Slipper shaft - Anti-kickback pawls - Smooth slip roller - Hold-down - Shaft with bushing and nut - Hold-down - 2 slip/hold-down shafts Bottom side: - Roller before the table - Guide rail - Pawls - Track chain - Central track chain lubrication - Electric rise and fall for sawshaft - Electric body lift: 0.75 kW - Infinitely variable feed speed – new 2.2 kW inverter installed - Extraction port diameter: 280 mm - Main motor: 75 kW - Overall dimensions (L/W/H): 2360 x 2000 x 1960 mm - Weight: 3250 kg ADVANTAGES - Czech manufacture - Used multiblade saw - Overhead operator’s control panel - Full technical documentation (DTR) - Very good condition - We can provide a warranty for the equipment

Condition: excellent (used), functionality: fully functional, TRV multi-blade circular saw for the production of timber and turning blanks. Number of blades: 11 Gusdpfx Anjy T H Riegsh Maximum element height: 70 mm Maximum timber length: 820 mm Main motor power: 18.5 kW

Condition: used, total width: 1,300 mm, total length: 1,750 mm, total height: 2,400 mm, Colour: Grey Empty weight: 2.000 kg - Documentation available: No - CE certificate present: No - Serial number: 955 - Drive system: Conventional - Positieklemming: Hydraulic - Arm length [mm]: 1570 - Y-axis travel [mm]: 1320 - Table length [mm]: 650 - Table width [mm]: 1300 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 0 - Min. Reach [mm]: 300 - Max. Reach [mm]: 1100 Gedpozrgc Hsfx Angsuh - Tool holder: MK4 - Min. spindle speed [rpm]: 102 - Max. spindle speed [rpm]: 2000 - Options: Drill unit feed, Tapping function, Clamping block - Transport dimensions: 1750mm x 1300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of manufacture: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Threading (steel/cast iron): M25 / M38 Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Guedpfxjznvibs Angsh Column diameter: 300 mm Tool shank: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Outrigger height adjustment: 620 mm 51026ä

Condition: good (used), functionality: fully functional, 2 Index MS 25 E machines in very good condition and fully functional – also available individually – for sale. Guodpszicxlsfx Angjh Inspection while the machines are powered on is possible.

Condition: used, Year of construction: 1997, Technical details: bore capacity in steel (diameter): 32 mm x-travel: 750 mm y-travel: 520 mm drill capacity in cast iron: 45 mm revolution per minute: 90 - 4500 U/min feed steps: 6 bore spindle stroke: 250 mm boring spindle diameter: 30 mm drill spindle - Morse Taper: MK4 vertical adjustment of the arm: 520 mm throat max.: 1000 mm throat min.: 250 mm column diameter: 400 mm swivel range of the arm: 180 ° table clamping surface LxW: 1150 x 800 mm total power requirement: 3,5 KW weight of the machine ca.: 2000 kg dimension machine approx.LxWxH: 1,7 x 1,07 x 2,61 m The KOVOSVIT VO 32 is a robust and versatile radial drilling machine designed for industrial applications. The machine is suitable for drilling, boring, countersinking, reaming, and tapping operations in steel, cast iron, and other materials. Thanks to its swiveling radial arm and large reach, even large and heavy workpieces can be machined conveniently without the need for complex repositioning. The machine features a massive cast-iron construction, a powerful main drive, and an automatic feed system. The drilling head can be moved along the radial arm, providing a large working area. Its solid design ensures high precision, reliability, and a long service life, even under continuous operation. Gjdpfx Aozgwgfsngeuh Equipment: ·Including coolant pump ·1 × boring tool block (boring cube) ·1 × machine vise *

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) Gjdpozhpg Tefx Angjuh delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1988, Dalmastroj BRB-3 Conventional quick-feed radial drilling machine Condition: Used Year of manufacture: 1988 Technical data: Drilling capacity in steel: Ø 30 mm Overhang: 430 - 1000 mm Column diameter: 200 Workpiece height: 500 mm Gsdpfxjzhualj Angeuh Drill spindle taper: MK 4 Speed range: 100 to 1120 rpm (8 speeds) Head swivel: 360° Motor power: 1.4 / 1.8 kW Connection: 400 V Machine weight: approx. 2100 kg incl. accessories Equipment: - Coolant foot with pump - Thread cutting device - Drilling depth stop - Drill chuck

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Number of spindles per row of holes: 11 Number of horizontal spindles: 5 Pot-joint drilling head: yes Drill spacing: 32 mm Clamping device: yes / pneumatic Power consumption: 2.2 kW Gjdpfx Aozhx D Uongouh Stop rulers Accessories: many drill bits (see photos) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2005, operating hours: 4,630 h, turning length: 1,585 mm, spindle motor power: 30,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,585 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 2,700 mm, overall weight: 14,500 kg, Multi-tasking lathe MAZAK - INTEGREX 400 III-S MACH-ID 9809 Make: MAZAK Type: INTEGREX 400 III-S Control: MAZATROL 640 MT PRO Year: 2005 Only 4630 Cutting hours Automatic door 40 CAPTCO C6-Tool magazin Robot interface 5 Axis simulteneous package Sub spindel with C-Axis and 0,0001 Degree Internal Grundfos 15 Bar coolant Chip conveyor Optional tooling package with 40 holders Gjdpfx Ajz Ata Hongsuh Max. turning Ø: 850mm X-Axis: 630mm Y-Axis: -115 to + 115mm Z-Axis: 1585mm B Axis: -30 to +195° Spindle bore: 102mm Speedrange: 3300Rpm Spindle power: 30kW Subspindle speeds:3300Rpm Subspindle bore: 102mm Subspindle power: 26kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm B-Axis power: 19kW Chip conveyor: Yes Tool eye: Yes Hours: 4630H Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Nagel Citoborma 490 Paper Drill This is the largest Citoborma drill currently in production. Very good condition, ready for production. The machine has 4 drilling heads. Drilling waste is discharged into a basket located at the rear of the machine. The machine is operated using a foot pedal or two-handed buttons. Each head has a separate up/down adjustment, allowing for the use of drill bits of different lengths. The set includes spare drill bits, tools, and an instruction manual. Technical specifications: Number of drilling heads: 4 (each head can be quickly removed) Maximum stack height: 60 mm Drill bit size: 2-10 mm Adjustable spacing: 45 – 425 mm Two drilling speeds Guedpez Dr U Njfx Angsh 380V power supply Weight: 365 kg Made in Germany.

Condition: excellent (used), Drill diameter: 31.75 mm Spindle mount: MK 3 Variable speed control: 180 - 2100 rpm Overhang: 280 mm Table size: 350 x 450 mm Gujdpfoz Dt N Ijx Angeh Maximum distance between table and quill: 700 mm Drive motor: 380 V, 0.9/1.3 kW Weight: 270 kg

Condition: used, maximum load weight: 36,600 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 06/2027, total width: 2,460 mm, Year of construction: 2021, Equipment: ABS, 3-axle KRONE Multi-Container chassis SDC27 eLTU70 with TRACTIONHECK First registration 07/2021, from first owner Mileage only 128,447 km Gusdpfx Anez Dza Usgjh CONDITION: 1A, top Central tube frame made of high-quality fine-grained steel, pneumatically extendable rear Manually extendable container beam at the front Front extension with front-end locking and pivoting twist lock Container locks for the following containers: 1x 40 FT container with tunnel 2x 20 FT containers 1x 20 FT container flush at the rear 1x 20 FT container centered 1x 30 FT container and 45 FT container with long tunnel, angled corners, can be driven without special permit!! B-dimension 12,000 mm BPW axles with large disc brakes, 430 mm Lifting and lowering system with automatic ride height reset Tires: 6x 385/55 R 22.5 WABCO trailer EBS with vehicle stabilization function RENTING is the new BUYING, with us, it is ALSO available immediately in a full-service rental agreement-----

Condition: used, functionality: fully functional, Year of construction: 2010, machine/vehicle number: L2D, The Atlas Copco Boomer L2D (now under Epiroc) is a heavy-duty, twin-boom hydraulic face drilling rig designed for underground mining, tunneling, and large-scale civil engineering projects Gedpfx Anjz D Alfsgjuh

Condition: used, bore capacity in steel (diameter) 25 mm Godpfx Asyfwy Rjngeuh throat 220 mm bore stroke 110 mm taper MK 3 MK table-size 350 rund mm turning speeds 100 - 2080 U/min connected load frequency 400 V total power requirement 0,9 KW weight of the machine ca. 0,2 t dimensions 0,8 x 0,6 x 1,9 m

Condition: used, functionality: fully functional, Pinheiro AMA2 310 multi-blade crawler saw Track width: 310 mm Cutting width: 305 mm Guedpoycvy Rofx Angeh Cutting height: 95 mm Blade size: 250-350 mm Feed rate: 7-45 m/min Total power: 24.6 kW

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm 19 mm Weldon 0.4 kW 361 mm 238 mm 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Godpfx Aoyrhtnsngsuh Compressed air ejector

Condition: used, Loading utility 500 Liter weight 0,3 t dimensions 1750 x 730 x 1080 m Gujdeyrhvcjpfx Angjh Electric tipper - Operating time with a fully charged battery: 8-10 hours - Battery charging time: 6-7 hours - Hydraulic tipping

Condition: used, bore capacity in steel (diameter) 40 mm arm length 1600 mm bore capacity in cast iron 60 mm spindle diameter 85 mm tool taper MK 5 speeds 24 - 1050 U/min feeds 0,06 - 1,0 mm/U column diameter 345 mm vertical adjustment of the arm 900 mm thread cutting attachment ja Boring motor 5,5 kw total power requirement 7,5 kW weight of the machine ca. 4000 kg dimensions of the machine ca. 2,5 x 1,0 x 2,99 m Radial drilling machine - Mounting cube 750 x 500 x 500 mm - Digital display for boom travel Gujdpfxsyrtxve Angeh - Coolant system - Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, actuation type: electric, rotational speed (max.): 1,700 rpm, rotational speed (min.): 25 rpm, total width: 1,070 mm, total length: 2,500 mm, total height: 2,840 mm, table width: 630 mm, table length: 800 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, Special Offer – 5% Discount Available! Industrial Radial Drilling Machine The Industrial Radial Drilling Machine is a robust and reliable solution designed for precision hole machining in production plants, maintenance workshops, and metalworking facilities. Its rigid construction ensures excellent stability, high accuracy, and dependable performance, even during demanding industrial applications. Gusdpsytf Thefx Angjh The machine is suitable for a wide range of machining operations, including drilling, reaming, countersinking, boring, and tapping. The large working range and adjustable radial arm allow efficient machining of large and heavy workpieces without repositioning. Main Features • Rigid industrial construction • Wide spindle speed range • High drilling capacity • Suitable for drilling, reaming, boring, countersinking and tapping • Stable and precise operation • Easy machine operation • CE certified Technical Specifications • Maximum drilling capacity: 50 mm • Distance from spindle nose to table: 400–1580 mm • Distance from spindle axis to column: 370–2000 mm • Spindle travel: 400 mm • Spindle taper: MT5 • Spindle speed: 25–1700 rpm • Number of spindle speeds: 16 • Column diameter: 350 mm • Main motor power: 4 kW • Table dimensions: 800 × 630 × 500 mm • Machine dimensions: 2500 × 1070 × 2840 mm • Machine weight: 3500 kg Applications • Drilling • Reaming • Countersinking • Boring • Tapping • Metal fabrication • Maintenance workshops • Manufacturing plants Delivery and Support The machine is supplied brand new and includes a 12-month warranty, warranty service, and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, DRILLING AND MILLING MACHINE MTP ZAY7025V - 700 X 180 MM Manufacturer: Metal Technics Polska Model: MTP ZAY7025V Year: 2026 Condition: New, fully functional Price: EUR 2,125 net EXW + VAT where applicable Location: Sokolow Podlaski, Poland DESCRIPTION The Metal Technics Polska MTP ZAY7025V is a compact and versatile drilling and milling machine designed for drilling, milling, tapping and general machining operations. With infinitely variable spindle speed, a tilting milling head and a large precision cross table, the machine is suitable for metalworking workshops, maintenance departments, tool rooms, educational facilities and small-scale production. The machine is available with 400 V three-phase or 230 V single-phase power supply. MAIN ADVANTAGES • Drilling, milling and tapping in one machine • Forward and reverse spindle rotation for thread cutting • Infinitely variable spindle speed: 50-3000 rpm • 2-speed gearbox for efficient power transmission • Milling head tiltable from -90° to +90° • Large cross table: 700 x 180 mm • Digital spindle speed display • Digital spindle feed display • High concentricity thanks to precision spindle bearings • Ergonomic control panel • Safety guard • EMC filter according to CE requirements • Compact and robust construction • Choice of 400 V three-phase or 230 V single-phase TECHNICAL DATA • Drilling capacity in steel: 25 mm • Maximum face mill diameter: 80 mm • Maximum end mill diameter: 25 mm • Spindle taper: MT3 • Spindle travel: 52 mm • Spindle speed: 50-3000 rpm • Motor power: 1.0 kW • Table size: 700 x 180 mm • X-axis travel: 490 mm • Y-axis travel: 160 mm • T-slot size: 12 mm • Milling head inclination: -90° / +90° • Milling head height adjustment: 275 mm • Distance spindle to column: 170 mm • Spindle-to-table distance: 45-325 mm • Dimensions (L x W x H): 950 x 560 x 930 mm • Weight: 160 kg • Power supply: 400 V three-phase / 230 V single-phase STANDARD EQUIPMENT • B-16 drill chuck • Arbor • Digital spindle feed display • Digital spindle speed display • Forward/reverse spindle function • Safety guard • EMC filter • Service tools • Machine base / stand • Documentation and operating manual Gusdpfx Anoytpl Ujgsh DELIVERY Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide your delivery address or postal code to receive a transport quotation. The MTP ZAY7025V is an efficient and affordable solution for customers requiring drilling, milling and tapping capabilities in one compact professional machine. Contact us for availability, transport quotation or information about other Metal Technics Polska machines.