Used Mubea Miw 800 for sale (87)

Condition: ready for operation (used), A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible. Cjdpfx Acsx E Adps Nepu

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm - workshop overhauled Special tools and devices on request. Trade-in of used machines. Cjdoqfgy Hopfx Ac Nspu Europe-wide delivery possible.

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Cpjdpfxoium Eue Ac Neu Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: good (used), Year of construction: 1991, 1 piece Hydr. hole punch MUBEA type HP 1000 / 760. Year of manufacture 1991 Punching force 100 tons With punching saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m) swiveling and digital display, carriage clamping and foot switch Dimensions L x W X H 1930 x 780 x 1980 mm Projection 760 mm Working height 1135 mm Hole 40 in 22 mm Stroke 0 - 70 strokes Number of strokes at full stroke 11 strokes Drive power 8.5 kW Weight 3800 kg Cpjdpfetv Hzvox Ac Nou 3600 kg Used, ready for operation

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Csdexf Utaopfx Ac Nspu Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: used, Punching force: 350 kN (punches e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, allowing independent punching and shearing Csdpfxexqqphj Ac Nopu Support table on the punching side with stop cams A range of tools is included in the price

Condition: used, sheet width - max. 300 mm Cedpfx Acouvd A Ee Nopu plate thickness 8 mm flat steel 80 x 10 mm blade length 300 mm machine length 860 mm machine height 565 mm weight of the machine ca. 172 kg Long measuring shear Machine dealer with own stock of 1600 m².

Condition: used, Punching force: 300 kN For example, punch a 20 mm hole in 12 mm steel Stroke triggering via foot switch Cjdpfx Acsxcndye Nspu Assortment of tools is included in the price

Condition: used, Punching force: 350 kN For example, punch a 23 mm hole in 12 mm steel Cedpsxcnccofx Ac Njpu Stroke triggering via foot switch Support table with folding cams Assortment of tools is included in the price

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg Cpjdpov N Hrtsfx Ac Neu • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm square iron: 20 mm round iron: 18 mm Cpodpfxjtx Uqae Ac Nsu weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: ready for operation (used), Pressure force: 10 tons Projection: 110 mm Codehtq Hfspfx Ac Njpu Required space: 300 x 170 x 680 mm Weight: 32kg

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm Cjdpfx Acsvkix Ee Njpu hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 28 x 10 mm hole punching press: capacity (dia. x thick.) 23 x 12 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m

Condition: used, round bar steel 30 mm square edge steel 28 mm L-beam 90 x 8 mm 150 x 8 mm pressure 35 t total power requirement 2,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,75 x 1,0 x 1,5 m Profile steel shears combined with: - Foot switch Cpodpfxovu Hb Se Ac Neu - Length cut

Condition: used, Sheet metal width - 170 mm, Sheet thickness 8 mm. 80 x 10 mm, flat steel Steel bar cutting stencils for round D 20 mm and rectangular 20x20mm Knife length 170 mm. Sheet holding device Machine length 800 mm (1000 mm with moveable base) Machine height 500 mm plus 560 mm for base Machine weight 255 kg,. on mobile base Cedjc Uqkcepfx Ac Nepu

Year of construction: 1982, condition: good (used), machine/vehicle number: 0155282778711, OFFER 21455 Technical data: - Pressure capacity 450 KN - punches e.g. up to 25 mm Ø in steel 15 mm - stroke infinitely variable 0 to 60 mm - stroke rate approx. 16 to 47 1/min - throat 760 mm Cedohkr Daopfx Ac Njpu - Installation height 215 mm - working height 1150 mm - Drive 400 V / 7,5 kW - Space requirement approx. W 850 x H 1850 x D 1650 mm - Weight approx. 1350 kg - with: - E. foot switch - 20 pieces div. hole punches + dies

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm Cedjpuy H Dopfx Ac Nopu - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: Cpsdpfxerll I Ue Ac Nju - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: good (used), OFFER 70105 Cpsdpsg T S Axofx Ac Nsu Technical data: - Hole diameter approx. 44 , 45 , 48 , 52 , 2 x 55 , 2 x 58 , 61 , 66 mm - 2 x 68 , 2 x 80 , 81 , 85 mm - oblong hole dimension approx. 12 x 42 , 12 x 50 , 18 x 55 mm - Punch holder 58 mm - punch height 54 + 58 mm - Adapter ring for punch - die height 30 + 40 mm - die outer diameter 90 + 140 mm - adapter ring for dies 90 - 140 mm - Weight approx. 90 Kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0504791315452, Offer 25218 Technical data: - Pressing force: 350 kN - Punching: e.g. up to 30 mm Ø in steel at 9 mm or up to 28 mm Ø in steel at 10 mm or up to 23 mm Ø in steel at 12 mm - Stroke rate: 72 1/min - Throat depth: 200 mm - Installation height: 293 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 550 × H 1450 × D 700 mm - Weight approx.: 400 kg - Including: Cjdpfxowuqpro Ac Nopu - stop table with adjustable stops - electric foot switch - machine base - various punches with die

Condition: good (used), Year of construction: 1999, Hydraulic steel bar shears with hole punch Fab. MUBEA Typ. HIW 750/510 Year 1999 Technical data Make Mubea Type HIW 750/510 Year of manufacture 1999 Punching pressure 75,000 kg Max. Hole capacity diam. 30 x 22 mm Stroke 70 mm Max. Stroke rate 42/min. Working radius 510 mm Flat steel 450 x 15 mm / 300 x 20 mm Angle steel 150 x 13 mm Cpjdpfou Sy Uzex Ac Nju Square steel 44 mm Round steel diam. 50 mm Installation dimensions L 2.0 x W 1.40 x H 1.80 m Weight approx. 2.5 t Equipment - Electrical contact stop 2000 mm - Tool cabinet - Various tools and accessories as per photos All information without guarantee. A demonstration is possible at any time in our showroom.

Year of construction: 1991, condition: used, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm notching: rectangle tool mm total power requirement 5,5 kW weight of the machine ca. 1260 kg Csded Ih Stopfx Ac Nepu dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: used, Year of construction: 1986, Max. punching force: 700 kN Cpodpfjf Nwqdsx Ac Neu Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Assortment of tools is included in the price Weight: 3,000 kg

Condition: used, Max. punching force: 1000 kN Projection: 510 mm Positioning unit from PEHU from 2019 for the punching side (max. X-axis approx. 1100 mm, Y-axis approx. 350 mm) Hydraulic hold-down device for profile and flat steel shears Cuts on the flat steel shear 500 x 20 mm Cpsdpfxowyuvao Ac Nju Holes e.g. 40 mm diameter in 22 mm flat iron Assortment of tools is included in the price Weight: 5,000 kg

Condition: used, Max. punching force: 500 kN Cpjdpsu T Nv Defx Ac Neu Throat: 610 mm Including assortment of punches and dies Weight: 1700 kg