Used Mubea Kl 350 for sale (93)

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Fpsdoxf Utaspfx Abgsp Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: used, Punching force: 350 kN For example, punch a 23 mm hole in 12 mm steel Stroke triggering via foot switch Fodpfxoxcncce Abgopp Support table with folding cams Assortment of tools is included in the price

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0504791315452, Offer 25218 Technical data: - Pressing force: 350 kN - Punching: e.g. up to 30 mm Ø in steel at 9 mm or up to 28 mm Ø in steel at 10 mm or up to 23 mm Ø in steel at 12 mm - Stroke rate: 72 1/min - Throat depth: 200 mm - Installation height: 293 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 550 × H 1450 × D 700 mm - Weight approx.: 400 kg - Including: Fpsdpfxjwuqprs Abgop - stop table with adjustable stops - electric foot switch - machine base - various punches with die

Condition: used, Punching force: 350 kN For example, punch a 23 mm hole in 12 mm steel Fjdpfewlpmdox Abgjpp Quick change device Stroke triggering via foot switch Notice table Assortment of tools is included in the price

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching Fpsdefndy Nepfx Abgjp -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Condition: used, Punching force: 350 kN (punches e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shears Fpedpexqqphefx Abgjp Two separate foot switches for the punching and shearing sides, allowing independent punching and shearing Support table on the punching side with stop cams A range of tools is included in the price

Condition: used, round bar steel 30 mm square edge steel 28 mm L-beam 90 x 8 mm 150 x 8 mm pressure 35 t total power requirement 2,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,75 x 1,0 x 1,5 m Profile steel shears combined with: - Foot switch - Length cut Fsdpfx Abjvu Hb Ssgjpp

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Fpedpfxev N Hrte Abgop Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1978, Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 Fodpfxewrn U Ho Abgspp -Printing capacity: 100 tons -Punching capacity: see photo type plate -Thrust: 500 mm -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg

Condition: used, Punching force: 300 kN For example, punch a 20 mm hole in 12 mm steel Fsdpfsxcndysx Abgepp Stroke triggering via foot switch Assortment of tools is included in the price

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm Fpsdpfjik Sl Hjx Abgep -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm Fpsdopuy H Depfx Abgsp - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: ready for operation (used), Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible. Fpsdpfx Asw U T Uvsbgep

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch Fsdjvdiduopfx Abgopp - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm - with support table Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: used, Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch -Punching tool: square notching tool -Punching dimensions: 40 x 79 mm square -Dimensions: 225/145/H95 mm -Weight: 10.6 kg Fedjcwn Hfjpfx Abgspp

Condition: used, Punching force: 500 kN Throat: 610 mm For example, punch a 30 mm hole in 15 mm steel Quick change device Fodpfx Aewlpryebgspp Stroke triggering via foot switch Assortment of tools is included in the price

Condition: used, Punching force: 500 kN Throat: 610 mm Fpedov Rfl Iepfx Abgep For example, punch a 30 mm hole in 15 mm steel Stroke triggering via foot switch Assortment of tools is included in the price

Condition: used, Max. punching force: 500 kN Throat: 610 mm Including assortment of punches and dies Fpjdpfx Aeu T Nv Dobgop Weight: 1700 kg

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm Fjdpfx Asxu Dxqsbgopp total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars *

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Fpedpfx Abjwnhd Hegsp Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1970, sheet width 170 mm Fedped N Spmefx Abgspp plate thickness 0 mm number of rolls 0 weight of the machine ca. 0,1 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), functionality: fully functional, Year of construction: 1991, Hole punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm . Flat steel shears: 500 x 18 mm Fpsdpfxsxtqu Ne Abgep . Notching device with rectangular tool up to 13 mm . Profile steel shears, L-steel, 90° mm . - Machine in good original condition!! approx. 70 sets of hole punching tools . .

Condition: used, sheet width - max. 300 mm plate thickness 8 mm flat steel 80 x 10 mm blade length 300 mm machine length 860 mm Fpjdpsuvd A Ejfx Abgep machine height 565 mm weight of the machine ca. 172 kg Long measuring shear Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate Fsdpfx Asu Id Rujbgopp accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Fpedpfx Abju Ickyogop Hand control / foot control *