Used Mounting Plate for sale (19,313)

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Nwedpfxozguums Ad Seh Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2009, roller diameter: 1,000 mm, overall weight: 800 kg, total length: 1,880 mm, total width: 1,100 mm, total height: 1,640 mm, HIGH Output of round shaped metal parts Can be used rolling bend segments, T-Pieces, Nipples, Tubes Automatic feeding tab;le Cutting speed 2 - 10 M/Min Max. out side diameter 1000 mm Rolling width: 1000mm Nwedpfx Aezgugvsd Sjh Rolling thickness prebending:1mm Length: 1880mm Width: 1100mm Height: 1640mm Weight: 800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, Number of T slots: 8 + 3 Jump from T to T: 280mm T size: 22mm Number of matching pieces:5 Length: 1250mm Width: 750mm Height: 2500mm Weight: 2900kg Njdpowu D Afjfx Ad Sowh

Year of construction: 2024, condition: new, Mobile panel transport cart New demo unit, year of manufacture: 2024 - Stacking of panel heights up to 1,600 mm, electrically operated - Tilt angle forward/backward 100°, electrically operated Nodpjw I Upnsfx Ad Sswh - Head joint rotation angle CW/CCW 180° - Head joint rotation angle: 360° - Load capacity 120 kg - Panel sizes up to 2,100 x 3,200 mm - Total height 2,090 mm - With 6 high-performance suction pads, width adjustable The Mobilifter ML-120 consists of: - A mobile chassis - An electric lifting and tilting system - An automatic vacuum unit - A wireless electric control - Weight 170 kg Availability: short notice Location: Flörsheim

Year of construction: 2025, condition: new, The universal assembly and adjustment device (HSK 63) for securely clamping all types of aggregates outside the machine—regardless of the design and machine interface. In addition to maintenance work on the aggregate, shank tools or complete tool sets can be reliably mounted and set up, whether in the aggregate itself, in tool holders, or on milling arbors—quickly, precisely, and safely. Thanks to compatibility with all standard machine interfaces, the device can be used flexibly, independent of the position and number of locking or support pins on the aggregate. Even tool holders with nesting turbines fit without issue. Whether it’s angle adjustments on the swivel unit, adjusting tool positions on the tracing aggregate, or tool changes on a multi-spindle drilling head—our assembly and adjustment device is THE essential tool for every workshop with a CNC machine. - Simple handling of aggregates of various designs - Suitable for all common machine interfaces - Safe clamping and alignment of tools - Universal use in assembly, service, and production - Robust construction for permanent use Nodpfx Aoxmb Nwsd Sowh Availability: immediately from stock Warehouse location: Flörsheim

Condition: used, Plate trolley as a welded construction made of steel used one-sided loading area made of plywood 5° incline Side bar height: 915 mm Trolley powder-coated RAL 5010 gentian blue permanent or surface-protected impact and scratch-resistant tires made of thermoplastic rubber on plastic rims with precision deep groove ball bearings, gray, "no marks" thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors 1500 x 370 Wheel diameter (mm)200 x 40 Nwedpfx Aswkbayod Ssh Load capacity (kg)500 Weight (kg)47.5 Dimensions (WxDxH, mm)1500 x 680 x 1200 Availability: short term Storage location: Flörsheim

Condition: new, Universal panel transport assistant Ideal, space-saving aid for edge banding machines, panel saws, and all other processing machines where the workpiece needs to be moved. Height-adjustable panel transport assistant Working height infinitely adjustable from approx. 900 mm to approx. 1,200 mm Special polygonal body with anti-slip coating for optimal grip in any position 5 heavy-duty swivel castors with high-quality locking mechanism for stable standing Automatically moves along edge banding machines and panel saws Weight: approx. 8 kg Availability: in stock Storage location: Hochheim Nodpjw I Uz Rofx Ad Sjwh

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise Nodpfowka Upox Ad Sewh - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: used, Plattenbelichtungssystem / CTP Plate Maker Heidelberg TopSetter 102 Serial-No. 2310 Year 2001 Njdpfjzgfvhsx Ad Sswh Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1970, condition: used, Sheet filter with 26 filter plates measuring 40 x 40 cm Additional title: Sterilising filter Material: stainless steel Position: on mobile stainless steel frame with wheels Njdpfxjzgcwpe Ad Sewh Features: 24 filter plates 40 x 40 cm, pressure gauges

Year of construction: 2026, condition: used, NEW, built in 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum board, cement fiber board, and planks. Examples: Doors, planks, MDF panels, cabinet fronts, gypsum board, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed andwith a set loading and unloading capacity. This allows you to easily automateyour loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical Specifications: - Manufacturer: Ka-Ma - Model: KR-1300-1 - Working width: 1,300 mm - Includes belt conveyor, length 3,000 mm - Working height: 930 ± 50 mm - PLC control, operated via a touch panel, Siemens S7-1200 - Loading and unloading of parts via 2 suction plates, length 442 mm - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel Njdpey S S Htsfx Ad Sewh - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min. - Electric motor power: 1.5 kW- Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: 2-circuit vacuum system with 4 additional suction cups and the ability to lift the panels 15 mm on one side before vertical movement; required for all materials that can be vacuum-sealed. YouTube link:?v=WpRUnvPFqN0

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T Nodpfoxaa Dgjx Ad Sjwh engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm Nsdpfx Aoy Rrywod Sswh - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm Nwedjxm Sagepfx Ad Sjh -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: used, mileage: 565,000 km, power: 338 kW (459.55 HP), first registration: 04/2021, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space length: 6,339 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Manufacturer Volvo Model FH460 8x2-6 Sawo hejs / Hiab X-DUO 102 E-2 Year 2021 Condition Very good Serial Number YV2RTY0FXMA869728 Ref. nr. 188152 Reg. date: 22-04-2021 Engine: D13K460 TC Hk: 460 Km: 565000 Gearbox: I-Shift (AT2612F) Eurotype: 6 D Diesel tank: 1 Tank liter: 510 L Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: FH Navigation: ? Leather seats: ? Plushing: ? Equipment package: New York Radio: ? Nwodozhh Dqopfx Ad Sjh Refrigerator: ? Disc brake: ? ABS: ? Engine brake: VEB + Tire Size: 385/65R22,5 - 315/80R22,5 - 385/65R22,5 Cover% left 30-60% Front suspension: Air Suspension rear: Air Wheelbase: 5600 mm Hydraulic system: ? Total weight: 32000 Kg Net weight: 15350 Kg Load capacity 16650 Kg Manufacturer: Sawo CLF 326 3W Wire hoist: ? Crane Make: Hiab X-DUO 102 E-2 Year: 2021 Tonsmeter: 10 Procrastination: 2

Condition: used, mileage: 462,000 km, power: 309 kW (420.12 HP), first registration: 06/2006, fuel type: diesel, overall weight: 40,000 kg, brakes: retarder, gearing type: automatic, emission class: euro4, Equipment: crane, soot filter, Crane: ----- Retarder, air conditioning, lifting mechanism, and steering axle – Fassi 800, 6x hydraulic, and fly jib, 6x hydraulic – grab lines. Suspension: Nedpfozhhwkex Ad Sjwh Leaf spring and air suspension.

Condition: used, mileage: 570,000 km, power: 353 kW (479.95 HP), first registration: 11/2007, fuel type: diesel, overall weight: 40,000 kg, brakes: retarder, gearing type: semi-automatic, emission class: euro4, Equipment: crane, Crane: ----- Retarder, air conditioning, lift, and steering axle – Hiab 166-5 with remote control. Nwedpfx Ajzhhu Nod Soh Suspension: Leaf spring – air suspension

Condition: good (used), Top of the range plate washing system for high throughput. Has come from Wembley Football Stadium where it was washing plates for the hospitality areas. Lovely condition and with options Nodpovd Eiysfx Ad Sjwh

Condition: used, mileage: 639,480 km, power: 427 kW (580.56 HP), first registration: 07/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 4,100 mm, loading space width: 2,430 mm, Year of construction: 2016, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, * German vehicle, second owner, well-maintained according to service schedule, very good condition * Retarder * Differential locks * Auxiliary heater * 2 x bunk * Refrigerator compartment * Auxiliary heater * Rear view camera * Navigation, TV Nwsdpfx Adezhhmxs Soh * Tow hitch with hydraulic connections * Alloy wheels * Tires 385/65 at the front, 315/80 at the rear, 50-70% tread * Steel tipper body 4.10 m x 2.43 m, lashing points, rear drop sides, spring-assisted side flaps * Foldable underrun protection * Gross vehicle weight 40,000 kg, vehicle length 7,900 mm * Crane HIAB 211 EP-4 HIDUO, remote control, 410 degrees swivel range, 4 x hydraulic extension, 5th and 6th control circuit, supports hydraulically extendable * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale.

Condition: new, For sale: High-quality industrial heater from HTT (the energy performer). Condition: New, unused; has been in storage (warehouse stock, slight storage marks possible). 🔧 Technical specifications: Manufacturer: HTT Part number: KA19-03910/1/1 Serial number: 6170G953 Power: 40 kW Voltage: 400-440V, 3 Phase (V/3Ph) Protection class: IP66 Design: Flanged Certification: CE 📏 Construction: Multi-element heater (multiple heating tubes) Nodpfx Adjyx I Sfj Sjwh Robust industrial design Aluminum connection box Flanged connection 💡 Applications: Heating of water and process liquids Industrial tanks Production installations Heating and process systems 📦 Included: Exactly what is shown in the photos

Condition: used, mileage: 211,043 km, power: 205 kW (278.72 HP), first registration: 03/2008, fuel type: diesel, empty load weight: 7,430 kg, maximum load weight: 4,560 kg, overall weight: 11,990 kg, tire size: 285/70 19,5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 4,800 mm, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 5,000 mm, loading space volume: 8 m³, loading space length: 5,000 mm, loading space width: 2,480 mm, loading space height: 700 mm, Year of construction: 2008, operating hours: 211,043 h, front tire size: 285/70 19,5, rear tire size: 285/70 19,5, number of beds: 1, Equipment: ABS, air conditioning, crane, cruise control, onboard computer, parking heater, sliding door, trailer coupling, truck registration, Reference number for inquiries: 41461 Iveco, ML180 E 28/P * Year of manufacture: 2008 * ABS, Anti-lock Braking System * Trailer coupling * Power windows * Air conditioning * Crane * Air suspension * Power steering * Sleeping berth * Auxiliary heater * Cruise control * On-board computer * Digital tachograph * Radio/CD player * OBU preparation * Electric windows and mirrors * AdBlue tank * Hydraulic suspension support * Remote control * Transmission type: Automatic * Suspension: Leaf / Air * Gross vehicle weight: 11,990 kg * Unladen weight: 7,430 kg * Payload: 4,560 kg * Permissible gross vehicle weight: 11,990 kg * Tire condition, front axle: 50% - 50% - Tire size: 285/70 R19.5 * Tire condition, rear axle: 40% | 40% - 40% | 40% - Tire size: 285/70 R19.5 * Wheelbase: 4800 mm * Tire sizes: 285/70 R19.5 * Interior dimensions: L = 5000 mm, W = 2480 mm, H = 700 mm * Interior volume: 9 m³ * Pallet spaces: 12 * Crane: MKG HLK 76 a3 * Year of manufacture: 2008 * Radio remote control * Highlight: MKG crane / Radio remote control Disclaimer: Subject to change, prior sale, and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Processing of all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Nsdpfezhfxfex Ad Sswh Please ask our trained specialists, we will be happy to advise you.

Condition: used, mileage: 59,000 km, power: 324 kW (440.52 HP), first registration: 04/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, loading space length: 3,350 mm, loading space width: 2,450 mm, loading space height: 400 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, MAN TGS 26.440 / 6x6 Sattelzugmaschine + CRANE + JIB + REMONTE CONTROL Nedpfx Aozhdxwod Sjwh Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 59 000 km EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH ? AUTOMATIC AIRCONDITION PLATFORM: 335 x 245 x 40 cm (L x W x H) CAPACITY: 15 500 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 360/140 cm TIRE SIZE: FRONT : 335/65R22,5 BACK : 315/80R22,5 SUSPENSION: FRONT : SPRING BACK : AIR CRANE: EFFER 585 6/S + JIB 6S + REMONTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 5270

Condition: used, mileage: 761,000 km, power: 324 kW (440.52 HP), first registration: 10/2009, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, Year of construction: 2009, Equipment: ABS, air conditioning, crane, parking heater, MAN TGX 18.440 TRAKTORUNIT + CRANE + REMOTE CONTROL / 4x2 Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 761 000 km EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH ? AIRCONDITION TOTAL WEIGHT: 18 000 kg WHEELBASE: 420 cm TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 SUSPENSION: FRONT : SPRING Nwsdpfxey Sq Hxs Ad Sjh BACK : AIR CRANE: PALFINGER PK 29002 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 9538

Condition: used, mileage: 867,000 km, power: 324 kW (440.52 HP), first registration: 06/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, Year of construction: 2012, Equipment: ABS, air conditioning, crane, parking heater, MAN TGX 18.440 TRAKTORUNIT + CRANE + REMOTE CONTROL / 4x2 Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2012 ? MILAGE: 867 000 km EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS Nwedoy R Ihkspfx Ad Soh ? ENGINE BRAKE ? TACHOGRAPH ? AIRCONDITION TOTAL WEIGHT: 18 000 kg WHEELBASE: 420 cm TIRE SIZE: 385/65R22,5 SUSPENSION: FRONT : SPRING BACK : AIR CRANE: PALFINGER PK 34002 - SH G + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 7735

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally available with F705, F805, F905 incl. L436 Fly-Jib and V20 winch!!! Nwedpfeyxinzsx Ad Ssh TipMatic – Automatic Transmission 8x2 Three steered axles STEERED / LIFT axle Front support approx. 14,000 KG Platform body with drop sides 6200x2550x600 mm Access steps Checker plate flooring Removable drop sides 9 x LED lighting units Extendable overwidth markings to 3,500 mm Start/Stop Amber beacons 8 x stake pockets 6 x lashing rings 6500 daN Toolboxes Towing hitch (AHK) Storage compartments Utility boxes 20-foot container locks Perforated side profile with lashing rings 2500 daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, wire winch, cross-format radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory package for winch operation, folding pulley, quick coupling between main boom and fly jib, and much more... TECHNO SERIES!! NEW CRANE model Infinite slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Dual knuckle lever system with PROLINK (overbending jib up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical warning (90% and 100%) Pressure limiting and load-holding valves XF-System (Extra Fast) + XP-System (Extra Power) + FL-System (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on display Danfoss D900 control block with 4 control valves mounted to crane pillar Emergency manual control for crane functions High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted to crane base Hydraulic support legs, hydraulically extendable on both sides, support width 10.00m, support can be operated via remote control Standard color RAL 3020 traffic red – all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Load hook and mounting bridles (short/500mm) Travel position: folded transversely to driving direction Note: Observe on-board voltage / 12V or 24V, standard is 24V FASSI stability control FSC-TECHNO Fassi V7S remote maxi – 8 linear levers Proportional control block for support legs 180° hydraulically tiltable outriggers – both sides Preparation for operation with variable displacement pump (LS) Control system for 2 additional functions with 2 hose guides / hxp-techno Auxiliary jib (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for jib, fitted for 2 functions Control system for auxiliary function (winch) Winch type V20 – 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently installed rope guide rollers for operation with auxiliary jib AWC – (Automatic Winch Control) for crane – automatic winch management AWC – (Automatic Winch Control) for JIB – automatic winch management Work lights operable via display or remote 1 LED work light fitted to knuckle boom 1 LED work light fitted to jib LED for 2 outrigger legs, not fitted (crane) LED for 2 outrigger legs, not fitted (auxiliary support beam) Electrical rotary manifold with 14 slip rings 1 zinc primer from 720RA to F820RA Zinc primer for JIB “L42” Additional cost for Dinitrol application (cavity protection) Additional cost for stainless steel