Used Mori Seiki Junior for sale (177)

Condition: used, Year of construction: 1998, turning length: 800 mm, turning diameter: 600 mm, spindle bore: 127 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, Mori Seiki SL-400B CNC Lathe (1998) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 1998 Control System: Mori Seiki MSC-501 Machining Capacity Maximum Turning Diameter: approx. 600 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 940 mm X-Axis Travel: approx. 343 mm Z-Axis Travel: approx. 993 mm Spindle Nose: A2-11 Spindle Bore: approx. 127 mm (5") Spindle Speed: up to 2,400 rpm Spindle Motor Power: approx. 30 kW Tool Turret: 12 Stations Machine Weight: approx. 9,500 Machine Dimensions (L × W × H): approx. 4,300 × 2,000 × 2,100 mm Isdpfx Ajx Hpw Sjffetr

Year of construction: 2007, condition: used, 4 pcs. rope pulleys for counter weight of a FB 225 Isdsd Nbkzjpfx Affjtr

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 920 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 1,000 mm, feed length Y-axis: 850 mm, feed length Z-axis: 920 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, controller model: MSX 502 III, workpiece height (max.): 1,100 mm, workpiece diameter (max.): 1,100 mm, workpiece weight (max.): 1,500 kg, table width: 630 mm, table length: 630 mm, table load: 1,500 kg, rotational speed (max.): 6,000 rpm, overall weight: 24,000 kg, spindle speed (max.): 6,000 rpm, coolant supply: 50 bar, distance table to spindle center: 900 mm, distance table center to spindle nose: 1,070 mm, spindle motor power: 25,000 W, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MANUFACTURER MORI SEIKI MODEL MH-633 CATEGORY Horizontal machining center YEAR 2000 CNC CONTROL MORI SEIKI MSX-502 III MACHINE WEIGHT (kg) 24,000 DIMENSIONS (width. x lenght. x height.) (mm) 3,390x5,320x3,121 (w/o APC) NUMBER OF AXIS 3 CE DECLARATION YES SPINDLE Cone dimension BT-50 Max spindle speed (rpm) 6,000 Max spindle motor power (cont./30 minutes) (kW) 22 / 25 CAPACITIES X axis (mm) 1000 Y axis (mm) 850 Z axis (mm) 920 Distance spindle center - pallet surface (mm) 50 - 900 Distance spindle nose - pallet center (mm) 150 - 1070 Max piece size (diam. x height) (mm) Ø x TABLE Dimension (mm) 630 x 630 Number of stations 2 stations with 1 pallet each. Load capacity (kg) 1,500 Rotation indexed 360 position MULTIPALLET (APC) Number of station 11 Number of loading & unload. Position 1 Pallet changer 2 positions Rotation max encumbrance (mm) Ø 1100 x 1100 FEEDRATES Rapids X/Y/Z axis (mm/min) 20,000 Working feeds X/Y/Z axis (mm/min) 1 - 5,000 Motors power (kW) X: 3.8 | Y: 4.8 | Z: 4.8 Iedpfx Afet Uu Iiefstr TOOL CHANGER Tool cone BT-50 Pull stud Type Mori Seiki 90° Tool storage capacity 240 stations Max tool diameter (with/without full adjacent stations) (mm) Ø120 / Ø300 Max tool lenght (mm) 500 Max tool weight (kg) 30 ACCESSORIES Tank and chip conveyor High pressure pump (50 bar) with autoclaening filter Lubricant throughout the spindle line Coolant system for spindle line Presetting Manuals, electric schematic

Condition: good (used), Year of construction: 2003, functionality: fully functional, GENERAL Project No.: 905722 Quantity: 1 pc. Manufacturer: MORI SEIKI Type: SL 2500 Y/650 Control: MSG-805 L MAPPS Year build: 2003 Condition: Used Machine DESCRIPTION TURNING Max. turning diameter 356 mm Max. turning length 655 mm Max. Swing diameter over bed 520 mm Max. Swing diameter over cross slide 250 mm Max. Swing diameter over bed cover 755 mm Max. speed main spindle 4500 1/min Max. power main spindle at 10-40/100% duty ratio 18 kW Iodjv Tbf Aopfx Affjtr Spindle bore main spindle 75 mm Spindle flange size main spindle A2-8 Axis at main spindle unit C Hollow clamping cylinder at main spindle Tailstock NC-controlled 1 pc. Upper turret No. of stations/driven 12/12 Speed tool drive 6000 1/min Axis in turret X/Y/Z Travel in X/Y/Z 160/120/590 mm Max. rapid traverse in X/Y/Z 18/-/24 m/min FURTHER EQUIPMENT Tool life time monitoring Fully enclosed work area Light in working area Preparation for central oil-/emulsion mist extraction unit Scraper-type chip conveyor Machine operates/operated with oil Flush gun Coolant unit High pressure pump 40 bar Automatic CO2-fire extinguishing system Finish-part pick-up unit Bar loader/magazine FMB turbo 8-80 Warning lamp ACCESSORIES 1 pc. Collet chuck mm 1 Set Tool holder for turning tools 1 Set Tool holder for driven tools GENERAL TECHNICAL DATA Mains fuse 142 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 3495 x 2050 x 2222 mm Machine weight approx. 5800 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: excellent (used), functionality: fully functional, CNC lathe Mori Seiki CL203, year 2000, with tailstock and conveyor, including tooling and documentation Ijdexhdzlopfx Affstr

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Memory capacity up to 1000 programs Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Ijdpfjd Hkucjx Affotr Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest

Condition: used, Year of construction: 1998, turning length: 800 mm, turning diameter: 600 mm, spindle bore: 127 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, Mori Seiki SL-400B CNC Lathe (1998) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 1998 Control System: Mori Seiki MSC-501 Machining Capacity Maximum Turning Diameter: approx. 600 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 940 mm X-Axis Travel: approx. 343 mm Z-Axis Travel: approx. 993 mm Isdpfx Afjx Hpvuefetr Spindle Nose: A2-11 Spindle Bore: approx. 127 mm (5") Spindle Speed: up to 2,400 rpm Spindle Motor Power: approx. 30 kW Tool Turret: 12 Stations Machine Weight: approx. 9,500 Machine Dimensions (L × W × H): approx. 4,300 × 2,000 × 2,100 mm

Condition: ready for operation (used), Year of construction: 2000, Immediately available from site: CNC Vertical Machining Center Mori Seiki Model MV 653/50 Year of manufacture: 2000 CNC control: Fanuc MSG 501 Table: 1700 x 660 mm Table load capacity: 2 t Travel (X/Y/Z): 1530 / 660/ 650 mm Distance spindle – table: 200 – 850 mm Isdpfx Afex Iclrefstr Distance spindle – column: 690 mm Taper: SK 50 Spindle speeds up to 6,000 rpm Main spindle drive: 26/22 kW Tool changer: 40 positions Through-spindle coolant (IKZ) Feeds: 1 – 10,000 mm/min Rapid traverse: 24 m/min Creep feed: 0 – 1,260 mm/min Total connected load: 52.5 kVA Chip conveyor Weight: 16 t Price: EUR 6,000.00 plus VAT, ex site

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 510 mm Ijdpfx Asx Exvzoffstr Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Filtermist FX5000 emulsion extraction unit Renishaw OMP60 3D probe Chip conveyor Spindle chiller Documentation + circuit diagrams

Condition: ready for operation (used), Year of construction: 2013, Make: MORI SEIKI Type of machine: NH 4000 DCG Year of manufacture: 2013 Isdox H Ulbspfx Affstr Control system: CNC Machine's weight: 12300 kg Tool holder: SK 40 x-travel: 560 mm y-travel: 560 mm z-travel: 630 mm Speed range: 14 000 1/min max. Table load: 400 kg Table dimensions: 630x630 mm Number of tools in the magazine: 120 Pl Internal coolant supply: 40 bar

Condition: excellent (used), Year of construction: 2013, swing over cross-slide 360mm, Maximum cutting diameter 366mm, Maximum cutting length 705mm, Bar capacity 80mm, Spindle speed 4,000rpm, Itedpfjx Eitujx Affsr milling speed 10,000rpm, Main spindle power 18.5Kw, C axis 0.001 degrees, Y axis -/+ 50mm, 12 station turret. Mori Control M730BM, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher, barfeed unit

Condition: used, Year of construction: 2008, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control 810 D Powerline Siemens turning speed range - main spindle 20 - 8.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 table surface area 1.200 x 560 mm max. table load 1.000 kg table height over floor 720 mm T-slots 4x H12 / 1x 14 H7 number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg change time 1,6 sec change-time chip to chip 7,0 sec feed speeds 20.000 mm/min rapid traverse 25 m/min total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - Machining Center Vertical DMG MORI SEIKI - DMC 1035 V ecoline Iedpfstzvy Tox Affotr - only 3.800 spindle hours

Condition: ready for operation (used), Year of construction: 2007, operating hours: 57,320 h, General Data Machine weight 9800 Main Drive Spindle speed range 14000 Tool taper BT 40 Itedpfx Ajx D Sk Tjffor Number of axis 4 Movement X-Axis Movement 560 mm Y-Axis Movement 560 mm Z-Axis Movement 630 mm Table Outer length 400 mm Outer width 400 mm Table load 400 kg Tools Slots in storage 60 Max weight 8 kg This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2007. A robust horizontal machining centre, it offers advanced capabilities for efficient and precise operations. Ideal for those seeking high-quality machining, this unit represents a significant asset for any production environment. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2012, Mori Seiki NTX2000/1500SZ 5-Axis Mill/Turn with MAPPS/F31iB5 Control, Max Workpiece Swing Diameter 660mm, Max Swing Over Cross Slide 660mm, Max Turning Diameter 610mm, Max Turning Length 1540mm, Bar Work Capacity 65mm, Travel X/Y/Z/X2/Z2 = 495/250/1560/160/1402mm, Main Spindle Kitagawa 8”dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 76 Position ATC, Spindle Taper Capto C6 at 12,000rpm, High-Pressure Coolant, 10 Station Indexing Turret, Swarf Conveyor, Machine Weight 15,000kgs, Floor Space (LxWxH) 4076 x 2890 x 2626mm (2012) Isdpfox Hxk Uex Affstr Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2011, Make: MORI SEIKI Type of machine: NH 4000 DCG Year of manufacture: 2011 Control system: CNC Machine's weight: ca. 12300 kg Tool holder: SK 40 x-travel: 560 mm y-travel: 560 mm z-travel: 630 mm Speed range: 14 000 1/min Isdpfx Afjx H Ub Njfotr max. Table load: 400 kg Table dimensions: 630x630 mm Number of tools in the magazine: 120 Pl Internal coolant supply: 40 bar

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 3755 mm Measurements depth 2300 mm Measurements height 2610 mm Machine weight 9600 kg Main Drive Spindle speed range 14000 rpm Tool taper 7/24 Taper No. 40 Number of axis 4 Movement X-Axis Movement 560 mm X-Axis Rapid Traverse 50000 mm/min Iodpjx D D U Rsfx Affstr Y-Axis Movement 560 mm Y-Axis Rapid Traverse 50000 mm/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 50000 mm/min Table Outer length 400 mm Outer width 400 mm Table load 400 kg This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2006 and features a horizontal machining centre with only 1,300 hours on the main spindle, which was overhauled in April 2022. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI NH 4000 DCG machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2008, operating hours: 37,200 h, condition: ready for operation (used), General Data Measurements width 1667 mm Measurements depth 1975 mm Machine weight 2800 kg Control Unit Brand Mori Seiki Model MSX -805II Itjdox D Ezropfx Affjr Main Drive Spindle speed range 3500 Spindle motor power 11/7.5 kW Number of axis 2 Movement X-Axis Movement 245 mm Z-Axis Movement 370 mm Turret Number of turrets 1 Tools Number of station 10 This MORI SEIKI CL2000B was manufactured in 2008. A robust horizontal turning machine featuring a max turning diameter of 440 mm and length of 363 mm. It includes a 10-station turret and an 8-inch chuck. The control system is the Mori Seiki MSX-805II. Consider the opportunity to buy this MORI SEIKI CL2000B horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 1999, General Data Measurements height 2860 mm Machine weight 3800 kg Control Unit Brand MITSUBISHI Main Drive Spindle speed range 12000 rpm Spindle motor power 7.5/5.5 kW Tool taper 7/24, No. 40 Movement X-Axis Movement 510 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Table Number of tslots 5 Table load 350 kg Tools Number of index 25 Max weight 6 kg Max tool diameter 100 mm Max tool length 250 mm Ijdpfx Afjx D D Evjfjtr Media Power consumption 22.5 kVA Additional Equipment APC (Automatic Pallet Changer) - Only for CV-500A (APC): Number of Pallets: 2 Pallet Change Method: Front rotation This 3-axis MORI SEIKI CV-500 was manufactured in 1999. Ideal for precision CNC milling, this machine maintains robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI CV-500 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 1989, condition: ready for operation (used), Media Iodpfx Afex D R Rrjfjtr Chip conveyor Yes This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2012, operating hours: 6,500 h, condition: ready for operation (used), Main Drive Number of axis 3 Media Chip conveyor Yes Additional Equipment KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure (5 bar) Hinged belt conveyor, right-hand discharge Integrated parts catcher for the main spindle Interface for bar feed, LNS Double foot switch with protective cover Signal light (red, yellow, green) Tool overhang length 100 mm for driven Y-axis travel + Tool holder package Transformer 45000 VA 15 bar pump with filter Itedox D D Uwspfx Affer This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,000 h, Control Unit Brand FANUC Model MSX-701 IV Itjdpfxjx D Ixmo Affjr This MORI SEIKI NZ1500 was manufactured in 2010. It features an MSX-701 IV control system, dual spindles with a maximum speed of 6000 rpm, and two turrets with capacities of 16 positions each. The machine includes a bar feeder for materials up to 1200 mm and a high-pressure coolant system with a 500-liter tank. Consider the opportunity to buy this MORI SEIKI NZ1500 turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 Spindle Speed 12000 RPM Tool taper BT 40 Itjdpfx Aox D H T Asffer Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 4 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Noteworthy are the through-spindle coolant and chip conveyor. Ideal for automated 4-axis machining, though it requires a new X-axis drive and is currently non-operational. Consider the opportunity to buy this MORI SEIKI SH400 horizontal machining center. Contact us for more information about this machine. Itsdpfx Afjx D H Uajfjr Application Types Milling

Year of construction: 2005, condition: ready for operation (used), Main Drive Spindle speed range 6000 Number of axis 6 Movement X-Axis Movement 260 mm Z-Axis Movement 590 mm Ijdpfx Afjx D R Ausfetr This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for tact us for more information. Application Types Turning

Year of construction: 1996, condition: ready for operation (used), Control Unit Brand FANUC Model na Isdpfox D Swmsx Affotr Main Drive Number of axis 2 Tools Number of index 12 This DMG Mori Seiki 150 SL was manufactured in 1996. A horizontal turning machine featuring a turning diameter of 150 mm, swing over saddle of 430 mm, and distance between centers ranging from 180 to 500 mm. It comes equipped with 12 tools. Consider the opportunity to buy this DMG Mori Seiki 150 SL horizontal turning machine. Contact us for more information. Application Types Turning