Used Monforts Rnc 4 for sale (36)

Condition: used, Year of construction: 1993, CNC Lathe Monforts RNC 4 with KNCS 260 chuck Collet up to Ø 60 mm Bar feeder up to Ø 65 mm Year of manufacture: 1988 Lots of accessories CNC Lathe Monforts RNC 4 with 15-series control and C-axis, KNCS 260 chuck, year 1995, lots of accessories RNC 5 Chucking-only lathe Year of manufacture: 1992 Includes many jaws Monforts RNC 7 with automatic tailstock, 1500 mm Z-axis travel Driven tools with spindle indexing every 2.5° Chuck 500 mm, many tools and jaws included Year of manufacture: 1993 Very good condition Hfodpfeyq R T Isx Ahvsd The last CNC lathe, an RNC 7-1000 with automatic tailstock, steady rest, C-axis Lots of tools and jaws Ideally, everything would be sold as a package — 5 Monforts lathes with a very large amount of accessories.

Condition: used, Year of construction: 2008, turning diameter 280 mm turning length 600 mm Turning diameter: 280 mm Turning length: 600 mm Hjdpfsydfqzsx Ahvofd

Condition: ready for operation (used), controller model: Siemens Sinumerik 840C, total width: 2,850 mm, total height: 2,300 mm, swing diameter over cross slide: 1,500 mm, additional equipment features: yes, Uitgerust met Shunk chuck dia 500 mm VDI-tools Voor het voltooien van moeilijke bochten! CNC-hoogrendementsdraaibanken, waarvan de sterke punten vooral tot uiting komen bij harddraaien. Een belangrijk kenmerk van alle Monfort-draaibanken is de hydrostatische ronde geleiding, die slijtagevrij is en een geoptimaliseerde trillingsdemping heeft. Bovendien levert deze op lange termijn optimale oppervlakteresultaten bij draaien, frezen, boren en draadsnijden. • Hoge stijfheid tegen snijkrachten • Zeer goede demping van trillingen • Dit resulteert in een lange standtijd • Hoogste draainauwkeurigheid • Weerstand tegen continue spanning • Absolute vrijheid van slijtage • Droog bewerken is mogelijk Monfort-lagers maken gebruik van hydrostatische lagersystemen en geleidingen. De voordelen hiervan zijn: - Uitstekende loopnauwkeurigheid - Uitstekende dempingseigenschappen - Hoge stijfheid, onafhankelijk van de snelheid - Goede thermische stabiliteit - Geen slijtage en dus langdurige nauwkeurigheid - Langere standtijd van het gereedschap Vergelijkbaar met de Hembrug hydrostatische precisiedraaibank Swing over bed: 720 mm Max longitudinal travel Z-axis: 1500 mm Max cross travel X-axis: 320 mm Spindle cone: A2-11 Dia of spindle bore: 110 mm Power on the spindle: 62 kW Number of speeds: 4000 rpm Length: 5600 mm with scrap conveyor Hjdpfxsyl A Efo Ahvsfd Weight: +-8500 kg Toolchanger: yes Number of tools: 12x

Condition: excellent (used), Year of construction: 2008, We are offering this very well-maintained Monforts RNC 600 MultiTurn CNC turning and milling center, year of manufacture 2008. Hsdpoyr N Hcsfx Ahvsfd

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 538/04, turning diameter over cross slide: 300 mm, turning length: 600 mm, spindle bore: 52 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, quill stroke: 90 mm, torque: 240 Nm, overall weight: 7,000 kg, swing diameter over bed slide: 440 mm, Equipment: documentation/manual, Well-maintained Monforts RNC 500, available for inspection under power. Hedpfx Ahjyrbmhsvofd Control: Fanuc 18 i TB 12 driven tool stations with VDI 40 holders Hydrostatic round guideway FAPT programming system Main spindle and sub spindle Chip conveyor Coolant system with flatbed filter Parts catcher with transfer device Ejector in sub spindle Short bar loader Samsys Multi 3000 Reduction tubes Rinsing gun C-axis Y-axis For additional machine equipment, see pictures

Condition: good (used), Year of construction: 1998, Ref. -No.: 10548 Manufacturer: MONFORTS Type: RNC 5 A17 Year of construction: 1998 Type of control: CNC Control: Monforts Hfsdpfx Aexmd T Eshvjd Storage location: Halberstadt Country of origin: Germany Machine-No.: 303XXXX Chuck diameter: 250 mm Centre Distance: 1080 mm Spindle Diameter In Front Bearing: 100 mm Spindle head according to DIN 55027 (size): Gr. 8 Circumferential diameter over radial slide: 290 mm Max swing diameter: 500 mm travel of the cross slide: 265 mm Tailstock outside diameter of the quill: 80 mm Tailstock maximum quill stroke: 160 mm Tailstock inner cone: MK 5 Type Material flow max.: 70 mm Turning Speed Range: 2 - 2800 rpm Further information: The machine can be viewed under power by arrangement.

Year of construction: 2000, condition: ready for operation (used), Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available. Hfsdpfxstxquhe Ahved

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. All tools and accessories are included. Inspection possible by appointment. Hfjdpfxoxcwdve Ahved

Condition: used, Year of construction: 1998, turning diameter 555 mm turning length 4000 mm control Monforts Control System type MTC-K CCUO turning diameter over slide rest 290 mm cross movement . mm spindle passage . mm turning speeds 1600 U/min transmission ratio . quill stroke . mm Hodpfx Aeyqv N Ushvofd rapid traverse . m/min main drive motor . kW 3-jaw chuck Rotha-S Plus 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Serial number: 262/01 Machine number: Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm Hfsdewwlt Ropfx Ahved turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment *

Year of construction: 1991, condition: ready for operation (used), Maschinentyp - CNC Drehmaschine / CNC lathe Hersteller/ Manufacturer - MONFORTS Modell RNC3 Baujahr / Year of manufacture - 1991 Steuerung /control typ: FANUC 15T Werkzeugenanzahl: 12 Stk angetriebene Werkzeuge / Number of tools: 12 pcs driven tools Die Spindel kann bei 2,5 Grad positioniert werden / The spindle can be positioned at 2.5 degrees 3-Backen-Hydraulikfutter / 3-jaw hydraulic chuck Automatische Werkzeugmessung / Automatic tool measurement Hfsdpfxewqc Rto Ahvjd Späneförderer / Chain conveyor Kühlwasserausrüstung / Cooling water equipment Preis: auf Lkw geladet / Price: loaded on truck Mit Dokumentation / With documentation Die Maschine steht schon nicht unter Strom. Wegen neue Maschine kauf möchten wir verkaufen, bis die Demontage hat alle gut funktioniert./ Because of new machine purchase we would like to sell until dismantling has everything working well.

Condition: used, Year of construction: 1996, swing diameter 530 mm turning diameter 150 mm spindle passage 65 mm control SIEMENS 840 C travel x1 175 mm travel y1 +/- 70 mm Hfedpfx Aevh Nbnehvod travel z1 433 mm travel x2 175 mm travel y2 +/- 70 mm travel z2 433 mm spindle turning speed range 38 - 4000 U/min C-axis 2 x tool turret 2 x 12 Pos. number of driven tool stations 2 x 12 tool shaft (cylinder shaft DIN 69880) VDI 30 total power requirement 33 kW dimensions of machine L x W x H 3,95 x 2,49 x 2,6 m Accessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolant

Condition: used, Technical details: turning diameter over bed: 830 mm turning dia. over face-slide: 540 mm turning length: 3000 mm turning diameter over support: 540 mm centre distance: 3000 mm faceplate diameter: 800 mm Hfodpswmlknofx Ahved Rapid feed X axis: 4 m/min. control: MTC K (Monforts) range of revolution per miute: 2 -1.600 U/min spindle passage: 88 mm tailstock taper ISO: MK6 tailstock quill stroke: 200 mm max. workpiece weight between centers: 1250 kg max. workpiece weight -without tailstock: 3000 kg turning dia. in gap: 1.200 mm length of gap: 310 mm Weight approx.: ca. 6.85 (ohne Späneförderer und Kühlmittelbehälter) t dimension machine xH: 2,55 x 1,1 x 1,29 m Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Three-jaw chuck D=500mm without clamping jaws Various accessories *

Condition: used, Year of construction: 1998, turning diameter 650 mm turning length 2000 mm control MTC K turning diameter over slide rest 360 mm Hedpfxsyutrhj Ahvefd turning speeds 1800 U/min 3-jaw chuck 315 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,500 rpm, overall weight: 3,120 kg, controller manufacturer: FANUC, controller model: 0i-TC, This Monforts TNC 300 SingleTurn was manufactured in 2009. A robust horizontal turning machine featuring a Fanuc 0i-TC control system, 10 tool stations, and a three-jaw power chuck Kitagawa 8''. It includes a hydraulic hollow clamping device and a chip conveyor. Ideal for high-quality turning capabilities. Contact us for more information about this machine. Additional equipment • Three-jaw power chuck Kitagawa 8'' (200 mm) • Hydraulic hollow clamping device (diameter 52 mm) • Chip conveyor chain hinge belt • Coolant system: 10 bar • One hadwheel • Collet chuck CRL-42-A6 (diameter 42 mm) • Automatic tool measurement • Short bar loader for bar length: 1200 mm Machine Benefits Technical Machine Benefits • Max. Torque: 124 nm Hsdpfx Ajx D D U Djhvjfd • Rapid traverse x-axis: 30 m/min / rapid traverse z-axis: 30 m/min • Position accuracy: ±0. 005 mm / repeatability: ±0. 002 mm • Rotating diameter over bed: 480 mm / rotating diameter over cross slide: 320 mm / turning length: 500 mm • Number of tool stations: 10 / vdi size: 30 / shank diameter: 30 mm • Pinole diameter: 65 mm / quill stroke: 50 mm / tailstock travel: 425 mm / quill inner taper: mk4 • Quill inner taper: mk4 / max. Material passage: 52 mm • Spindle diameter in front bearing: 100 mm / spindle height: 900 mm Dimensions Machine Depth 2780 mm

Condition: ready for operation (used), Year of construction: 1999, number of axes: 2, This Monforts KNC 6 S was manufactured in 1999. A robust horizontal turning machine featuring a maximum turning diameter over bed of 650mm and a maximum turning length of 2,000mm. It includes an R&D control unit, enhancing its operational capabilities. If you are looking to get high-quality turning capabilities, consider the Monforts KNC 6 S machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Rotation ⌀ max. Over support: 340 mm • Turn ⌀ max. Over bed: 650 mm • Max. Turning length: 2000 mm Hsdpfx Aeyail Ijhvefd Extra Information Machine still under power

Condition: used, Year of construction: 2000, turning diameter 500 mm Hfsdpfx Aevh Ncrjhvod turning length 1500 mm control MONFORTS CONTROL control SYSTEM MTC-K turning diameter over bed slide 290 mm spindle bore 70 mm spindle turning speed range 3 - 2800 U/min spindle power 15 kW max. torque on the spindle 1530 Nm spindle head DIN 55027 Gr. 8 feed power X/Z axis 11300 N rapid travel - longitudinal/face 10 / 5 m/min bed width 360 mm travel of cross-slide 265 mm upper slide travel 140 mm turning tool - shaft cross cut 32 x 25 mm tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock taper MT 5 weight of the machine ca. 3,3 t dimensions of machine L x W x H 3,45 x 1,65 x 1,93 m Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Hfodsym Naljpfx Ahvsd Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: good (used), functionality: fully functional, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, overall weight: 3,300 kg, Monforts KNC5-1500 Lathe in good condition for sale. The machine operates perfectly. Included accessories comprise all documentation, a quick-change toolholder, and a chip conveyor as shown in the photos. Inspection under power is gladly possible. Loading can be arranged by forklift or crane. Working area: Distance between centers: 1,580 mm Swing over bed: 500 mm Swing over cross slide: 290 mm Cross slide travel: 265 mm Top slide travel: 140 mm Bed width: 360 mm Cross slide width: 220 mm Bed slide guide length: 615 mm Turning tool shank size: 32x25 mm Spindle diameter at front bearing: 100 mm Spindle nose as per DIN 55027, Size 8 Bar capacity: 70 mm Spindle taper (metric): 80 Main drive: steplessly variable, three-phase AC motor Drive power (50/100% duty cycle): 15/11 kW Total speed range: 2-2,800 rpm Gear stage I: 2-280 rpm Gear stage II: 7-1,120 rpm Gear stage III: 28-2,800 rpm Three-phase servo drive with mechanical safety clutch Rapid traverse speed longitudinal/cross: 10/5 m/min Thread cutting range: longitudinal and taper threads, pitch 0.001-500 mm Tailstock: quill diameter 80 mm Quill stroke 160 mm Internal taper MK5 Tool system: Multifix quick-change toolholder, size C Coolant system: pressure/delivery rate 0.4 bar / 10 l/min Hfedpsypbcdjfx Ahvsd Machine dimensions (LxWxH): 3,330 x 1,550 x 1,790 mm Weight (transport unit): approx. 3,300 kg Bed: – Torsion-resistant bed, guideways hardened and ground Gearbox: 3-stage with limit switch monitoring Spindle: – Front spindle bearing: double-row cylindrical roller bearing with tapered bore combined with double-row angular contact bearing – Electric holding brake in main drive motor – Full-length cross slide with adjustable gib Longitudinal and cross feed driven by variable-speed three-phase AC motor via precision ball screw Feed and rapid traverse operated via cross selector lever Longitudinal and cross movements via electronic handwheels Increment selector switch in combination with electronic handwheel Additional contour handwheel Automatic central lubrication for guideways and ball screws Clampable top slide – Quick-change toolholder – Bedway clamping by excenter lever – Additional clamping via tension bolts for heavy workpieces – Quill adjustment by handwheel – Quill tip holder MK5 Connection voltage: 3 x 400 Volt +/-10%, 50 Hz for TN-S or TN-C networks without RCD Total connected load: 16 kVA Transistor-controlled three-phase main drive with speed monitoring If you have any questions, please feel free to contact us at any time.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 198/04, turning length: 1,500 mm, turning diameter: 500 mm, swing diameter over cross slide: 290 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,800 rpm, bed width: 360 mm, total length: 3,325 mm, total width: 1,550 mm, total height: 1,740 mm, type of input current: three-phase, overall weight: 3,800 kg, torque: 1,520 Nm, spindle diameter: 70 mm, workpiece length between centers: 1,500 mm, Well-maintained Monforts KNC 5 with extensive accessories. Can be inspected under power. Please refer to the pictures for the complete equipment. 3-jaw chuck 4-jaw chuck Faceplate Collet chuck 173 E Chip tray Hodpfx Aoyn U T Tohvjfd Coolant pump Tailstock

Condition: used, Year of construction: 2002, Technical details: turning diameter: 370 mm turning length: 200 mm Spindle 1 RPM: 4000 1/min control: Siemens 840 D Spindle 2 RPM: 4000 1/min power capacity: L / R 18/24 kW max. torque on the spindle: 630 nM C-Axis: 0,001° Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret No.2 stations / rotary tools: 12/12 VDI 40 turning speed range - milling: 3000 1/min power capacity - milling spindle: 8,8 kW torque rotary tools: 28 Nm Bar capacity spindle 1: 85 mm total power requirement: 65 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 5,7x2,4x2,1 m Travel x1: 260 mm Travel x2: 260 mm Travel Y1: 600 mm Travel y2: 600 mm Accerories Chip conveyor ls Parts and total counter Automatic separation wall Hfodpfx Ajxlrkcshved Standard set of tool holders Power Chuck 2 x 250 mm manual tool eye l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools. *

Condition: good (used), Year of construction: 1995, CNC cycle lathe MONFORTS KNC 6 year 1995 Control Monforts MTC K. Center distance : 2000 mm Max. turning diameter over bed : 630 mm Hfjdpohktd Njfx Ahved Max. revolving diameter over plane support : 380 mm Spindle speed : 2 -1800 rpm Spindle motor : 21/15 Kw spindle bore : 71 mm 3-jaw chuck FORKARDT 400mm Tool holder Multifix size C with 3 tool pockets . Space requirement : Length 4000 mm Width2200 mm Height 1900 mm Weight.ca: 5000 Kg Complete machine documentation available. Machine can be demonstrated under current.

Year of construction: 1994, condition: good (used), Spare parts for MONFORTS CNC lathes KNC 5 /1250 (Electronics of KNC 4 -KNC8 identical) 1.handwheels price. 1500,-€ Hfsdsd Nmnwspfx Ahvsd 1.all axis motors price 2000,-€ 1.plan support price 1800,-€ 1.tailstock price 1800,-€ 1.ball screw with nut Z-axis 750,-€ 1.cover ball screw Z-axis 250,-€ 1.chip conveyor for turning length 1250mm with coolant pump price 2 800,-€ 1.main headstock price 1800,-€

Year of construction: 1996, condition: ready for operation (used), Center distance: 1500mm, rotational speed: 3-2800/min, max. swing over bed/ slide: 500/ 290mm, controls: Monforts Control-System K, weight: 3.3t, with accessories, without tools. Hfodpfoip D Rhsx Ahvod

Year of construction: 2001, condition: ready for operation (used), Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air. Hedpjpy Eufofx Ahvofd