Cycle-controlled lathe

MONFORTS RNC500 AC 1500 x 300 mm

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens centre height 320 mm swing diameter over face slide 405 mm radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm turning speed range - main spindle 0 - 2.500 min/-1 transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm Djdpfxezhcfvj Akvskr spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N feed range 0 - 20 mm/-1 rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis Dksdpslz Rvlsfx Akvsr 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1995, CNC turning machine Manufacturer: MONFORTS KNC 6, Year: 1995 Control system: Monforts MTC K. Dksdpfx Ajhktd Nskver Center distance: 2000 mm Max. turning diameter over bed: 630 mm Max. turning diameter over cross slide: 380 mm Spindle speeds: 2 - 1800 rpm Spindle motor: 21/15 kW Spindle bore: 71 mm 3-jaw chuck FORKARDT 400 mm Tool holder Multifix size C with 3 tool pockets. Space requirement: Length 4000 mm, Width 2200 mm, Height 1900 mm Weight: approx. 5000 kg Complete machine documentation available. Machine can be demonstrated in operation.

Condition: used, MAZAK QT 20 Model: OT-20-N-K Turret: 8 positions Motor: 18.5 kW Year: 1988 Dsdpfx Ajwulzvokvekr Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel

Condition: excellent (used), Year of construction: 2010, chuck diameter 210 mm max. swing diameter over bed 500 mm swing diameter over slide rest 290 mm turning diameter 200 mm centre distance 700 mm turning length 500 mm travel -y axis 80 (+/-40) mm travel -x axis 190 mm travel -z axis 525 mm spindle bearing diameter 100 mm bar capacity 65 mm spindle bore 73 mm spindle turning speed range 6000 U/min turret (x-stations) 12 work piece power 4,18 kW speeds of tool 5000 U/min VDI 30 control Siermens 840D total power requirement 20 kW weight of the machine ca. 4,3 t dimensions of the machine ca. TBH 2,2 x 4,5 x 1,82 m Very well-maintained machine from a training workshop that has closed down. Power-on hours: 14,944 h. Spindle hours: 2,233 h. Includes current measurement report (available upon request) Dsdpfszhpamox Akvokr Includes Y-axis Includes C-axis Includes approx. 10 tool holders (including 2 driven units: EWS axial/radial) Includes SMW 3-jaw chuck Includes tailstock center Includes tool probe arm Includes chip conveyor Includes parts unloading arm with conveyor belt Includes coolant system Includes documentation

Condition: ready for operation (used), Year of construction: 2008, turning height: 1,200 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,800 mm, table load: 8,000 kg, overall weight: 25,000 kg, Fanuc 18iT-B, C-axis Turning, milling, and drilling capabilities 16-position tool changer Chuck: 1600 mm diameter, maximum turning diameter: 1800 mm, center height: 1200 mm Maximum chuck rotation speed: 250 rpm Maximum allowable chuck load: 8000 kg Chip conveyor Dkjdpfx Ajzh Uz Askver

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 62 mm, turning length: 1,250 mm, turning diameter over bed slide: 365 mm, center height: 280 mm, overall weight: 4,000 kg, O F F E R We can offer you, subject to prior sale and errors excepted, ex-stock and without obligation: V D F - BOEHRINGER Cycle-Controlled Universal Lathe Model DUS 560 Year of Manufacture 1998 / completely overhauled in 2008 _____ Centre height 280 mm Max. swing diameter over bed 570 mm Max. swing diameter over cross slide 365 mm Cross slide / top slide travel 345/125 mm Djdsyqw Eqepfx Akvokr Centre distance / max. turning length 1,250 mm Spindle bore 62 mm Spindle speeds, 2-step infinitely variable 3–500 / 15–2,500 rpm Infinitely variable longitudinal and facing feeds 0.01–50 mm/rev Rapid traverse longitudinal/cross 5 and 10 m/min Max. feed force facing/longitudinal 6.5 / 12.5 kN Workpiece weight max. between centers/with tailstock 400 / 1,000 kg Thread pitches 0.1 – 400 mm/pitch Spindle drive motor 15/21 kW Total drive 25 kW - 400 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: • SIEMENS 2-axis cycle control, type 805, with direct input of all turning parameters via interactive user interfaces and suitable software, controller and monitor integrated in the sliding door, with memory extension and software for free contour entry, graphics, etc. • 2 electronic handwheels for fine adjustment of carriage movement in Z and X axes, and new joystick for rapid traverse +Z/-Z and +X/-X, joystick for main spindle with stepless forward and reverse speeds • Mounted 3-jaw chuck model SCA Ø 300 mm, faceplate approx. Ø 500 mm, 4-jaw chuck Ø 315 mm, driver plate approx. 250 mm, single faceplate 500 mm, various jaws • Mounted MULTIFIX toolpost type CD with 5 different Multifix holders • Separate toolpost block for mounting CAPTO toolholder with internal coolant supply, various holders, partially with collets • Tailstock with air bearing for easy movement, work light • Mobile chip trolley with coolant pump and oil skimmer, 2 rear sliding doors • Separate electrical cabinet, adjustable spindle end stop, work light, etc. Condition: very good – guides in very good condition, machine is under power and ready for demonstration Please click here for a video of the machine: Delivery: ex stock – as inspected Payment: strictly net before delivery We look forward to receiving your order. Further lathes of all sizes in stock – please enquire.

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn Dkjdjwizltopfx Akvsr - quick change tool holder PARAT - coolant equipment - machine lamp

Condition: used, Year of construction: 2000, centre height 280 mm centre distance 1200 mm turning diameter over bed 570 mm turning diameter over slide 365 mm turning length 1000 mm spindle taper DIN 55027 Gr. 8 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 62 mm turning speed range 3 - 2500 U/min feed: 5000 mm / min rapid travel - longitudinal/face 10 m/min Dsdpex E Dn Ajfx Akvokr 3-jaw-chuck diameter 250 mm quick change toolholder SANDVIK Coromant Capto drive capacity - spindle motor 25 kW taper in tailstock-quill MK 5 dia. of quill 100 mm quill stroke 190 mm voltage 400 V weight of the machine ca. 5,0 t dimensions of the machine ca. 3,55 x 2,20 x 1,95 m - Serial No.: 2022-3742-03 - CNC-Control SIEMENS Sinumerik 810 D - Rapid feed - Coolant equipment - Machine lamp

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, table load: 25,000 kg, spindle diameter: 132 mm, spindle speed (max.): 2,500 rpm, total height: 50 mm, total length: 80 mm, total width: 50 mm, table length: 2,000 mm, table width: 1,750 mm, feed length W-axis: 10,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, rotational speed (max.): 2 rpm, travel distance W-axis: 800 mm, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, workpiece weight (max.): 25,000 kg, power: 37 kW (50.31 HP), REM CPAF 132 | CNC Table Boring & Milling Machine | Fanuc 31i-A Fully functional CNC horizontal boring mill — manufactured by REM Bacau (2016), revised and updated in 2022. Running under power and available for immediate inspection. MILLING & BORING HEAD: • Boring Spindle Diameter: 132 mm • Spindle Taper: ISO 50 Dkodsrwx U Iopfx Akvor • Speed Ranges: 2 • Spindle Speed: 0–2,500 rpm • Tool Clamping: Automatic • Main Motor Power (S1): 37 kW ROTARY TABLE: • Dimensions: 1,750 × 2,000 mm • Indexing: 360,000 × 0.001° • Indexing Accuracy: 6 arc seconds • Max. Hydrostatic Load: 25,000 kg AXIS TRAVELS: • X (Cross Slide): 2,500 mm • Y (Headstock): 1,600 mm • Z (Spindle): 800 mm • W (Column Back/Forth): 1,100 mm FEEDS: • X/Y/Z Work Feed: 2–10,000 mm/min • W Work Feed: 2–6,000 mm/min • B-Axis Feed: 0.025–3 rpm • Lead Screws: Ball-screw on all linear axes CNC CONTROL: Fanuc 31i-A Note: Requires new X-axis telescopic covers (priced accordingly). Machine is running under power — inspection welcomed anytime. Manufactured by REM Bacau – Romania. Export worldwide. Contact us for full specs and pricing.