Used Mk2 for sale (202)

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Bjdpfx Amoh N Sd Uerewu Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Table size: 1120 x 280 mm T-slots in table: 3 x 16 mm Table longitudinal travel: 600 mm Table transverse travel: 250 mm Vertical travel: 360 mm Spindle rotation: +/-45° Distance between table surface and spindle face: 230–630 mm Maximum spindle speed (vertical): 108–2400 rpm Maximum spindle speed (horizontal): 90–2000 rpm Spindle taper: ISO 40 Spindle stroke: 120 mm Power: 2.2/2.2 kW (vertical/horizontal spindle) Dimensions: 1700 x 1450 x 2245 mm (W x D x H) Weight: approx. 1350 kg Accessories, features: - 3-axis SINO digital read our system - spindle feedrate in three steps - 200 mm machine vice - 45° tiltable spindle head - Rotating console - Rotating machine table - 2 x reducers (ISO40/MK3, ISO40/MK2) - Drill head with collet, diameter 3 – 16 mm Bsdsybb T Hepfx Amrewu - 2 horizontal milling spindles - 1 x 15-piece chuck set, diameter 2 – 20 mm - Clamping set - Work light - Cooling water system

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an almost-new Drechselmeister STRATOS XL woodturning lathe with a 3 HP motor! The demonstration machine is in original condition, meaning you receive the full warranty. Technical Specifications - Center height: 280 mm - Swing over bed: 550 mm (expandable up to 1,000 mm with optional extension bed and outboard turning attachment) - Distance between centers: approx. 780 mm (expandable!) - Spindle thread: M33 x 3.5 with ASR (European) safety groove - Spindle and tailstock Morse taper: MK2 - Inverter drive (3 belt speeds): - Speed 1: 60 – 1,200 rpm - Speed 2: 100 – 2,200 rpm - Speed 3: 150 – 3,700 rpm - Tailstock quill travel: 150 mm (with scale) Bwjdpstpplnofx Amreu - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor: 3 HP - Weight: approx. 320 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping via freight carrier: Austria: € 125.00 incl. VAT Germany: € 150.00 incl. VAT South Tyrol: € 180.00 incl. VAT If you are interested in this machine, please provide your complete address via the contact form so that we can process your inquiry professionally. Thank you, your NEUREITER Team Related Keywords: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, woodturning tools, turning, machine Reference: R-A0117

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Bjdpfxsv A S Efj Amrjwu Features: Two-way digital ACU-RIDE display *

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new TEKNATOOL Nova Nebula 230 DVR wood lathe with a direct drive offering speeds from 50 to 4,000 rpm. The demonstration machine is in original condition, so you receive the full warranty. Technical specifications: - Center height: approx. 230 mm - Distance between centers: max. 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) anti-rotation groove - Spindle and tailstock taper: MK2 - Variable speed control (direct drive): 50 – 4,000 rpm - 24-position indexing Bodpfx Ajtpph Ssmrewu - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with graduated scale and trapezoidal thread) - Machine weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping by freight forwarder: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: wood lathe, lathe, turning machine, turning bench, turning, turning tools, woodturning, machine Reference: R-A0117

Condition: used, functionality: fully functional, Tool holders for HAAS VF machines 80 pieces, size BT40, including HAAS draw bolts - 6x collet chucks OZ, clamping range Ø2-Ø16 - 3x collet chucks OZ, clamping range Ø2-Ø25 - 1x collet chuck ER32 - 3x shrink fit chucks Ø6 - 1x shrink fit chuck Ø8 - 2x shrink fit chucks Ø10 - 2x shrink fit chucks Ø12 - 1x hydraulic rotary chuck Ø20 - 1x short boring chuck Ø13 Röhm Bedpfx Amszi Ebijrowu - 4x Weldon Ø6 - 8x Weldon Ø8 - 11x Weldon Ø10 - 10x Weldon Ø12 - 1x Weldon Ø14 - 5x Weldon Ø16 - 5x Weldon Ø20 - 2x MK1 tool holder - 1x MK2 tool holder - 1x MK3 tool holder - 2x milling cutter holder Ø16 - 1x long milling cutter holder Ø16 - 1x extra long milling cutter holder Ø22 - 2x long Weldon Ø6 - 2x long Weldon Ø8 - 2x long Weldon Ø10 - 1x extra long Weldon Ø8 - 1x extra long Weldon Ø10

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Misc. Accessories Marcels Maschinen AG Bwsdpfx Ameq Dlznerou

Condition: used, mileage: 3,000 km, power: 110 kW (149.56 HP), color: white, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly ask you to schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Bjdpfxjzcknie Amrewu A50 Front axle with increased load capacity, AR2 Axle ratio i = 3.923, BA3 Active Brake Assist, C6L Multifunction steering wheel, CB7 Stabilization Level I, CL1 Steering wheel adjustable in inclination and height, CW2 Deletion of vehicle lowering function, D03 High roof, D50 Continuous partition, E07 Hill-start assist, E1D Digital radio (DAB), E1U USB socket 5 V, E4S Smartphone integration package, E57 Electrical system for trailer socket, E7B Navigation preparation, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, ES0 Jump start assistance, ES5 Charging package, dashboard, EY6 Breakdown management, F1K Coat hooks in the cab, F3F Co-driver-optimized gear selector console, F64 Exterior mirrors, electrically foldable, F68 Exterior mirrors, heated and electrically adjustable, F907 MODEL SERIES 907 VAN VS30, FF5 Storage compartment above the windshield, FJ4 Storage compartment under the cockpit, FKA BOX VAN, FR8 Rear view camera, FZ5 Anti-theft and intrusion alarm system, GD8 6-speed manual transmission ECO Gear 360, H12 Warm water auxiliary heating, H21 Heat-reflecting glass with band filter on the windshield, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IL5 Left-hand drive, IR4 Wheelbase 3665 mm, IT4 3.5-tonne vehicle, J10 Speedometer km/h, J52 Engine oil level indicator on cold start, J55 Seatbelt warning system for co-driver's seat, J58 Seatbelt warning system for driver's seat, J65 Outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JB4 Active Lane Keeping Assist, JF1 Rain sensor, JG0 Shift point indicator, JH3 Communication module (LTE) for digital services, JI7 Start-up mileage, maintenance interval 60,000 km, JK5 Instrument cluster with color display, JS2 Intelligent Speed Assist, JT7 Cornering Assist, JW8 ATTENTION ASSIST, KB7 Main tank 93 liters, L LEFT-HAND DRIVE, L13 Fog lights with cornering lights, L65 Ceiling light(s) in LD/FG area with door contact, L94 Deletion of parking light, LA2 Driving lights assistant, LB1 Lateral marker lights, LB5 3rd brake light, LC4 Comfort roof control unit, LE1 Adaptive brake light, LX5 Europe, M60 Generator 14 V / 250 A, M72 Vehicle HVO capable, MJ8 ECO Start/Stop function, MK2 Speed limiter 130 km/h, MS1 Cruise control, MT5 EMISSION CLASS EURO 6e RDE5 N1, MU3 OM 654 DE 20 LA 110 kW (150 hp) 3800/min, P47 Mud flaps front, P48 Mud flaps rear, Q11 Longitudinal member reinforcement, Q67 Towing eye rear, R65 Spare wheel holder under frame end, R87 Spare wheel, RF8 Tire brand Michelin (80), RH2 Tires 235/65 R16 C, RM7 Summer tires, RM9 Tire brand, customer's choice, RS3 Steel wheels 6.5 J x 16, RY2 Tire pressure monitoring system on front and rear axles, wireless, S02 Driver's seat, S22 Armrest for driver's seat, S23 Co-driver's seat, two-seater, SA5 Airbag driver, SA6 Airbag co-driver, SK2 Seat occupancy recognition driver's seat, T16 Sliding door, right, T75 Grab handles for driver and co-driver entry, T77 Grab handle at loading compartment sliding door, partition, T86 Entry handle on rear corner pillar, right, V94 Cable duct on side wall, V95 Cable duct on rear portal, VF7 Fabric Maturin black, W73 Running board, rear door We would be happy to provide you with an offer for the trade-in of your used vehicle. Should you wish to lease or finance your vehicle, we will gladly provide you with an individual of

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister TWISTER XL woodturning lathe with a center distance of 800 mm. The demonstration machine is in its original condition, so you receive full warranty. Technical data - Center height: 250 mm - Swing over bed: 490 mm (up to 900 mm with optional outboard turning device!) - Center distance approx. 800 mm (extendable!) - Spindle fitting M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Frequency inverter (2 belt speeds): - 60 – 1,350 rpm and 150 – 3,600 rpm - Quill travel 150 mm (with scale), trapezoidal-thread leadscrew - Motor: 2 HP - Weight: approx. 290 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping via freight forwarder: Austria: € 125 incl. VAT Germany: € 150 incl. VAT South Tyrol: € 180 incl. VAT Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, woodturning tools, wood spinning, turning, machine Bjdpstpxx Iefx Amrowu Reference: R-A0117

Condition: used, Year of construction: 1998, Technical details: bore capacity in steel (diameter): 15 mm bore stroke: 100 mm threading: M16 number of drilling stations: 3 drill spindle - Morse Taper: 3x MK2 spindle throat: 220 mm spindle distance: 335 mm headstock adjustment: (vertikal) 290 manuell mm feed:: mauell mm/U spindle speed:: 220-1600 / 400-3200 / 800-6400 U/min distance between table/spindle: min./max.: 235/525 mm table surface area: 1270 x 315 mm table adjustment: fest / fix mm total power requirement: nicht bekannt kW weight of the machine ca.: 0,72 t dimension machine xH: 1,4 x 0,8 x 2,25 m incl. cooling water system operation by hand and foot The drilling spindles are equipped as follows: 1x drill chuck 13mm 2x quick chuck 10mm Bjdpju Idutefx Amrjwu *

Condition: ready for operation (used), Year of construction: 1975, Column drill press Manufacturer: CORDIA, Type: S-18, Year of manufacture: approx. 1975 Drilling capacity in steel: max. 18 mm Spindle mount: MK2 Spindle speeds: 90 - 1450 rpm Spindle stroke: 120 mm Table: 350 mm x 400 mm clamping surface; 270 mm x 320 mm Space required: Width 420 mm, Depth 650 mm, Height: 2000 mm Bwjdehtri Eopfx Amrsu Weight: approx. 350 kg Machine is ready for use.

Condition: good (used), loading space length: 8,700 mm, loading space width: 1,620 mm, loading space height: 2,100 mm, Year of construction: 1993, General information Field of application: Construction Drivetrain Type of fuel: Hybrid Weights Bwodpjzy I U Hefx Amreu Empty weight: 2.450 kg Functional Lifting capacity: 200 kg Lift height: 2.300 cm Working height: 2.500 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 1140 m Max swing of arm in degrees: 90 Max swing of platform in degrees: 999 Latest inspection: 2026-09-20 Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: ready for operation (used), Year of construction: 2000, A fully automatic 4-axis Hundegger joinery machine is available. Material: structural timber, standard material: softwood, min. timber cross section X/Y: 20mm/50mm, max. timber cross section X/Y: 300mm/560mm, min. timber length in automatic operation: 300mm, max. feed rate: 25m/min, max. hydraulic pressure: 100bar. Saw blade diameter: 735mm, kerf: 6mm, saw blade thickness: 4.4mm, bore: 30mm. Cylindrical cutter diameter: 350mm, cylindrical cutter width: 120mm, cylindrical cutter inner diameter: 55mm. Machine dimensions X/Y/Z: approx. 12000mm/2400mm/2550mm, weight: approx. 13t, control system: Siemens Pentium 400 with Hundegger EKP. Documentation available. An on-site inspection is possible. Bodpfjzpyxcex Amrewu

Condition: excellent (used), For sale is a Drechselmeister MIDI 2 Plus woodturning lathe with a centre distance of approx. 400 mm. The used machine is in very good condition. Technical specifications: - Centre height: approx. 178 mm / max. turning diameter 355 mm - Centre distance: approx. 400 mm (extendable with bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle mount: M33 x 3.5 (Morse taper MK2) with ASR (Euro) safety groove - Tailstock with 100 mm MK2 interchangeable quill - Trapezoidal thread and measuring scale - Motor: 0.7 kW / 1 HP (230 V) with high-quality frequency converter - Weight: approx. 53 kg The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: woodturning lathe, lathe, metalworking lathe, wood lathe, woodturning, turning tools, wood turning, machining, machine Bwjdpfx Asy E Il Ejmrou Reference: R-M61TS

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 Bwsdpfjrv Au Rsx Amrou -Type: A2 MK2 -Bore: Ø 12 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Bwsdpfxsnzt A Hj Amrju Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister STRATOS ECO woodturning lathe with a center distance of 680 mm. The demonstration machine is in original condition, therefore you receive the full warranty. Technical Data - Center height approx. 230 mm - Machining diameter approx. 455 mm (with optional outboard turning attachment up to 800 mm!) - Center distance approx. 680 mm (extendable!) - Spindle mount M33 x 3.5 with ASR (Euro) anti-release groove* Bsdpfx Aetpxt Rjmrjwu - Spindle and tailstock taper: MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (connection: 230 V) - Weight: 177 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipment rates: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Related terms: woodturning lathe, lathe, turning bench, woodturning bench, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Condition: good (used), thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus Bwsdpfxjvvt U Ij Amreu -Manufacturer: Lenze ABW, thread cutting chuck MK2 -Type: GB2a -Dimensions: Ø 62 x 207 mm -Weight: 1.2 kg

Condition: as good as new (ex-display), SHOWROOM MACHINE For sale is an as-new Drechselmeister Stratos FU 230 LV (long version) wood lathe, with a center distance of approx. 1,000 mm / 1 meter. The showroom machine is in original condition, thus you receive the full warranty. Technical Data - Center height: 230 mm - Turning diameter: 455 mm (up to 800 mm with optional outboard turning device!) - Center distance: approx. 955 mm in the SPECIAL MODEL STRATOS FU-230 LV (further extendable with optional bed extension!) - Spindle thread: M33 x 3.5 (hardened) with ASR (Euro) safety groove* Bwsdpfx Aotpxw Asmrou - Headstock and tailstock taper: MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 1.5 kW / 2 HP (230 V connection) - Weight SPECIAL MODEL LV: 195 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so that we can process your enquiry professionally! Thank you, your NEUREITER team Related terms: wood lathe, lathe, turning machine, woodturning, turning, turning tools, woodturning, machine Reference: R-A0117

Condition: good (used), loading space length: 7,250 mm, loading space width: 1,800 mm, loading space height: 2,100 mm, color: red, Year of construction: 1997, General information Field of application: Construction Drivetrain Type of fuel: Hybrid Bedpfx Ajzymhfsmrewu Weights Empty weight: 1.980 kg Functional Lifting capacity: 200 kg Lift height: 1.400 cm Working height: 1.600 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 1100 m Max swing of arm in degrees: 90 Max swing of platform in degrees: 999 Latest inspection: 2026-09-02 Production country: DK Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: good (used), Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST Bwodpfxemzkg Rj Amrju -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, load capacity: 200 kg, empty load weight: 3,240 kg, construction height: 1,980 mm, fuel type: electric, total length: 3,970 mm, drive type: Elektro, arm reach: 6,400 mm, construction width: 1,490 mm, working height: 12,100 mm, Articulated telescopic platform Condition: New machine Technical condition: New Front tires type: Non Marking Front tires Size: 23x10.50-360 Front tires Condition: New Rear tires Size: 23x10.50-360 Bedpfxou Ty E Ne Amrjwu Rear tires Condition: New Description: Aerial work platform classification 3B, integrated charger

Condition: good (used), quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert -Quick-change chuck holders: 18 pieces, without: arbor -2x sleeve: MK1 Bwsdpfswa Invsx Amrou -7x sleeve: MK2 -6x sleeve: MK3 -3x sleeve: MK4 -Mounting: Ø 42 mm -Price/Delivery: complete -Transport dimensions: 300/200/H170 mm -Complete weight: 21 kg

Condition: as good as new (ex-display), SHOWROOM MACHINE For sale is an as-new Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. Bwedotpnawopfx Amrou This showroom machine is in its original condition, so you receive the full warranty. Technical specifications: - Center height: 200 mm - Swing over bed: 395 mm (up to 700 mm with optional outboard turning attachment) - Center distance: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed range (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (with trapezoidal thread), prepared for ER-25 drilling quill - Motor: 1.5 kW / 2 HP (230 V connection) - 2-stage brake switch - Weight, bench model: 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can handle your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Condition: like new (used), DEMONSTRATION MACHINE For sale: MIDI2 Plus lathe demonstration machine with a center height of 178 mm, including PRO DDMIDI-105 machine stand! The lathe has only been used briefly for demonstration purposes at Hödnerhof. Therefore, it is considered as new and comes with full warranty / guarantee. Technical Specifications: - Center height approx. 178 mm / turning diameter 355 mm - Distance between centers approx. 400 mm (expandable with optional bed extensions) - Speed ranges: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) anti-rotation safety groove* - Tailstock with interchangeable quill, 100 mm MK2, trapezoidal thread and measuring scale! (Optional: Interchangeable quill with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in Kuchl, A-5431. Subject to prior sale! (No shipping possible) Bsdpfxeu Szlzs Amrewu Related terms: wood lathe, turning machine, lathe, woodturning, wood turning tools, woodturning, machine Reference: DDMIDI2-PLUS-VH