Used Mitre Saw for sale (6,572)

Condition: like new (used), electronic adjustment of blade tilt 90° – 45° maximum cutting width: 650 mm electronic adjustment of saw height automatic material feed touch control panel laser rotating work table 0° – 345° maximum blade diameter: 800 mm motor power: 16.6 kW Dkedpoxfr Etefx Afzsu year of manufacture: 2016 CE marked 400 V

Condition: not inspected (used), Double mitre saw Manufacturer: Pertici, Model: Univer 502D2, Year of manufacture: unknown, Saw blade diameter 500 mm, pneumatic clamping, extraction connection, digital display, cutting length 360 mm to 6,000 mm, cutting width 150 mm, saw blades tiltable 90/45 degrees, automatic feed, material feed 4,000 mm Dodpfxsxfi U Se Afzeku

Condition: used, Horizontal Mitre Band Saw in Swivel Bow Design JAESPA Type W 320 G Serial No. 18793 / 99 Year of Manufacture: 1999 Cutting Capacity at 90° (Round): Ø 320 mm Cutting Capacity at 90° (Square): 320 x 320 mm Cutting Capacity at 90° (Flat): 460 x 200 mm Cutting Capacity at 45° (Round): Ø 290 mm Cutting Capacity at 45° (Flat): 290 x 220 mm Cutting Capacity at 45° (Square): 240 x 240 mm Cutting Capacity at 30° (Round): Ø 200 mm Cutting Capacity at 30° (Square): 200 x 200 mm Dksdpewwaz Asfx Afzsu Cutting Capacity at 30° (Flat): 220 x 200 mm Saw Blade Dimensions: 4120 x 27 x 0.9 mm Blade Speed: approx. 50 m/min Material Feed Height: approx. 630 mm Saw Motor Power: 1.5 kW Connection: 400 Volt, 50 Hz - Quick mitre adjustment via pivoting saw bow with rotary table and clamping - Infinitely variable mitre cuts from 30° - 90° - Hydraulic saw bow movement with rapid approach and return stroke after cutting - Material height detection via limit switch - Quick-adjust vice with eccentric clamping - Coolant system integrated in machine base - Emergency stop mushroom push button Required space (L x W x H): 2000 x 1150 x 1800 mm Weight: 975 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 110693, Offer 20507 Technical data: - Saw blade dimensions 350 x 3.2 x 40 mm - Saw blade speed 3200 rpm - Cutting range at 90° 115 mm - 115 x 120 mm - 200 x 80 mm - Miter adjustable left + right Djdperkmkcofx Afzjku - Drive 400 V / 2.0 kW - Pneumatic connection 6 bar - Space requirement approx. W 700 x H 1500 x D 900 mm - Machine weight approx. 80 kg - with: - Saw blade - clamping vice - Micro-spray lubricant device - Stop rail 3000 mm

Condition: new, Machine in stock and immediately available Double Mitre Metal Band Saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in commercial applications - Generously sized, cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast, easy clamping of workpieces - Precise, adjustable saw blade guide for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade Dkedpsd R Sipjfx Afzsu - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Quick-release vice - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic end stop - Base frame

Condition: good (used), Year of construction: 2003, functionality: fully functional, Specifications: Cutting speed, infinitely variable: 20 - 90 m/min Djdjxbrq Uspfx Afzoku Saw band: 3850 x 27 x 0.9 mm Cutting range: rectangular 90°: 360 x 305 mm rectangular 45°: 265 x 300 mm rectangular 30°: 175 x 300 mm

Condition: excellent (used), Sprossen punching machine 12 mm Used, in top condition Manufacturer: Schleicher Sprossen knife 12 mm Right extension table with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free, unpacked Dkodpfxsw Hlzts Afzou Handover in as-inspected condition, without guarantee or warranty

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: Dedpfxeu Nigkj Afzsku - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Horiz. Mitre bandsaw KNUTH with minimum quantity lubrication type HB 250A Bandsaw for metalworking with swivel saw frame. Serial no. 201603004 Year of manufacture 2016 Sawing range at 90° round Ø 225 mm Sawing range for 90° square 190 x 190 mm Sawing range for 90° rectangle 245 x 150 mm Sawing area at 45° round Ø 145 mm Sawing area for 45° square 145 x 145 mm Sawing area for 45° rectangle 200 x 145 mm Sawing area at 60° round 90 mm Sawing area at 60° square 90 x 90 mm Sawing area for 60° rectangle 110 x 70 mm Saw band 2480 x 27 x 0.9 mm Roller diameter 290 mm Belt speed 45 / 90 m/min. Compressed air requirement approx. 5 bar (minimum quantity lubrication) Working height 910 mm Motor power 1.1 kW Connected load 400 Volt, 50 Hz - Saw blade speed via 2-stage electric motor Dkodpfx Asrvm Npjfzsu - Infinitely variable lowering via hydraulic lowering cylinder - Automatic limit stop after material average - Infinitely variable swivel saw arm for mitre cuts up to 60° - Pressure gauge for band tension - Vice with short-stroke quick clamping device - Coolant device with electric pump - Minimum quantity lubrication UNI-Microspray I (year of manufacture 2017) - Workpiece stop Space requirement L x W x H 1450 x 700 x 1450 mm Weight 185 kg Very good condition

Condition: good (used), Year of construction: 2010, machine/vehicle number: F3554, Offer 25228 Hydraulic Horizontal – Two-column Guided Mitre Band Saw Machine Technical Data: - Automatic operation cycle for cutting process, hydraulic lifting/lowering of the saw frame, hydraulic automatic material feed - Saw blade dimensions: 4400 x 34 x 0.9 mm - Infinitely variable cutting speed: 15 – 88 m/min - Infinitely variable cutting pressure adjustment: 10 – 15 bar - Lowering speed: 0 – 300 m/min - Cutting range 90°: - Round at 90°: 360 mm - Square-flat: 360 x 430 mm - Hydraulic material clamping Dkedswvrviepfx Afzeu - Hydraulic automatic material feed - Coolant system - Drive: 400 V / 3 kW - Space requirement approx.: W 2200 x H 1850 x D 1300 mm - Weight approx.: 1100 kg - Roller table: 2000 mm

Condition: used, machine/vehicle number: 8354, disk of circular saw-Ø: 350 mm Dedpeby Hikofx Afzoku cutting area at 90° round: 90 mm cutting area at 90° square: 160 x 70 mm cutting area in mitre at 45° square: 120 x 60 / 60 x 80 mm cutting speed: 30 m/min engine: 1,1 kW space needed: 1000 x 1250 x 1380 mm

Condition: excellent (used), Hoffmann MS35-SF/S07.117 Double Mitre Saw 45° angled cuts Saw motors: 4×2.2 kW Saw blade speed: 3,000 rpm Blade size: 350 mm, bore 30 mm Max working width: 80 mm Max working height: 80 mm Dovetail milling units: 2×0.5 kW Milling speed: 19,000 rpm Possibility to set two milling positions Working pressure: 6 bar CE certificate Dkjdpfsw T R T Tex Afzou DTR documentation Weight approx. 800 kg Total machine dimensions with tables: 658×92×170 cm (H)

Condition: ready for operation (used), functionality: fully functional, Crosscut Saw / Mitre Saw / Crown Moulding Saw Manufacturer: Hüllhorst Model: KLS Swiveling crosscut saw, previously used for profile strips and crown mouldings. Maximum infeed length: approx. 4,000 mm Outfeed table length: 3,000 mm Maximum cutting cross-section: approx. 160 x 110 mm (W x H) Infinitely adjustable swiveling range, +/-45 degrees Saw motor: 4.4 kW Speed: 120 – 4,200 rpm Maximum positioning speed: approx. 60 m/min Dkedoxbnqdspfx Afzou 2 x 80 mm extraction ports Control: Ferrocontrol Cutting accuracy: +/- 0.1 mm Dimensions: approx. 9,000 x 1,300 x 1,500 mm (L x W x H) Machine fully checked and cleaned. Among other things, a frequency inverter and a control unit have been replaced.

Condition: used, Year of construction: 1993, Technical details: Dodpfx Aewz Hygsfzsku cutting diameter: 195 x 120 mm cutting range min.: 135 x 120 mm saw blade diameter: 380 mm cutting length min.: 500 mm cutting lenght max.: 6000 mm max. spindle speeds: 2800 U/min total power requirement: 3 kW weight of the machine ca.: 850 kg

Condition: excellent (used), Year of construction: 1995, Machine in continuous operation (aluminium window production) HAFFNER DGS 187: Cutting width: 375 mm Dsdpfxexa Alms Afzjku Cutting height: 150 mm Saw blade dimensions: 500 × 30 mm Motor output: 2 × 3 kW Cutting length: 5,100 mm Speed: 2,800 rpm Air pressure: 6 bar Machine weight: approx. 700 kg Overall dimensions: approx. 6,100 × 1,450 × 1,450 mm

Year of construction: 2006, condition: ready for operation (used), Smallest cutting length at 90°: 350mm, smallest cutting length at 45° inclined: 350mm, swiveling range inward: 90-45° (down to 22.5° manually with digital display), tilting range inward pneumatically: 90-45°, saw blade diameter: 420mm, saw blade speed: 2800/min, electrical connection: 230/400, power output per motor: 4kW, compressed air connection: 7bar, air consumption per working cycle: 40l without spraying, 64l with spraying, length: 4380mm, width: 2871mm, height: 1985mm. With complete documentation, without accessories. An on-site inspection is possible, but not under power. The machine is already dismantled and ready for loading. No defects known, was regularly maintained by the manufacturer. Dodpfx Afjw Tc Shszjku

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm disk of circular saw-Ø: je nach Bedarf 420 - 500 mm Dedpfxjz E Snj Afzoku space needed: 6400 x 1400 x 1700 mm weight: ca. 1600 kg

Condition: like new (used), Year of construction: 2016, operating hours: 22 h, functionality: fully functional, saw blade diameter: 500 mm, Elumatec Double Mitre Saw DG 142 with E580/1 Control – Precision Saw for Aluminium and PVC Profiles For sale is a high-quality Elumatec DG 142 double mitre saw equipped with electronic control system E580/1. This machine is ideal for the precise cutting of aluminium, PVC, and light metal profiles – particularly suited for window, door, and façade construction. Technical specifications: Manufacturer: Elumatec Model: DG 142 Control: E580/1 (automatic positioning and angle adjustment) Mitre cuts: 45° – 90° (automatically adjustable) Cutting length: up to approx. 5,000 mm (depending on configuration) Blade diameter: approx. 500 mm Speed: approx. 2,800 rpm Connection: 400 V / three-phase Condition: used, technically flawless Availability: immediate +++ Operating hours: 22 HRS +++ Special features: - Automatic positioning of both saw units Dedpew D Rv Dofx Afzjku - Precise and clean cuts thanks to stable machine guidance - Programmable control for highly repeatable series cuts - Excellent cutting quality, also on demanding profiles - Ideal for metal fabrication, window production, and conservatory construction The machine is network-capable incl. extraction unit + SICK light curtain

Year of construction: 2000, condition: good (used), Power: 5.5 kW Djdpow S Nycsfx Afzeku Weight: 2,200 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 500 mm, air pressure: 6 bar, Emmegi Classic Magic 500 5 Meter Year built: 2019, as new condition - LCD display with backlighting - Pre-installed interface for industrial label printer connection - USB port - Capability for single cuts - Storage for 99 profile correction values and automatic calculation of cutting lengths for miter cuts - Storage for 20 cut lists entered via the keyboard (up to 50 sets each) - Storage for 10 cut lists imported via RS232 serial interface from an external PC (up to 100 sets each) Dedpfx Afew Svxlezsku MACHINE FEATURES - Position detection of the movable unit via direct measuring system with magnetic tape - 2 carbide-tipped saw blades, diameter 500mm - Pneumatically operated full safety covers over the cutting area - 2 pneumatic horizontal clamping units with low-pressure safety device - Profile support roller conveyor - Lubrication system: mist spray or minimum quantity pulse spray system (depending on version) - Cuts with saw blades Ø 500 mm in the miter range from 22°30’ (external) to 90° - Manual profile support - Pre-installed interface for automatic activation of MG4 chip extraction unit - Two standard profile inserts - Metric scale - Label printer incl. label peel-off function - Overlength cut - Shortcut - Cross cut - Macro - Automatic cut - Pro software package

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, cutting length (max.): 4,500 mm, Saw blade diameter: 420 mm Max. cutting length: 4500 mm Min. cutting length: 335 mm Automatic length positioning, control with Windows and USB connection Accompanying roller conveyor Weight: approx. 1800 kg Dkodpfxjw Tua Re Afzou

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Dksdjd N H A Nopfx Afzou Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Dedpfjquzd Rjx Afzsku Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) Dedpfx Afodzp Snjzsku - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: used, Mitre Cutting Saw System for Steel Construction Column-Guided Mitre Bandsaw Semi-Automatic PEHAKA Type HS 620 / 1000 GBS Machine No. 39093 Year of manufacture: 1995 / Electrically overhauled in 2011 Cutting range round at 45-90° Ø 650 mm Cutting range flat at 90° 1010 x 650 mm Cutting range flat at 75° left 950 x 650 mm Cutting range flat at 60° left 830 x 650 mm Cutting range flat at 45° left 650 x 650 mm Cutting range flat at 30° left 410 x 650 mm Cutting range flat at 75° right 950 x 650 mm Cutting range flat at 60° right 830 x 650 mm Cutting range flat at 45° right 650 x 650 mm Saw blade dimensions 10480 x 54 x 1.6 mm Saw blade speed 14-160 m/min, stepless Minimum remnant length / clamping length 80 mm Vise clamping range 0-1010 mm Material infeed height 840 mm Hydraulic drive power approx. 2.2 kW Saw motor drive power 5.5 and 7.8 kW (pole-switchable) Mains connection 400 Volt, 50 Hz, approx. 15 kW - CNC control SIEMENS S7 with touch panel, electrically overhauled in 2011 - Saw blade speed via 2-stage drive motor and stepless speed adjustment - Fully hydraulic bandsaw in twin-column design - Hydraulic lowering of saw frame with stepless cutting pressure adjustment - Lowering speed infinitely adjustable - Mitre adjustment via motor-driven swiveling saw unit, setpoint angle input via control system and actual value digital display - Working height sensor for increased lowering speed before saw engagement - Hydraulic double vise clamping - Hydraulic unit mounted to saw frame - Motor-driven saw blade cleaning brush Ø 80 mm - Powered material feed rollers on infeed and outfeed sides with geared motor - Coolant system with coolant pump for water-emulsion (not used) - Minimum quantity lubrication for the saw blade - Chip conveyor with motor drive integrated in machine bed - Controlled length stop up to 9000 mm with motorized swivel-up material stop Stop overall length approx. 9700 mm, stop travel path 9000 mm - Infeed roller conveyor with powered rollers, 15.5 meters, roller width 1000 mm, total width 1500 mm 20 rollers Ø 90 mm, rollers powered by geared motor, construction height 840 mm, load capacity 400 kg/m - Outfeed roller conveyor 10 meters, roller width 1000 mm, 15 rollers Ø 90 mm, construction height 840 mm, with cross conveyor Space requirement for saw system (L x W) approx. 27 x 6 meters Transport space requirements for saw unit (L x W x H) approx. 560 x 300 x 330 cm Weight of saw unit approx. 9 tons Transport space for infeed roller conveyor: length 13.5 meters x width 3 meters x height 140 cm Weight of infeed roller conveyor approx. 8 tons (transported in one piece with 2x support beams for stabilization) Dedpfjtt Uffox Afzoku Transport space for stop roller conveyor: length 10.5 meters x width 3 meters x height 200 cm (6 cross conveyors are separated at 3-meter width) Weight of stop roller conveyor approx. 8 tons (transported in one piece with 2x support beams for stabilization) Good condition