Used Miniature Force Sensor for sale (10,932)

Condition: used, Fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, universal reflex sensor, reflex sensor -Manufacturer: Wenglor, fiber optic cable sensor unused in original packaging -Type: UF87PA3 -Number: 3x sensors available -Price per piece -Dimension box: 105/90 / H40 mm -Weight: 0.2 kg / pc. Bdsdpfx Amsg Sxy Deyof

Condition: used, Differential pressure sensor -Type: QBM66.203 -for air and non-aggressive gases -output signal proportional to the pressure difference Technical specifications: -Output signal: 0...10 V DC Bdodob Hw Dpjpfx Amyjf -2 measuring ranges: 0...1500 Pa or -0..3000 Pa -Operating voltage: 24 V AC or -13.5...33 V DC -Power consumption: 0.5 VA -Connection: 3-wire -Protection class: IP42 -Weight 0.2 kg

Condition: used, Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -Distributor: 8-way -M12: x 1 screw connections -Weight: 90 g Bdsdpfx Amsdntfgoyof

Condition: used, Inductive sensor, electronics sensor Bdedpfx Asdntfmjmyof -Manufacturer: IFM -Type: IF5227 IFB3002-BPKG/MS -Connector: M12 x 1 -Switching distance: 2 mm -Number: 2x available -Price: per piece -Weight: 10 g

Condition: used, Duct sensor for rel. Humidity/temp. 2 x 0...10 V -Type: QFM3160 for duct installation with mounting flange. -Technical specifications: Bdedpfob H Ebgjx Amysf -Measuring element temperature: active -Measuring element humidity: capacitive humidity sensor -Operating voltage: 24 VAC 13.5...35 VDC -Power consumption:

Condition: used, Sensor, probe, immersion probe Bedpfx Aed Tqkhjmyodf -Type: C2S-4/5 -Housing made of: Teflon (PTFE) -Protection class: IP66 -Cable length: 900 mm -Weight: 110 g

Condition: used, Sensor-actuator distributor, distributor strip Bodpfxed Tqkqs Amysdf -Type: SAI-8-MMS 4P M12 -8-way: distributor -Weight: 800 g

Condition: used, Inductive sensor, electronics sensor -M50 x 1.5 -Type: IN 50 60 40 Bdedod Tvudspfx Amysf -Number: 2x available -Price: per piece -Weight: 300 g

Condition: used, Inductive sensor, electronic sensor, position encoder, displacement sensor -Manufacturer: MTS Temposonics, position encoder -Type: TTM-RB-M-1000-R Bdjdpsf E Rqcjfx Amyef -Measuring length: 1000 mm -Dimensions: 1200/53/H46 mm -Weight: 0.8 kg

Condition: used, machine/vehicle number: 0901666, Force measuring device, force measuring device, calibration, force measuring technology, load cell Bodecdcn Hjpfx Amyjdf -Manufacturer: Johann Rein -Type: 1Mp -Dimensions: 190/290/H130 mm -Weight: 4.5 kg

Condition: new, 9 Jensen sensors Bsdpfxsy Ukgwe Amyjdf OPR 2 ND 99812

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, overall weight: 120,000 kg, total height: 5,600 mm, pressing force: 1,250 t, air pressure: 6 bar, distance between side stands: 1,200 mm, distance between stands: 1,400 mm, stroke length: 500 mm, table length: 1,850 mm, table width: 1,600 mm, Straight-sided eccentric press ERFURT type PKZe 1250 Bdedpfx Asubyrxsmyof Superb working condition, after full, professional overhaul. After - newer used. Specification: Capacity: 1250 ton force Slide stroke: 500 mm Slide adjustment: 215 mm Maximum shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW at 1478 RPM Ram adjusting motor rate: 7.5 kW at 1450 RPM Number of single strokes: 8 min-1 Cushion capacity: 200 ton force Cushion stroke: 200 mm Height above floor: 7900 mm Press weight: 130 000 kg.

Condition: used, Year of construction: 1967, functionality: fully functional, overall weight: 120,000 kg, total height: 5,600 mm, pressing force: 315 t, air pressure: 6 bar, distance between side stands: 1,300 mm, stroke length: 180 mm, table length: 1,280 mm, table width: 800 mm, Trimming press SMERAL type LKO 315 Nominal force 315 ton Stroke 180 mm Shut height 530 mm Ram adjustment 115 mm Number of strokes per minute 30 Main table size 1250 x 800 mm Distance between columns 1300 mm Bedpszh Ilbofx Amyodf Sizes L x B x H: 3600 x 1750 x 4600 mm Electric output 25 kW Total weight 17 000 kg

Condition: not inspected (used), functionality: unexamined, Light curtain SICK FGSS300-1 Bjdszkazgjpfx Amyjdf Safety Category: Type 4 1x Transmitter 1x Receiver Supply voltage: 24V +/- 20% Power consumption: 11 W Protection class: IP 65 Protected field width: 6 m Protected field height: 300 mm Response time: 15 ms 1x Control unit LCUX1-400 Requirement level: Type 4 Power consumption: 6 W Response time: 15 ms

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m in length, 2.5 m in width, approx. 2.6 m in height Bodpfjra Dddsx Amyedf Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Construction features large feed opening for cardboard possibility of automatic feeding (e.g., via conveyor) manual wire tying (4 wires) pallet lock and hydraulic doors for bale removal Advantages of this press large bales = fewer transports high pressing force suitable for continuous operation Available production years: 2018–2020

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Bdodpfey S Rqwsx Amyjf Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: excellent (used), Zwick / Roell ProLine Z005 Universal Testing Machine Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Machine Type: Universal Testing Machine / Material Testing Machine Maximum Testing Force: 5 kN Load Cell: Xforce P 5 kN For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile, compression, and material testing in laboratories, quality assurance, research, and development. Technical Data Bdedjzfy Ivopfx Amyof Machine dimensions approx.: 917 x 439 x 1331 mm (W x D x H) Testing width: approx. 440 mm Frame width: approx. 720 mm Frame installation width: approx. 770 mm Machine weight approx.: 200 kg Power connection: 230 V Frequency: 50 / 60 Hz Power consumption: 3.5 A Connection: 1L / PE / N Made in Germany Load Cell Type: Zwick Xforce P Rated force: 5 kN Measurement start, Class 1: 20 N Measurement start, Class 0.5: 100 N Nominal measurement travel: 0.06 mm Protection class: IP54 Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Weight: approx. 0.65 kg Connection thread: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Measuring Module Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measurement value Measurement value acquisition rate: max. 10 kHz Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Machine electronics PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Research and development Laboratory applications Scope of supply Zwick / Roell ProLine Z005 universal testing machine Xforce P 5 kN load cell DCSC measuring module PC system / software as shown in the pictures Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Availability: by arrangement. Scope of supply as shown in the pictures. Changes and errors in the technical data and prior sale reserved.

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Bdodpfx Ameyc H R Tjyjf Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Condition: ready for operation (used), EWM Phoenix 351 Basic Plus KW welding machine Bdedjyh Az Ajpfx Amysf For technical specifications, please refer to image no. 2. You are welcome to visit and inspect the machine. We are happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you supply a valid VAT identification number. Subject to prior sale. Visit our shop and check out our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations from the technical specifications as well as errors in the item description may occur and are subject to change.

Condition: like new (used), ifm distance sensor O1D100-01DLF3KG Like-new optical distance sensor for precise distance measurement in industrial automation and handling applications. Manufacturer: ifm electronic Bdodpfszduuusx Amysf Type: Optical distance sensor Model: O1D100-01DLF3KG Series: O1D Measurement principle: PMD Time-of-Flight Light source: Laser Protection rating: IP67 Output: Switching output Output: Analog output Electrical connection: M12 connector Housing material: Metal/plastic Application: Distance measurement Application: Position detection Application: Presence detection Application: Automation technology Condition: Like new Quantity: 5 pieces available

Year of construction: 2012, condition: good (used), Item: inos iSENS laser sensors with control unit, cable, and PC interface Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone. Bsdpfszdn T Rex Amyodf

Year of construction: 2010, condition: excellent (used), Tension testing device manufacturer: Prema Bedpfx Aofd Encomysdf max. pressure: 100 MPa clamping diameter: 220 mm weight: 12 kg

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum fuse rating: 16A Frequency: 50/60Hz Electrical connection power: 4.5kW Temperature range: +12°C above ambient temperature to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heating time to 150 °C: 25 min Recovery time after 30 s door opening at 150 °C: 6 min Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per insert: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Bodpfx Aexzukkomyedf Maximum number of inserts: 16 External dimensions: Width: 1,165 mm Height: 1,590 mm Depth: 870 mm Internal dimensions: Width: 1,000 mm Height: 1,300 mm Depth: 570 mm Important note: The wheels are installed/included.

Condition: new, Manufacturer: Wenglor Condition: New, without packaging Type: Flow sensor Model: FFAF209 Measuring principle: Calorimetric flow monitoring Bdedpozcw Snofx Amysf Medium: Liquids Output function: Switching output Electrical connection: M12 connector Supply voltage: 18–30 V DC Protection class: IP67 Housing material: Stainless steel Display: Integrated status and switching state indicator Application area: Monitoring of cooling circuits, pump systems, process plants, and industrial fluid applications Mounting type: Direct integration into pipelines and supply systems

Condition: used, ILD2200-40(226), optoNCDT 2200, Micro Epsilon Laser Triangulation Sensor System Model: ILD2200-40(226) Condition: Used Bdjdsq S Spajpfx Amysf