Used Mini Prong Press for sale (33,498)

Condition: excellent (used), lifting height: 16,400 mm, Year of construction: 2019, operating hours: 2,102 h, General information Field of application: Construction Drivetrain Make of engine: Yanmar Weights Empty weight: 2.800 kg Functional Lifting capacity: 3.150 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 3,15x0,75x2 Production country: NL Hjdpfx Afoxpwbbofsg Additional information Please contact Vink Machinery for more information Hoeflon C6 * 2019 * 2102 heures de fonctionnement * Diesel et transmission 230 V * Entièrement équipé * Hauteur de travail de 16,4 mètres * Portée horizontale de 14,4 mètres * Capacité de levage de 3150 kg * Poids net de 2800 kg * Télécommande * Stabilisateurs articulés * Documents inclus

Condition: good (used), Year of construction: 1988, functionality: fully functional, total height: 2,590 mm, total width: 1,270 mm, total length: 2,310 mm, overall weight: 10,150 kg, pressing force: 160 t, power: 11 kW (14.96 HP), input voltage: 400 V, year of last overhaul: 2023, For sale: Used ZTS LE 160 C eccentric press, year of manufacture 1988. The machine is in good technical condition, except for the paint coating. All control solenoid valves were replaced in February 2023. The machine has been seldom used for a long period and has been in our possession for 20 years. Machine number: 2291286 Machine type: LE 160 C Year of manufacture: 1988 Maximum pressing force: 1600 kN Power: 11 kW Hodex Rcgzspfx Affjg Voltage: 400 V Weight: 10,150 kg Total length: 2310 mm Total width: 1270 mm Total height: 2590 mm If you have any questions or need further information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 550 kg, overall weight: 2,450 kg, Used HSM V-Press 1160 Plus vertical press from 2016. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Hsdex Rcfwspfx Affjg We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Hsdpfxowcq Hge Affog Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, FUJI OFFSET with numbering unit, operates very well. Removal to be arranged by buyer, possible to include a guillotine. Low price. Brittany region, France. Hedpfxex Rb R Ss Affeg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,700 h, machine/vehicle number: 0126427-027, Equipment: type plate available, LVD STRIPPIT GLOBAL 30 1225 Turret Press Machine in very good technical condition, used at Alsanit. Regularly serviced only by the manufacturer's service. Service parts used in the service - only new and original. The turret press is in continuous production use. If you are interested, we encourage you to make an appointment to confirm the technical condition and technological capabilities of the offered machine. It is possible to provide a video presenting the operation of the turret press, please send an inquiry with a request for sharing. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of production of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine mileage: 83700rh Maximum pressing force: 300 kN (30 tons) Hodpfx Afowptdujfog Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC :GE FANUC 180 IP Maximum travel in the X axis: 2,576 mm Maximum travel in the Y axis: 1,337 mm Maximum table load (even): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per min (die fi 25 mm); ±2% 400 min-1 Number of strokes per min ("nibbling" function - 2 mm): 1000 min-1 Number of strokes per min (marking/0.5 mm): 1700 min-1 Maximum feed rate (speed) in the X axis: 83 m/min Maximum feed rate (speed) in the Y axis: 73 m/min Number of tool sockets (stations) in the turret: 30 pcs. Station A – max. diameter 12.7 mm: 8 pcs. Station B – max. diameter 31.7 mm: 16 pcs. Station C – max. diameter 50.8 mm: 2 pcs. Station D – max. diameter 88.9 mm: 4 pcs. Number of indexed (rotary) stations in the revolver: 4 pcs. (D stations) Note: A multitool can be placed in each D station (1 multitool has 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Working sheet size: 1,250 x 2,500 mm Number of sheet metal clamps (individually programmable): 3 pcs. Tilting work chute for cut parts: 450 x 500 mm Electric power supply 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Waste conveyor; Brush table The LVD Strippit Global 30 punching machine has 4 programmable rotary stations (size D). Each station can be equipped with a multitool head with automatic rotation. Using a servo drive, as well as CNC control - both the rotary stations and the entire turret have the possibility of bidirectional rotation with an accuracy of 0.01 degrees. The Auto Index rotary stations of the LVD Strippit Global 30 punching machine operate on the principle of direct drives, which are located directly above the station, constituting part of the turret mechanism. In the rotary stations with a diameter of 88.9 mm, a multitool tool holder can be mounted, thus increasing the machine's capabilities and the number of tools. The multitool holders allow for the installation of 3 or 8 punches and dies with a diameter of 12.7 mm or 31.7 mm, respectively. We issue a VAT invoice The price given is a net price!

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 2,974 h, total length: 730 mm, total height: 1,350 mm, total width: 480 mm, overall weight: 85 kg, input voltage: 240 V, input current: 2 A, input frequency: 50 Hz, space requirement length: 730 mm, space requirement height: 1,350 mm, space requirement width: 480 mm, The Perfatory III MiniMultilens from envisiontec, equipped with 2 lenses (interchangeable objectives), is renowned for its precision, smooth surfaces, and fine details with various resin systems. It is a true professional machine designed for the highest quality standards. The interchangeable objectives provide: - f60: a build volume of 85x64x230 mm with a native XY resolution of 60 µm and ERM 30 µm - f85: a build volume of 43x33x230 mm with a native XY resolution of 32 µm and ERM 16 µm Z resolution ranges from 20–150 µm depending on material/resin Light spectrum: UV ( Hodpox Rb Iwofx Affsg

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA65, bending force (max.): 50 t, working width: 1,200 mm, number of axes: 4, overall weight: 4,750 kg, total length: 2,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 8 kW (10.88 HP), input voltage: 400 V, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, foot remote control, For sale: Used TRUMPF TrumaBend V50 press brake, year of manufacture 1997. The machine is in excellent technical condition and is highly reliable. Very precise and repeatable. In February 2024, all valve seals, safety valves, and hydraulic oil with filters were replaced by authorized service. The machine has a very low number of operating hours. Equipped with wiring for ACB sensors. Hydraulics: Hoerbiger Tool type: hydraulic Wila / Trumpf Control unit: DELEM DA65 Number of axes: 4 - Y1, Y2, X, R Number of back gauge fingers: 4 Machine number: 881125 Model: TrumaBend V50 Year of manufacture: 1997 Maximum pressing force: 500 kN Working length: 1200 mm Power: 8 kW Voltage: 400 V Hydraulic system pressure: 290 bar Weight: 4750 kg Overall length: 2500 mm Overall width: 2000 mm Hsdpfx Aex Rcf Deffsg Overall height: 2100 mm If you have any questions or need additional information, please send a message or contact us by phone.

Condition: used, length: 2750width: 1100heigth: 2050weight approx.: 3500pressure: 50bending length: 2550 CNC Bending Press 3 Axes Y1, Y2, and Z Hydraulic Tool Clamping for the Upper Tool Darley System Hodpfxowiatpe Affsg Technical Details: Machine Type: EHP 50.25/20 Max. Pressing Force: 500 kN Bending Length: 2550 mm Downward Speed: 100 mm/s Max. Pressing Speed: 13.5 mm/s Return Speed: 75 mm/s Stroke Length: 120 mm Cylinders: 2 pcs Motor Power: 5.5 kW Oil Tank: 100 Liters

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,400 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: TRUMPF, controller model: TASC 6000, bending force (max.): 230 t, working width: 3,230 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 2,690 mm, installation height: 615 mm, operating speed: 10 mm/s, number of axes: 6, type of crowning: CNC-controlled, oil tank capacity: 330 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 860 mm, overall weight: 16,000 kg, total length: 4,270 mm, total width: 2,120 mm, total height: 3,200 mm, number of support arms: 2, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, + 2 quick-adjustable support consoles on linear guides + 6-axis backgauge system (X1, X2, R1, R2, Z1, Z2) with control cabinet air conditioning + Hydraulic and hardened upper tool clamping + CNC-controlled crowning + Preparation for ACB + BendGuard safety device for 200 mm/s Standard equipment: - Four-cylinder upper drive concept - Electrohydraulic ram drive with proportional valve technology - Ram travel measurement system - Modern block hydraulics - Electronic pressure scale - Spherical suspension and inclination of the pressure beam - CNC backgauge system - Safe forward finger adjustment - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, hydraulic lower tool holder - Flat front cover - Modern safety guard - CE mark - Oil cooler - Control cabinet cooling (air-air) Hodpfox Elxvsx Affsg - Operating manual

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 1800 Measurements depth 3450 mm Measurements height 950 mm Table Hodpfx Aex Nr Ufeffjg Table load 200 kg This BARTH VMPH 3013 laminating press was manufactured in 2015. It features dimensions of 3450 x 1800 x 950 mm and a clamping area of 3000 x 1320 mm. The vacuum table supports up to 200 kg with a maximum vacuum pressure of -0.95 bar. It operates on 400 VAC/50 Hz with a connected load of 12 kVA. Consider the opportunity to buy this BARTH VMPH 3013 laminating press. Contact us for more information about this machine. Application Types Pressing / Laminating

Condition: excellent (used), Stainless Steel Press – Industrial (for Cheese and Food Industry) For sale are professional stainless steel presses, designed for use in the dairy and food processing industry. Suitable for pressing cheese, curd, and similar products. The presses are made entirely of stainless steel, with a solid and stable construction. A mechanical screw system ensures even and precise pressing. Easy to operate, low maintenance, and compliant with hygienic standards. Material: Stainless steel Application: Cheese, curd, food products Condition: Used, in working condition Quantity: 4 units Hedpfxox Rbyms Affsg Price: €600 per unit Individual units or the complete set can be purchased. Ideal for small and medium-sized dairies.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, DIXI 80 SLS horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Hsdpsx Rbuqefx Affeg Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: excellent (used), Catalogue no.: 7815 TECHNICAL DATA Worktable dimensions (L/W): 2900x1200mm Overall table dimensions: 3000x1300mm Operating temperature: ±40-60°C Maximum temperature: ±60°C Total machine power: 5.25kW Vacuum pump power: 0.90kW Vacuum pump capacity: approx. 25/30m3/h Hodpfoxwygcex Affjg Noise level: approx. 70dB Dimensions (L/W/H): 3060x1400x1400mm Weight: 360kg – DTR Documentation – Unpainted – Very good condition – Used press Net price: 21,900 PLN Net price: 5,200 EUR depending on the exchange rate of 4.2 EUR (Prices may change with higher fluctuations)

Condition: used, bending length: 3100pressure: 80motor power: 5,5oil filling: 100 Hjdpfx Asru Unbjffjg

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction Hjdpfxoxayl Ds Affsg - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: good (used), Year of construction: 2001, 3-Axis CNC Press Brake with HACO-Robosoft ATS 590 Graphic Control Manufacturer: HACO, Origin Belgium Model: ERMS 40135 Year of manufacture: 2001 / retrofit in 2008 with ATS 590 Technical data: Press force: 135 t Bending length: 4000 mm Features / Accessories: • 3-axis CNC control HACO ATS 590 Graphic (Y, X, and R axes for stroke depth and back gauge forward/backward + up/down) • Back gauge fingers adjustable together/apart manually • Manual table crowning by handwheel beneath the die with SIKO digital counter; also adjustable in the tool cassettes via wedge Delivery time: 21.01.2026 ex location D-32425 Minden, loaded free on truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Hjdpex Npiyjfx Affeg DE - 44143 Dortmund - Wambel

Condition: used, Drilling machine Optimum B32, good condition, incl. MK4 mounting, 225 mm stop, 125 mm quill stroke Hjdpfx Afjwzzghjfog Price changes, errors, and typographical mistakes reserved.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Hodpfx Afjx Rbtgofsg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: good (used), functionality: fully functional, Year of construction: 1995, operating hours: 32,518 h, control type: CNC control, pressing force: 250 t, Bending length [mm]: 3550 Pressing force [t]: 250 Control: Cybelec DNC 906 PS A Operating hours [h]: 32,518 - Hydraulic quick clamping for punch and die - Hydraulic crowning system via CNC - 2-axis CNC backgauge (X and R) - 4 manually adjustable backgauge fingers Hodpfjxcmwrjx Affeg - 2 movable bending aids - Comprehensive tooling package

Condition: as good as new (ex-display), Demonstration Machine The new 70F briquetting press from Holzprofi impresses with its sophisticated, simple, and robust design. The press is designed for commercial and industrial applications. Made in the EU! Technical data: Motor output (continuous duty): 7.5 kW Briquette diameter: 70 mm Power consumption approx.: 4900 W/h Hjdpfx Aovr I N Seffeg Output capacity: 60–80 kg/h Chip hopper: 0.75 m³ Weight: 810 kg Briquette density approx.: 900–1100 kg/m³ Sound pressure level: less than 70 dB Dimensions: 2220 x 1200 x 1510 mm Standard special equipment: Automatic shaft rotation direction reversal Automatic shutdown Sample image! Price subject to change. Errors and omissions excepted.

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, installation height: 615 mm, pressing force: 320 t, Bending length [mm] 4220.00 Press force [tons] 320 Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Standard equipment: - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed Hodpfx Afjxxbr Aofjg - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Park position + 1 bending aid + Additional foot switch

Condition: good (used), functionality: fully functional, Year of construction: 1997, installation height: 535 mm, pressing force: 85 t, Bending length [mm] 2050.00 Pressing force [t] 85 Control Delem DA 69 Operating hours [h] 76807 Standard equipment: - Upper drive concept in two-cylinder design Y1/Y2 - Electro-hydraulic ram drive in proportional valve technology - Ram travel measuring system with spring compensation via glass scales - Modern block hydraulics - Spherical suspension and inclination of the pressure beam - CNC back stop system - Safe finger adjustment from the front - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool holder - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern protective cover + 6-axis back stop system + Hydraulic upper tool clamping + Hydraulic lower tool clamping Hodpfxewld R De Affog

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication Hjdpfowld Suox Affjg - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management Hedjxhmtwspfx Affsg - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.