Used Mikron Ucp 1350 for sale (185)

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for Hedpfet Hw D Rjx Ag Defr loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: ready for operation (used), Sell due to new acquisition good condition Mikron VC 1000 milling machine Hfodjh Tnpxopfx Ag Dsr

Condition: good (used), Year of construction: 1999, Machine is in good condition. Hfsdpfx Agewx Rafe Dor X 750 mm Y 400 mm Z 500 mm 10.000 rpm

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and immediately ready for operation. Technical data: Year of manufacture: 1997 Hsdpfx Agewx Naqj Defr Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Setup dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organized upon request at an additional charge, Europe-wide. Prices plus VAT. Inspection by appointment possible. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING AND SELLING OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2002, functionality: fully functional, TECHNICAL DATA X-axis travel: 1200 mm Y-axis travel: 600 mm Z-axis travel: 675 mm Spindle speed: 30 - 8000 rpm Tool holder: ISO B 40 Feed rate X/Y/Z: 3000 rpm Rapid traverse X,Y / Z: 24 / 20 m/min MACHINE DETAILS Hfjdew Iqf Sepfx Ag Dsr Voltage: 3 x 400 V AC + PE, 50/60 Hz Control voltage: 24 V DC Connected load: 16 kW Weight: 8000 kg

Condition: used, Year of construction: 1986, operating hours: 66,247 h, functionality: fully functional, travel distance X-axis: 600 mm, The machine is in good condition and still in operation. Year of manufacture: 1986 Process: X 600 / Y/Z 500 On-time: 66,247 hours Remarks: - The price does NOT include any accessories! Hodpfxjwccfhj Ag Defr - Pickup by buyer, from the site. - Pickup date will be agreed upon by the seller. - No warranty - Advance payment (invoice) or cash upon pickup

Condition: used, Year of construction: 1982, x-travel 400 mm Hfsdpeu U Sabefx Ag Dsr y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW weight of the machine ca. 1,5t t

Year of construction: 1995, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible. Hfjdpfx Asw H At Hog Dsr

Condition: good (used), Year of construction: 2015, Machine is in good condition, parts shown by hand not come. X 1025 mm Y 560 mm Hfedjwx N Nfjpfx Ag Dor Z 600 mm Heidenhain TNC 620, 16.000 rpm HSK 63

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg Hfodpfx Aswit Rhog Der You can find more items - new and used - in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2006, operating hours: 21,967 h, functionality: fully functional, machine/vehicle number: 84.34, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, table width: 1,000 mm, table load: 1,100 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 16 °, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS Hfjdpfxevxr Ilj Ag Der X-axis (longitudinal): 1,000 mm Y-axis (transverse): 1,150 mm Z-axis (vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controllable axes: 5 axes Control: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Feeds and travel speeds X and Y axis: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Work table Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg MACHINE DETAILS Machine: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run: 40,095 h Spindle hours: 21,967 h EQUIPMENT - without magnetic table

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate -Transport dimensions: 270/260/H60 mm Hfedpfxsrcnm Ne Ag Djr -Weight: 1.5 kg

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm Hfsdpfx Aot Hwxbjg Dor gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 1995, Travel X/Y/Z: 710mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: 500kg, tool stations: 22, tool holder: SK40, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 4600kg, control: Heidenhain TNC 426. Includes internal coolant supply and external cooling. Documentation available. An on-site inspection is possible. Hodpfow Exr Aox Ag Djfr

Condition: good (used), Parts on table not come. Marked with red. Hfjdpfx Agowxdyxj Dsr

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board Hfjdpfjrc Ilgex Ag Dor -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Hfedew Emx Rjpfx Ag Der

Condition: good (used), Year of construction: 2007, Machine is in good condition, Hjdpfxjwk Nm Is Ag Defr Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Trasfor, transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E Hedokzpmuopfx Ag Defr -Technical data: see photo identification plate -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V Hodokzpm Hspfx Ag Defr -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board -Manufacturer: Mikron, electronic module printed circuit board for operating unit. TCD22 -Type: WW TCD 22 . 104.73.20.041 -Dimensions cardboard: 410/310/H65 mm -Weight: 0.6 kg Hodpfsk Aua Njx Ag Djfr

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer Hfjdpskyy Uqofx Ag Djr -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power: 4.5kVA -Primary: 3x380V -Secondary: 3x95/165 V -Dimensions: 335/135/H350 mm -Weight: 41 kg

Condition: used, CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit from CNC milling machine Mikron UME 600 -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos Hfjdpfx Aercnmwsg Dor -Dimensions: 480/240/H160 mm -Weight: 5.3 kg

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm Hfodpfofbma Nox Ag Dsr -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: used, Angle measuring device, encoder, rotary encoder, absolute rotary encoder -Manufacturer: Heidenhain, angle measuring device with own storage in original packaging Hedpeqrwxasfx Ag Defr -Type: RCN 619.5GS5-19B00 .: 249 003-19 -Quantity: 2x measuring device available -Price per piece -Dimensions of box: 180/140/H90 mm -Weight: 1.0 kg