Used Mikron Ucp 1350 for sale (189)

Condition: good (used), Year of construction: 1986, Mikron milling machine WF 51, manufactured in 1986. Control system: Heidenhain TNC 155 Tool holder: SK 40 Fodpjzr Ubwsfx Ah Esgi Spindle stroke: 110 mm Table size: 1000 x 500 mm Travel distances: x-710, y-500, z-460 mm Spindle speed: 31.5-3150 RPM

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,462 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 20,000 rpm, The machine spindle was replaced in 2022. Since then, the machine has accumulated approximately 6,500 operating hours. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 650 mm Travel range Z-axis: 500 mm Spindle speed range: 0–20,000 rpm Spindle speed control: stepless Tool interface: HSK 63 Magazine capacity: 30 Clamping area: 900 × 600 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,400 x 3,000 mm Weight: 10 t Operating Hours Machine operating hours: 54,796 h Spindle hours: 23,462 h EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Fgsdpfxsz Hwvdo Ah Eoi Operating manuals

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Fsdpjqttt Tjfx Ah Esgi

Condition: excellent (used), Year of construction: 2000, Travel paths X travel: 600 mm Y travel: 450 mm Z travel: 450 mm Fgedpoyvzbnsfx Ah Eji Table size: 850 x 530 mm Working spindle Spindle speed: 100 – 20,000 rpm Tool holder: HSK 63 Tool magazine capacity: 30 slots Machine dimensions: 3900 x 3500 x 2700 mm Weight: 6500 kg

Condition: ready for operation (used), X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible. Fsdpfx Ahszavyre Esgi

Condition: good (used), Milling Machine Mikron WF 32 CH Technical Data: X-axis: 560 mm Y-axis: 500 mm Fgsdjyq Hcrepfx Ah Eei Z-axis: 400 mm Clamping table Clamping surface vertical: 300x450 mm Number of threaded holes: 2 x 6 Speed range: 25-6300 rpm Swivel range vertical milling head: +45°

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Fgodpfx Ahsh Tnpxs Eei

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 400 mm Control Heidenhain turning speeds 3150 U/min table surface area 700x350 mm Table load 400 kg spindle taper ISO 40 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Fsdpfxoyutv He Ah Eogi About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1996, Milling Machine Mikron WF 21C 1996 Technical Data: X-axis: 400 mm Y-axis: 400 mm Fodpfx Ahoyq E I Ts Esgi Z-axis: 400 mm Clamping Table Clamping surface, vertical: 300x450 mm Number of threaded holes: 2 x 6

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 0144, functionality: fully functional, operating hours: 17,716 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 675 mm Fgodpfox Trpqox Ah Eei Work spindle speed: 30 - 8,000 rpm Tool holder: ISO B 40 Table size: 1,220 x 620 mm T-slots: 18 T-slots: 5 x 18 mm T-slot spacing: 100 mm Table load capacity: 1,700 kg Control system: Heidenhain iTNC 530 Feed rate X / Y / Z: 3,000 mm/min Rapid traverse X,Y / Z: 24 / 20 m/min MACHINE DETAILS Voltage: 3 x 400 V AC + PE, 50/60 Hz Control voltage: 24 V DC Connected load: 16 kW Weight: 8,000 kg Operating hours Control on: 44,842 h Machine on: 36,513 h Program run: 15,882 h Drives on: 31,655 h Spindle on: 17,716 h

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] Fodpfxjuhbxaj Ah Ejgi EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Condition: ready for operation (used), Year of construction: 2001, operating hours: 26,897 h, functionality: fully functional, machine/vehicle number: 107.84.01.011, travel distance X-axis: 400 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 350 mm, controller model: Heidenhain TNC 430 M, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Fjdjzf E I Uopfx Ah Eogi Travel range, X-axis: 400 mm Travel range, Y-axis: 240 mm Travel range, Z-axis: 350 mm Feed rate (X/Y/Z-axis): 40 m/min Axis acceleration (X/Y/Z-axis): 10 m/s² Spindle speed max.: 42,000 rpm Spindle torque (40% duty cycle): 4.25 Nm Spindle torque (100% duty cycle): 3.2 Nm Feed rate, B-axis max.: 54,000 °/min Feed rate, C-axis max.: 90,000 °/min Tool interface: HSK-E40 Tool magazine: 18/36/68 tools Tool change time: approx. 10 s Chip-to-chip time: approx. 12.5 s Erowa UPC pallet system (L x W): 320 x 320 mm Workpiece weight max.: 200 kg MACHINE DETAILS Control model: Heidenhain TNC 430 M Spindle power (40% duty cycle): 13 kW Spindle power (100% duty cycle): 10 kW Spindle operating hours: 26,897 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,400 x 2,800 mm Total weight: 6,500 kg EQUIPMENT STEP-TEC spindle, type HVC140-SB-10-15/42-3F-HSK-E40 Erowa UPC pallet system

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 500 mm z-travel 400 mm table-size 900 x 530 mm control Heidenhain TNC 355 tool adaptor ISO 40 | | turning speed range 40- 4000 U/min rapid speed 5 / 6 m/min feed speeds 2 - 3000 | mm/min | power requirement 6 kW Fodpjyxr Hmsfx Ah Ejgi table load 350 kg dimensions 2,6 x 1,8 x 2,2 m weight 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head

Condition: used, Year of construction: 1968, max. wheel diameter 120 mm gear width 130 mm max. module 2 no. of teeth to be hobbed 6-325 Z min/max. spiral pitch 20-5000 mm hobbing length 130 mm weight of the machine ca. 860 kg Universal hobbing machine MIKRON 102.05 MPS > External surface gearing Technical data: Maximum millable workpiece diameter: 120 mm Maximum millable length: 130 mm Maximum number of modules: 2 Number of millable teeth: 6-399 (with gear ratio 80:5) Pitch of the spirals: 20 - 5000 mm Pitch angle of the spirals (left or right): 0 - 90° 14 milling cutter revolutions (50c/s): 140 - 1870 rpm 13 Axial feeds: 0.05 - 3.0 mm/w.p.rev. Main motor speed: 1500 rpm Main motor power: 1.1 kW Connected load: 3 x 380 VAC Frequency: 50 Hz Control unit: Omron CP1L Machine dimensions L/W/H: 1030x800x1520 mm Fgedpfozupliex Ah Eji Weight of the machine: 880 kg

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Fgodpfew Emx Rox Ah Eei

Condition: good (used), Parts shown by hand not come. Fgsdsz Ipaqepfx Ah Eei Machine is in good working condition

Condition: used, control: Heidenhain TNC 155 tool taper: SK 40 quill stroke: 110 mm table size: 1000 x 500 mm Fgjdpfx Ajc Tt Hrsh Eji travel: x-710, y-500, z-460 mm spindle speed: 31,5-3150 rpm accessories: angle table, coolant equipment, div. retainers

Condition: defective spare-parts repository (used), Universal Machining Center - Parts Donor Fedoyzt A Uopfx Ah Esgi Manufacturer: MIKRON Model: HSM 400 U The machine is defective and is being sold as a source of spare parts. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 1996, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 5 rpm, For sale: Mikron UMS 710-900 machining center The machine is in good condition. New ball screw drives for X and Y axes, new cover for Z axis, and new Z-axis spiral. Technical data: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm CNC control: HEIDENHAIN TNC 426 Table size: 1200 x 600 mm Max. table load: 500 kg Spindle mount: SK 40 with ring groove Spindle speed range: 5 – 5,000 rpm Spindle drive power: 11 kW Feed rate range: 0 – 10,000 mm/min Rapid traverse: 10 m/min Operating voltage: 400 V Total connected load: 15 kW Machine weight approx.: 5.0 t Floor space required approx.: 2.40 x 3.40 x 2.30 m Chip tray Fgjdpstt Acgjfx Ah Eji No internal coolant supply (IKZ) 44-position tool changer Handwheel Initial filling with operating fluids for the machine available on request. Loading and transport can be organized throughout Europe for an additional charge. All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options...

Condition: used, EQUIPMENT - With automaton Zellio SR3 type - Tilting loader no. 11 and vibratory bowl Fgodpfouhbqpjx Ah Eoi - part diameter 2.50 to 12.5 [mm] - part length 0.30 to 30 [mm]

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller Fedpfx Ahoztppxs Eegi -Manufacturer: Indramat, AC servo power supply from CNC machining center Mikron VC500D -Type: KDV1-3-100-220/300-W1 -Quantity: 1x Power Supply available -Dimensions: 485/390/H105 mm -Weight: 20.9 kg

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier Fodpowd N S Djfx Ah Eegi -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Fjdeqagugepfx Ah Ejgi

Condition: good (used), PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board Fedpferb E Ewex Ah Eegi -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Condition: good (used), Good condition, parts shown by hand not come. Fgsdpfx Ajz Iphhoh Eji