Used Mikron Hsm 400 for sale (180)

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 min. module total power requirement 20 kW Redpst Hwxbsfx Aahow weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for Rsdot Hw D Ropfx Aahjw loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW Rjdeu U Sabopfx Aahsw weight of the machine ca. 1,5t t

Condition: ready for operation (used), Year of construction: 1998, A Mikron CNC vertical machining center is available. Travel X/Y/Z: 900mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: approx. 500kg, tool holder: SK40, speed: 5000rpm, rapid traverse: 10m/min, feed: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 5000kg, control: Mikron, operating hours: approx. 35580h. The main control board of the machine has a defect. Including approx. 100 SK40 tool holders and tools. An on-site inspection is possible. Rjdpszf Nciefx Aahjw

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, Rodstv Ia Tspfx Aahsw • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Rjdpfx Aorywgzjahew Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: good (used), Year of construction: 2009, 1 used vertical machining center Manufacturer: Mikron Type: HPM 600 HD Year of manufacture: 2009 Control system: Heidenhain ITNC 530 Technical data: Travel ranges: X 650 mm Y 600 mm Z 500 mm Spindle mount: HSK 63 Max. spindle speed: 2000 rpm Table size: 800 x 600 mm Number of tool positions: 30 Equipped with: Laser measurement system Rsdpfx Aaozamngshsw Measuring probe Operating mode: 3+4 axes ITC Intelligent Thermal Control Automatic central lubrication Mobile handwheel Tool air blow-off device Weight: 11 tons

Condition: good (used), Year of construction: 2014, Universal Machining Center Machine type: Mikron HPM 1350 U Control system: Heidenhain iTNC 530 Year of manufacture: 2014 TECHNICAL DATA: Travel ranges: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 700 / 895 mm Rjdpfszarxqox Aahjw B-axis: +16°/-120° A-axis: 360° Swiveling head Number of controlled axes: 5 Spindle speed range: 15,000 rpm Drive power: 38 kW Tool interface: HSK 63 Tool changer Number of tool positions: 48 NC rotary table Table size: Ø 1,100 mm Equipment features: Chip conveyor Internal cooling (IKZ): bar Air through spindle center Oil mist extraction Tool measurement Measuring probe

Condition: used, x-travel 450 mm y-travel 400 mm z-travel 400 mm Control Heidenhain TNC 355 Rjdexv D U Ispfx Aahjw turning speed range 40 - 4000 U/min number of speeds 21 tool taper ISO 40 quill stroke 90 mm feed speeds 2-3000 mm/min rapid traverse longitudinal and cross 6000 m/min rapid traverse Z-axis 5000 m/min distance spindle nose and table 450 mm table travel 495 mm table surface area vertikal 300 x 450 mm fixed clamping table 460 x 800 mm max. loading 350 kp dimensions ca. 3150 x 1800 x 2125 mm weight - pallet system ca. 2380 kg weight of the machine ca. 2,4 t incl. variois tool holders SK 40 manual included

Condition: excellent (used), Year of construction: 2006, X-axis: 1,350 mm Y-axis: 1,150 mm Redpfx Ajzclk Sjahsw Z-axis: 895 mm A-axis: +16 to -120 degrees Rotary table: Diameter 1,100 x 1,000 mm Max. workpiece size: 1,000 x 1,000 x 500 mm Max. table load: 1,600 kg Tool interface: HSK-A63 Tool changer: 46 positions Spindle speed: 24,000 rpm Control system: Heidenhain ITNC 530 Space requirement (including door clearance): 5,605 x 4,290 x 3,159 mm Weight: 12,500 kg Includes coolant system, 40 bar Includes documentation

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 910 x 500 mm Spindle taper SK40 Rodpfx Aeq Dlcioahjw Spindle speeds -10000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 with dividing head Coolant through spindle MARCELS MASCHINEN CH

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Pallete changer EROWA not come. Rodpom Dtnrjfx Aahow

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 1000 x 560 mm Rsdpfx Aozbrrtsahew Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Coolant through spindle 3D measuring tracer Tool lenght measuring device Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, rotational speed (max.): 20,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Rjdpfozbqy Njx Aahsw Width: 2400mm Height: 3200mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1993, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, total height: 2,690 mm, total length: 2,230 mm, total width: 2,360 mm, load capacity: 340 kg, mount diameter: 200 mm, rapid traverse Z-axis: 1 m/min, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, spindle speed (max.): 7,500 rpm, spindle speed (min.): 10 rpm, Micron VCE 750 – Despite its age, the machine is in excellently maintained condition and has only been operated in single-shift use. Rsdpep Sq Trjfx Aahsw Manufacturer: Mikron Model: VCE 750 Year of manufacture: 1993 Control: Mikron CNC (Haas) Travel: X = 750 mm Y = 400 mm Z = 500 mm Spindle speed: 10 – 7,500 rpm Drive power: 7.5 kW Spindle Tool holder: SK 40 Tool changer: 20 tools Rapid traverse: 12.7 m/min Max. feed rate: 5.0 m/min Worktable: 356 x 914 mm clamping surface Max. table load: 340 kg Weight: 3,620 kg Dimensions: 2,230 x 2,360 x 2,690 mm (L x W x H)

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Redpfx Aeqttt Teahew

Condition: good (used), Year of construction: 2004, operating hours: 90,000 h, functionality: fully functional, machine/vehicle number: 6010.0176, Technical Data Manufacturer: MIKRON Rjdpfxszc Hqao Aahsw Model: UCP 800 Duro Year of construction: 2004 Control system: Heidenhain iTNC 530 Travel in X-axis: 800 mm Travel in Y-axis: 650 mm Travel in Z-axis: 500 mm Rotary table 600 x 600 mm Max. table load: 500 kg Rotation range C-axis: 360° Tilting range A-axis: +120° / -100° Rapid traverse X/Y/Z: 30 m/min Spindle manufacturer: Step-Tec AG Spindle type: HVCS212-S-12-1.7/20-2F-HSK-A63 Max. spindle speed: 20,000 rpm Tool interface: HSK-A63 Spindle power: 12 kW (S1) Machine weight: approx. 9,900 kg Connection power: 18 kW Operating voltage: 3x 400V + PE / 50Hz Description For sale is a high-precision 5-axis vertical machining center from the Swiss quality manufacturer MIKRON, model UCP 800 Duro. The machine is in good, well-maintained condition and is equipped with a powerful Step-Tec motor spindle up to 20,000 rpm and a reliable Heidenhain iTNC 530 control system. An integrated BLUM LaserControl system ensures precise tool measurement and breakage monitoring. Special advantage for buyers: The machine is currently still installed and operational. An inspection and a function test can be carried out after prior appointment. Equipment / Highlights ( )5-axis simultaneous machining for complex components Heidenhain iTNC 530 CNC control system with hand-held device Step-Tec high-speed spindle (max. 20,000 rpm) BLUM LaserControl (laser tool monitoring) Chip conveyor including chip cart CE marking available Delivery conditions Condition: Used, fully functional, can be tested while powered on. Location: Sinn, Germany Availability: By arrangement. Dismantling & Transport: The buyer bears the costs for dismantling, loading and transport (ex works / EXW).

Condition: excellent (used), Year of construction: 1987, Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 rpm, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 150, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition Rodjpcf D Iepfx Aahsw

Condition: used, Year of construction: 1991, functionality: fully functional, Mikron A35, complete with accessories, in perfect working order. Rsdpfx Aezcvxyeahew

Condition: used, Year of construction: 2008, • Commissioned: 2008 • Travel ranges X600 / Y450 / Z450 • Heidenhain iTNC 530 control system • Electric handwheel • Step-Tec HSK A63 spindle with 20,000 rpm • Internal cooling, 70 bar • 120-position tool magazine (ATC) • 7-position pallet changer, 3R 280 x 280 Dynafix • Blum laser tool measurement system • 3D probing system, M&H Rjdpjzampqjfx Aahsw • Minimum quantity lubrication system • Band filter system, 600 liters • Chip conveyor • Visiport The machine will be available in October 2026.

Condition: good (used), Mikron WF 41C CNC Universal Milling and Boring Machine Professional, extremely robust MIKRON WF 41C CNC universal milling and boring machine. Thanks to its sturdy construction, the machine is ideally suited for workshops, prototype manufacturing, maintenance, or demanding toolmaking applications. The machine is equipped with the proven HEIDENHAIN TNC 155 contouring control. It is extremely easy to program directly at the machine thanks to plain-language conversational guidance; it supports graphic simulations and allows for the easy loading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical Data Overview CNC Control Model: HEIDENHAIN TNC 155 Operating modes: Manual operation (like digital readout), positioning with manual input, single block, block sequence, program test (graphic simulation) Interface: V.24 / RS-232-C for data transfer Feed Drives & Travel Ranges X-axis travel (table longitudinal, automatic): 630 mm Y-axis travel (spindle slide transverse, automatic): 500 mm Z-axis travel (table vertical, automatic): 460 mm Feed rate: Infinitely variable from 1 – 3000 mm/min in all 3 axes Rapid traverse speed: X- and Y-axis: 6000 mm/min | Z-axis: 4000 mm/min Max. vertical installation height: 559 mm (between vertical milling head and angle table) Milling spindle drive Spindle speeds: 21 gear stages Speed ​​range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M16 with pull stud groove (SK 40 DIN 2080) Quill travel (vertical): 90 mm Table geometry & workpiece capacity Angle table clamping surface: 500 x 1000 mm T-slots: 7 (spacing: 63 mm, width: 14-H7 mm) Vertical clamping surface: 397 x 550 mm (with 4 x 4 M16 threaded holes, 90 mm spacing) Max. recommended workpiece weight: 500 kg Electrics & cooling Electrical connected load: 13.5 kW Coolant tank volume: approx. 100 liters Rsdpozcqf Isfx Aahew Dimensions & weights Machine dimensions (machine only): 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. operating footprint (incl. control arm): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3100 kg (incl. vertical milling head and angle table) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1998, Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the renowned Swiss manufacturer MIKRON, model UM 710/900. The machine comes from a well-maintained environment and stands out for its hallmark Mikron precision and generous working area (up to 900 mm travel in the X-axis). It is ideally suited for toolmaking, prototyping, training purposes, or demanding repair workshops. Technical specifications at a glance (manufacturer data): Working range & axes: Longitudinal travel (X-axis): 710 / 900 mm Cross travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Work spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed ​​range: variable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Clamping table (angle table): Clamping surface: 600 x 1,200 mm T-slots: 9 (14-H7, 63 mm spacing) Max. table load: 500 kg Electrics, dimensions & weights: Connected load: Total installed nominal power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Rodpfx Aezcqcgsahew Coolant system: 150-liter capacity Machine weight: approx. 4,300 kg (incl. protective enclosure) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 1997, x-travel:710 mm y-travel:630 mm z-travel:500 mm turning speed range - spindle:5 - 5000 1/min power - main spindle:11 kW tool taper:SK 40 tool changer:44 Werkzeuge feed:10 m/min surface area:1200 x 600 mm table load:0,5 t total power requirement:15 kVA weight of the machine ca.:4,24 t Rsdpfx Aaelu N Hiehow Toolchanger with 44 tools, pendant handwheel for easy setup.

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm Rodpfxscxxq Ds Aahew z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 total power requirement:7,8 kW weight of the machine ca.:1.8 t dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: used, Year of construction: 1989, machine/vehicle number: 6766, x-travel:560 mm y-travel:500 mm Rjdpfx Aaocxxpqjhew z-travel:400 mm table-size:900 x 530 mm control:Heidenhain TNC 355 B/Q tool taper:ISO 40 / M 16 turning speed range:40 - 4000 U/min rapid traverse X-axis:6 m/min rapid traverse Y-axis:6 m/min rapid traverse Z-axis:5 m/min feeds x/y/z -stepless:2 - 3000 mm/min total power requirement:9 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,6 x 1,8 x 2,2 m